From 1b6a04ca5504955c571d1c97504fb45ea0befee4 Mon Sep 17 00:00:00 2001 From: Valentin Popov Date: Mon, 8 Jan 2024 01:21:28 +0400 Subject: Initial vendor packages Signed-off-by: Valentin Popov --- vendor/miniz_oxide/src/inflate/mod.rs | 337 ++++++++++++++++++++++++++++++++++ 1 file changed, 337 insertions(+) create mode 100644 vendor/miniz_oxide/src/inflate/mod.rs (limited to 'vendor/miniz_oxide/src/inflate/mod.rs') diff --git a/vendor/miniz_oxide/src/inflate/mod.rs b/vendor/miniz_oxide/src/inflate/mod.rs new file mode 100644 index 0000000..bb19e37 --- /dev/null +++ b/vendor/miniz_oxide/src/inflate/mod.rs @@ -0,0 +1,337 @@ +//! This module contains functionality for decompression. + +#[cfg(feature = "with-alloc")] +use crate::alloc::{boxed::Box, vec, vec::Vec}; +use ::core::usize; +#[cfg(all(feature = "std", feature = "with-alloc"))] +use std::error::Error; + +pub mod core; +mod output_buffer; +pub mod stream; +use self::core::*; + +const TINFL_STATUS_FAILED_CANNOT_MAKE_PROGRESS: i32 = -4; +const TINFL_STATUS_BAD_PARAM: i32 = -3; +const TINFL_STATUS_ADLER32_MISMATCH: i32 = -2; +const TINFL_STATUS_FAILED: i32 = -1; +const TINFL_STATUS_DONE: i32 = 0; +const TINFL_STATUS_NEEDS_MORE_INPUT: i32 = 1; +const TINFL_STATUS_HAS_MORE_OUTPUT: i32 = 2; + +/// Return status codes. +#[repr(i8)] +#[derive(Debug, Copy, Clone, PartialEq, Eq, Hash)] +pub enum TINFLStatus { + /// More input data was expected, but the caller indicated that there was no more data, so the + /// input stream is likely truncated. + /// + /// This can't happen if you have provided the + /// [`TINFL_FLAG_HAS_MORE_INPUT`][core::inflate_flags::TINFL_FLAG_HAS_MORE_INPUT] flag to the + /// decompression. By setting that flag, you indicate more input exists but is not provided, + /// and so reaching the end of the input data without finding the end of the compressed stream + /// would instead return a [`NeedsMoreInput`][Self::NeedsMoreInput] status. + FailedCannotMakeProgress = TINFL_STATUS_FAILED_CANNOT_MAKE_PROGRESS as i8, + + /// The output buffer is an invalid size; consider the `flags` parameter. + BadParam = TINFL_STATUS_BAD_PARAM as i8, + + /// The decompression went fine, but the adler32 checksum did not match the one + /// provided in the header. + Adler32Mismatch = TINFL_STATUS_ADLER32_MISMATCH as i8, + + /// Failed to decompress due to invalid data. + Failed = TINFL_STATUS_FAILED as i8, + + /// Finished decompression without issues. + /// + /// This indicates the end of the compressed stream has been reached. + Done = TINFL_STATUS_DONE as i8, + + /// The decompressor needs more input data to continue decompressing. + /// + /// This occurs when there's no more consumable input, but the end of the stream hasn't been + /// reached, and you have supplied the + /// [`TINFL_FLAG_HAS_MORE_INPUT`][core::inflate_flags::TINFL_FLAG_HAS_MORE_INPUT] flag to the + /// decompressor. Had you not supplied that flag (which would mean you were asserting that you + /// believed all the data was available) you would have gotten a + /// [`FailedCannotMakeProcess`][Self::FailedCannotMakeProgress] instead. + NeedsMoreInput = TINFL_STATUS_NEEDS_MORE_INPUT as i8, + + /// There is still pending data that didn't fit in the output buffer. + HasMoreOutput = TINFL_STATUS_HAS_MORE_OUTPUT as i8, +} + +impl TINFLStatus { + pub fn from_i32(value: i32) -> Option { + use self::TINFLStatus::*; + match value { + TINFL_STATUS_FAILED_CANNOT_MAKE_PROGRESS => Some(FailedCannotMakeProgress), + TINFL_STATUS_BAD_PARAM => Some(BadParam), + TINFL_STATUS_ADLER32_MISMATCH => Some(Adler32Mismatch), + TINFL_STATUS_FAILED => Some(Failed), + TINFL_STATUS_DONE => Some(Done), + TINFL_STATUS_NEEDS_MORE_INPUT => Some(NeedsMoreInput), + TINFL_STATUS_HAS_MORE_OUTPUT => Some(HasMoreOutput), + _ => None, + } + } +} + +/// Struct return when decompress_to_vec functions fail. +#[cfg(feature = "with-alloc")] +#[derive(Debug)] +pub struct DecompressError { + /// Decompressor status on failure. See [TINFLStatus] for details. + pub status: TINFLStatus, + /// The currently decompressed data if any. + pub output: Vec, +} + +#[cfg(feature = "with-alloc")] +impl alloc::fmt::Display for DecompressError { + fn fmt(&self, f: &mut ::core::fmt::Formatter<'_>) -> ::core::fmt::Result { + f.write_str(match self.status { + TINFLStatus::FailedCannotMakeProgress => "Truncated input stream", + TINFLStatus::BadParam => "Invalid output buffer size", + TINFLStatus::Adler32Mismatch => "Adler32 checksum mismatch", + TINFLStatus::Failed => "Invalid input data", + TINFLStatus::Done => unreachable!(), + TINFLStatus::NeedsMoreInput => "Truncated input stream", + TINFLStatus::HasMoreOutput => "Output size exceeded the specified limit", + }) + } +} + +/// Implement Error trait only if std feature is requested as it requires std. +#[cfg(all(feature = "std", feature = "with-alloc"))] +impl Error for DecompressError {} + +#[cfg(feature = "with-alloc")] +fn decompress_error(status: TINFLStatus, output: Vec) -> Result, DecompressError> { + Err(DecompressError { status, output }) +} + +/// Decompress the deflate-encoded data in `input` to a vector. +/// +/// NOTE: This function will not bound the output, so if the output is large enough it can result in an out of memory error. +/// It is therefore suggested to not use this for anything other than test programs, use the functions with a specified limit, or +/// ideally streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead. +/// +/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] containing the status and so far decompressed data if any on failure. +#[inline] +#[cfg(feature = "with-alloc")] +pub fn decompress_to_vec(input: &[u8]) -> Result, DecompressError> { + decompress_to_vec_inner(input, 0, usize::max_value()) +} + +/// Decompress the deflate-encoded data (with a zlib wrapper) in `input` to a vector. +/// +/// NOTE: This function will not bound the output, so if the output is large enough it can result in an out of memory error. +/// It is therefore suggested to not use this for anything other than test programs, use the functions with a specified limit, or +/// ideally streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead. +/// +/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] containing the status and so far decompressed data if any on failure. +#[inline] +#[cfg(feature = "with-alloc")] +pub fn decompress_to_vec_zlib(input: &[u8]) -> Result, DecompressError> { + decompress_to_vec_inner( + input, + inflate_flags::TINFL_FLAG_PARSE_ZLIB_HEADER, + usize::max_value(), + ) +} + +/// Decompress the deflate-encoded data in `input` to a vector. +/// +/// The vector is grown to at most `max_size` bytes; if the data does not fit in that size, +/// the error [struct][DecompressError] will contain the status [`TINFLStatus::HasMoreOutput`] and the data that was decompressed on failure. +/// +/// As this function tries to decompress everything in one go, it's not ideal for general use outside of tests or where the output size is expected to be small. +/// It is suggested to use streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead. +/// +/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] on failure. +#[inline] +#[cfg(feature = "with-alloc")] +pub fn decompress_to_vec_with_limit( + input: &[u8], + max_size: usize, +) -> Result, DecompressError> { + decompress_to_vec_inner(input, 0, max_size) +} + +/// Decompress the deflate-encoded data (with a zlib wrapper) in `input` to a vector. +/// The vector is grown to at most `max_size` bytes; if the data does not fit in that size, +/// the error [struct][DecompressError] will contain the status [`TINFLStatus::HasMoreOutput`] and the data that was decompressed on failure. +/// +/// As this function tries to decompress everything in one go, it's not ideal for general use outside of tests or where the output size is expected to be small. +/// It is suggested to use streaming decompression via the [flate2](https://github.com/alexcrichton/flate2-rs) library instead. +/// +/// Returns a [`Result`] containing the [`Vec`] of decompressed data on success, and a [struct][DecompressError] on failure. +#[inline] +#[cfg(feature = "with-alloc")] +pub fn decompress_to_vec_zlib_with_limit( + input: &[u8], + max_size: usize, +) -> Result, DecompressError> { + decompress_to_vec_inner(input, inflate_flags::TINFL_FLAG_PARSE_ZLIB_HEADER, max_size) +} + +/// Backend of various to-[`Vec`] decompressions. +/// +/// Returns [`Vec`] of decompressed data on success and the [error struct][DecompressError] with details on failure. +#[cfg(feature = "with-alloc")] +fn decompress_to_vec_inner( + input: &[u8], + flags: u32, + max_output_size: usize, +) -> Result, DecompressError> { + let flags = flags | inflate_flags::TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF; + let mut ret: Vec = vec![0; input.len().saturating_mul(2).min(max_output_size)]; + + let mut decomp = Box::::default(); + + let mut in_pos = 0; + let mut out_pos = 0; + loop { + // Wrap the whole output slice so we know we have enough of the + // decompressed data for matches. + let (status, in_consumed, out_consumed) = + decompress(&mut decomp, &input[in_pos..], &mut ret, out_pos, flags); + in_pos += in_consumed; + out_pos += out_consumed; + + match status { + TINFLStatus::Done => { + ret.truncate(out_pos); + return Ok(ret); + } + + TINFLStatus::HasMoreOutput => { + // if the buffer has already reached the size limit, return an error + if ret.len() >= max_output_size { + return decompress_error(TINFLStatus::HasMoreOutput, ret); + } + // calculate the new length, capped at `max_output_size` + let new_len = ret.len().saturating_mul(2).min(max_output_size); + ret.resize(new_len, 0); + } + + _ => return decompress_error(status, ret), + } + } +} + +/// Decompress one or more source slices from an iterator into the output slice. +/// +/// * On success, returns the number of bytes that were written. +/// * On failure, returns the failure status code. +/// +/// This will fail if the output buffer is not large enough, but in that case +/// the output buffer will still contain the partial decompression. +/// +/// * `out` the output buffer. +/// * `it` the iterator of input slices. +/// * `zlib_header` if the first slice out of the iterator is expected to have a +/// Zlib header. Otherwise the slices are assumed to be the deflate data only. +/// * `ignore_adler32` if the adler32 checksum should be calculated or not. +pub fn decompress_slice_iter_to_slice<'out, 'inp>( + out: &'out mut [u8], + it: impl Iterator, + zlib_header: bool, + ignore_adler32: bool, +) -> Result { + use self::core::inflate_flags::*; + + let mut it = it.peekable(); + let r = &mut DecompressorOxide::new(); + let mut out_pos = 0; + while let Some(in_buf) = it.next() { + let has_more = it.peek().is_some(); + let flags = { + let mut f = TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF; + if zlib_header { + f |= TINFL_FLAG_PARSE_ZLIB_HEADER; + } + if ignore_adler32 { + f |= TINFL_FLAG_IGNORE_ADLER32; + } + if has_more { + f |= TINFL_FLAG_HAS_MORE_INPUT; + } + f + }; + let (status, _input_read, bytes_written) = decompress(r, in_buf, out, out_pos, flags); + out_pos += bytes_written; + match status { + TINFLStatus::NeedsMoreInput => continue, + TINFLStatus::Done => return Ok(out_pos), + e => return Err(e), + } + } + // If we ran out of source slices without getting a `Done` from the + // decompression we can call it a failure. + Err(TINFLStatus::FailedCannotMakeProgress) +} + +#[cfg(test)] +mod test { + use super::{ + decompress_slice_iter_to_slice, decompress_to_vec_zlib, decompress_to_vec_zlib_with_limit, + DecompressError, TINFLStatus, + }; + const ENCODED: [u8; 20] = [ + 120, 156, 243, 72, 205, 201, 201, 215, 81, 168, 202, 201, 76, 82, 4, 0, 27, 101, 4, 19, + ]; + + #[test] + fn decompress_vec() { + let res = decompress_to_vec_zlib(&ENCODED[..]).unwrap(); + assert_eq!(res.as_slice(), &b"Hello, zlib!"[..]); + } + + #[test] + fn decompress_vec_with_high_limit() { + let res = decompress_to_vec_zlib_with_limit(&ENCODED[..], 100_000).unwrap(); + assert_eq!(res.as_slice(), &b"Hello, zlib!"[..]); + } + + #[test] + fn fail_to_decompress_with_limit() { + let res = decompress_to_vec_zlib_with_limit(&ENCODED[..], 8); + match res { + Err(DecompressError { + status: TINFLStatus::HasMoreOutput, + .. + }) => (), // expected result + _ => panic!("Decompression output size limit was not enforced"), + } + } + + #[test] + fn test_decompress_slice_iter_to_slice() { + // one slice + let mut out = [0_u8; 12_usize]; + let r = + decompress_slice_iter_to_slice(&mut out, Some(&ENCODED[..]).into_iter(), true, false); + assert_eq!(r, Ok(12)); + assert_eq!(&out[..12], &b"Hello, zlib!"[..]); + + // some chunks at a time + for chunk_size in 1..13 { + // Note: because of https://github.com/Frommi/miniz_oxide/issues/110 our + // out buffer needs to have +1 byte available when the chunk size cuts + // the adler32 data off from the last actual data. + let mut out = [0_u8; 12_usize + 1]; + let r = + decompress_slice_iter_to_slice(&mut out, ENCODED.chunks(chunk_size), true, false); + assert_eq!(r, Ok(12)); + assert_eq!(&out[..12], &b"Hello, zlib!"[..]); + } + + // output buffer too small + let mut out = [0_u8; 3_usize]; + let r = decompress_slice_iter_to_slice(&mut out, ENCODED.chunks(7), true, false); + assert!(r.is_err()); + } +} -- cgit v1.2.3