From 1b6a04ca5504955c571d1c97504fb45ea0befee4 Mon Sep 17 00:00:00 2001
From: Valentin Popov <valentin@popov.link>
Date: Mon, 8 Jan 2024 01:21:28 +0400
Subject: Initial vendor packages

Signed-off-by: Valentin Popov <valentin@popov.link>
---
 vendor/miniz_oxide/src/deflate/stream.rs | 121 +++++++++++++++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 vendor/miniz_oxide/src/deflate/stream.rs

(limited to 'vendor/miniz_oxide/src/deflate/stream.rs')

diff --git a/vendor/miniz_oxide/src/deflate/stream.rs b/vendor/miniz_oxide/src/deflate/stream.rs
new file mode 100644
index 0000000..39aa82d
--- /dev/null
+++ b/vendor/miniz_oxide/src/deflate/stream.rs
@@ -0,0 +1,121 @@
+//! Extra streaming compression functionality.
+//!
+//! As of now this is mainly intended for use to build a higher-level wrapper.
+//!
+//! There is no DeflateState as the needed state is contained in the compressor struct itself.
+
+use crate::deflate::core::{compress, CompressorOxide, TDEFLFlush, TDEFLStatus};
+use crate::{MZError, MZFlush, MZStatus, StreamResult};
+
+/// Try to compress from input to output with the given [`CompressorOxide`].
+///
+/// # Errors
+///
+/// Returns [`MZError::Buf`] If the size of the `output` slice is empty or no progress was made due
+/// to lack of expected input data, or if called without [`MZFlush::Finish`] after the compression
+/// was already finished.
+///
+/// Returns [`MZError::Param`] if the compressor parameters are set wrong.
+///
+/// Returns [`MZError::Stream`] when lower-level decompressor returns a
+/// [`TDEFLStatus::PutBufFailed`]; may not actually be possible.
+pub fn deflate(
+    compressor: &mut CompressorOxide,
+    input: &[u8],
+    output: &mut [u8],
+    flush: MZFlush,
+) -> StreamResult {
+    if output.is_empty() {
+        return StreamResult::error(MZError::Buf);
+    }
+
+    if compressor.prev_return_status() == TDEFLStatus::Done {
+        return if flush == MZFlush::Finish {
+            StreamResult {
+                bytes_written: 0,
+                bytes_consumed: 0,
+                status: Ok(MZStatus::StreamEnd),
+            }
+        } else {
+            StreamResult::error(MZError::Buf)
+        };
+    }
+
+    let mut bytes_written = 0;
+    let mut bytes_consumed = 0;
+
+    let mut next_in = input;
+    let mut next_out = output;
+
+    let status = loop {
+        let in_bytes;
+        let out_bytes;
+        let defl_status = {
+            let res = compress(compressor, next_in, next_out, TDEFLFlush::from(flush));
+            in_bytes = res.1;
+            out_bytes = res.2;
+            res.0
+        };
+
+        next_in = &next_in[in_bytes..];
+        next_out = &mut next_out[out_bytes..];
+        bytes_consumed += in_bytes;
+        bytes_written += out_bytes;
+
+        // Check if we are done, or compression failed.
+        match defl_status {
+            TDEFLStatus::BadParam => break Err(MZError::Param),
+            // Don't think this can happen as we're not using a custom callback.
+            TDEFLStatus::PutBufFailed => break Err(MZError::Stream),
+            TDEFLStatus::Done => break Ok(MZStatus::StreamEnd),
+            _ => (),
+        };
+
+        // All the output space was used, so wait for more.
+        if next_out.is_empty() {
+            break Ok(MZStatus::Ok);
+        }
+
+        if next_in.is_empty() && (flush != MZFlush::Finish) {
+            let total_changed = bytes_written > 0 || bytes_consumed > 0;
+
+            break if (flush != MZFlush::None) || total_changed {
+                // We wrote or consumed something, and/or did a flush (sync/partial etc.).
+                Ok(MZStatus::Ok)
+            } else {
+                // No more input data, not flushing, and nothing was consumed or written,
+                // so couldn't make any progress.
+                Err(MZError::Buf)
+            };
+        }
+    };
+    StreamResult {
+        bytes_consumed,
+        bytes_written,
+        status,
+    }
+}
+
+#[cfg(test)]
+mod test {
+    use super::deflate;
+    use crate::deflate::CompressorOxide;
+    use crate::inflate::decompress_to_vec_zlib;
+    use crate::{MZFlush, MZStatus};
+    use alloc::boxed::Box;
+    use alloc::vec;
+
+    #[test]
+    fn test_state() {
+        let data = b"Hello zlib!";
+        let mut compressed = vec![0; 50];
+        let mut compressor = Box::<CompressorOxide>::default();
+        let res = deflate(&mut compressor, data, &mut compressed, MZFlush::Finish);
+        let status = res.status.expect("Failed to compress!");
+        let decomp =
+            decompress_to_vec_zlib(&compressed).expect("Failed to decompress compressed data");
+        assert_eq!(status, MZStatus::StreamEnd);
+        assert_eq!(decomp[..], data[..]);
+        assert_eq!(res.bytes_consumed, data.len());
+    }
+}
-- 
cgit v1.2.3