From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit
---
Marlin/src/HAL/DUE/usb/udi_cdc.h | 810 +++++++++++++++++++++++++++++++++++++++
1 file changed, 810 insertions(+)
create mode 100644 Marlin/src/HAL/DUE/usb/udi_cdc.h
(limited to 'Marlin/src/HAL/DUE/usb/udi_cdc.h')
diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.h b/Marlin/src/HAL/DUE/usb/udi_cdc.h
new file mode 100644
index 0000000..0ecf7bb
--- /dev/null
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc.h
@@ -0,0 +1,810 @@
+/**
+ * \file
+ *
+ * \brief USB Device Communication Device Class (CDC) interface definitions.
+ *
+ * Copyright (c) 2009-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _UDI_CDC_H_
+#define _UDI_CDC_H_
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "usb_protocol_cdc.h"
+#include "udd.h"
+#include "udc_desc.h"
+#include "udi.h"
+
+// Check the number of port
+#ifndef UDI_CDC_PORT_NB
+# define UDI_CDC_PORT_NB 1
+#endif
+#if (UDI_CDC_PORT_NB < 1) || (UDI_CDC_PORT_NB > 7)
+# error UDI_CDC_PORT_NB must be between 1 and 7
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \addtogroup udi_cdc_group_udc
+ * @{
+ */
+
+//! Global structure which contains standard UDI API for UDC
+extern UDC_DESC_STORAGE udi_api_t udi_api_cdc_comm;
+extern UDC_DESC_STORAGE udi_api_t udi_api_cdc_data;
+//@}
+
+/**
+ * \ingroup udi_cdc_group
+ * \defgroup udi_cdc_group_desc USB interface descriptors
+ *
+ * The following structures provide predefined USB interface descriptors.
+ * It must be used to define the final USB descriptors.
+ */
+//@{
+
+/**
+ * \brief Communication Class interface descriptor
+ *
+ * Interface descriptor with associated functional and endpoint
+ * descriptors for the CDC Communication Class interface.
+ */
+typedef struct {
+ //! Standard interface descriptor
+ usb_iface_desc_t iface;
+ //! CDC Header functional descriptor
+ usb_cdc_hdr_desc_t header;
+ //! CDC Abstract Control Model functional descriptor
+ usb_cdc_acm_desc_t acm;
+ //! CDC Union functional descriptor
+ usb_cdc_union_desc_t union_desc;
+ //! CDC Call Management functional descriptor
+ usb_cdc_call_mgmt_desc_t call_mgmt;
+ //! Notification endpoint descriptor
+ usb_ep_desc_t ep_notify;
+} udi_cdc_comm_desc_t;
+
+
+/**
+ * \brief Data Class interface descriptor
+ *
+ * Interface descriptor with associated endpoint descriptors for the
+ * CDC Data Class interface.
+ */
+typedef struct {
+ //! Standard interface descriptor
+ usb_iface_desc_t iface;
+ //! Data IN/OUT endpoint descriptors
+ usb_ep_desc_t ep_in;
+ usb_ep_desc_t ep_out;
+} udi_cdc_data_desc_t;
+
+
+//! CDC communication endpoints size for all speeds
+#define UDI_CDC_COMM_EP_SIZE 64
+//! CDC data endpoints size for FS speed (8B, 16B, 32B, 64B)
+#define UDI_CDC_DATA_EPS_FS_SIZE 64
+//! CDC data endpoints size for HS speed (512B only)
+#define UDI_CDC_DATA_EPS_HS_SIZE 512
+
+/**
+ * \name Content of interface descriptors
+ * Up to 7 CDC interfaces can be implemented on a USB device.
+ */
+//@{
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_0
+#define UDI_CDC_IAD_STRING_ID_0 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_0
+#define UDI_CDC_COMM_STRING_ID_0 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_0
+#define UDI_CDC_DATA_STRING_ID_0 0
+#endif
+#define UDI_CDC_IAD_DESC_0 UDI_CDC_IAD_DESC(0)
+#define UDI_CDC_COMM_DESC_0 UDI_CDC_COMM_DESC(0)
+#define UDI_CDC_DATA_DESC_0_FS UDI_CDC_DATA_DESC_FS(0)
+#define UDI_CDC_DATA_DESC_0_HS UDI_CDC_DATA_DESC_HS(0)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_1
+#define UDI_CDC_IAD_STRING_ID_1 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_1
+#define UDI_CDC_COMM_STRING_ID_1 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_1
+#define UDI_CDC_DATA_STRING_ID_1 0
+#endif
+#define UDI_CDC_IAD_DESC_1 UDI_CDC_IAD_DESC(1)
+#define UDI_CDC_COMM_DESC_1 UDI_CDC_COMM_DESC(1)
+#define UDI_CDC_DATA_DESC_1_FS UDI_CDC_DATA_DESC_FS(1)
+#define UDI_CDC_DATA_DESC_1_HS UDI_CDC_DATA_DESC_HS(1)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_2
+#define UDI_CDC_IAD_STRING_ID_2 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_2
+#define UDI_CDC_COMM_STRING_ID_2 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_2
+#define UDI_CDC_DATA_STRING_ID_2 0
+#endif
+#define UDI_CDC_IAD_DESC_2 UDI_CDC_IAD_DESC(2)
+#define UDI_CDC_COMM_DESC_2 UDI_CDC_COMM_DESC(2)
+#define UDI_CDC_DATA_DESC_2_FS UDI_CDC_DATA_DESC_FS(2)
+#define UDI_CDC_DATA_DESC_2_HS UDI_CDC_DATA_DESC_HS(2)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_3
+#define UDI_CDC_IAD_STRING_ID_3 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_3
+#define UDI_CDC_COMM_STRING_ID_3 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_3
+#define UDI_CDC_DATA_STRING_ID_3 0
+#endif
+#define UDI_CDC_IAD_DESC_3 UDI_CDC_IAD_DESC(3)
+#define UDI_CDC_COMM_DESC_3 UDI_CDC_COMM_DESC(3)
+#define UDI_CDC_DATA_DESC_3_FS UDI_CDC_DATA_DESC_FS(3)
+#define UDI_CDC_DATA_DESC_3_HS UDI_CDC_DATA_DESC_HS(3)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_4
+#define UDI_CDC_IAD_STRING_ID_4 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_4
+#define UDI_CDC_COMM_STRING_ID_4 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_4
+#define UDI_CDC_DATA_STRING_ID_4 0
+#endif
+#define UDI_CDC_IAD_DESC_4 UDI_CDC_IAD_DESC(4)
+#define UDI_CDC_COMM_DESC_4 UDI_CDC_COMM_DESC(4)
+#define UDI_CDC_DATA_DESC_4_FS UDI_CDC_DATA_DESC_FS(4)
+#define UDI_CDC_DATA_DESC_4_HS UDI_CDC_DATA_DESC_HS(4)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_5
+#define UDI_CDC_IAD_STRING_ID_5 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_5
+#define UDI_CDC_COMM_STRING_ID_5 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_5
+#define UDI_CDC_DATA_STRING_ID_5 0
+#endif
+#define UDI_CDC_IAD_DESC_5 UDI_CDC_IAD_DESC(5)
+#define UDI_CDC_COMM_DESC_5 UDI_CDC_COMM_DESC(5)
+#define UDI_CDC_DATA_DESC_5_FS UDI_CDC_DATA_DESC_FS(5)
+#define UDI_CDC_DATA_DESC_5_HS UDI_CDC_DATA_DESC_HS(5)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_6
+#define UDI_CDC_IAD_STRING_ID_6 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_6
+#define UDI_CDC_COMM_STRING_ID_6 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_6
+#define UDI_CDC_DATA_STRING_ID_6 0
+#endif
+#define UDI_CDC_IAD_DESC_6 UDI_CDC_IAD_DESC(6)
+#define UDI_CDC_COMM_DESC_6 UDI_CDC_COMM_DESC(6)
+#define UDI_CDC_DATA_DESC_6_FS UDI_CDC_DATA_DESC_FS(6)
+#define UDI_CDC_DATA_DESC_6_HS UDI_CDC_DATA_DESC_HS(6)
+//@}
+
+
+//! Content of CDC IAD interface descriptor for all speeds
+#define UDI_CDC_IAD_DESC(port) { \
+ .bLength = sizeof(usb_iad_desc_t),\
+ .bDescriptorType = USB_DT_IAD,\
+ .bInterfaceCount = 2,\
+ .bFunctionClass = CDC_CLASS_COMM,\
+ .bFunctionSubClass = CDC_SUBCLASS_ACM,\
+ .bFunctionProtocol = CDC_PROTOCOL_V25TER,\
+ .bFirstInterface = UDI_CDC_COMM_IFACE_NUMBER_##port,\
+ .iFunction = UDI_CDC_IAD_STRING_ID_##port,\
+ }
+
+//! Content of CDC COMM interface descriptor for all speeds
+#define UDI_CDC_COMM_DESC(port) { \
+ .iface.bLength = sizeof(usb_iface_desc_t),\
+ .iface.bDescriptorType = USB_DT_INTERFACE,\
+ .iface.bAlternateSetting = 0,\
+ .iface.bNumEndpoints = 1,\
+ .iface.bInterfaceClass = CDC_CLASS_COMM,\
+ .iface.bInterfaceSubClass = CDC_SUBCLASS_ACM,\
+ .iface.bInterfaceProtocol = CDC_PROTOCOL_V25TER,\
+ .header.bFunctionLength = sizeof(usb_cdc_hdr_desc_t),\
+ .header.bDescriptorType = CDC_CS_INTERFACE,\
+ .header.bDescriptorSubtype = CDC_SCS_HEADER,\
+ .header.bcdCDC = LE16(0x0110),\
+ .call_mgmt.bFunctionLength = sizeof(usb_cdc_call_mgmt_desc_t),\
+ .call_mgmt.bDescriptorType = CDC_CS_INTERFACE,\
+ .call_mgmt.bDescriptorSubtype = CDC_SCS_CALL_MGMT,\
+ .call_mgmt.bmCapabilities = \
+ CDC_CALL_MGMT_SUPPORTED | CDC_CALL_MGMT_OVER_DCI,\
+ .acm.bFunctionLength = sizeof(usb_cdc_acm_desc_t),\
+ .acm.bDescriptorType = CDC_CS_INTERFACE,\
+ .acm.bDescriptorSubtype = CDC_SCS_ACM,\
+ .acm.bmCapabilities = CDC_ACM_SUPPORT_LINE_REQUESTS,\
+ .union_desc.bFunctionLength = sizeof(usb_cdc_union_desc_t),\
+ .union_desc.bDescriptorType = CDC_CS_INTERFACE,\
+ .union_desc.bDescriptorSubtype= CDC_SCS_UNION,\
+ .ep_notify.bLength = sizeof(usb_ep_desc_t),\
+ .ep_notify.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_notify.bmAttributes = USB_EP_TYPE_INTERRUPT,\
+ .ep_notify.wMaxPacketSize = LE16(UDI_CDC_COMM_EP_SIZE),\
+ .ep_notify.bInterval = 0x10,\
+ .ep_notify.bEndpointAddress = UDI_CDC_COMM_EP_##port,\
+ .iface.bInterfaceNumber = UDI_CDC_COMM_IFACE_NUMBER_##port,\
+ .call_mgmt.bDataInterface = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .union_desc.bMasterInterface = UDI_CDC_COMM_IFACE_NUMBER_##port,\
+ .union_desc.bSlaveInterface0 = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .iface.iInterface = UDI_CDC_COMM_STRING_ID_##port,\
+ }
+
+//! Content of CDC DATA interface descriptors
+#define UDI_CDC_DATA_DESC_COMMON \
+ .iface.bLength = sizeof(usb_iface_desc_t),\
+ .iface.bDescriptorType = USB_DT_INTERFACE,\
+ .iface.bAlternateSetting = 0,\
+ .iface.bNumEndpoints = 2,\
+ .iface.bInterfaceClass = CDC_CLASS_DATA,\
+ .iface.bInterfaceSubClass = 0,\
+ .iface.bInterfaceProtocol = 0,\
+ .ep_in.bLength = sizeof(usb_ep_desc_t),\
+ .ep_in.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_in.bmAttributes = USB_EP_TYPE_BULK,\
+ .ep_in.bInterval = 0,\
+ .ep_out.bLength = sizeof(usb_ep_desc_t),\
+ .ep_out.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_out.bmAttributes = USB_EP_TYPE_BULK,\
+ .ep_out.bInterval = 0,
+
+#define UDI_CDC_DATA_DESC_FS(port) { \
+ UDI_CDC_DATA_DESC_COMMON \
+ .ep_in.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_FS_SIZE),\
+ .ep_out.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_FS_SIZE),\
+ .ep_in.bEndpointAddress = UDI_CDC_DATA_EP_IN_##port,\
+ .ep_out.bEndpointAddress = UDI_CDC_DATA_EP_OUT_##port,\
+ .iface.bInterfaceNumber = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .iface.iInterface = UDI_CDC_DATA_STRING_ID_##port,\
+ }
+
+#define UDI_CDC_DATA_DESC_HS(port) { \
+ UDI_CDC_DATA_DESC_COMMON \
+ .ep_in.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_HS_SIZE),\
+ .ep_out.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_HS_SIZE),\
+ .ep_in.bEndpointAddress = UDI_CDC_DATA_EP_IN_##port,\
+ .ep_out.bEndpointAddress = UDI_CDC_DATA_EP_OUT_##port,\
+ .iface.bInterfaceNumber = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .iface.iInterface = UDI_CDC_DATA_STRING_ID_##port,\
+ }
+
+//@}
+
+/**
+ * \ingroup udi_group
+ * \defgroup udi_cdc_group USB Device Interface (UDI) for Communication Class Device (CDC)
+ *
+ * Common APIs used by high level application to use this USB class.
+ *
+ * These routines are used to transfer and control data
+ * to/from USB CDC endpoint.
+ *
+ * See \ref udi_cdc_quickstart.
+ * @{
+ */
+
+/**
+ * \name Interface for application with single CDC interface support
+ */
+//@{
+
+/**
+ * \brief Notify a state change of DCD signal
+ *
+ * \param b_set DCD is enabled if true, else disabled
+ */
+void udi_cdc_ctrl_signal_dcd(bool b_set);
+
+/**
+ * \brief Notify a state change of DSR signal
+ *
+ * \param b_set DSR is enabled if true, else disabled
+ */
+void udi_cdc_ctrl_signal_dsr(bool b_set);
+
+/**
+ * \brief Notify a framing error
+ */
+void udi_cdc_signal_framing_error(void);
+
+/**
+ * \brief Notify a parity error
+ */
+void udi_cdc_signal_parity_error(void);
+
+/**
+ * \brief Notify a overrun
+ */
+void udi_cdc_signal_overrun(void);
+
+/**
+ * \brief Gets the number of byte received
+ *
+ * \return the number of data available
+ */
+iram_size_t udi_cdc_get_nb_received_data(void);
+
+/**
+ * \brief This function checks if a character has been received on the CDC line
+ *
+ * \return \c 1 if a byte is ready to be read.
+ */
+bool udi_cdc_is_rx_ready(void);
+
+/**
+ * \brief Waits and gets a value on CDC line
+ *
+ * \return value read on CDC line
+ */
+int udi_cdc_getc(void);
+
+/**
+ * \brief Reads a RAM buffer on CDC line
+ *
+ * \param buf Values read
+ * \param size Number of value read
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_read_buf(void* buf, iram_size_t size);
+
+/**
+ * \brief Non polling reads of a up to 'size' data from CDC line
+ *
+ * \param port Communication port number to manage
+ * \param buf Buffer where to store read data
+ * \param size Maximum number of data to read (size of buffer)
+ *
+ * \return the number of data effectively read
+ */
+iram_size_t udi_cdc_read_no_polling(void* buf, iram_size_t size);
+
+/**
+ * \brief Gets the number of free byte in TX buffer
+ *
+ * \return the number of free byte in TX buffer
+ */
+iram_size_t udi_cdc_get_free_tx_buffer(void);
+
+/**
+ * \brief This function checks if a new character sent is possible
+ * The type int is used to support scanf redirection from compiler LIB.
+ *
+ * \return \c 1 if a new character can be sent
+ */
+bool udi_cdc_is_tx_ready(void);
+
+/**
+ * \brief Puts a byte on CDC line
+ * The type int is used to support printf redirection from compiler LIB.
+ *
+ * \param value Value to put
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+int udi_cdc_putc(int value);
+
+/**
+ * \brief Writes a RAM buffer on CDC line
+ *
+ * \param buf Values to write
+ * \param size Number of value to write
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_write_buf(const void* buf, iram_size_t size);
+//@}
+
+/**
+ * \name Interface for application with multi CDC interfaces support
+ */
+//@{
+
+/**
+ * \brief Notify a state change of DCD signal
+ *
+ * \param port Communication port number to manage
+ * \param b_set DCD is enabled if true, else disabled
+ */
+void udi_cdc_multi_ctrl_signal_dcd(uint8_t port, bool b_set);
+
+/**
+ * \brief Notify a state change of DSR signal
+ *
+ * \param port Communication port number to manage
+ * \param b_set DSR is enabled if true, else disabled
+ */
+void udi_cdc_multi_ctrl_signal_dsr(uint8_t port, bool b_set);
+
+/**
+ * \brief Notify a framing error
+ *
+ * \param port Communication port number to manage
+ */
+void udi_cdc_multi_signal_framing_error(uint8_t port);
+
+/**
+ * \brief Notify a parity error
+ *
+ * \param port Communication port number to manage
+ */
+void udi_cdc_multi_signal_parity_error(uint8_t port);
+
+/**
+ * \brief Notify a overrun
+ *
+ * \param port Communication port number to manage
+ */
+void udi_cdc_multi_signal_overrun(uint8_t port);
+
+/**
+ * \brief Gets the number of byte received
+ *
+ * \param port Communication port number to manage
+ *
+ * \return the number of data available
+ */
+iram_size_t udi_cdc_multi_get_nb_received_data(uint8_t port);
+
+/**
+ * \brief This function checks if a character has been received on the CDC line
+ *
+ * \param port Communication port number to manage
+ *
+ * \return \c 1 if a byte is ready to be read.
+ */
+bool udi_cdc_multi_is_rx_ready(uint8_t port);
+
+/**
+ * \brief Waits and gets a value on CDC line
+ *
+ * \param port Communication port number to manage
+ *
+ * \return value read on CDC line
+ */
+int udi_cdc_multi_getc(uint8_t port);
+
+/**
+ * \brief Reads a RAM buffer on CDC line
+ *
+ * \param port Communication port number to manage
+ * \param buf Values read
+ * \param size Number of values read
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_multi_read_buf(uint8_t port, void* buf, iram_size_t size);
+
+/**
+ * \brief Gets the number of free byte in TX buffer
+ *
+ * \param port Communication port number to manage
+ *
+ * \return the number of free byte in TX buffer
+ */
+iram_size_t udi_cdc_multi_get_free_tx_buffer(uint8_t port);
+
+/**
+ * \brief This function checks if a new character sent is possible
+ * The type int is used to support scanf redirection from compiler LIB.
+ *
+ * \param port Communication port number to manage
+ *
+ * \return \c 1 if a new character can be sent
+ */
+bool udi_cdc_multi_is_tx_ready(uint8_t port);
+
+/**
+ * \brief Puts a byte on CDC line
+ * The type int is used to support printf redirection from compiler LIB.
+ *
+ * \param port Communication port number to manage
+ * \param value Value to put
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+int udi_cdc_multi_putc(uint8_t port, int value);
+
+/**
+ * \brief Writes a RAM buffer on CDC line
+ *
+ * \param port Communication port number to manage
+ * \param buf Values to write
+ * \param size Number of value to write
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t size);
+//@}
+
+//@}
+
+/**
+ * \page udi_cdc_quickstart Quick start guide for USB device Communication Class Device module (UDI CDC)
+ *
+ * This is the quick start guide for the \ref udi_cdc_group
+ * "USB device interface CDC module (UDI CDC)" with step-by-step instructions on
+ * how to configure and use the modules in a selection of use cases.
+ *
+ * The use cases contain several code fragments. The code fragments in the
+ * steps for setup can be copied into a custom initialization function, while
+ * the steps for usage can be copied into, e.g., the main application function.
+ *
+ * \section udi_cdc_basic_use_case Basic use case
+ * In this basic use case, the "USB CDC (Single Interface Device)" module is used
+ * with only one communication port.
+ * The "USB CDC (Composite Device)" module usage is described in \ref udi_cdc_use_cases
+ * "Advanced use cases".
+ *
+ * \section udi_cdc_basic_use_case_setup Setup steps
+ * \subsection udi_cdc_basic_use_case_setup_prereq Prerequisites
+ * \copydetails udc_basic_use_case_setup_prereq
+ * \subsection udi_cdc_basic_use_case_setup_code Example code
+ * \copydetails udc_basic_use_case_setup_code
+ * \subsection udi_cdc_basic_use_case_setup_flow Workflow
+ * \copydetails udc_basic_use_case_setup_flow
+ *
+ * \section udi_cdc_basic_use_case_usage Usage steps
+ *
+ * \subsection udi_cdc_basic_use_case_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
+ extern bool my_callback_cdc_enable(void);
+ #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
+ extern void my_callback_cdc_disable(void);
+ #define UDI_CDC_LOW_RATE
+
+ #define UDI_CDC_DEFAULT_RATE 115200
+ #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
+ #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
+ #define UDI_CDC_DEFAULT_DATABITS 8
+
+ #include "udi_cdc_conf.h" // At the end of conf_usb.h file
+\endcode
+ *
+ * Add to application C-file:
+ * \code
+ static bool my_flag_autorize_cdc_transfert = false;
+ bool my_callback_cdc_enable(void)
+ {
+ my_flag_autorize_cdc_transfert = true;
+ return true;
+ }
+ void my_callback_cdc_disable(void)
+ {
+ my_flag_autorize_cdc_transfert = false;
+ }
+
+ void task(void)
+ {
+ if (my_flag_autorize_cdc_transfert) {
+ udi_cdc_putc('A');
+ udi_cdc_getc();
+ }
+ }
+\endcode
+ *
+ * \subsection udi_cdc_basic_use_case_setup_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following configuration,
+ * which is the USB device CDC configuration:
+ * - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for CDC \endcode
+ * \note The USB serial number is mandatory when a CDC interface is used.
+ * - \code #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
+ extern bool my_callback_cdc_enable(void); \endcode
+ * \note After the device enumeration (detecting and identifying USB devices),
+ * the USB host starts the device configuration. When the USB CDC interface
+ * from the device is accepted by the host, the USB host enables this interface and the
+ * UDI_CDC_ENABLE_EXT() callback function is called and return true.
+ * Thus, when this event is received, the data transfer on CDC interface are authorized.
+ * - \code #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
+ extern void my_callback_cdc_disable(void); \endcode
+ * \note When the USB device is unplugged or is reset by the USB host, the USB
+ * interface is disabled and the UDI_CDC_DISABLE_EXT() callback function
+ * is called. Thus, the data transfer must be stopped on CDC interface.
+ * - \code #define UDI_CDC_LOW_RATE \endcode
+ * \note Define it when the transfer CDC Device to Host is a low rate
+ * (<512000 bauds) to reduce CDC buffers size.
+ * - \code #define UDI_CDC_DEFAULT_RATE 115200
+ #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
+ #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
+ #define UDI_CDC_DEFAULT_DATABITS 8 \endcode
+ * \note Default configuration of communication port at startup.
+ * -# Send or wait data on CDC line:
+ * - \code // Waits and gets a value on CDC line
+ int udi_cdc_getc(void);
+ // Reads a RAM buffer on CDC line
+ iram_size_t udi_cdc_read_buf(int* buf, iram_size_t size);
+ // Puts a byte on CDC line
+ int udi_cdc_putc(int value);
+ // Writes a RAM buffer on CDC line
+ iram_size_t udi_cdc_write_buf(const int* buf, iram_size_t size); \endcode
+ *
+ * \section udi_cdc_use_cases Advanced use cases
+ * For more advanced use of the UDI CDC module, see the following use cases:
+ * - \subpage udi_cdc_use_case_composite
+ * - \subpage udc_use_case_1
+ * - \subpage udc_use_case_2
+ * - \subpage udc_use_case_3
+ * - \subpage udc_use_case_4
+ * - \subpage udc_use_case_5
+ * - \subpage udc_use_case_6
+ */
+
+/**
+ * \page udi_cdc_use_case_composite CDC in a composite device
+ *
+ * A USB Composite Device is a USB Device which uses more than one USB class.
+ * In this use case, the "USB CDC (Composite Device)" module is used to
+ * create a USB composite device. Thus, this USB module can be associated with
+ * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
+ *
+ * Also, you can refer to application note
+ *
+ * AVR4902 ASF - USB Composite Device.
+ *
+ * \section udi_cdc_use_case_composite_setup Setup steps
+ * For the setup code of this use case to work, the
+ * \ref udi_cdc_basic_use_case "basic use case" must be followed.
+ *
+ * \section udi_cdc_use_case_composite_usage Usage steps
+ *
+ * \subsection udi_cdc_use_case_composite_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_EP_CTRL_SIZE 64
+ #define USB_DEVICE_NB_INTERFACE (X+2)
+ #define USB_DEVICE_MAX_EP (X+3)
+
+ #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
+ #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
+ #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+ #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
+ #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1
+
+ #define UDI_COMPOSITE_DESC_T \
+ usb_iad_desc_t udi_cdc_iad; \
+ udi_cdc_comm_desc_t udi_cdc_comm; \
+ udi_cdc_data_desc_t udi_cdc_data; \
+ ...
+ #define UDI_COMPOSITE_DESC_FS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
+ ...
+ #define UDI_COMPOSITE_DESC_HS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
+ ...
+ #define UDI_COMPOSITE_API \
+ &udi_api_cdc_comm, \
+ &udi_api_cdc_data, \
+ ...
+\endcode
+ *
+ * \subsection udi_cdc_use_case_composite_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters
+ * required for a USB composite device configuration:
+ * - \code // Endpoint control size, This must be:
+ // - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM)
+ // - 64 for a high speed device
+ #define USB_DEVICE_EP_CTRL_SIZE 64
+ // Total Number of interfaces on this USB device.
+ // Add 2 for CDC.
+ #define USB_DEVICE_NB_INTERFACE (X+2)
+ // Total number of endpoints on this USB device.
+ // This must include each endpoint for each interface.
+ // Add 3 for CDC.
+ #define USB_DEVICE_MAX_EP (X+3) \endcode
+ * -# Ensure that conf_usb.h contains the description of
+ * composite device:
+ * - \code // The endpoint numbers chosen by you for the CDC.
+ // The endpoint numbers starting from 1.
+ #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
+ #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
+ #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+ // The interface index of an interface starting from 0
+ #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
+ #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 \endcode
+ * -# Ensure that conf_usb.h contains the following parameters
+ * required for a USB composite device configuration:
+ * - \code // USB Interfaces descriptor structure
+ #define UDI_COMPOSITE_DESC_T \
+ ...
+ usb_iad_desc_t udi_cdc_iad; \
+ udi_cdc_comm_desc_t udi_cdc_comm; \
+ udi_cdc_data_desc_t udi_cdc_data; \
+ ...
+ // USB Interfaces descriptor value for Full Speed
+ #define UDI_COMPOSITE_DESC_FS \
+ ...
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
+ ...
+ // USB Interfaces descriptor value for High Speed
+ #define UDI_COMPOSITE_DESC_HS \
+ ...
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
+ ...
+ // USB Interface APIs
+ #define UDI_COMPOSITE_API \
+ ...
+ &udi_api_cdc_comm, \
+ &udi_api_cdc_data, \
+ ... \endcode
+ * - \note The descriptors order given in the four lists above must be the
+ * same as the order defined by all interface indexes. The interface index
+ * orders are defined through UDI_X_IFACE_NUMBER defines.\n
+ * Also, the CDC requires a USB Interface Association Descriptor (IAD) for
+ * composite device.
+ */
+
+#ifdef __cplusplus
+}
+#endif
+#endif // _UDI_CDC_H_
--
cgit v1.2.3