From 1b6a04ca5504955c571d1c97504fb45ea0befee4 Mon Sep 17 00:00:00 2001 From: Valentin Popov Date: Mon, 8 Jan 2024 01:21:28 +0400 Subject: Initial vendor packages Signed-off-by: Valentin Popov --- vendor/rustix/src/pipe.rs | 220 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 vendor/rustix/src/pipe.rs (limited to 'vendor/rustix/src/pipe.rs') diff --git a/vendor/rustix/src/pipe.rs b/vendor/rustix/src/pipe.rs new file mode 100644 index 0000000..b0a9783 --- /dev/null +++ b/vendor/rustix/src/pipe.rs @@ -0,0 +1,220 @@ +//! `pipe` and related APIs. +//! +//! # Safety +//! +//! `vmsplice` is an unsafe function. + +#![allow(unsafe_code)] + +use crate::fd::OwnedFd; +use crate::{backend, io}; +#[cfg(not(any( + solarish, + windows, + target_os = "espidf", + target_os = "haiku", + target_os = "redox", + target_os = "vita", + target_os = "wasi", +)))] +use backend::c; +#[cfg(linux_kernel)] +use backend::fd::AsFd; + +#[cfg(not(apple))] +pub use backend::pipe::types::PipeFlags; + +#[cfg(linux_kernel)] +pub use backend::pipe::types::{IoSliceRaw, SpliceFlags}; + +/// `PIPE_BUF`—The maximum length at which writes to a pipe are atomic. +/// +/// # References +/// - [Linux] +/// - [POSIX] +/// +/// [Linux]: https://man7.org/linux/man-pages/man7/pipe.7.html +/// [POSIX]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/write.html +#[cfg(not(any( + solarish, + windows, + target_os = "espidf", + target_os = "haiku", + target_os = "hurd", + target_os = "redox", + target_os = "vita", + target_os = "wasi", +)))] +pub const PIPE_BUF: usize = c::PIPE_BUF; + +/// `pipe()`—Creates a pipe. +/// +/// This function creates a pipe and returns two file descriptors, for the +/// reading and writing ends of the pipe, respectively. +/// +/// # References +/// - [POSIX] +/// - [Linux] +/// - [Apple] +/// - [FreeBSD] +/// - [NetBSD] +/// - [OpenBSD] +/// - [DragonFly BSD] +/// - [illumos] +/// - [glibc] +/// +/// [POSIX]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/pipe.html +/// [Linux]: https://man7.org/linux/man-pages/man2/pipe.2.html +/// [Apple]: https://developer.apple.com/library/archive/documentation/System/Conceptual/ManPages_iPhoneOS/man2/pipe.2.html +/// [FreeBSD]: https://man.freebsd.org/cgi/man.cgi?query=pipe&sektion=2 +/// [NetBSD]: https://man.netbsd.org/pipe.2 +/// [OpenBSD]: https://man.openbsd.org/pipe.2 +/// [DragonFly BSD]: https://man.dragonflybsd.org/?command=pipe§ion=2 +/// [illumos]: https://illumos.org/man/2/pipe +/// [glibc]: https://www.gnu.org/software/libc/manual/html_node/Creating-a-Pipe.html +#[inline] +pub fn pipe() -> io::Result<(OwnedFd, OwnedFd)> { + backend::pipe::syscalls::pipe() +} + +/// `pipe2(flags)`—Creates a pipe, with flags. +/// +/// This function creates a pipe and returns two file descriptors, for the +/// reading and writing ends of the pipe, respectively. +/// +/// # References +/// - [Linux] +/// - [FreeBSD] +/// - [NetBSD] +/// - [OpenBSD] +/// - [DragonFly BSD] +/// - [illumos] +/// +/// [Linux]: https://man7.org/linux/man-pages/man2/pipe2.2.html +/// [FreeBSD]: https://man.freebsd.org/cgi/man.cgi?query=pipe2&sektion=2 +/// [NetBSD]: https://man.netbsd.org/pipe2.2 +/// [OpenBSD]: https://man.openbsd.org/pipe2.2 +/// [DragonFly BSD]: https://man.dragonflybsd.org/?command=pipe2§ion=2 +/// [illumos]: https://illumos.org/man/2/pipe2 +#[cfg(not(any( + apple, + target_os = "aix", + target_os = "espidf", + target_os = "haiku", + target_os = "nto" +)))] +#[inline] +#[doc(alias = "pipe2")] +pub fn pipe_with(flags: PipeFlags) -> io::Result<(OwnedFd, OwnedFd)> { + backend::pipe::syscalls::pipe_with(flags) +} + +/// `splice(fd_in, off_in, fd_out, off_out, len, flags)`—Transfer data +/// between a file and a pipe. +/// +/// This function transfers up to `len` bytes of data from the file descriptor +/// `fd_in` to the file descriptor `fd_out`, where one of the file descriptors +/// must refer to a pipe. +/// +/// `off_*` must be `None` if the corresponding fd refers to a pipe. Otherwise +/// its value points to the starting offset to the file, from which the data is +/// read/written. On success, the number of bytes read/written is added to the +/// offset. +/// +/// Passing `None` causes the read/write to start from the file offset, and the +/// file offset is adjusted appropriately. +/// +/// # References +/// - [Linux] +/// +/// [Linux]: https://man7.org/linux/man-pages/man2/splice.2.html +#[cfg(linux_kernel)] +#[inline] +pub fn splice( + fd_in: FdIn, + off_in: Option<&mut u64>, + fd_out: FdOut, + off_out: Option<&mut u64>, + len: usize, + flags: SpliceFlags, +) -> io::Result { + backend::pipe::syscalls::splice(fd_in.as_fd(), off_in, fd_out.as_fd(), off_out, len, flags) +} + +/// `vmsplice(fd, bufs, flags)`—Transfer data between memory and a pipe. +/// +/// If `fd` is the write end of the pipe, the function maps the memory pointer +/// at by `bufs` to the pipe. +/// +/// If `fd` is the read end of the pipe, the function writes data from the pipe +/// to said memory. +/// +/// # Safety +/// +/// If the memory must not be mutated (such as when `bufs` were originally +/// immutable slices), it is up to the caller to ensure that the write end of +/// the pipe is placed in `fd`. +/// +/// Additionally if `SpliceFlags::GIFT` is set, the caller must also ensure +/// that the contents of `bufs` in never modified following the call, and that +/// all of the pointers in `bufs` are page aligned, and the lengths are +/// multiples of a page size in bytes. +/// +/// # References +/// - [Linux] +/// +/// [Linux]: https://man7.org/linux/man-pages/man2/vmsplice.2.html +#[cfg(linux_kernel)] +#[inline] +pub unsafe fn vmsplice( + fd: PipeFd, + bufs: &[IoSliceRaw<'_>], + flags: SpliceFlags, +) -> io::Result { + backend::pipe::syscalls::vmsplice(fd.as_fd(), bufs, flags) +} + +/// `tee(fd_in, fd_out, len, flags)`—Copy data between pipes without +/// consuming it. +/// +/// This reads up to `len` bytes from `in_fd` without consuming them, and +/// writes them to `out_fd`. +/// +/// # References +/// - [Linux] +/// +/// [Linux]: https://man7.org/linux/man-pages/man2/tee.2.html +#[cfg(linux_kernel)] +#[inline] +pub fn tee( + fd_in: FdIn, + fd_out: FdOut, + len: usize, + flags: SpliceFlags, +) -> io::Result { + backend::pipe::syscalls::tee(fd_in.as_fd(), fd_out.as_fd(), len, flags) +} + +/// `fnctl(fd, F_GETPIPE_SZ)`—Return the buffer capacity of a pipe. +/// +/// # References +/// - [Linux] +/// +/// [Linux]: https://man7.org/linux/man-pages/man2/fcntl.2.html +#[cfg(linux_kernel)] +#[inline] +pub fn fcntl_getpipe_size(fd: Fd) -> io::Result { + backend::pipe::syscalls::fcntl_getpipe_sz(fd.as_fd()) +} + +/// `fnctl(fd, F_SETPIPE_SZ)`—Set the buffer capacity of a pipe. +/// +/// # References +/// - [Linux] +/// +/// [Linux]: https://man7.org/linux/man-pages/man2/fcntl.2.html +#[cfg(linux_kernel)] +#[inline] +pub fn fcntl_setpipe_size(fd: Fd, size: usize) -> io::Result<()> { + backend::pipe::syscalls::fcntl_setpipe_sz(fd.as_fd(), size) +} -- cgit v1.2.3