From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 Marlin/src/HAL/LINUX/main.cpp | 134 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 Marlin/src/HAL/LINUX/main.cpp

(limited to 'Marlin/src/HAL/LINUX/main.cpp')

diff --git a/Marlin/src/HAL/LINUX/main.cpp b/Marlin/src/HAL/LINUX/main.cpp
new file mode 100644
index 0000000..c409a83
--- /dev/null
+++ b/Marlin/src/HAL/LINUX/main.cpp
@@ -0,0 +1,134 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef __PLAT_LINUX__
+
+//#define GPIO_LOGGING // Full GPIO and Positional Logging
+
+#include "../../inc/MarlinConfig.h"
+#include "../shared/Delay.h"
+#include "hardware/IOLoggerCSV.h"
+#include "hardware/Heater.h"
+#include "hardware/LinearAxis.h"
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <thread>
+#include <iostream>
+#include <fstream>
+
+extern void setup();
+extern void loop();
+
+// simple stdout / stdin implementation for fake serial port
+void write_serial_thread() {
+  for (;;) {
+    for (std::size_t i = usb_serial.transmit_buffer.available(); i > 0; i--) {
+      fputc(usb_serial.transmit_buffer.read(), stdout);
+    }
+    std::this_thread::yield();
+  }
+}
+
+void read_serial_thread() {
+  char buffer[255] = {};
+  for (;;) {
+    std::size_t len = _MIN(usb_serial.receive_buffer.free(), 254U);
+    if (fgets(buffer, len, stdin))
+      for (std::size_t i = 0; i < strlen(buffer); i++)
+        usb_serial.receive_buffer.write(buffer[i]);
+    std::this_thread::yield();
+  }
+}
+
+void simulation_loop() {
+  Heater hotend(HEATER_0_PIN, TEMP_0_PIN);
+  Heater bed(HEATER_BED_PIN, TEMP_BED_PIN);
+  LinearAxis x_axis(X_ENABLE_PIN, X_DIR_PIN, X_STEP_PIN, X_MIN_PIN, X_MAX_PIN);
+  LinearAxis y_axis(Y_ENABLE_PIN, Y_DIR_PIN, Y_STEP_PIN, Y_MIN_PIN, Y_MAX_PIN);
+  LinearAxis z_axis(Z_ENABLE_PIN, Z_DIR_PIN, Z_STEP_PIN, Z_MIN_PIN, Z_MAX_PIN);
+  LinearAxis extruder0(E0_ENABLE_PIN, E0_DIR_PIN, E0_STEP_PIN, P_NC, P_NC);
+
+  #ifdef GPIO_LOGGING
+    IOLoggerCSV logger("all_gpio_log.csv");
+    Gpio::attachLogger(&logger);
+
+    std::ofstream position_log;
+    position_log.open("axis_position_log.csv");
+
+    int32_t x,y,z;
+  #endif
+
+  for (;;) {
+
+    hotend.update();
+    bed.update();
+
+    x_axis.update();
+    y_axis.update();
+    z_axis.update();
+    extruder0.update();
+
+    #ifdef GPIO_LOGGING
+      if (x_axis.position != x || y_axis.position != y || z_axis.position != z) {
+        uint64_t update = _MAX(x_axis.last_update, y_axis.last_update, z_axis.last_update);
+        position_log << update << ", " << x_axis.position << ", " << y_axis.position << ", " << z_axis.position << std::endl;
+        position_log.flush();
+        x = x_axis.position;
+        y = y_axis.position;
+        z = z_axis.position;
+      }
+      // flush the logger
+      logger.flush();
+    #endif
+
+    std::this_thread::yield();
+  }
+}
+
+int main() {
+  std::thread write_serial (write_serial_thread);
+  std::thread read_serial (read_serial_thread);
+
+  #ifdef MYSERIAL0
+    MYSERIAL0.begin(BAUDRATE);
+    SERIAL_ECHOLNPGM("x86_64 Initialized");
+    SERIAL_FLUSHTX();
+  #endif
+
+  Clock::setFrequency(F_CPU);
+  Clock::setTimeMultiplier(1.0); // some testing at 10x
+
+  HAL_timer_init();
+
+  std::thread simulation (simulation_loop);
+
+  DELAY_US(10000);
+
+  setup();
+  for (;;) {
+    loop();
+    std::this_thread::yield();
+  }
+
+  simulation.join();
+  write_serial.join();
+  read_serial.join();
+}
+
+#endif // __PLAT_LINUX__
-- 
cgit v1.2.3