1 files changed, 337 insertions, 0 deletions
diff --git a/vendor/miniz_oxide/src/inflate/mod.rs b/vendor/miniz_oxide/src/inflate/mod.rs
new file mode 100644
index 0000000..bb19e37
--- /dev/null
+++ b/vendor/miniz_oxide/src/inflate/mod.rs
@@ -0,0 +1,337 @@
+//! This module contains functionality for decompression.
+
+#[cfg(feature = "with-alloc")]
+use crate::alloc::{boxed::Box, vec, vec::Vec};
+use ::core::usize;
+#[cfg(all(feature = "std", feature = "with-alloc"))]
+use std::error::Error;
+
+pub mod core;
+mod output_buffer;
+pub mod stream;
+use self::core::*;
+
+const TINFL_STATUS_FAILED_CANNOT_MAKE_PROGRESS: i32 = -4;
+const TINFL_STATUS_BAD_PARAM: i32 = -3;
+const TINFL_STATUS_ADLER32_MISMATCH: i32 = -2;
+const TINFL_STATUS_FAILED: i32 = -1;
+const TINFL_STATUS_DONE: i32 = 0;
+const TINFL_STATUS_NEEDS_MORE_INPUT: i32 = 1;
+const TINFL_STATUS_HAS_MORE_OUTPUT: i32 = 2;
+
+/// Return status codes.
+#[repr(i8)]
+#[derive(Debug, Copy, Clone, PartialEq, Eq, Hash)]
+pub enum TINFLStatus {
+    /// More input data was expected, but the caller indicated that there was no more data, so the
+    /// input stream is likely truncated.
+    ///
+    /// This can't happen if you have provided the
+    /// [`TINFL_FLAG_HAS_MORE_INPUT`][core::inflate_flags::TINFL_FLAG_HAS_MORE_INPUT] flag to the
+    /// decompression.  By setting that flag, you indicate more input exists but is not provided,
+    /// and so reaching the end of the input data without finding the end of the compressed stream
+    /// would instead return a [`NeedsMoreInput`][Self::NeedsMoreInput] status.
+    FailedCannotMakeProgress = TINFL_STATUS_FAILED_CANNOT_MAKE_PROGRESS as i8,
+
+    /// The output buffer is an invalid size; consider the `flags` parameter.
+    BadParam = TINFL_STATUS_BAD_PARAM as i8,
+
+    /// The decompression went fine, but the adler32 checksum did not match the one
+    /// provided in the header.
+    Adler32Mismatch = TINFL_STATUS_ADLER32_MISMATCH as i8,
+
+    /// Failed to decompress due to invalid data.
+    Failed = TINFL_STATUS_FAILED as i8,
+
+    /// Finished decompression without issues.
+    ///
+    /// This indicates the end of the compressed stream has been reached.
+    Done = TINFL_STATUS_DONE as i8,
+
+    /// The decompressor needs more input data to continue decompressing.
+    ///
+    /// This occurs when there's no more consumable input, but the end of the stream hasn't been
+    /// reached, and you have supplied the
+    /// [`TINFL_FLAG_HAS_MORE_INPUT`][core::inflate_flags::TINFL_FLAG_HAS_MORE_INPUT] flag to the
+    /// decompressor.  Had you not supplied that flag (which would mean you were asserting that you
+    /// believed all the data was available) you would have gotten a
+    /// [`FailedCannotMakeProcess`][Self::FailedCannotMakeProgress] instead.
+    NeedsMoreInput = TINFL_STATUS_NEEDS_MORE_INPUT as i8,
+
+    /// There is still pending data that didn't fit in the output buffer.
+    HasMoreOutput = TINFL_STATUS_HAS_MORE_OUTPUT as i8,
+}
+
+impl TINFLStatus {
+    pub fn from_i32(value: i32) -> Option<TINFLStatus> {
+        use self::TINFLStatus::*;
+        match value {
+            TINFL_STATUS_FAILED_CANNOT_MAKE_PROGRESS => Some(FailedCannotMakeProgress),
+            TINFL_STATUS_BAD_PARAM => Some(BadParam),
+            TINFL_STATUS_ADLER32_MISMATCH => Some(Adler32Mismatch),
+            TINFL_STATUS_FAILED => Some(Failed),
+            TINFL_STATUS_DONE => Some(Done),
+            TINFL_STATUS_NEEDS_MORE_INPUT => Some(NeedsMoreInput),
+            TINFL_STATUS_HAS_MORE_OUTPUT => Some(HasMoreOutput),
+            _ => None,
+        }
+    }
+}
+
+/// Struct return when decompress_to_vec functions fail.
+#[cfg(feature = "with-alloc")]
+#[derive(Debug)]
+pub struct DecompressError {
+    /// Decompressor status on failure. See [TINFLStatus] for details.
+    pub status: TINFLStatus,
+    /// The currently decompressed data if any.
+    pub output: Vec<u8>,
+}
+
+#[cfg(feature = "with-alloc")]
+impl alloc::fmt::Display for DecompressError {
+    fn fmt(&self, f: &mut ::core::fmt::Formatter<'_>) -> ::core::fmt::Result {
+        f.write_str(match self.status {
+            TINFLStatus::FailedCannotMakeProgress => "Truncated input stream",
+            TINFLStatus::BadParam => "Invalid output buffer size",
+            TINFLStatus::Adler32Mismatch => "Adler32 checksum mismatch",
+            TINFLStatus::Failed => "Invalid input data",
+            TINFLStatus::Done => unreachable!(),
+            TINFLStatus::NeedsMoreInput => "Truncated input stream",
+            TINFLStatus::HasMoreOutput => "Output size exceeded the specified limit",
+        })
+    }
+}
+
+/// Implement Error trait only if std feature is requested as it requires std.
+#[cfg(all(feature = "std", feature = "with-alloc"))]
+impl Error for DecompressError {}
+
+#[cfg(feature = "with-alloc")]
+fn decompress_error(status: TINFLStatus, output: Vec<u8>) -> Result<Vec<u8>, DecompressError> {
+    Err(DecompressError { status, output })
+}
+
+/// Decompress the deflate-encoded data in `input` to a vector.
+///
+/// NOTE: This function will not bound the output, so if the output is large enough it can result in an out of memory error.
+/// It is therefore suggested to not use this for anything other than test programs, use the functions with a specified limit, or
+/// ideally streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead.
+///
+/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] containing the status and so far decompressed data if any on failure.
+#[inline]
+#[cfg(feature = "with-alloc")]
+pub fn decompress_to_vec(input: &[u8]) -> Result<Vec<u8>, DecompressError> {
+    decompress_to_vec_inner(input, 0, usize::max_value())
+}
+
+/// Decompress the deflate-encoded data (with a zlib wrapper) in `input` to a vector.
+///
+/// NOTE: This function will not bound the output, so if the output is large enough it can result in an out of memory error.
+/// It is therefore suggested to not use this for anything other than test programs, use the functions with a specified limit, or
+/// ideally streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead.
+///
+/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] containing the status and so far decompressed data if any on failure.
+#[inline]
+#[cfg(feature = "with-alloc")]
+pub fn decompress_to_vec_zlib(input: &[u8]) -> Result<Vec<u8>, DecompressError> {
+    decompress_to_vec_inner(
+        input,
+        inflate_flags::TINFL_FLAG_PARSE_ZLIB_HEADER,
+        usize::max_value(),
+    )
+}
+
+/// Decompress the deflate-encoded data in `input` to a vector.
+///
+/// The vector is grown to at most `max_size` bytes; if the data does not fit in that size,
+/// the error [struct][DecompressError] will contain the status [`TINFLStatus::HasMoreOutput`] and the data that was decompressed on failure.
+///
+/// As this function tries to decompress everything in one go, it's not ideal for general use outside of tests or where the output size is expected to be small.
+/// It is suggested to use streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead.
+///
+/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] on failure.
+#[inline]
+#[cfg(feature = "with-alloc")]
+pub fn decompress_to_vec_with_limit(
+    input: &[u8],
+    max_size: usize,
+) -> Result<Vec<u8>, DecompressError> {
+    decompress_to_vec_inner(input, 0, max_size)
+}
+
+/// Decompress the deflate-encoded data (with a zlib wrapper) in `input` to a vector.
+/// The vector is grown to at most `max_size` bytes; if the data does not fit in that size,
+/// the error [struct][DecompressError] will contain the status [`TINFLStatus::HasMoreOutput`] and the data that was decompressed on failure.
+///
+/// As this function tries to decompress everything in one go, it's not ideal for general use outside of tests or where the output size is expected to be small.
+/// It is suggested to use streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead.
+///
+/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] on failure.
+#[inline]
+#[cfg(feature = "with-alloc")]
+pub fn decompress_to_vec_zlib_with_limit(
+    input: &[u8],
+    max_size: usize,
+) -> Result<Vec<u8>, DecompressError> {
+    decompress_to_vec_inner(input, inflate_flags::TINFL_FLAG_PARSE_ZLIB_HEADER, max_size)
+}
+
+/// Backend of various to-[`Vec`] decompressions.
+///
+/// Returns [`Vec`] of decompressed data on success and the [error struct][DecompressError] with details on failure.
+#[cfg(feature = "with-alloc")]
+fn decompress_to_vec_inner(
+    input: &[u8],
+    flags: u32,
+    max_output_size: usize,
+) -> Result<Vec<u8>, DecompressError> {
+    let flags = flags | inflate_flags::TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF;
+    let mut ret: Vec<u8> = vec![0; input.len().saturating_mul(2).min(max_output_size)];
+
+    let mut decomp = Box::<DecompressorOxide>::default();
+
+    let mut in_pos = 0;
+    let mut out_pos = 0;
+    loop {
+        // Wrap the whole output slice so we know we have enough of the
+        // decompressed data for matches.
+        let (status, in_consumed, out_consumed) =
+            decompress(&mut decomp, &input[in_pos..], &mut ret, out_pos, flags);
+        in_pos += in_consumed;
+        out_pos += out_consumed;
+
+        match status {
+            TINFLStatus::Done => {
+                ret.truncate(out_pos);
+                return Ok(ret);
+            }
+
+            TINFLStatus::HasMoreOutput => {
+                // if the buffer has already reached the size limit, return an error
+                if ret.len() >= max_output_size {
+                    return decompress_error(TINFLStatus::HasMoreOutput, ret);
+                }
+                // calculate the new length, capped at `max_output_size`
+                let new_len = ret.len().saturating_mul(2).min(max_output_size);
+                ret.resize(new_len, 0);
+            }
+
+            _ => return decompress_error(status, ret),
+        }
+    }
+}
+
+/// Decompress one or more source slices from an iterator into the output slice.
+///
+/// * On success, returns the number of bytes that were written.
+/// * On failure, returns the failure status code.
+///
+/// This will fail if the output buffer is not large enough, but in that case
+/// the output buffer will still contain the partial decompression.
+///
+/// * `out` the output buffer.
+/// * `it` the iterator of input slices.
+/// * `zlib_header` if the first slice out of the iterator is expected to have a
+///   Zlib header. Otherwise the slices are assumed to be the deflate data only.
+/// * `ignore_adler32` if the adler32 checksum should be calculated or not.
+pub fn decompress_slice_iter_to_slice<'out, 'inp>(
+    out: &'out mut [u8],
+    it: impl Iterator<Item = &'inp [u8]>,
+    zlib_header: bool,
+    ignore_adler32: bool,
+) -> Result<usize, TINFLStatus> {
+    use self::core::inflate_flags::*;
+
+    let mut it = it.peekable();
+    let r = &mut DecompressorOxide::new();
+    let mut out_pos = 0;
+    while let Some(in_buf) = it.next() {
+        let has_more = it.peek().is_some();
+        let flags = {
+            let mut f = TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF;
+            if zlib_header {
+                f |= TINFL_FLAG_PARSE_ZLIB_HEADER;
+            }
+            if ignore_adler32 {
+                f |= TINFL_FLAG_IGNORE_ADLER32;
+            }
+            if has_more {
+                f |= TINFL_FLAG_HAS_MORE_INPUT;
+            }
+            f
+        };
+        let (status, _input_read, bytes_written) = decompress(r, in_buf, out, out_pos, flags);
+        out_pos += bytes_written;
+        match status {
+            TINFLStatus::NeedsMoreInput => continue,
+            TINFLStatus::Done => return Ok(out_pos),
+            e => return Err(e),
+        }
+    }
+    // If we ran out of source slices without getting a `Done` from the
+    // decompression we can call it a failure.
+    Err(TINFLStatus::FailedCannotMakeProgress)
+}
+
+#[cfg(test)]
+mod test {
+    use super::{
+        decompress_slice_iter_to_slice, decompress_to_vec_zlib, decompress_to_vec_zlib_with_limit,
+        DecompressError, TINFLStatus,
+    };
+    const ENCODED: [u8; 20] = [
+        120, 156, 243, 72, 205, 201, 201, 215, 81, 168, 202, 201, 76, 82, 4, 0, 27, 101, 4, 19,
+    ];
+
+    #[test]
+    fn decompress_vec() {
+        let res = decompress_to_vec_zlib(&ENCODED[..]).unwrap();
+        assert_eq!(res.as_slice(), &b"Hello, zlib!"[..]);
+    }
+
+    #[test]
+    fn decompress_vec_with_high_limit() {
+        let res = decompress_to_vec_zlib_with_limit(&ENCODED[..], 100_000).unwrap();
+        assert_eq!(res.as_slice(), &b"Hello, zlib!"[..]);
+    }
+
+    #[test]
+    fn fail_to_decompress_with_limit() {
+        let res = decompress_to_vec_zlib_with_limit(&ENCODED[..], 8);
+        match res {
+            Err(DecompressError {
+                status: TINFLStatus::HasMoreOutput,
+                ..
+            }) => (), // expected result
+            _ => panic!("Decompression output size limit was not enforced"),
+        }
+    }
+
+    #[test]
+    fn test_decompress_slice_iter_to_slice() {
+        // one slice
+        let mut out = [0_u8; 12_usize];
+        let r =
+            decompress_slice_iter_to_slice(&mut out, Some(&ENCODED[..]).into_iter(), true, false);
+        assert_eq!(r, Ok(12));
+        assert_eq!(&out[..12], &b"Hello, zlib!"[..]);
+
+        // some chunks at a time
+        for chunk_size in 1..13 {
+            // Note: because of https://github.com/Frommi/miniz_oxide/issues/110 our
+            // out buffer needs to have +1 byte available when the chunk size cuts
+            // the adler32 data off from the last actual data.
+            let mut out = [0_u8; 12_usize + 1];
+            let r =
+                decompress_slice_iter_to_slice(&mut out, ENCODED.chunks(chunk_size), true, false);
+            assert_eq!(r, Ok(12));
+            assert_eq!(&out[..12], &b"Hello, zlib!"[..]);
+        }
+
+        // output buffer too small
+        let mut out = [0_u8; 3_usize];
+        let r = decompress_slice_iter_to_slice(&mut out, ENCODED.chunks(7), true, false);
+        assert!(r.is_err());
+    }
+}