From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/HAL/DUE/Servo.cpp | 159 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 159 insertions(+) create mode 100644 Marlin/src/HAL/DUE/Servo.cpp (limited to 'Marlin/src/HAL/DUE/Servo.cpp') diff --git a/Marlin/src/HAL/DUE/Servo.cpp b/Marlin/src/HAL/DUE/Servo.cpp new file mode 100644 index 0000000..5524aa9 --- /dev/null +++ b/Marlin/src/HAL/DUE/Servo.cpp @@ -0,0 +1,159 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifdef ARDUINO_ARCH_SAM + +#include "../../inc/MarlinConfig.h" + +#if HAS_SERVOS + +#include "../shared/servo.h" +#include "../shared/servo_private.h" + +static volatile int8_t Channel[_Nbr_16timers]; // counter for the servo being pulsed for each timer (or -1 if refresh interval) + +// ------------------------ +/// Interrupt handler for the TC0 channel 1. +// ------------------------ +void Servo_Handler(timer16_Sequence_t timer, Tc *pTc, uint8_t channel); + +#ifdef _useTimer1 + void HANDLER_FOR_TIMER1() { Servo_Handler(_timer1, TC_FOR_TIMER1, CHANNEL_FOR_TIMER1); } +#endif +#ifdef _useTimer2 + void HANDLER_FOR_TIMER2() { Servo_Handler(_timer2, TC_FOR_TIMER2, CHANNEL_FOR_TIMER2); } +#endif +#ifdef _useTimer3 + void HANDLER_FOR_TIMER3() { Servo_Handler(_timer3, TC_FOR_TIMER3, CHANNEL_FOR_TIMER3); } +#endif +#ifdef _useTimer4 + void HANDLER_FOR_TIMER4() { Servo_Handler(_timer4, TC_FOR_TIMER4, CHANNEL_FOR_TIMER4); } +#endif +#ifdef _useTimer5 + void HANDLER_FOR_TIMER5() { Servo_Handler(_timer5, TC_FOR_TIMER5, CHANNEL_FOR_TIMER5); } +#endif + +void Servo_Handler(timer16_Sequence_t timer, Tc *tc, uint8_t channel) { + // clear interrupt + tc->TC_CHANNEL[channel].TC_SR; + if (Channel[timer] < 0) + tc->TC_CHANNEL[channel].TC_CCR |= TC_CCR_SWTRG; // channel set to -1 indicated that refresh interval completed so reset the timer + else if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && SERVO(timer, Channel[timer]).Pin.isActive) + extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated + + Channel[timer]++; // increment to the next channel + if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) { + tc->TC_CHANNEL[channel].TC_RA = tc->TC_CHANNEL[channel].TC_CV + SERVO(timer,Channel[timer]).ticks; + if (SERVO(timer,Channel[timer]).Pin.isActive) // check if activated + extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // its an active channel so pulse it high + } + else { + // finished all channels so wait for the refresh period to expire before starting over + tc->TC_CHANNEL[channel].TC_RA = + tc->TC_CHANNEL[channel].TC_CV < usToTicks(REFRESH_INTERVAL) - 4 + ? (unsigned int)usToTicks(REFRESH_INTERVAL) // allow a few ticks to ensure the next OCR1A not missed + : tc->TC_CHANNEL[channel].TC_CV + 4; // at least REFRESH_INTERVAL has elapsed + Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel + } +} + +static void _initISR(Tc *tc, uint32_t channel, uint32_t id, IRQn_Type irqn) { + pmc_enable_periph_clk(id); + TC_Configure(tc, channel, + TC_CMR_TCCLKS_TIMER_CLOCK3 | // MCK/32 + TC_CMR_WAVE | // Waveform mode + TC_CMR_WAVSEL_UP_RC ); // Counter running up and reset when equals to RC + + /* 84MHz, MCK/32, for 1.5ms: 3937 */ + TC_SetRA(tc, channel, 2625); // 1ms + + /* Configure and enable interrupt */ + NVIC_EnableIRQ(irqn); + // TC_IER_CPAS: RA Compare + tc->TC_CHANNEL[channel].TC_IER = TC_IER_CPAS; + + // Enables the timer clock and performs a software reset to start the counting + TC_Start(tc, channel); +} + +void initISR(timer16_Sequence_t timer) { + #ifdef _useTimer1 + if (timer == _timer1) + _initISR(TC_FOR_TIMER1, CHANNEL_FOR_TIMER1, ID_TC_FOR_TIMER1, IRQn_FOR_TIMER1); + #endif + #ifdef _useTimer2 + if (timer == _timer2) + _initISR(TC_FOR_TIMER2, CHANNEL_FOR_TIMER2, ID_TC_FOR_TIMER2, IRQn_FOR_TIMER2); + #endif + #ifdef _useTimer3 + if (timer == _timer3) + _initISR(TC_FOR_TIMER3, CHANNEL_FOR_TIMER3, ID_TC_FOR_TIMER3, IRQn_FOR_TIMER3); + #endif + #ifdef _useTimer4 + if (timer == _timer4) + _initISR(TC_FOR_TIMER4, CHANNEL_FOR_TIMER4, ID_TC_FOR_TIMER4, IRQn_FOR_TIMER4); + #endif + #ifdef _useTimer5 + if (timer == _timer5) + _initISR(TC_FOR_TIMER5, CHANNEL_FOR_TIMER5, ID_TC_FOR_TIMER5, IRQn_FOR_TIMER5); + #endif +} + +void finISR(timer16_Sequence_t) { + #ifdef _useTimer1 + TC_Stop(TC_FOR_TIMER1, CHANNEL_FOR_TIMER1); + #endif + #ifdef _useTimer2 + TC_Stop(TC_FOR_TIMER2, CHANNEL_FOR_TIMER2); + #endif + #ifdef _useTimer3 + TC_Stop(TC_FOR_TIMER3, CHANNEL_FOR_TIMER3); + #endif + #ifdef _useTimer4 + TC_Stop(TC_FOR_TIMER4, CHANNEL_FOR_TIMER4); + #endif + #ifdef _useTimer5 + TC_Stop(TC_FOR_TIMER5, CHANNEL_FOR_TIMER5); + #endif +} + +#endif // HAS_SERVOS + +#endif // ARDUINO_ARCH_SAM -- cgit v1.2.3