From a990de90fe41456a23e58bd087d2f107d321f3a1 Mon Sep 17 00:00:00 2001 From: Valentin Popov Date: Fri, 19 Jul 2024 16:37:58 +0400 Subject: Deleted vendor folder --- vendor/bitflags/CHANGELOG.md | 442 ------------------------------------------- 1 file changed, 442 deletions(-) delete mode 100644 vendor/bitflags/CHANGELOG.md (limited to 'vendor/bitflags/CHANGELOG.md') diff --git a/vendor/bitflags/CHANGELOG.md b/vendor/bitflags/CHANGELOG.md deleted file mode 100644 index 5081ed5..0000000 --- a/vendor/bitflags/CHANGELOG.md +++ /dev/null @@ -1,442 +0,0 @@ -# 2.4.1 - -## What's Changed -* Allow some new pedantic clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/380 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.4.0...2.4.1 - -# 2.4.0 - -## What's Changed -* Remove html_root_url by @eldruin in https://github.com/bitflags/bitflags/pull/368 -* Support unnamed flags by @KodrAus in https://github.com/bitflags/bitflags/pull/371 -* Update smoke test to verify all Clippy and rustc lints by @MitMaro in https://github.com/bitflags/bitflags/pull/374 -* Specify the behavior of bitflags by @KodrAus in https://github.com/bitflags/bitflags/pull/369 - -## New Contributors -* @eldruin made their first contribution in https://github.com/bitflags/bitflags/pull/368 -* @MitMaro made their first contribution in https://github.com/bitflags/bitflags/pull/374 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.3...2.4.0 - -# 2.3.3 - -## Changes to `-=` - -The `-=` operator was incorrectly changed to truncate bits that didn't correspond to valid flags in `2.3.0`. This has -been fixed up so it once again behaves the same as `-` and `difference`. - -## Changes to `!` - -The `!` operator previously called `Self::from_bits_truncate`, which would truncate any bits that only partially -overlapped with a valid flag. It will now use `bits & Self::all().bits()`, so any bits that overlap any bits -specified by any flag will be respected. This is unlikely to have any practical implications, but enables defining -a flag like `const ALL = !0` as a way to signal that any bit pattern is a known set of flags. - -## Changes to formatting - -Zero-valued flags will never be printed. You'll either get `0x0` for empty flags using debug formatting, or the -set of flags with zero-valued flags omitted for others. - -Composite flags will no longer be redundantly printed if there are extra bits to print at the end that don't correspond -to a valid flag. - -## What's Changed -* Fix up incorrect sub assign behavior and other cleanups by @KodrAus in https://github.com/bitflags/bitflags/pull/366 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.2...2.3.3 - -# 2.3.2 - -## What's Changed -* [doc] [src/lib.rs] delete redundant path prefix by @OccupyMars2025 in https://github.com/bitflags/bitflags/pull/361 - -## New Contributors -* @OccupyMars2025 made their first contribution in https://github.com/bitflags/bitflags/pull/361 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.1...2.3.2 - -# 2.3.1 - -## What's Changed -* Fix Self in flags value expressions by @KodrAus in https://github.com/bitflags/bitflags/pull/355 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.0...2.3.1 - -# 2.3.0 - -## What's Changed -* Support ejecting flags types from the bitflags macro by @KodrAus in https://github.com/bitflags/bitflags/pull/351 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.2.1...2.3.0 - -# 2.2.1 - -## What's Changed -* Refactor attribute filtering to apply per-flag by @KodrAus in https://github.com/bitflags/bitflags/pull/345 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.2.0...2.2.1 - -# 2.2.0 - -## What's Changed -* Create SECURITY.md by @KodrAus in https://github.com/bitflags/bitflags/pull/338 -* add docs to describe the behavior of multi-bit flags by @nicholasbishop in https://github.com/bitflags/bitflags/pull/340 -* Add support for bytemuck by @KodrAus in https://github.com/bitflags/bitflags/pull/336 -* Add a top-level macro for filtering attributes by @KodrAus in https://github.com/bitflags/bitflags/pull/341 - -## New Contributors -* @nicholasbishop made their first contribution in https://github.com/bitflags/bitflags/pull/340 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.1.0...2.2.0 - -# 2.1.0 - -## What's Changed -* Add docs for the internal Field0 and examples of formatting/parsing by @KodrAus in https://github.com/bitflags/bitflags/pull/328 -* Add support for arbitrary by @KodrAus in https://github.com/bitflags/bitflags/pull/324 -* Fix up missing docs for consts within consts by @KodrAus in https://github.com/bitflags/bitflags/pull/330 -* Ignore clippy lint in generated code by @Jake-Shadle in https://github.com/bitflags/bitflags/pull/331 - -## New Contributors -* @Jake-Shadle made their first contribution in https://github.com/bitflags/bitflags/pull/331 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.2...2.1.0 - -# 2.0.2 - -## What's Changed -* Fix up missing isize and usize Bits impls by @KodrAus in https://github.com/bitflags/bitflags/pull/321 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.1...2.0.2 - -# 2.0.1 - -## What's Changed -* Fix up some docs issues by @KodrAus in https://github.com/bitflags/bitflags/pull/309 -* Make empty_flag() const. by @tormeh in https://github.com/bitflags/bitflags/pull/313 -* Fix formatting of multi-bit flags with partial overlap by @KodrAus in https://github.com/bitflags/bitflags/pull/316 - -## New Contributors -* @tormeh made their first contribution in https://github.com/bitflags/bitflags/pull/313 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0...2.0.1 - -# 2.0.0 - -## What's Changed -* Fix a typo and call out MSRV bump by @KodrAus in https://github.com/bitflags/bitflags/pull/259 -* BitFlags trait by @arturoc in https://github.com/bitflags/bitflags/pull/220 -* Add a hidden trait to discourage manual impls of BitFlags by @KodrAus in https://github.com/bitflags/bitflags/pull/261 -* Sanitize `Ok` by @konsumlamm in https://github.com/bitflags/bitflags/pull/266 -* Fix bug in `Debug` implementation by @konsumlamm in https://github.com/bitflags/bitflags/pull/268 -* Fix a typo in the generated documentation by @wackbyte in https://github.com/bitflags/bitflags/pull/271 -* Use SPDX license format by @atouchet in https://github.com/bitflags/bitflags/pull/272 -* serde tests fail in CI by @arturoc in https://github.com/bitflags/bitflags/pull/277 -* Fix beta test output by @KodrAus in https://github.com/bitflags/bitflags/pull/279 -* Add example to the README.md file by @tiaanl in https://github.com/bitflags/bitflags/pull/270 -* Iterator over all the enabled options by @arturoc in https://github.com/bitflags/bitflags/pull/278 -* from_bits_(truncate) fail with composite flags by @arturoc in https://github.com/bitflags/bitflags/pull/276 -* Add more platform coverage to CI by @KodrAus in https://github.com/bitflags/bitflags/pull/280 -* rework the way cfgs are handled by @KodrAus in https://github.com/bitflags/bitflags/pull/281 -* Split generated code into two types by @KodrAus in https://github.com/bitflags/bitflags/pull/282 -* expose bitflags iters using nameable types by @KodrAus in https://github.com/bitflags/bitflags/pull/286 -* Support creating flags from their names by @KodrAus in https://github.com/bitflags/bitflags/pull/287 -* Update README.md by @KodrAus in https://github.com/bitflags/bitflags/pull/288 -* Prepare for 2.0.0-rc.1 release by @KodrAus in https://github.com/bitflags/bitflags/pull/289 -* Add missing "if" to contains doc-comment in traits.rs by @rusty-snake in https://github.com/bitflags/bitflags/pull/291 -* Forbid unsafe_code by @fintelia in https://github.com/bitflags/bitflags/pull/294 -* serde: enable no-std support by @nim65s in https://github.com/bitflags/bitflags/pull/296 -* Add a parser for flags formatted as bar-separated-values by @KodrAus in https://github.com/bitflags/bitflags/pull/297 -* Prepare for 2.0.0-rc.2 release by @KodrAus in https://github.com/bitflags/bitflags/pull/299 -* Use strip_prefix instead of starts_with + slice by @QuinnPainter in https://github.com/bitflags/bitflags/pull/301 -* Fix up some clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/302 -* Prepare for 2.0.0-rc.3 release by @KodrAus in https://github.com/bitflags/bitflags/pull/303 -* feat: Add minimum permissions to rust.yml workflow by @gabibguti in https://github.com/bitflags/bitflags/pull/305 - -## New Contributors -* @wackbyte made their first contribution in https://github.com/bitflags/bitflags/pull/271 -* @atouchet made their first contribution in https://github.com/bitflags/bitflags/pull/272 -* @tiaanl made their first contribution in https://github.com/bitflags/bitflags/pull/270 -* @rusty-snake made their first contribution in https://github.com/bitflags/bitflags/pull/291 -* @fintelia made their first contribution in https://github.com/bitflags/bitflags/pull/294 -* @nim65s made their first contribution in https://github.com/bitflags/bitflags/pull/296 -* @QuinnPainter made their first contribution in https://github.com/bitflags/bitflags/pull/301 -* @gabibguti made their first contribution in https://github.com/bitflags/bitflags/pull/305 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/1.3.2...2.0.0 - -# 2.0.0-rc.3 - -## What's Changed -* Use strip_prefix instead of starts_with + slice by @QuinnPainter in https://github.com/bitflags/bitflags/pull/301 -* Fix up some clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/302 - -## New Contributors -* @QuinnPainter made their first contribution in https://github.com/bitflags/bitflags/pull/301 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0-rc.2...2.0.0-rc.3 - -# 2.0.0-rc.2 - -## Changes to `serde` serialization - -**⚠️ NOTE ⚠️** This release changes the default serialization you'll get if you `#[derive(Serialize, Deserialize)]` -on your generated flags types. It will now use a formatted string for human-readable formats and the underlying bits -type for compact formats. - -To keep the old behavior, see the [`bitflags-serde-legacy`](https://github.com/KodrAus/bitflags-serde-legacy) library. - -## What's Changed - -* Add missing "if" to contains doc-comment in traits.rs by @rusty-snake in https://github.com/bitflags/bitflags/pull/291 -* Forbid unsafe_code by @fintelia in https://github.com/bitflags/bitflags/pull/294 -* serde: enable no-std support by @nim65s in https://github.com/bitflags/bitflags/pull/296 -* Add a parser for flags formatted as bar-separated-values by @KodrAus in https://github.com/bitflags/bitflags/pull/297 - -## New Contributors -* @rusty-snake made their first contribution in https://github.com/bitflags/bitflags/pull/291 -* @fintelia made their first contribution in https://github.com/bitflags/bitflags/pull/294 -* @nim65s made their first contribution in https://github.com/bitflags/bitflags/pull/296 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0-rc.1...2.0.0-rc.2 - -# 2.0.0-rc.1 - -This is a big release including a few years worth of work on a new `BitFlags` trait, iteration, and better macro organization for future extensibility. - -## What's Changed -* Fix a typo and call out MSRV bump by @KodrAus in https://github.com/bitflags/bitflags/pull/259 -* BitFlags trait by @arturoc in https://github.com/bitflags/bitflags/pull/220 -* Add a hidden trait to discourage manual impls of BitFlags by @KodrAus in https://github.com/bitflags/bitflags/pull/261 -* Sanitize `Ok` by @konsumlamm in https://github.com/bitflags/bitflags/pull/266 -* Fix bug in `Debug` implementation by @konsumlamm in https://github.com/bitflags/bitflags/pull/268 -* Fix a typo in the generated documentation by @wackbyte in https://github.com/bitflags/bitflags/pull/271 -* Use SPDX license format by @atouchet in https://github.com/bitflags/bitflags/pull/272 -* serde tests fail in CI by @arturoc in https://github.com/bitflags/bitflags/pull/277 -* Fix beta test output by @KodrAus in https://github.com/bitflags/bitflags/pull/279 -* Add example to the README.md file by @tiaanl in https://github.com/bitflags/bitflags/pull/270 -* Iterator over all the enabled options by @arturoc in https://github.com/bitflags/bitflags/pull/278 -* from_bits_(truncate) fail with composite flags by @arturoc in https://github.com/bitflags/bitflags/pull/276 -* Add more platform coverage to CI by @KodrAus in https://github.com/bitflags/bitflags/pull/280 -* rework the way cfgs are handled by @KodrAus in https://github.com/bitflags/bitflags/pull/281 -* Split generated code into two types by @KodrAus in https://github.com/bitflags/bitflags/pull/282 -* expose bitflags iters using nameable types by @KodrAus in https://github.com/bitflags/bitflags/pull/286 -* Support creating flags from their names by @KodrAus in https://github.com/bitflags/bitflags/pull/287 -* Update README.md by @KodrAus in https://github.com/bitflags/bitflags/pull/288 - -## New Contributors -* @wackbyte made their first contribution in https://github.com/bitflags/bitflags/pull/271 -* @atouchet made their first contribution in https://github.com/bitflags/bitflags/pull/272 -* @tiaanl made their first contribution in https://github.com/bitflags/bitflags/pull/270 - -**Full Changelog**: https://github.com/bitflags/bitflags/compare/1.3.2...2.0.0-rc.1 - -# 1.3.2 - -- Allow `non_snake_case` in generated flags types ([#256]) - -[#256]: https://github.com/bitflags/bitflags/pull/256 - -# 1.3.1 - -- Revert unconditional `#[repr(transparent)]` ([#252]) - -[#252]: https://github.com/bitflags/bitflags/pull/252 - -# 1.3.0 (yanked) - -**This release bumps the Minimum Supported Rust Version to `1.46.0`** - -- Add `#[repr(transparent)]` ([#187]) - -- End `empty` doc comment with full stop ([#202]) - -- Fix typo in crate root docs ([#206]) - -- Document from_bits_unchecked unsafety ([#207]) - -- Let `is_all` ignore extra bits ([#211]) - -- Allows empty flag definition ([#225]) - -- Making crate accessible from std ([#227]) - -- Make `from_bits` a const fn ([#229]) - -- Allow multiple bitflags structs in one macro invocation ([#235]) - -- Add named functions to perform set operations ([#244]) - -- Fix typos in method docs ([#245]) - -- Modernization of the `bitflags` macro to take advantage of newer features and 2018 idioms ([#246]) - -- Fix regression (in an unreleased feature) and simplify tests ([#247]) - -- Use `Self` and fix bug when overriding `stringify!` ([#249]) - -[#187]: https://github.com/bitflags/bitflags/pull/187 -[#202]: https://github.com/bitflags/bitflags/pull/202 -[#206]: https://github.com/bitflags/bitflags/pull/206 -[#207]: https://github.com/bitflags/bitflags/pull/207 -[#211]: https://github.com/bitflags/bitflags/pull/211 -[#225]: https://github.com/bitflags/bitflags/pull/225 -[#227]: https://github.com/bitflags/bitflags/pull/227 -[#229]: https://github.com/bitflags/bitflags/pull/229 -[#235]: https://github.com/bitflags/bitflags/pull/235 -[#244]: https://github.com/bitflags/bitflags/pull/244 -[#245]: https://github.com/bitflags/bitflags/pull/245 -[#246]: https://github.com/bitflags/bitflags/pull/246 -[#247]: https://github.com/bitflags/bitflags/pull/247 -[#249]: https://github.com/bitflags/bitflags/pull/249 - -# 1.2.1 - -- Remove extraneous `#[inline]` attributes ([#194]) - -[#194]: https://github.com/bitflags/bitflags/pull/194 - -# 1.2.0 - -- Fix typo: {Lower, Upper}Exp - {Lower, Upper}Hex ([#183]) - -- Add support for "unknown" bits ([#188]) - -[#183]: https://github.com/rust-lang-nursery/bitflags/pull/183 -[#188]: https://github.com/rust-lang-nursery/bitflags/pull/188 - -# 1.1.0 - -This is a re-release of `1.0.5`, which was yanked due to a bug in the RLS. - -# 1.0.5 - -- Use compiletest_rs flags supported by stable toolchain ([#171]) - -- Put the user provided attributes first ([#173]) - -- Make bitflags methods `const` on newer compilers ([#175]) - -[#171]: https://github.com/rust-lang-nursery/bitflags/pull/171 -[#173]: https://github.com/rust-lang-nursery/bitflags/pull/173 -[#175]: https://github.com/rust-lang-nursery/bitflags/pull/175 - -# 1.0.4 - -- Support Rust 2018 style macro imports ([#165]) - - ```rust - use bitflags::bitflags; - ``` - -[#165]: https://github.com/rust-lang-nursery/bitflags/pull/165 - -# 1.0.3 - -- Improve zero value flag handling and documentation ([#157]) - -[#157]: https://github.com/rust-lang-nursery/bitflags/pull/157 - -# 1.0.2 - -- 30% improvement in compile time of bitflags crate ([#156]) - -- Documentation improvements ([#153]) - -- Implementation cleanup ([#149]) - -[#156]: https://github.com/rust-lang-nursery/bitflags/pull/156 -[#153]: https://github.com/rust-lang-nursery/bitflags/pull/153 -[#149]: https://github.com/rust-lang-nursery/bitflags/pull/149 - -# 1.0.1 -- Add support for `pub(restricted)` specifier on the bitflags struct ([#135]) -- Optimize performance of `all()` when called from a separate crate ([#136]) - -[#135]: https://github.com/rust-lang-nursery/bitflags/pull/135 -[#136]: https://github.com/rust-lang-nursery/bitflags/pull/136 - -# 1.0.0 -- **[breaking change]** Macro now generates [associated constants](https://doc.rust-lang.org/reference/items.html#associated-constants) ([#24]) - -- **[breaking change]** Minimum supported version is Rust **1.20**, due to usage of associated constants - -- After being broken in 0.9, the `#[deprecated]` attribute is now supported again ([#112]) - -- Other improvements to unit tests and documentation ([#106] and [#115]) - -[#24]: https://github.com/rust-lang-nursery/bitflags/pull/24 -[#106]: https://github.com/rust-lang-nursery/bitflags/pull/106 -[#112]: https://github.com/rust-lang-nursery/bitflags/pull/112 -[#115]: https://github.com/rust-lang-nursery/bitflags/pull/115 - -## How to update your code to use associated constants -Assuming the following structure definition: -```rust -bitflags! { - struct Something: u8 { - const FOO = 0b01, - const BAR = 0b10 - } -} -``` -In 0.9 and older you could do: -```rust -let x = FOO.bits | BAR.bits; -``` -Now you must use: -```rust -let x = Something::FOO.bits | Something::BAR.bits; -``` - -# 0.9.1 -- Fix the implementation of `Formatting` traits when other formatting traits were present in scope ([#105]) - -[#105]: https://github.com/rust-lang-nursery/bitflags/pull/105 - -# 0.9.0 -- **[breaking change]** Use struct keyword instead of flags to define bitflag types ([#84]) - -- **[breaking change]** Terminate const items with semicolons instead of commas ([#87]) - -- Implement the `Hex`, `Octal`, and `Binary` formatting traits ([#86]) - -- Printing an empty flag value with the `Debug` trait now prints "(empty)" instead of nothing ([#85]) - -- The `bitflags!` macro can now be used inside of a fn body, to define a type local to that function ([#74]) - -[#74]: https://github.com/rust-lang-nursery/bitflags/pull/74 -[#84]: https://github.com/rust-lang-nursery/bitflags/pull/84 -[#85]: https://github.com/rust-lang-nursery/bitflags/pull/85 -[#86]: https://github.com/rust-lang-nursery/bitflags/pull/86 -[#87]: https://github.com/rust-lang-nursery/bitflags/pull/87 - -# 0.8.2 -- Update feature flag used when building bitflags as a dependency of the Rust toolchain - -# 0.8.1 -- Allow bitflags to be used as a dependency of the Rust toolchain - -# 0.8.0 -- Add support for the experimental `i128` and `u128` integer types ([#57]) -- Add set method: `flags.set(SOME_FLAG, true)` or `flags.set(SOME_FLAG, false)` ([#55]) - This may break code that defines its own set method - -[#55]: https://github.com/rust-lang-nursery/bitflags/pull/55 -[#57]: https://github.com/rust-lang-nursery/bitflags/pull/57 - -# 0.7.1 -*(yanked)* - -# 0.7.0 -- Implement the Extend trait ([#49]) -- Allow definitions inside the `bitflags!` macro to refer to items imported from other modules ([#51]) - -[#49]: https://github.com/rust-lang-nursery/bitflags/pull/49 -[#51]: https://github.com/rust-lang-nursery/bitflags/pull/51 - -# 0.6.0 -- The `no_std` feature was removed as it is now the default -- The `assignment_operators` feature was remove as it is now enabled by default -- Some clippy suggestions have been applied -- cgit v1.2.3