From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/HAL/DUE/usb/sysclk.h | 229 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 Marlin/src/HAL/DUE/usb/sysclk.h (limited to 'Marlin/src/HAL/DUE/usb/sysclk.h') diff --git a/Marlin/src/HAL/DUE/usb/sysclk.h b/Marlin/src/HAL/DUE/usb/sysclk.h new file mode 100644 index 0000000..16db8c8 --- /dev/null +++ b/Marlin/src/HAL/DUE/usb/sysclk.h @@ -0,0 +1,229 @@ +/** + * \file + * + * \brief Chip-specific system clock management functions. + * + * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ +/* + * Support and FAQ: visit Atmel Support + */ + +#ifndef CHIP_SYSCLK_H_INCLUDED +#define CHIP_SYSCLK_H_INCLUDED + +#include "osc.h" +#include "pll.h" + +/** + * \page sysclk_quickstart Quick Start Guide for the System Clock Management service (SAM3A) + * + * This is the quick start guide for the \ref sysclk_group "System Clock Management" + * service, with step-by-step instructions on how to configure and use the service for + * specific use cases. + * + * \section sysclk_quickstart_usecases System Clock Management use cases + * - \ref sysclk_quickstart_basic + * + * \section sysclk_quickstart_basic Basic usage of the System Clock Management service + * This section will present a basic use case for the System Clock Management service. + * This use case will configure the main system clock to 84MHz, using an internal PLL + * module to multiply the frequency of a crystal attached to the microcontroller. + * + * \subsection sysclk_quickstart_use_case_1_prereq Prerequisites + * - None + * + * \subsection sysclk_quickstart_use_case_1_setup_steps Initialization code + * Add to the application initialization code: + * \code + sysclk_init(); +\endcode + * + * \subsection sysclk_quickstart_use_case_1_setup_steps_workflow Workflow + * -# Configure the system clocks according to the settings in conf_clock.h: + * \code sysclk_init(); \endcode + * + * \subsection sysclk_quickstart_use_case_1_example_code Example code + * Add or uncomment the following in your conf_clock.h header file, commenting out all other + * definitions of the same symbol(s): + * \code + #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK + + // Fpll0 = (Fclk * PLL_mul) / PLL_div + #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL + #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL) + #define CONFIG_PLL0_DIV 1 + + // Fbus = Fsys / BUS_div + #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1 +\endcode + * + * \subsection sysclk_quickstart_use_case_1_example_workflow Workflow + * -# Configure the main system clock to use the output of the PLL module as its source: + * \code #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK \endcode + * -# Configure the PLL module to use the fast external fast crystal oscillator as its source: + * \code #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL \endcode + * -# Configure the PLL module to multiply the external fast crystal oscillator frequency up to 84MHz: + * \code + #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL) + #define CONFIG_PLL0_DIV 1 +\endcode + * \note For user boards, \c BOARD_FREQ_MAINCK_XTAL should be defined in the board \c conf_board.h configuration + * file as the frequency of the fast crystal attached to the microcontroller. + * -# Configure the main clock to run at the full 84MHz, disable scaling of the main system clock speed: + * \code + #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1 +\endcode + * \note Some dividers are powers of two, while others are integer division factors. Refer to the + * formulas in the conf_clock.h template commented above each division define. + */ + +/// @cond 0 +/**INDENT-OFF**/ +#ifdef __cplusplus +extern "C" { +#endif +/**INDENT-ON**/ +/// @endcond + +/** + * \weakgroup sysclk_group + * @{ + */ + +//! \name Configuration Symbols +//@{ +/** + * \def CONFIG_SYSCLK_SOURCE + * \brief Initial/static main system clock source + * + * The main system clock will be configured to use this clock during + * initialization. + */ +#ifndef CONFIG_SYSCLK_SOURCE +# define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC +#endif +/** + * \def CONFIG_SYSCLK_PRES + * \brief Initial CPU clock divider (mck) + * + * The MCK will run at + * \f[ + * f_{MCK} = \frac{f_{sys}}{\mathrm{CONFIG\_SYSCLK\_PRES}}\,\mbox{Hz} + * \f] + * after initialization. + */ +#ifndef CONFIG_SYSCLK_PRES +# define CONFIG_SYSCLK_PRES 0 +#endif + +//@} + +//! \name Master Clock Sources (MCK) +//@{ +#define SYSCLK_SRC_SLCK_RC 0 //!< Internal 32kHz RC oscillator as master source clock +#define SYSCLK_SRC_SLCK_XTAL 1 //!< External 32kHz crystal oscillator as master source clock +#define SYSCLK_SRC_SLCK_BYPASS 2 //!< External 32kHz bypass oscillator as master source clock +#define SYSCLK_SRC_MAINCK_4M_RC 3 //!< Internal 4MHz RC oscillator as master source clock +#define SYSCLK_SRC_MAINCK_8M_RC 4 //!< Internal 8MHz RC oscillator as master source clock +#define SYSCLK_SRC_MAINCK_12M_RC 5 //!< Internal 12MHz RC oscillator as master source clock +#define SYSCLK_SRC_MAINCK_XTAL 6 //!< External crystal oscillator as master source clock +#define SYSCLK_SRC_MAINCK_BYPASS 7 //!< External bypass oscillator as master source clock +#define SYSCLK_SRC_PLLACK 8 //!< Use PLLACK as master source clock +#define SYSCLK_SRC_UPLLCK 9 //!< Use UPLLCK as master source clock +//@} + +//! \name Master Clock Prescalers (MCK) +//@{ +#define SYSCLK_PRES_1 PMC_MCKR_PRES_CLK_1 //!< Set master clock prescaler to 1 +#define SYSCLK_PRES_2 PMC_MCKR_PRES_CLK_2 //!< Set master clock prescaler to 2 +#define SYSCLK_PRES_4 PMC_MCKR_PRES_CLK_4 //!< Set master clock prescaler to 4 +#define SYSCLK_PRES_8 PMC_MCKR_PRES_CLK_8 //!< Set master clock prescaler to 8 +#define SYSCLK_PRES_16 PMC_MCKR_PRES_CLK_16 //!< Set master clock prescaler to 16 +#define SYSCLK_PRES_32 PMC_MCKR_PRES_CLK_32 //!< Set master clock prescaler to 32 +#define SYSCLK_PRES_64 PMC_MCKR_PRES_CLK_64 //!< Set master clock prescaler to 64 +#define SYSCLK_PRES_3 PMC_MCKR_PRES_CLK_3 //!< Set master clock prescaler to 3 +//@} + +//! \name USB Clock Sources +//@{ +#define USBCLK_SRC_PLL0 0 //!< Use PLLA +#define USBCLK_SRC_UPLL 1 //!< Use UPLL +//@} + +/** + * \def CONFIG_USBCLK_SOURCE + * \brief Configuration symbol for the USB generic clock source + * + * Sets the clock source to use for the USB. The source must also be properly + * configured. + * + * Define this to one of the \c USBCLK_SRC_xxx settings. Leave it undefined if + * USB is not required. + */ +#ifdef __DOXYGEN__ +# define CONFIG_USBCLK_SOURCE +#endif + +/** + * \def CONFIG_USBCLK_DIV + * \brief Configuration symbol for the USB generic clock divider setting + * + * Sets the clock division for the USB generic clock. If a USB clock source is + * selected with CONFIG_USBCLK_SOURCE, this configuration symbol must also be + * defined. + */ +#ifdef __DOXYGEN__ +# define CONFIG_USBCLK_DIV +#endif + + +extern void sysclk_enable_usb(void); +extern void sysclk_disable_usb(void); + +//! @} + +/// @cond 0 +/**INDENT-OFF**/ +#ifdef __cplusplus +} +#endif +/**INDENT-ON**/ +/// @endcond + +#endif /* CHIP_SYSCLK_H_INCLUDED */ -- cgit v1.2.3