diff options
Diffstat (limited to 'vendor/bitflags/CHANGELOG.md')
| -rw-r--r-- | vendor/bitflags/CHANGELOG.md | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/vendor/bitflags/CHANGELOG.md b/vendor/bitflags/CHANGELOG.md new file mode 100644 index 0000000..5081ed5 --- /dev/null +++ b/vendor/bitflags/CHANGELOG.md @@ -0,0 +1,442 @@ +# 2.4.1 + +## What's Changed +* Allow some new pedantic clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/380 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.4.0...2.4.1 + +# 2.4.0 + +## What's Changed +* Remove html_root_url by @eldruin in https://github.com/bitflags/bitflags/pull/368 +* Support unnamed flags by @KodrAus in https://github.com/bitflags/bitflags/pull/371 +* Update smoke test to verify all Clippy and rustc lints by @MitMaro in https://github.com/bitflags/bitflags/pull/374 +* Specify the behavior of bitflags by @KodrAus in https://github.com/bitflags/bitflags/pull/369 + +## New Contributors +* @eldruin made their first contribution in https://github.com/bitflags/bitflags/pull/368 +* @MitMaro made their first contribution in https://github.com/bitflags/bitflags/pull/374 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.3...2.4.0 + +# 2.3.3 + +## Changes to `-=` + +The `-=` operator was incorrectly changed to truncate bits that didn't correspond to valid flags in `2.3.0`. This has +been fixed up so it once again behaves the same as `-` and `difference`. + +## Changes to `!` + +The `!` operator previously called `Self::from_bits_truncate`, which would truncate any bits that only partially +overlapped with a valid flag. It will now use `bits & Self::all().bits()`, so any bits that overlap any bits +specified by any flag will be respected. This is unlikely to have any practical implications, but enables defining +a flag like `const ALL = !0` as a way to signal that any bit pattern is a known set of flags. + +## Changes to formatting + +Zero-valued flags will never be printed. You'll either get `0x0` for empty flags using debug formatting, or the +set of flags with zero-valued flags omitted for others. + +Composite flags will no longer be redundantly printed if there are extra bits to print at the end that don't correspond +to a valid flag. + +## What's Changed +* Fix up incorrect sub assign behavior and other cleanups by @KodrAus in https://github.com/bitflags/bitflags/pull/366 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.2...2.3.3 + +# 2.3.2 + +## What's Changed +* [doc] [src/lib.rs] delete redundant path prefix by @OccupyMars2025 in https://github.com/bitflags/bitflags/pull/361 + +## New Contributors +* @OccupyMars2025 made their first contribution in https://github.com/bitflags/bitflags/pull/361 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.1...2.3.2 + +# 2.3.1 + +## What's Changed +* Fix Self in flags value expressions by @KodrAus in https://github.com/bitflags/bitflags/pull/355 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.0...2.3.1 + +# 2.3.0 + +## What's Changed +* Support ejecting flags types from the bitflags macro by @KodrAus in https://github.com/bitflags/bitflags/pull/351 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.2.1...2.3.0 + +# 2.2.1 + +## What's Changed +* Refactor attribute filtering to apply per-flag by @KodrAus in https://github.com/bitflags/bitflags/pull/345 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.2.0...2.2.1 + +# 2.2.0 + +## What's Changed +* Create SECURITY.md by @KodrAus in https://github.com/bitflags/bitflags/pull/338 +* add docs to describe the behavior of multi-bit flags by @nicholasbishop in https://github.com/bitflags/bitflags/pull/340 +* Add support for bytemuck by @KodrAus in https://github.com/bitflags/bitflags/pull/336 +* Add a top-level macro for filtering attributes by @KodrAus in https://github.com/bitflags/bitflags/pull/341 + +## New Contributors +* @nicholasbishop made their first contribution in https://github.com/bitflags/bitflags/pull/340 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.1.0...2.2.0 + +# 2.1.0 + +## What's Changed +* Add docs for the internal Field0 and examples of formatting/parsing by @KodrAus in https://github.com/bitflags/bitflags/pull/328 +* Add support for arbitrary by @KodrAus in https://github.com/bitflags/bitflags/pull/324 +* Fix up missing docs for consts within consts by @KodrAus in https://github.com/bitflags/bitflags/pull/330 +* Ignore clippy lint in generated code by @Jake-Shadle in https://github.com/bitflags/bitflags/pull/331 + +## New Contributors +* @Jake-Shadle made their first contribution in https://github.com/bitflags/bitflags/pull/331 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.2...2.1.0 + +# 2.0.2 + +## What's Changed +* Fix up missing isize and usize Bits impls by @KodrAus in https://github.com/bitflags/bitflags/pull/321 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.1...2.0.2 + +# 2.0.1 + +## What's Changed +* Fix up some docs issues by @KodrAus in https://github.com/bitflags/bitflags/pull/309 +* Make empty_flag() const. by @tormeh in https://github.com/bitflags/bitflags/pull/313 +* Fix formatting of multi-bit flags with partial overlap by @KodrAus in https://github.com/bitflags/bitflags/pull/316 + +## New Contributors +* @tormeh made their first contribution in https://github.com/bitflags/bitflags/pull/313 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0...2.0.1 + +# 2.0.0 + +## What's Changed +* Fix a typo and call out MSRV bump by @KodrAus in https://github.com/bitflags/bitflags/pull/259 +* BitFlags trait by @arturoc in https://github.com/bitflags/bitflags/pull/220 +* Add a hidden trait to discourage manual impls of BitFlags by @KodrAus in https://github.com/bitflags/bitflags/pull/261 +* Sanitize `Ok` by @konsumlamm in https://github.com/bitflags/bitflags/pull/266 +* Fix bug in `Debug` implementation by @konsumlamm in https://github.com/bitflags/bitflags/pull/268 +* Fix a typo in the generated documentation by @wackbyte in https://github.com/bitflags/bitflags/pull/271 +* Use SPDX license format by @atouchet in https://github.com/bitflags/bitflags/pull/272 +* serde tests fail in CI by @arturoc in https://github.com/bitflags/bitflags/pull/277 +* Fix beta test output by @KodrAus in https://github.com/bitflags/bitflags/pull/279 +* Add example to the README.md file by @tiaanl in https://github.com/bitflags/bitflags/pull/270 +* Iterator over all the enabled options by @arturoc in https://github.com/bitflags/bitflags/pull/278 +* from_bits_(truncate) fail with composite flags by @arturoc in https://github.com/bitflags/bitflags/pull/276 +* Add more platform coverage to CI by @KodrAus in https://github.com/bitflags/bitflags/pull/280 +* rework the way cfgs are handled by @KodrAus in https://github.com/bitflags/bitflags/pull/281 +* Split generated code into two types by @KodrAus in https://github.com/bitflags/bitflags/pull/282 +* expose bitflags iters using nameable types by @KodrAus in https://github.com/bitflags/bitflags/pull/286 +* Support creating flags from their names by @KodrAus in https://github.com/bitflags/bitflags/pull/287 +* Update README.md by @KodrAus in https://github.com/bitflags/bitflags/pull/288 +* Prepare for 2.0.0-rc.1 release by @KodrAus in https://github.com/bitflags/bitflags/pull/289 +* Add missing "if" to contains doc-comment in traits.rs by @rusty-snake in https://github.com/bitflags/bitflags/pull/291 +* Forbid unsafe_code by @fintelia in https://github.com/bitflags/bitflags/pull/294 +* serde: enable no-std support by @nim65s in https://github.com/bitflags/bitflags/pull/296 +* Add a parser for flags formatted as bar-separated-values by @KodrAus in https://github.com/bitflags/bitflags/pull/297 +* Prepare for 2.0.0-rc.2 release by @KodrAus in https://github.com/bitflags/bitflags/pull/299 +* Use strip_prefix instead of starts_with + slice by @QuinnPainter in https://github.com/bitflags/bitflags/pull/301 +* Fix up some clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/302 +* Prepare for 2.0.0-rc.3 release by @KodrAus in https://github.com/bitflags/bitflags/pull/303 +* feat: Add minimum permissions to rust.yml workflow by @gabibguti in https://github.com/bitflags/bitflags/pull/305 + +## New Contributors +* @wackbyte made their first contribution in https://github.com/bitflags/bitflags/pull/271 +* @atouchet made their first contribution in https://github.com/bitflags/bitflags/pull/272 +* @tiaanl made their first contribution in https://github.com/bitflags/bitflags/pull/270 +* @rusty-snake made their first contribution in https://github.com/bitflags/bitflags/pull/291 +* @fintelia made their first contribution in https://github.com/bitflags/bitflags/pull/294 +* @nim65s made their first contribution in https://github.com/bitflags/bitflags/pull/296 +* @QuinnPainter made their first contribution in https://github.com/bitflags/bitflags/pull/301 +* @gabibguti made their first contribution in https://github.com/bitflags/bitflags/pull/305 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/1.3.2...2.0.0 + +# 2.0.0-rc.3 + +## What's Changed +* Use strip_prefix instead of starts_with + slice by @QuinnPainter in https://github.com/bitflags/bitflags/pull/301 +* Fix up some clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/302 + +## New Contributors +* @QuinnPainter made their first contribution in https://github.com/bitflags/bitflags/pull/301 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0-rc.2...2.0.0-rc.3 + +# 2.0.0-rc.2 + +## Changes to `serde` serialization + +**⚠️ NOTE ⚠️** This release changes the default serialization you'll get if you `#[derive(Serialize, Deserialize)]` +on your generated flags types. It will now use a formatted string for human-readable formats and the underlying bits +type for compact formats. + +To keep the old behavior, see the [`bitflags-serde-legacy`](https://github.com/KodrAus/bitflags-serde-legacy) library. + +## What's Changed + +* Add missing "if" to contains doc-comment in traits.rs by @rusty-snake in https://github.com/bitflags/bitflags/pull/291 +* Forbid unsafe_code by @fintelia in https://github.com/bitflags/bitflags/pull/294 +* serde: enable no-std support by @nim65s in https://github.com/bitflags/bitflags/pull/296 +* Add a parser for flags formatted as bar-separated-values by @KodrAus in https://github.com/bitflags/bitflags/pull/297 + +## New Contributors +* @rusty-snake made their first contribution in https://github.com/bitflags/bitflags/pull/291 +* @fintelia made their first contribution in https://github.com/bitflags/bitflags/pull/294 +* @nim65s made their first contribution in https://github.com/bitflags/bitflags/pull/296 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0-rc.1...2.0.0-rc.2 + +# 2.0.0-rc.1 + +This is a big release including a few years worth of work on a new `BitFlags` trait, iteration, and better macro organization for future extensibility. + +## What's Changed +* Fix a typo and call out MSRV bump by @KodrAus in https://github.com/bitflags/bitflags/pull/259 +* BitFlags trait by @arturoc in https://github.com/bitflags/bitflags/pull/220 +* Add a hidden trait to discourage manual impls of BitFlags by @KodrAus in https://github.com/bitflags/bitflags/pull/261 +* Sanitize `Ok` by @konsumlamm in https://github.com/bitflags/bitflags/pull/266 +* Fix bug in `Debug` implementation by @konsumlamm in https://github.com/bitflags/bitflags/pull/268 +* Fix a typo in the generated documentation by @wackbyte in https://github.com/bitflags/bitflags/pull/271 +* Use SPDX license format by @atouchet in https://github.com/bitflags/bitflags/pull/272 +* serde tests fail in CI by @arturoc in https://github.com/bitflags/bitflags/pull/277 +* Fix beta test output by @KodrAus in https://github.com/bitflags/bitflags/pull/279 +* Add example to the README.md file by @tiaanl in https://github.com/bitflags/bitflags/pull/270 +* Iterator over all the enabled options by @arturoc in https://github.com/bitflags/bitflags/pull/278 +* from_bits_(truncate) fail with composite flags by @arturoc in https://github.com/bitflags/bitflags/pull/276 +* Add more platform coverage to CI by @KodrAus in https://github.com/bitflags/bitflags/pull/280 +* rework the way cfgs are handled by @KodrAus in https://github.com/bitflags/bitflags/pull/281 +* Split generated code into two types by @KodrAus in https://github.com/bitflags/bitflags/pull/282 +* expose bitflags iters using nameable types by @KodrAus in https://github.com/bitflags/bitflags/pull/286 +* Support creating flags from their names by @KodrAus in https://github.com/bitflags/bitflags/pull/287 +* Update README.md by @KodrAus in https://github.com/bitflags/bitflags/pull/288 + +## New Contributors +* @wackbyte made their first contribution in https://github.com/bitflags/bitflags/pull/271 +* @atouchet made their first contribution in https://github.com/bitflags/bitflags/pull/272 +* @tiaanl made their first contribution in https://github.com/bitflags/bitflags/pull/270 + +**Full Changelog**: https://github.com/bitflags/bitflags/compare/1.3.2...2.0.0-rc.1 + +# 1.3.2 + +- Allow `non_snake_case` in generated flags types ([#256]) + +[#256]: https://github.com/bitflags/bitflags/pull/256 + +# 1.3.1 + +- Revert unconditional `#[repr(transparent)]` ([#252]) + +[#252]: https://github.com/bitflags/bitflags/pull/252 + +# 1.3.0 (yanked) + +**This release bumps the Minimum Supported Rust Version to `1.46.0`** + +- Add `#[repr(transparent)]` ([#187]) + +- End `empty` doc comment with full stop ([#202]) + +- Fix typo in crate root docs ([#206]) + +- Document from_bits_unchecked unsafety ([#207]) + +- Let `is_all` ignore extra bits ([#211]) + +- Allows empty flag definition ([#225]) + +- Making crate accessible from std ([#227]) + +- Make `from_bits` a const fn ([#229]) + +- Allow multiple bitflags structs in one macro invocation ([#235]) + +- Add named functions to perform set operations ([#244]) + +- Fix typos in method docs ([#245]) + +- Modernization of the `bitflags` macro to take advantage of newer features and 2018 idioms ([#246]) + +- Fix regression (in an unreleased feature) and simplify tests ([#247]) + +- Use `Self` and fix bug when overriding `stringify!` ([#249]) + +[#187]: https://github.com/bitflags/bitflags/pull/187 +[#202]: https://github.com/bitflags/bitflags/pull/202 +[#206]: https://github.com/bitflags/bitflags/pull/206 +[#207]: https://github.com/bitflags/bitflags/pull/207 +[#211]: https://github.com/bitflags/bitflags/pull/211 +[#225]: https://github.com/bitflags/bitflags/pull/225 +[#227]: https://github.com/bitflags/bitflags/pull/227 +[#229]: https://github.com/bitflags/bitflags/pull/229 +[#235]: https://github.com/bitflags/bitflags/pull/235 +[#244]: https://github.com/bitflags/bitflags/pull/244 +[#245]: https://github.com/bitflags/bitflags/pull/245 +[#246]: https://github.com/bitflags/bitflags/pull/246 +[#247]: https://github.com/bitflags/bitflags/pull/247 +[#249]: https://github.com/bitflags/bitflags/pull/249 + +# 1.2.1 + +- Remove extraneous `#[inline]` attributes ([#194]) + +[#194]: https://github.com/bitflags/bitflags/pull/194 + +# 1.2.0 + +- Fix typo: {Lower, Upper}Exp - {Lower, Upper}Hex ([#183]) + +- Add support for "unknown" bits ([#188]) + +[#183]: https://github.com/rust-lang-nursery/bitflags/pull/183 +[#188]: https://github.com/rust-lang-nursery/bitflags/pull/188 + +# 1.1.0 + +This is a re-release of `1.0.5`, which was yanked due to a bug in the RLS. + +# 1.0.5 + +- Use compiletest_rs flags supported by stable toolchain ([#171]) + +- Put the user provided attributes first ([#173]) + +- Make bitflags methods `const` on newer compilers ([#175]) + +[#171]: https://github.com/rust-lang-nursery/bitflags/pull/171 +[#173]: https://github.com/rust-lang-nursery/bitflags/pull/173 +[#175]: https://github.com/rust-lang-nursery/bitflags/pull/175 + +# 1.0.4 + +- Support Rust 2018 style macro imports ([#165]) + + ```rust + use bitflags::bitflags; + ``` + +[#165]: https://github.com/rust-lang-nursery/bitflags/pull/165 + +# 1.0.3 + +- Improve zero value flag handling and documentation ([#157]) + +[#157]: https://github.com/rust-lang-nursery/bitflags/pull/157 + +# 1.0.2 + +- 30% improvement in compile time of bitflags crate ([#156]) + +- Documentation improvements ([#153]) + +- Implementation cleanup ([#149]) + +[#156]: https://github.com/rust-lang-nursery/bitflags/pull/156 +[#153]: https://github.com/rust-lang-nursery/bitflags/pull/153 +[#149]: https://github.com/rust-lang-nursery/bitflags/pull/149 + +# 1.0.1 +- Add support for `pub(restricted)` specifier on the bitflags struct ([#135]) +- Optimize performance of `all()` when called from a separate crate ([#136]) + +[#135]: https://github.com/rust-lang-nursery/bitflags/pull/135 +[#136]: https://github.com/rust-lang-nursery/bitflags/pull/136 + +# 1.0.0 +- **[breaking change]** Macro now generates [associated constants](https://doc.rust-lang.org/reference/items.html#associated-constants) ([#24]) + +- **[breaking change]** Minimum supported version is Rust **1.20**, due to usage of associated constants + +- After being broken in 0.9, the `#[deprecated]` attribute is now supported again ([#112]) + +- Other improvements to unit tests and documentation ([#106] and [#115]) + +[#24]: https://github.com/rust-lang-nursery/bitflags/pull/24 +[#106]: https://github.com/rust-lang-nursery/bitflags/pull/106 +[#112]: https://github.com/rust-lang-nursery/bitflags/pull/112 +[#115]: https://github.com/rust-lang-nursery/bitflags/pull/115 + +## How to update your code to use associated constants +Assuming the following structure definition: +```rust +bitflags! { + struct Something: u8 { + const FOO = 0b01, + const BAR = 0b10 + } +} +``` +In 0.9 and older you could do: +```rust +let x = FOO.bits | BAR.bits; +``` +Now you must use: +```rust +let x = Something::FOO.bits | Something::BAR.bits; +``` + +# 0.9.1 +- Fix the implementation of `Formatting` traits when other formatting traits were present in scope ([#105]) + +[#105]: https://github.com/rust-lang-nursery/bitflags/pull/105 + +# 0.9.0 +- **[breaking change]** Use struct keyword instead of flags to define bitflag types ([#84]) + +- **[breaking change]** Terminate const items with semicolons instead of commas ([#87]) + +- Implement the `Hex`, `Octal`, and `Binary` formatting traits ([#86]) + +- Printing an empty flag value with the `Debug` trait now prints "(empty)" instead of nothing ([#85]) + +- The `bitflags!` macro can now be used inside of a fn body, to define a type local to that function ([#74]) + +[#74]: https://github.com/rust-lang-nursery/bitflags/pull/74 +[#84]: https://github.com/rust-lang-nursery/bitflags/pull/84 +[#85]: https://github.com/rust-lang-nursery/bitflags/pull/85 +[#86]: https://github.com/rust-lang-nursery/bitflags/pull/86 +[#87]: https://github.com/rust-lang-nursery/bitflags/pull/87 + +# 0.8.2 +- Update feature flag used when building bitflags as a dependency of the Rust toolchain + +# 0.8.1 +- Allow bitflags to be used as a dependency of the Rust toolchain + +# 0.8.0 +- Add support for the experimental `i128` and `u128` integer types ([#57]) +- Add set method: `flags.set(SOME_FLAG, true)` or `flags.set(SOME_FLAG, false)` ([#55]) + This may break code that defines its own set method + +[#55]: https://github.com/rust-lang-nursery/bitflags/pull/55 +[#57]: https://github.com/rust-lang-nursery/bitflags/pull/57 + +# 0.7.1 +*(yanked)* + +# 0.7.0 +- Implement the Extend trait ([#49]) +- Allow definitions inside the `bitflags!` macro to refer to items imported from other modules ([#51]) + +[#49]: https://github.com/rust-lang-nursery/bitflags/pull/49 +[#51]: https://github.com/rust-lang-nursery/bitflags/pull/51 + +# 0.6.0 +- The `no_std` feature was removed as it is now the default +- The `assignment_operators` feature was remove as it is now enabled by default +- Some clippy suggestions have been applied |