From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/gcode/config/M217.cpp | 171 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 Marlin/src/gcode/config/M217.cpp (limited to 'Marlin/src/gcode/config/M217.cpp') diff --git a/Marlin/src/gcode/config/M217.cpp b/Marlin/src/gcode/config/M217.cpp new file mode 100644 index 0000000..f2fefb5 --- /dev/null +++ b/Marlin/src/gcode/config/M217.cpp @@ -0,0 +1,171 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../inc/MarlinConfigPre.h" + +#if HAS_MULTI_EXTRUDER + +#include "../gcode.h" +#include "../../module/tool_change.h" + +#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE) + #include "../../module/motion.h" +#endif + +#include "../../MarlinCore.h" // for SP_X_STR, etc. + +void M217_report(const bool eeprom=false) { + + #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) + serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Toolchange:")); + SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length)); + SERIAL_ECHOPAIR_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume), + SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime), + SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed)); + SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed), + " U", LINEAR_UNIT(toolchange_settings.unretract_speed), + " F", toolchange_settings.fan_speed, + " G", toolchange_settings.fan_time); + + #if ENABLED(TOOLCHANGE_MIGRATION_FEATURE) + SERIAL_ECHOPAIR(" A", int(migration.automode)); + SERIAL_ECHOPAIR(" L", LINEAR_UNIT(migration.last)); + #endif + + #if ENABLED(TOOLCHANGE_PARK) + SERIAL_ECHOPAIR(" W", LINEAR_UNIT(toolchange_settings.enable_park)); + SERIAL_ECHOPAIR_P(SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x)); + SERIAL_ECHOPAIR_P(SP_Y_STR, LINEAR_UNIT(toolchange_settings.change_point.y)); + #endif + + #if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED) + SERIAL_ECHOPAIR(" V", LINEAR_UNIT(enable_first_prime)); + #endif + + #else + + UNUSED(eeprom); + + #endif + + SERIAL_ECHOPAIR_P(SP_Z_STR, LINEAR_UNIT(toolchange_settings.z_raise)); + SERIAL_EOL(); +} + +/** + * M217 - Set SINGLENOZZLE toolchange parameters + * + * // Tool change command + * Q Prime active tool and exit + * + * // Tool change settings + * S[linear] Swap length + * B[linear] Extra Swap length + * E[linear] Prime length + * P[linear/m] Prime speed + * R[linear/m] Retract speed + * U[linear/m] UnRetract speed + * V[linear] 0/1 Enable auto prime first extruder used + * W[linear] 0/1 Enable park & Z Raise + * X[linear] Park X (Requires TOOLCHANGE_PARK) + * Y[linear] Park Y (Requires TOOLCHANGE_PARK) + * Z[linear] Z Raise + * F[linear] Fan Speed 0-255 + * G[linear/s] Fan time + * + * Tool migration settings + * A[0|1] Enable auto-migration on runout + * L[index] Last extruder to use for auto-migration + * + * Tool migration command + * T[index] Migrate to next extruder or the given extruder + */ +void GcodeSuite::M217() { + + #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) + + static constexpr float max_extrude = TERN(PREVENT_LENGTHY_EXTRUDE, EXTRUDE_MAXLENGTH, 500); + + if (parser.seen('Q')) { tool_change_prime(); return; } + + if (parser.seenval('S')) { const float v = parser.value_linear_units(); toolchange_settings.swap_length = constrain(v, 0, max_extrude); } + if (parser.seenval('B')) { const float v = parser.value_linear_units(); toolchange_settings.extra_resume = constrain(v, -10, 10); } + if (parser.seenval('E')) { const float v = parser.value_linear_units(); toolchange_settings.extra_prime = constrain(v, 0, max_extrude); } + if (parser.seenval('P')) { const int16_t v = parser.value_linear_units(); toolchange_settings.prime_speed = constrain(v, 10, 5400); } + if (parser.seenval('R')) { const int16_t v = parser.value_linear_units(); toolchange_settings.retract_speed = constrain(v, 10, 5400); } + if (parser.seenval('U')) { const int16_t v = parser.value_linear_units(); toolchange_settings.unretract_speed = constrain(v, 10, 5400); } + #if TOOLCHANGE_FS_FAN >= 0 && HAS_FAN + if (parser.seenval('F')) { const int16_t v = parser.value_linear_units(); toolchange_settings.fan_speed = constrain(v, 0, 255); } + if (parser.seenval('G')) { const int16_t v = parser.value_linear_units(); toolchange_settings.fan_time = constrain(v, 1, 30); } + #endif + #endif + + #if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED) + if (parser.seenval('V')) { enable_first_prime = parser.value_linear_units(); } + #endif + + #if ENABLED(TOOLCHANGE_PARK) + if (parser.seenval('W')) { toolchange_settings.enable_park = parser.value_linear_units(); } + if (parser.seenval('X')) { const int16_t v = parser.value_linear_units(); toolchange_settings.change_point.x = constrain(v, X_MIN_POS, X_MAX_POS); } + if (parser.seenval('Y')) { const int16_t v = parser.value_linear_units(); toolchange_settings.change_point.y = constrain(v, Y_MIN_POS, Y_MAX_POS); } + #endif + + if (parser.seenval('Z')) { toolchange_settings.z_raise = parser.value_linear_units(); } + + #if ENABLED(TOOLCHANGE_MIGRATION_FEATURE) + migration.target = 0; // 0 = disabled + + if (parser.seenval('L')) { // Last + const int16_t lval = parser.value_int(); + if (WITHIN(lval, 0, EXTRUDERS - 1)) { + migration.last = lval; + migration.automode = (active_extruder < migration.last); + } + } + + if (parser.seen('A')) // Auto on/off + migration.automode = parser.value_bool(); + + if (parser.seen('T')) { // Migrate now + if (parser.has_value()) { + const int16_t tval = parser.value_int(); + if (WITHIN(tval, 0, EXTRUDERS - 1) && tval != active_extruder) { + migration.target = tval + 1; + extruder_migration(); + migration.target = 0; // disable + return; + } + else + migration.target = 0; // disable + } + else { + extruder_migration(); + return; + } + } + + #endif + + M217_report(); +} + +#endif // HAS_MULTI_EXTRUDER -- cgit v1.2.3