From a990de90fe41456a23e58bd087d2f107d321f3a1 Mon Sep 17 00:00:00 2001 From: Valentin Popov Date: Fri, 19 Jul 2024 16:37:58 +0400 Subject: Deleted vendor folder --- vendor/half/src/lib.rs | 233 ------------------------------------------------- 1 file changed, 233 deletions(-) delete mode 100644 vendor/half/src/lib.rs (limited to 'vendor/half/src/lib.rs') diff --git a/vendor/half/src/lib.rs b/vendor/half/src/lib.rs deleted file mode 100644 index f821945..0000000 --- a/vendor/half/src/lib.rs +++ /dev/null @@ -1,233 +0,0 @@ -//! A crate that provides support for half-precision 16-bit floating point types. -//! -//! This crate provides the [`f16`] type, which is an implementation of the IEEE 754-2008 standard -//! [`binary16`] a.k.a `half` floating point type. This 16-bit floating point type is intended for -//! efficient storage where the full range and precision of a larger floating point value is not -//! required. This is especially useful for image storage formats. -//! -//! This crate also provides a [`bf16`] type, an alternative 16-bit floating point format. The -//! [`bfloat16`] format is a truncated IEEE 754 standard `binary32` float that preserves the -//! exponent to allow the same range as [`f32`] but with only 8 bits of precision (instead of 11 -//! bits for [`f16`]). See the [`bf16`] type for details. -//! -//! Because [`f16`] and [`bf16`] are primarily for efficient storage, floating point operations such -//! as addition, multiplication, etc. are not implemented by hardware. While this crate does provide -//! the appropriate trait implementations for basic operations, they each convert the value to -//! [`f32`] before performing the operation and then back afterward. When performing complex -//! arithmetic, manually convert to and from [`f32`] before and after to reduce repeated conversions -//! for each operation. -//! -//! This crate also provides a [`slice`][mod@slice] module for zero-copy in-place conversions of -//! [`u16`] slices to both [`f16`] and [`bf16`], as well as efficient vectorized conversions of -//! larger buffers of floating point values to and from these half formats. -//! -//! The crate uses `#[no_std]` by default, so can be used in embedded environments without using the -//! Rust [`std`] library. A `std` feature to enable support for the standard library is available, -//! see the [Cargo Features](#cargo-features) section below. -//! -//! A [`prelude`] module is provided for easy importing of available utility traits. -//! -//! # Serialization -//! -//! When the `serde` feature is enabled, [`f16`] and [`bf16`] will be serialized as a newtype of -//! [`u16`] by default. In binary formats this is ideal, as it will generally use just two bytes for -//! storage. For string formats like JSON, however, this isn't as useful, and due to design -//! limitations of serde, it's not possible for the default `Serialize` implementation to support -//! different serialization for different formats. -//! -//! Instead, it's up to the containter type of the floats to control how it is serialized. This can -//! easily be controlled when using the derive macros using `#[serde(serialize_with="")]` -//! attributes. For both [`f16`] and [`bf16`] a `serialize_as_f32` and `serialize_as_string` are -//! provided for use with this attribute. -//! -//! Deserialization of both float types supports deserializing from the default serialization, -//! strings, and `f32`/`f64` values, so no additional work is required. -//! -//! # Cargo Features -//! -//! This crate supports a number of optional cargo features. None of these features are enabled by -//! default, even `std`. -//! -//! - **`use-intrinsics`** -- Use [`core::arch`] hardware intrinsics for `f16` and `bf16` conversions -//! if available on the compiler target. This feature currently only works on nightly Rust -//! until the corresponding intrinsics are stabilized. -//! -//! When this feature is enabled and the hardware supports it, the functions and traits in the -//! [`slice`][mod@slice] module will use vectorized SIMD intructions for increased efficiency. -//! -//! By default, without this feature, conversions are done only in software, which will also be -//! the fallback if the target does not have hardware support. Note that without the `std` -//! feature enabled, no runtime CPU feature detection is used, so the hardware support is only -//! compiled if the compiler target supports the CPU feature. -//! -//! - **`alloc`** -- Enable use of the [`alloc`] crate when not using the `std` library. -//! -//! Among other functions, this enables the [`vec`] module, which contains zero-copy -//! conversions for the [`Vec`] type. This allows fast conversion between raw `Vec` bits and -//! `Vec` or `Vec` arrays, and vice versa. -//! -//! - **`std`** -- Enable features that depend on the Rust [`std`] library. This also enables the -//! `alloc` feature automatically. -//! -//! Enabling the `std` feature also enables runtime CPU feature detection when the -//! `use-intrsincis` feature is also enabled. Without this feature detection, intrinsics are only -//! used when compiler target supports the target feature. -//! -//! - **`serde`** -- Adds support for the [`serde`] crate by implementing [`Serialize`] and -//! [`Deserialize`] traits for both [`f16`] and [`bf16`]. -//! -//! - **`num-traits`** -- Adds support for the [`num-traits`] crate by implementing [`ToPrimitive`], -//! [`FromPrimitive`], [`AsPrimitive`], [`Num`], [`Float`], [`FloatCore`], and [`Bounded`] traits -//! for both [`f16`] and [`bf16`]. -//! -//! - **`bytemuck`** -- Adds support for the [`bytemuck`] crate by implementing [`Zeroable`] and -//! [`Pod`] traits for both [`f16`] and [`bf16`]. -//! -//! - **`zerocopy`** -- Adds support for the [`zerocopy`] crate by implementing [`AsBytes`] and -//! [`FromBytes`] traits for both [`f16`] and [`bf16`]. -//! -//! [`alloc`]: https://doc.rust-lang.org/alloc/ -//! [`std`]: https://doc.rust-lang.org/std/ -//! [`binary16`]: https://en.wikipedia.org/wiki/Half-precision_floating-point_format -//! [`bfloat16`]: https://en.wikipedia.org/wiki/Bfloat16_floating-point_format -//! [`serde`]: https://crates.io/crates/serde -//! [`bytemuck`]: https://crates.io/crates/bytemuck -//! [`num-traits`]: https://crates.io/crates/num-traits -//! [`zerocopy`]: https://crates.io/crates/zerocopy -#![cfg_attr( - feature = "alloc", - doc = " -[`vec`]: mod@vec" -)] -#![cfg_attr( - not(feature = "alloc"), - doc = " -[`vec`]: # -[`Vec`]: https://docs.rust-lang.org/stable/alloc/vec/struct.Vec.html" -)] -#![cfg_attr( - feature = "serde", - doc = " -[`Serialize`]: serde::Serialize -[`Deserialize`]: serde::Deserialize" -)] -#![cfg_attr( - not(feature = "serde"), - doc = " -[`Serialize`]: https://docs.rs/serde/*/serde/trait.Serialize.html -[`Deserialize`]: https://docs.rs/serde/*/serde/trait.Deserialize.html" -)] -#![cfg_attr( - feature = "num-traits", - doc = " -[`ToPrimitive`]: ::num_traits::ToPrimitive -[`FromPrimitive`]: ::num_traits::FromPrimitive -[`AsPrimitive`]: ::num_traits::AsPrimitive -[`Num`]: ::num_traits::Num -[`Float`]: ::num_traits::Float -[`FloatCore`]: ::num_traits::float::FloatCore -[`Bounded`]: ::num_traits::Bounded" -)] -#![cfg_attr( - not(feature = "num-traits"), - doc = " -[`ToPrimitive`]: https://docs.rs/num-traits/*/num_traits/cast/trait.ToPrimitive.html -[`FromPrimitive`]: https://docs.rs/num-traits/*/num_traits/cast/trait.FromPrimitive.html -[`AsPrimitive`]: https://docs.rs/num-traits/*/num_traits/cast/trait.AsPrimitive.html -[`Num`]: https://docs.rs/num-traits/*/num_traits/trait.Num.html -[`Float`]: https://docs.rs/num-traits/*/num_traits/float/trait.Float.html -[`FloatCore`]: https://docs.rs/num-traits/*/num_traits/float/trait.FloatCore.html -[`Bounded`]: https://docs.rs/num-traits/*/num_traits/bounds/trait.Bounded.html" -)] -#![cfg_attr( - feature = "bytemuck", - doc = " -[`Zeroable`]: bytemuck::Zeroable -[`Pod`]: bytemuck::Pod" -)] -#![cfg_attr( - not(feature = "bytemuck"), - doc = " -[`Zeroable`]: https://docs.rs/bytemuck/*/bytemuck/trait.Zeroable.html -[`Pod`]: https://docs.rs/bytemuck/*bytemuck/trait.Pod.html" -)] -#![cfg_attr( - feature = "zerocopy", - doc = " -[`AsBytes`]: zerocopy::AsBytes -[`FromBytes`]: zerocopy::FromBytes" -)] -#![cfg_attr( - not(feature = "zerocopy"), - doc = " -[`AsBytes`]: https://docs.rs/zerocopy/*/zerocopy/trait.AsBytes.html -[`FromBytes`]: https://docs.rs/zerocopy/*/zerocopy/trait.FromBytes.html" -)] -#![warn( - missing_docs, - missing_copy_implementations, - trivial_numeric_casts, - future_incompatible -)] -#![cfg_attr(not(target_arch = "spirv"), warn(missing_debug_implementations))] -#![allow(clippy::verbose_bit_mask, clippy::cast_lossless)] -#![cfg_attr(not(feature = "std"), no_std)] -#![cfg_attr( - all( - feature = "use-intrinsics", - any(target_arch = "x86", target_arch = "x86_64") - ), - feature(stdsimd, f16c_target_feature) -)] -#![doc(html_root_url = "https://docs.rs/half/2.2.1")] -#![doc(test(attr(deny(warnings), allow(unused))))] -#![cfg_attr(docsrs, feature(doc_cfg))] - -#[cfg(feature = "alloc")] -extern crate alloc; - -mod bfloat; -mod binary16; -mod leading_zeros; -#[cfg(feature = "num-traits")] -mod num_traits; - -#[cfg(not(target_arch = "spirv"))] -pub mod slice; -#[cfg(feature = "alloc")] -#[cfg_attr(docsrs, doc(cfg(feature = "alloc")))] -pub mod vec; - -pub use bfloat::bf16; -pub use binary16::f16; - -/// A collection of the most used items and traits in this crate for easy importing. -/// -/// # Examples -/// -/// ```rust -/// use half::prelude::*; -/// ``` -pub mod prelude { - #[doc(no_inline)] - pub use crate::{bf16, f16}; - - #[cfg(not(target_arch = "spirv"))] - #[doc(no_inline)] - pub use crate::slice::{HalfBitsSliceExt, HalfFloatSliceExt}; - - #[cfg(feature = "alloc")] - #[doc(no_inline)] - #[cfg_attr(docsrs, doc(cfg(feature = "alloc")))] - pub use crate::vec::{HalfBitsVecExt, HalfFloatVecExt}; -} - -// Keep this module private to crate -mod private { - use crate::{bf16, f16}; - - pub trait SealedHalf {} - - impl SealedHalf for f16 {} - impl SealedHalf for bf16 {} -} -- cgit v1.2.3