From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/gcode/units/G20_G21.cpp | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Marlin/src/gcode/units/G20_G21.cpp (limited to 'Marlin/src/gcode/units/G20_G21.cpp') diff --git a/Marlin/src/gcode/units/G20_G21.cpp b/Marlin/src/gcode/units/G20_G21.cpp new file mode 100644 index 0000000..6f1d5ad --- /dev/null +++ b/Marlin/src/gcode/units/G20_G21.cpp @@ -0,0 +1,39 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../inc/MarlinConfig.h" + +#if ENABLED(INCH_MODE_SUPPORT) + +#include "../gcode.h" + +/** + * G20: Set input mode to inches + */ +void GcodeSuite::G20() { parser.set_input_linear_units(LINEARUNIT_INCH); } + +/** + * G21: Set input mode to millimeters + */ +void GcodeSuite::G21() { parser.set_input_linear_units(LINEARUNIT_MM); } + +#endif // INCH_MODE_SUPPORT -- cgit v1.2.3