Initial vendor packages

Signed-off-by: Valentin Popov <valentin@popov.link>

1 files changed, 515 insertions, 0 deletions

diff --git a/vendor/memchr/src/vector.rs b/vendor/memchr/src/vector.rs
new file mode 100644
index 0000000..f360176
--- /dev/null
+++ b/vendor/memchr/src/vector.rs
@@ -0,0 +1,515 @@
+/// A trait for describing vector operations used by vectorized searchers.
+///
+/// The trait is highly constrained to low level vector operations needed.
+/// In general, it was invented mostly to be generic over x86's __m128i and
+/// __m256i types. At time of writing, it also supports wasm and aarch64
+/// 128-bit vector types as well.
+///
+/// # Safety
+///
+/// All methods are not safe since they are intended to be implemented using
+/// vendor intrinsics, which are also not safe. Callers must ensure that the
+/// appropriate target features are enabled in the calling function, and that
+/// the current CPU supports them. All implementations should avoid marking the
+/// routines with #[target_feature] and instead mark them as #[inline(always)]
+/// to ensure they get appropriately inlined. (inline(always) cannot be used
+/// with target_feature.)
+pub(crate) trait Vector: Copy + core::fmt::Debug {
+    /// The number of bits in the vector.
+    const BITS: usize;
+    /// The number of bytes in the vector. That is, this is the size of the
+    /// vector in memory.
+    const BYTES: usize;
+    /// The bits that must be zero in order for a `*const u8` pointer to be
+    /// correctly aligned to read vector values.
+    const ALIGN: usize;
+
+    /// The type of the value returned by `Vector::movemask`.
+    ///
+    /// This supports abstracting over the specific representation used in
+    /// order to accommodate different representations in different ISAs.
+    type Mask: MoveMask;
+
+    /// Create a vector with 8-bit lanes with the given byte repeated into each
+    /// lane.
+    unsafe fn splat(byte: u8) -> Self;
+
+    /// Read a vector-size number of bytes from the given pointer. The pointer
+    /// must be aligned to the size of the vector.
+    ///
+    /// # Safety
+    ///
+    /// Callers must guarantee that at least `BYTES` bytes are readable from
+    /// `data` and that `data` is aligned to a `BYTES` boundary.
+    unsafe fn load_aligned(data: *const u8) -> Self;
+
+    /// Read a vector-size number of bytes from the given pointer. The pointer
+    /// does not need to be aligned.
+    ///
+    /// # Safety
+    ///
+    /// Callers must guarantee that at least `BYTES` bytes are readable from
+    /// `data`.
+    unsafe fn load_unaligned(data: *const u8) -> Self;
+
+    /// _mm_movemask_epi8 or _mm256_movemask_epi8
+    unsafe fn movemask(self) -> Self::Mask;
+    /// _mm_cmpeq_epi8 or _mm256_cmpeq_epi8
+    unsafe fn cmpeq(self, vector2: Self) -> Self;
+    /// _mm_and_si128 or _mm256_and_si256
+    unsafe fn and(self, vector2: Self) -> Self;
+    /// _mm_or or _mm256_or_si256
+    unsafe fn or(self, vector2: Self) -> Self;
+    /// Returns true if and only if `Self::movemask` would return a mask that
+    /// contains at least one non-zero bit.
+    unsafe fn movemask_will_have_non_zero(self) -> bool {
+        self.movemask().has_non_zero()
+    }
+}
+
+/// A trait that abstracts over a vector-to-scalar operation called
+/// "move mask."
+///
+/// On x86-64, this is `_mm_movemask_epi8` for SSE2 and `_mm256_movemask_epi8`
+/// for AVX2. It takes a vector of `u8` lanes and returns a scalar where the
+/// `i`th bit is set if and only if the most significant bit in the `i`th lane
+/// of the vector is set. The simd128 ISA for wasm32 also supports this
+/// exact same operation natively.
+///
+/// ... But aarch64 doesn't. So we have to fake it with more instructions and
+/// a slightly different representation. We could do extra work to unify the
+/// representations, but then would require additional costs in the hot path
+/// for `memchr` and `packedpair`. So instead, we abstraction over the specific
+/// representation with this trait an ddefine the operations we actually need.
+pub(crate) trait MoveMask: Copy + core::fmt::Debug {
+    /// Return a mask that is all zeros except for the least significant `n`
+    /// lanes in a corresponding vector.
+    fn all_zeros_except_least_significant(n: usize) -> Self;
+
+    /// Returns true if and only if this mask has a a non-zero bit anywhere.
+    fn has_non_zero(self) -> bool;
+
+    /// Returns the number of bits set to 1 in this mask.
+    fn count_ones(self) -> usize;
+
+    /// Does a bitwise `and` operation between `self` and `other`.
+    fn and(self, other: Self) -> Self;
+
+    /// Does a bitwise `or` operation between `self` and `other`.
+    fn or(self, other: Self) -> Self;
+
+    /// Returns a mask that is equivalent to `self` but with the least
+    /// significant 1-bit set to 0.
+    fn clear_least_significant_bit(self) -> Self;
+
+    /// Returns the offset of the first non-zero lane this mask represents.
+    fn first_offset(self) -> usize;
+
+    /// Returns the offset of the last non-zero lane this mask represents.
+    fn last_offset(self) -> usize;
+}
+
+/// This is a "sensible" movemask implementation where each bit represents
+/// whether the most significant bit is set in each corresponding lane of a
+/// vector. This is used on x86-64 and wasm, but such a mask is more expensive
+/// to get on aarch64 so we use something a little different.
+///
+/// We call this "sensible" because this is what we get using native sse/avx
+/// movemask instructions. But neon has no such native equivalent.
+#[derive(Clone, Copy, Debug)]
+pub(crate) struct SensibleMoveMask(u32);
+
+impl SensibleMoveMask {
+    /// Get the mask in a form suitable for computing offsets.
+    ///
+    /// Basically, this normalizes to little endian. On big endian, this swaps
+    /// the bytes.
+    #[inline(always)]
+    fn get_for_offset(self) -> u32 {
+        #[cfg(target_endian = "big")]
+        {
+            self.0.swap_bytes()
+        }
+        #[cfg(target_endian = "little")]
+        {
+            self.0
+        }
+    }
+}
+
+impl MoveMask for SensibleMoveMask {
+    #[inline(always)]
+    fn all_zeros_except_least_significant(n: usize) -> SensibleMoveMask {
+        debug_assert!(n < 32);
+        SensibleMoveMask(!((1 << n) - 1))
+    }
+
+    #[inline(always)]
+    fn has_non_zero(self) -> bool {
+        self.0 != 0
+    }
+
+    #[inline(always)]
+    fn count_ones(self) -> usize {
+        self.0.count_ones() as usize
+    }
+
+    #[inline(always)]
+    fn and(self, other: SensibleMoveMask) -> SensibleMoveMask {
+        SensibleMoveMask(self.0 & other.0)
+    }
+
+    #[inline(always)]
+    fn or(self, other: SensibleMoveMask) -> SensibleMoveMask {
+        SensibleMoveMask(self.0 | other.0)
+    }
+
+    #[inline(always)]
+    fn clear_least_significant_bit(self) -> SensibleMoveMask {
+        SensibleMoveMask(self.0 & (self.0 - 1))
+    }
+
+    #[inline(always)]
+    fn first_offset(self) -> usize {
+        // We are dealing with little endian here (and if we aren't, we swap
+        // the bytes so we are in practice), where the most significant byte
+        // is at a higher address. That means the least significant bit that
+        // is set corresponds to the position of our first matching byte.
+        // That position corresponds to the number of zeros after the least
+        // significant bit.
+        self.get_for_offset().trailing_zeros() as usize
+    }
+
+    #[inline(always)]
+    fn last_offset(self) -> usize {
+        // We are dealing with little endian here (and if we aren't, we swap
+        // the bytes so we are in practice), where the most significant byte is
+        // at a higher address. That means the most significant bit that is set
+        // corresponds to the position of our last matching byte. The position
+        // from the end of the mask is therefore the number of leading zeros
+        // in a 32 bit integer, and the position from the start of the mask is
+        // therefore 32 - (leading zeros) - 1.
+        32 - self.get_for_offset().leading_zeros() as usize - 1
+    }
+}
+
+#[cfg(target_arch = "x86_64")]
+mod x86sse2 {
+    use core::arch::x86_64::*;
+
+    use super::{SensibleMoveMask, Vector};
+
+    impl Vector for __m128i {
+        const BITS: usize = 128;
+        const BYTES: usize = 16;
+        const ALIGN: usize = Self::BYTES - 1;
+
+        type Mask = SensibleMoveMask;
+
+        #[inline(always)]
+        unsafe fn splat(byte: u8) -> __m128i {
+            _mm_set1_epi8(byte as i8)
+        }
+
+        #[inline(always)]
+        unsafe fn load_aligned(data: *const u8) -> __m128i {
+            _mm_load_si128(data as *const __m128i)
+        }
+
+        #[inline(always)]
+        unsafe fn load_unaligned(data: *const u8) -> __m128i {
+            _mm_loadu_si128(data as *const __m128i)
+        }
+
+        #[inline(always)]
+        unsafe fn movemask(self) -> SensibleMoveMask {
+            SensibleMoveMask(_mm_movemask_epi8(self) as u32)
+        }
+
+        #[inline(always)]
+        unsafe fn cmpeq(self, vector2: Self) -> __m128i {
+            _mm_cmpeq_epi8(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn and(self, vector2: Self) -> __m128i {
+            _mm_and_si128(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn or(self, vector2: Self) -> __m128i {
+            _mm_or_si128(self, vector2)
+        }
+    }
+}
+
+#[cfg(target_arch = "x86_64")]
+mod x86avx2 {
+    use core::arch::x86_64::*;
+
+    use super::{SensibleMoveMask, Vector};
+
+    impl Vector for __m256i {
+        const BITS: usize = 256;
+        const BYTES: usize = 32;
+        const ALIGN: usize = Self::BYTES - 1;
+
+        type Mask = SensibleMoveMask;
+
+        #[inline(always)]
+        unsafe fn splat(byte: u8) -> __m256i {
+            _mm256_set1_epi8(byte as i8)
+        }
+
+        #[inline(always)]
+        unsafe fn load_aligned(data: *const u8) -> __m256i {
+            _mm256_load_si256(data as *const __m256i)
+        }
+
+        #[inline(always)]
+        unsafe fn load_unaligned(data: *const u8) -> __m256i {
+            _mm256_loadu_si256(data as *const __m256i)
+        }
+
+        #[inline(always)]
+        unsafe fn movemask(self) -> SensibleMoveMask {
+            SensibleMoveMask(_mm256_movemask_epi8(self) as u32)
+        }
+
+        #[inline(always)]
+        unsafe fn cmpeq(self, vector2: Self) -> __m256i {
+            _mm256_cmpeq_epi8(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn and(self, vector2: Self) -> __m256i {
+            _mm256_and_si256(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn or(self, vector2: Self) -> __m256i {
+            _mm256_or_si256(self, vector2)
+        }
+    }
+}
+
+#[cfg(target_arch = "aarch64")]
+mod aarch64neon {
+    use core::arch::aarch64::*;
+
+    use super::{MoveMask, Vector};
+
+    impl Vector for uint8x16_t {
+        const BITS: usize = 128;
+        const BYTES: usize = 16;
+        const ALIGN: usize = Self::BYTES - 1;
+
+        type Mask = NeonMoveMask;
+
+        #[inline(always)]
+        unsafe fn splat(byte: u8) -> uint8x16_t {
+            vdupq_n_u8(byte)
+        }
+
+        #[inline(always)]
+        unsafe fn load_aligned(data: *const u8) -> uint8x16_t {
+            // I've tried `data.cast::<uint8x16_t>().read()` instead, but
+            // couldn't observe any benchmark differences.
+            Self::load_unaligned(data)
+        }
+
+        #[inline(always)]
+        unsafe fn load_unaligned(data: *const u8) -> uint8x16_t {
+            vld1q_u8(data)
+        }
+
+        #[inline(always)]
+        unsafe fn movemask(self) -> NeonMoveMask {
+            let asu16s = vreinterpretq_u16_u8(self);
+            let mask = vshrn_n_u16(asu16s, 4);
+            let asu64 = vreinterpret_u64_u8(mask);
+            let scalar64 = vget_lane_u64(asu64, 0);
+            NeonMoveMask(scalar64 & 0x8888888888888888)
+        }
+
+        #[inline(always)]
+        unsafe fn cmpeq(self, vector2: Self) -> uint8x16_t {
+            vceqq_u8(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn and(self, vector2: Self) -> uint8x16_t {
+            vandq_u8(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn or(self, vector2: Self) -> uint8x16_t {
+            vorrq_u8(self, vector2)
+        }
+
+        /// This is the only interesting implementation of this routine.
+        /// Basically, instead of doing the "shift right narrow" dance, we use
+        /// adajacent folding max to determine whether there are any non-zero
+        /// bytes in our mask. If there are, *then* we'll do the "shift right
+        /// narrow" dance. In benchmarks, this does lead to slightly better
+        /// throughput, but the win doesn't appear huge.
+        #[inline(always)]
+        unsafe fn movemask_will_have_non_zero(self) -> bool {
+            let low = vreinterpretq_u64_u8(vpmaxq_u8(self, self));
+            vgetq_lane_u64(low, 0) != 0
+        }
+    }
+
+    /// Neon doesn't have a `movemask` that works like the one in x86-64, so we
+    /// wind up using a different method[1]. The different method also produces
+    /// a mask, but 4 bits are set in the neon case instead of a single bit set
+    /// in the x86-64 case. We do an extra step to zero out 3 of the 4 bits,
+    /// but we still wind up with at least 3 zeroes between each set bit. This
+    /// generally means that we need to do some division by 4 before extracting
+    /// offsets.
+    ///
+    /// In fact, the existence of this type is the entire reason that we have
+    /// the `MoveMask` trait in the first place. This basically lets us keep
+    /// the different representations of masks without being forced to unify
+    /// them into a single representation, which could result in extra and
+    /// unnecessary work.
+    ///
+    /// [1]: https://community.arm.com/arm-community-blogs/b/infrastructure-solutions-blog/posts/porting-x86-vector-bitmask-optimizations-to-arm-neon
+    #[derive(Clone, Copy, Debug)]
+    pub(crate) struct NeonMoveMask(u64);
+
+    impl NeonMoveMask {
+        /// Get the mask in a form suitable for computing offsets.
+        ///
+        /// Basically, this normalizes to little endian. On big endian, this
+        /// swaps the bytes.
+        #[inline(always)]
+        fn get_for_offset(self) -> u64 {
+            #[cfg(target_endian = "big")]
+            {
+                self.0.swap_bytes()
+            }
+            #[cfg(target_endian = "little")]
+            {
+                self.0
+            }
+        }
+    }
+
+    impl MoveMask for NeonMoveMask {
+        #[inline(always)]
+        fn all_zeros_except_least_significant(n: usize) -> NeonMoveMask {
+            debug_assert!(n < 16);
+            NeonMoveMask(!(((1 << n) << 2) - 1))
+        }
+
+        #[inline(always)]
+        fn has_non_zero(self) -> bool {
+            self.0 != 0
+        }
+
+        #[inline(always)]
+        fn count_ones(self) -> usize {
+            self.0.count_ones() as usize
+        }
+
+        #[inline(always)]
+        fn and(self, other: NeonMoveMask) -> NeonMoveMask {
+            NeonMoveMask(self.0 & other.0)
+        }
+
+        #[inline(always)]
+        fn or(self, other: NeonMoveMask) -> NeonMoveMask {
+            NeonMoveMask(self.0 | other.0)
+        }
+
+        #[inline(always)]
+        fn clear_least_significant_bit(self) -> NeonMoveMask {
+            NeonMoveMask(self.0 & (self.0 - 1))
+        }
+
+        #[inline(always)]
+        fn first_offset(self) -> usize {
+            // We are dealing with little endian here (and if we aren't,
+            // we swap the bytes so we are in practice), where the most
+            // significant byte is at a higher address. That means the least
+            // significant bit that is set corresponds to the position of our
+            // first matching byte. That position corresponds to the number of
+            // zeros after the least significant bit.
+            //
+            // Note that unlike `SensibleMoveMask`, this mask has its bits
+            // spread out over 64 bits instead of 16 bits (for a 128 bit
+            // vector). Namely, where as x86-64 will turn
+            //
+            //   0x00 0xFF 0x00 0x00 0xFF
+            //
+            // into 10010, our neon approach will turn it into
+            //
+            //   10000000000010000000
+            //
+            // And this happens because neon doesn't have a native `movemask`
+            // instruction, so we kind of fake it[1]. Thus, we divide the
+            // number of trailing zeros by 4 to get the "real" offset.
+            //
+            // [1]: https://community.arm.com/arm-community-blogs/b/infrastructure-solutions-blog/posts/porting-x86-vector-bitmask-optimizations-to-arm-neon
+            (self.get_for_offset().trailing_zeros() >> 2) as usize
+        }
+
+        #[inline(always)]
+        fn last_offset(self) -> usize {
+            // See comment in `first_offset` above. This is basically the same,
+            // but coming from the other direction.
+            16 - (self.get_for_offset().leading_zeros() >> 2) as usize - 1
+        }
+    }
+}
+
+#[cfg(target_arch = "wasm32")]
+mod wasm_simd128 {
+    use core::arch::wasm32::*;
+
+    use super::{SensibleMoveMask, Vector};
+
+    impl Vector for v128 {
+        const BITS: usize = 128;
+        const BYTES: usize = 16;
+        const ALIGN: usize = Self::BYTES - 1;
+
+        type Mask = SensibleMoveMask;
+
+        #[inline(always)]
+        unsafe fn splat(byte: u8) -> v128 {
+            u8x16_splat(byte)
+        }
+
+        #[inline(always)]
+        unsafe fn load_aligned(data: *const u8) -> v128 {
+            *data.cast()
+        }
+
+        #[inline(always)]
+        unsafe fn load_unaligned(data: *const u8) -> v128 {
+            v128_load(data.cast())
+        }
+
+        #[inline(always)]
+        unsafe fn movemask(self) -> SensibleMoveMask {
+            SensibleMoveMask(u8x16_bitmask(self).into())
+        }
+
+        #[inline(always)]
+        unsafe fn cmpeq(self, vector2: Self) -> v128 {
+            u8x16_eq(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn and(self, vector2: Self) -> v128 {
+            v128_and(self, vector2)
+        }
+
+        #[inline(always)]
+        unsafe fn or(self, vector2: Self) -> v128 {
+            v128_or(self, vector2)
+        }
+    }
+}