From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 Marlin/src/MarlinCore.h | 111 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 Marlin/src/MarlinCore.h

(limited to 'Marlin/src/MarlinCore.h')

diff --git a/Marlin/src/MarlinCore.h b/Marlin/src/MarlinCore.h
new file mode 100644
index 0000000..d43d46b
--- /dev/null
+++ b/Marlin/src/MarlinCore.h
@@ -0,0 +1,111 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "inc/MarlinConfig.h"
+
+#ifdef DEBUG_GCODE_PARSER
+  #include "gcode/parser.h"
+#endif
+
+#include <math.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+void stop();
+
+// Pass true to keep steppers from timing out
+void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep=false));
+inline void idle_no_sleep() { idle(TERN_(ADVANCED_PAUSE_FEATURE, true)); }
+
+#if ENABLED(G38_PROBE_TARGET)
+  extern uint8_t G38_move;          // Flag to tell the ISR that G38 is in progress, and the type
+  extern bool G38_did_trigger;      // Flag from the ISR to indicate the endstop changed
+#endif
+
+/**
+ * The axis order in all axis related arrays is X, Y, Z, E
+ */
+void enable_e_steppers();
+void enable_all_steppers();
+void disable_e_stepper(const uint8_t e);
+void disable_e_steppers();
+void disable_all_steppers();
+
+void kill(PGM_P const lcd_error=nullptr, PGM_P const lcd_component=nullptr, const bool steppers_off=false);
+void minkill(const bool steppers_off=false);
+
+// Global State of the firmware
+enum MarlinState : uint8_t {
+  MF_INITIALIZING =  0,
+  MF_RUNNING      = _BV(0),
+  MF_PAUSED       = _BV(1),
+  MF_WAITING      = _BV(2),
+  MF_STOPPED      = _BV(3),
+  MF_SD_COMPLETE  = _BV(4),
+  MF_KILLED       = _BV(7)
+};
+
+extern MarlinState marlin_state;
+inline bool IsRunning() { return marlin_state == MF_RUNNING; }
+inline bool IsStopped() { return marlin_state != MF_RUNNING; }
+
+bool printingIsActive();
+bool printingIsPaused();
+void startOrResumeJob();
+
+extern bool wait_for_heatup;
+
+#if HAS_RESUME_CONTINUE
+  extern bool wait_for_user;
+  void wait_for_user_response(millis_t ms=0, const bool no_sleep=false);
+#endif
+
+#if ENABLED(PSU_CONTROL)
+  extern bool powersupply_on;
+  #define PSU_PIN_ON()  do{ OUT_WRITE(PS_ON_PIN,  PSU_ACTIVE_STATE); powersupply_on = true;  }while(0)
+  #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_STATE); powersupply_on = false; }while(0)
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define PSU_ON()       powerManager.power_on()
+    #define PSU_OFF()      powerManager.power_off()
+    #define PSU_OFF_SOON() powerManager.power_off_soon()
+  #else
+    #define PSU_ON()     PSU_PIN_ON()
+    #define PSU_OFF()    PSU_PIN_OFF()
+    #define PSU_OFF_SOON PSU_OFF
+  #endif
+#endif
+
+bool pin_is_protected(const pin_t pin);
+
+#if HAS_SUICIDE
+  inline void suicide() { OUT_WRITE(SUICIDE_PIN, SUICIDE_PIN_INVERTING); }
+#endif
+
+#if HAS_KILL
+  #ifndef KILL_PIN_STATE
+    #define KILL_PIN_STATE LOW
+  #endif
+  inline bool kill_state() { return READ(KILL_PIN) == KILL_PIN_STATE; }
+#endif
+
+extern const char M112_KILL_STR[];
-- 
cgit v1.2.3