From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 Marlin/src/HAL/DUE/watchdog.cpp | 114 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)
 create mode 100644 Marlin/src/HAL/DUE/watchdog.cpp

(limited to 'Marlin/src/HAL/DUE/watchdog.cpp')

diff --git a/Marlin/src/HAL/DUE/watchdog.cpp b/Marlin/src/HAL/DUE/watchdog.cpp
new file mode 100644
index 0000000..e144db8
--- /dev/null
+++ b/Marlin/src/HAL/DUE/watchdog.cpp
@@ -0,0 +1,114 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+#include "../../MarlinCore.h"
+#include "watchdog.h"
+
+// Override Arduino runtime to either config or disable the watchdog
+//
+// We need to configure the watchdog as soon as possible in the boot
+// process, because watchdog initialization at hardware reset on SAM3X8E
+// is unreliable, and there is risk of unintended resets if we delay
+// that initialization to a later time.
+void watchdogSetup() {
+
+  #if ENABLED(USE_WATCHDOG)
+
+    // 4 seconds timeout
+    uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);
+
+    // Calculate timeout value in WDT counter ticks: This assumes
+    // the slow clock is running at 32.768 kHz watchdog
+    // frequency is therefore 32768 / 128 = 256 Hz
+    timeout = (timeout << 8) / 1000;
+    if (timeout == 0)
+      timeout = 1;
+    else if (timeout > 0xFFF)
+      timeout = 0xFFF;
+
+    // We want to enable the watchdog with the specified timeout
+    uint32_t value =
+      WDT_MR_WDV(timeout) |               // With the specified timeout
+      WDT_MR_WDD(timeout) |               // and no invalid write window
+    #if !(SAMV70 || SAMV71 || SAME70 || SAMS70)
+      WDT_MR_WDRPROC   |                  // WDT fault resets processor only - We want
+                                          // to keep PIO controller state
+    #endif
+      WDT_MR_WDDBGHLT  |                  // WDT stops in debug state.
+      WDT_MR_WDIDLEHLT;                   // WDT stops in idle state.
+
+    #if ENABLED(WATCHDOG_RESET_MANUAL)
+      // We enable the watchdog timer, but only for the interrupt.
+
+      // Configure WDT to only trigger an interrupt
+      value |= WDT_MR_WDFIEN;             // Enable WDT fault interrupt.
+
+      // Disable WDT interrupt (just in case, to avoid triggering it!)
+      NVIC_DisableIRQ(WDT_IRQn);
+
+      // We NEED memory barriers to ensure Interrupts are actually disabled!
+      // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
+      __DSB();
+      __ISB();
+
+      // Initialize WDT with the given parameters
+      WDT_Enable(WDT, value);
+
+      // Configure and enable WDT interrupt.
+      NVIC_ClearPendingIRQ(WDT_IRQn);
+      NVIC_SetPriority(WDT_IRQn, 0); // Use highest priority, so we detect all kinds of lockups
+      NVIC_EnableIRQ(WDT_IRQn);
+
+    #else
+
+      // a WDT fault triggers a reset
+      value |= WDT_MR_WDRSTEN;
+
+      // Initialize WDT with the given parameters
+      WDT_Enable(WDT, value);
+
+    #endif
+
+    // Reset the watchdog
+    WDT_Restart(WDT);
+
+  #else
+
+    // Make sure to completely disable the Watchdog
+    WDT_Disable(WDT);
+
+  #endif
+}
+
+#if ENABLED(USE_WATCHDOG)
+  // Initialize watchdog - On SAM3X, Watchdog was already configured
+  //  and enabled or disabled at startup, so no need to reconfigure it
+  //  here.
+  void watchdog_init() {
+    // Reset watchdog to start clean
+    WDT_Restart(WDT);
+  }
+#endif // USE_WATCHDOG
+
+#endif
-- 
cgit v1.2.3