From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit
---
Marlin/src/HAL/STM32F1/timers.h | 201 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 201 insertions(+)
create mode 100644 Marlin/src/HAL/STM32F1/timers.h
(limited to 'Marlin/src/HAL/STM32F1/timers.h')
diff --git a/Marlin/src/HAL/STM32F1/timers.h b/Marlin/src/HAL/STM32F1/timers.h
new file mode 100644
index 0000000..3e2e777
--- /dev/null
+++ b/Marlin/src/HAL/STM32F1/timers.h
@@ -0,0 +1,201 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#include
+#include
+#include "../../core/boards.h"
+
+// ------------------------
+// Defines
+// ------------------------
+
+/**
+ * TODO: Check and confirm what timer we will use for each Temps and stepper driving.
+ * We should probable drive temps with PWM.
+ */
+#define FORCE_INLINE __attribute__((always_inline)) inline
+
+typedef uint16_t hal_timer_t;
+#define HAL_TIMER_TYPE_MAX 0xFFFF
+
+#define HAL_TIMER_RATE uint32_t(F_CPU) // frequency of timers peripherals
+
+#ifndef STEP_TIMER_CHAN
+ #define STEP_TIMER_CHAN 1 // Channel of the timer to use for compare and interrupts
+#endif
+#ifndef TEMP_TIMER_CHAN
+ #define TEMP_TIMER_CHAN 1 // Channel of the timer to use for compare and interrupts
+#endif
+
+/**
+ * Note: Timers may be used by platforms and libraries
+ *
+ * FAN PWMs:
+ * With FAN_SOFT_PWM disabled the Temperature class uses
+ * FANx_PIN timers to generate FAN PWM signals.
+ *
+ * Speaker:
+ * When SPEAKER is enabled, one timer is allocated by maple/tone.cpp.
+ * - If BEEPER_PIN has a timer channel (and USE_PIN_TIMER is
+ * defined in tone.cpp) it uses the pin's own timer.
+ * - Otherwise it uses Timer 8 on boards with STM32_HIGH_DENSITY
+ * or Timer 4 on other boards.
+ */
+#ifndef STEP_TIMER_NUM
+ #if defined(MCU_STM32F103CB) || defined(MCU_STM32F103C8)
+ #define STEP_TIMER_NUM 4 // For C8/CB boards, use timer 4
+ #else
+ #define STEP_TIMER_NUM 5 // for other boards, five is fine.
+ #endif
+#endif
+#ifndef PULSE_TIMER_NUM
+ #define PULSE_TIMER_NUM STEP_TIMER_NUM
+#endif
+#ifndef TEMP_TIMER_NUM
+ #define TEMP_TIMER_NUM 2 // Timer Index for Temperature
+ //#define TEMP_TIMER_NUM 4 // 2->4, Timer 2 for Stepper Current PWM
+#endif
+
+#if MB(BTT_SKR_MINI_E3_V1_0, BTT_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE)
+ // SKR Mini E3 boards use PA8 as FAN_PIN, so TIMER 1 is used for Fan PWM.
+ #ifdef STM32_HIGH_DENSITY
+ #define SERVO0_TIMER_NUM 8 // tone.cpp uses Timer 4
+ #else
+ #define SERVO0_TIMER_NUM 3 // tone.cpp uses Timer 8
+ #endif
+#else
+ #define SERVO0_TIMER_NUM 1 // SERVO0 or BLTOUCH
+#endif
+
+#define STEP_TIMER_IRQ_PRIO 2
+#define TEMP_TIMER_IRQ_PRIO 3
+#define SERVO0_TIMER_IRQ_PRIO 1
+
+#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz
+#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
+
+#define STEPPER_TIMER_PRESCALE 18 // prescaler for setting stepper timer, 4Mhz
+#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer
+#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
+
+#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
+#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
+
+timer_dev* get_timer_dev(int number);
+#define TIMER_DEV(num) get_timer_dev(num)
+#define STEP_TIMER_DEV TIMER_DEV(STEP_TIMER_NUM)
+#define TEMP_TIMER_DEV TIMER_DEV(TEMP_TIMER_NUM)
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT() timer_enable_irq(STEP_TIMER_DEV, STEP_TIMER_CHAN)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT() timer_disable_irq(STEP_TIMER_DEV, STEP_TIMER_CHAN)
+#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
+
+#define ENABLE_TEMPERATURE_INTERRUPT() timer_enable_irq(TEMP_TIMER_DEV, TEMP_TIMER_CHAN)
+#define DISABLE_TEMPERATURE_INTERRUPT() timer_disable_irq(TEMP_TIMER_DEV, TEMP_TIMER_CHAN)
+
+#define HAL_timer_get_count(timer_num) timer_get_count(TIMER_DEV(timer_num))
+
+// TODO change this
+
+#ifndef HAL_TEMP_TIMER_ISR
+ #define HAL_TEMP_TIMER_ISR() extern "C" void tempTC_Handler()
+#endif
+#ifndef HAL_STEP_TIMER_ISR
+ #define HAL_STEP_TIMER_ISR() extern "C" void stepTC_Handler()
+#endif
+
+extern "C" {
+ void tempTC_Handler();
+ void stepTC_Handler();
+}
+
+// ------------------------
+// Public Variables
+// ------------------------
+
+//static HardwareTimer StepperTimer(STEP_TIMER_NUM);
+//static HardwareTimer TempTimer(TEMP_TIMER_NUM);
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
+void HAL_timer_enable_interrupt(const uint8_t timer_num);
+void HAL_timer_disable_interrupt(const uint8_t timer_num);
+bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
+
+/**
+ * NOTE: By default libmaple sets ARPE = 1, which means the Auto reload register is preloaded (will only update with an update event)
+ * Thus we have to pause the timer, update the value, refresh, resume the timer.
+ * That seems like a big waste of time and may be better to change the timer config to ARPE = 0, so ARR can be updated any time.
+ * We are using a Channel in each timer in Capture/Compare mode. We could also instead use the Time Update Event Interrupt, but need to disable ARPE
+ * so we can change the ARR value on the fly (without calling refresh), and not get an interrupt right there because we caused an UEV.
+ * This mode pretty much makes 2 timers unusable for PWM since they have their counts updated all the time on ISRs.
+ * The way Marlin manages timer interrupts doesn't make for an efficient usage in STM32F1
+ * Todo: Look at that possibility later.
+ */
+
+FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ // NOTE: WE have set ARPE = 0, which means the Auto reload register is not preloaded
+ // and there is no need to use any compare, as in the timer mode used, setting ARR to the compare value
+ // will result in exactly the same effect, ie trigerring an interrupt, and on top, set counter to 0
+ timer_set_reload(STEP_TIMER_DEV, compare); // We reload direct ARR as needed during counting up
+ break;
+ case TEMP_TIMER_NUM:
+ timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, compare);
+ break;
+ }
+}
+
+FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ // No counter to clear
+ timer_generate_update(STEP_TIMER_DEV);
+ return;
+ case TEMP_TIMER_NUM:
+ timer_set_count(TEMP_TIMER_DEV, 0);
+ timer_generate_update(TEMP_TIMER_DEV);
+ return;
+ }
+}
+
+#define HAL_timer_isr_epilogue(TIMER_NUM)
+
+// No command is available in framework to turn off ARPE bit, which is turned on by default in libmaple.
+// Needed here to reset ARPE=0 for stepper timer
+FORCE_INLINE static void timer_no_ARR_preload_ARPE(timer_dev *dev) {
+ bb_peri_set_bit(&(dev->regs).gen->CR1, TIMER_CR1_ARPE_BIT, 0);
+}
+
+void timer_set_interrupt_priority(uint_fast8_t timer_num, uint_fast8_t priority);
+
+#define TIMER_OC_NO_PRELOAD 0 // Need to disable preload also on compare registers.
--
cgit v1.2.3