From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit
---
Marlin/src/HAL/STM32F1/fastio.h | 186 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 186 insertions(+)
create mode 100644 Marlin/src/HAL/STM32F1/fastio.h
(limited to 'Marlin/src/HAL/STM32F1/fastio.h')
diff --git a/Marlin/src/HAL/STM32F1/fastio.h b/Marlin/src/HAL/STM32F1/fastio.h
new file mode 100644
index 0000000..e75254d
--- /dev/null
+++ b/Marlin/src/HAL/STM32F1/fastio.h
@@ -0,0 +1,186 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Fast I/O interfaces for STM32F1
+ * These use GPIO functions instead of Direct Port Manipulation, as on AVR.
+ */
+
+#include
+
+#define READ(IO) (PIN_MAP[IO].gpio_device->regs->IDR & _BV32(PIN_MAP[IO].gpio_bit) ? HIGH : LOW)
+#define WRITE(IO,V) (PIN_MAP[IO].gpio_device->regs->BSRR = _BV32(PIN_MAP[IO].gpio_bit) << ((V) ? 0 : 16))
+#define TOGGLE(IO) TBI32(PIN_MAP[IO].gpio_device->regs->ODR, PIN_MAP[IO].gpio_bit)
+
+#define _GET_MODE(IO) gpio_get_mode(PIN_MAP[IO].gpio_device, PIN_MAP[IO].gpio_bit)
+#define _SET_MODE(IO,M) gpio_set_mode(PIN_MAP[IO].gpio_device, PIN_MAP[IO].gpio_bit, M)
+#define _SET_OUTPUT(IO) _SET_MODE(IO, GPIO_OUTPUT_PP)
+#define _SET_OUTPUT_OD(IO) _SET_MODE(IO, GPIO_OUTPUT_OD)
+
+#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+#define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
+
+#define SET_INPUT(IO) _SET_MODE(IO, GPIO_INPUT_FLOATING)
+#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, GPIO_INPUT_PU)
+#define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, GPIO_INPUT_PD)
+#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
+#define SET_PWM(IO) pinMode(IO, PWM) // do{ gpio_set_mode(PIN_MAP[pin].gpio_device, PIN_MAP[pin].gpio_bit, GPIO_AF_OUTPUT_PP); timer_set_mode(PIN_MAP[pin].timer_device, PIN_MAP[pin].timer_channel, TIMER_PWM); }while(0)
+#define SET_PWM_OD(IO) pinMode(IO, PWM_OPEN_DRAIN)
+
+#define IS_INPUT(IO) (_GET_MODE(IO) == GPIO_INPUT_FLOATING || _GET_MODE(IO) == GPIO_INPUT_ANALOG || _GET_MODE(IO) == GPIO_INPUT_PU || _GET_MODE(IO) == GPIO_INPUT_PD)
+#define IS_OUTPUT(IO) (_GET_MODE(IO) == GPIO_OUTPUT_PP || _GET_MODE(IO) == GPIO_OUTPUT_OD)
+
+#define PWM_PIN(IO) !!PIN_MAP[IO].timer_device
+
+// digitalRead/Write wrappers
+#define extDigitalRead(IO) digitalRead(IO)
+#define extDigitalWrite(IO,V) digitalWrite(IO,V)
+
+//
+// Pins Definitions
+//
+#define PA0 0x00
+#define PA1 0x01
+#define PA2 0x02
+#define PA3 0x03
+#define PA4 0x04
+#define PA5 0x05
+#define PA6 0x06
+#define PA7 0x07
+#define PA8 0x08
+#define PA9 0x09
+#define PA10 0x0A
+#define PA11 0x0B
+#define PA12 0x0C
+#define PA13 0x0D
+#define PA14 0x0E
+#define PA15 0x0F
+
+#define PB0 0x10
+#define PB1 0x11
+#define PB2 0x12
+#define PB3 0x13
+#define PB4 0x14
+#define PB5 0x15
+#define PB6 0x16
+#define PB7 0x17 // 36 pins (F103T)
+#define PB8 0x18
+#define PB9 0x19
+#define PB10 0x1A
+#define PB11 0x1B
+#define PB12 0x1C
+#define PB13 0x1D
+#define PB14 0x1E
+#define PB15 0x1F
+
+#if defined(MCU_STM32F103CB) || defined(MCU_STM32F103C8)
+ #define PC13 0x20
+ #define PC14 0x21
+ #define PC15 0x22
+#else
+ #define PC0 0x20
+ #define PC1 0x21
+ #define PC2 0x22
+ #define PC3 0x23
+ #define PC4 0x24
+ #define PC5 0x25
+ #define PC6 0x26
+ #define PC7 0x27
+ #define PC8 0x28
+ #define PC9 0x29
+ #define PC10 0x2A
+ #define PC11 0x2B
+ #define PC12 0x2C
+ #define PC13 0x2D
+ #define PC14 0x2E
+ #define PC15 0x2F
+#endif
+
+#define PD0 0x30
+#define PD1 0x31
+#define PD2 0x32 // 64 pins (F103R)
+#define PD3 0x33
+#define PD4 0x34
+#define PD5 0x35
+#define PD6 0x36
+#define PD7 0x37
+#define PD8 0x38
+#define PD9 0x39
+#define PD10 0x3A
+#define PD11 0x3B
+#define PD12 0x3C
+#define PD13 0x3D
+#define PD14 0x3E
+#define PD15 0x3F
+
+#define PE0 0x40
+#define PE1 0x41
+#define PE2 0x42
+#define PE3 0x43
+#define PE4 0x44
+#define PE5 0x45
+#define PE6 0x46
+#define PE7 0x47
+#define PE8 0x48
+#define PE9 0x49
+#define PE10 0x4A
+#define PE11 0x4B
+#define PE12 0x4C
+#define PE13 0x4D
+#define PE14 0x4E
+#define PE15 0x4F // 100 pins (F103V)
+
+#define PF0 0x50
+#define PF1 0x51
+#define PF2 0x52
+#define PF3 0x53
+#define PF4 0x54
+#define PF5 0x55
+#define PF6 0x56
+#define PF7 0x57
+#define PF8 0x58
+#define PF9 0x59
+#define PF10 0x5A
+#define PF11 0x5B
+#define PF12 0x5C
+#define PF13 0x5D
+#define PF14 0x5E
+#define PF15 0x5F
+
+#define PG0 0x60
+#define PG1 0x61
+#define PG2 0x62
+#define PG3 0x63
+#define PG4 0x64
+#define PG5 0x65
+#define PG6 0x66
+#define PG7 0x67
+#define PG8 0x68
+#define PG9 0x69
+#define PG10 0x6A
+#define PG11 0x6B
+#define PG12 0x6C
+#define PG13 0x6D
+#define PG14 0x6E
+#define PG15 0x6F // 144 pins (F103Z)
--
cgit v1.2.3