From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit
---
Marlin/src/gcode/temp/M155.cpp | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Marlin/src/gcode/temp/M155.cpp
(limited to 'Marlin/src/gcode/temp/M155.cpp')
diff --git a/Marlin/src/gcode/temp/M155.cpp b/Marlin/src/gcode/temp/M155.cpp
new file mode 100644
index 0000000..48c2398
--- /dev/null
+++ b/Marlin/src/gcode/temp/M155.cpp
@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if BOTH(AUTO_REPORT_TEMPERATURES, HAS_TEMP_SENSOR)
+
+#include "../gcode.h"
+#include "../../module/temperature.h"
+
+/**
+ * M155: Set temperature auto-report interval. M155 S
+ */
+void GcodeSuite::M155() {
+
+ if (parser.seenval('S'))
+ thermalManager.auto_reporter.set_interval(parser.value_byte());
+
+}
+
+#endif // AUTO_REPORT_TEMPERATURES && HAS_TEMP_SENSOR
--
cgit v1.2.3