From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/inc/Conditionals_LCD.h | 1209 +++++++++++++++++++++++++++++++++++++ 1 file changed, 1209 insertions(+) create mode 100644 Marlin/src/inc/Conditionals_LCD.h (limited to 'Marlin/src/inc/Conditionals_LCD.h') diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h new file mode 100644 index 0000000..712ed39 --- /dev/null +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -0,0 +1,1209 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Conditionals_LCD.h + * Conditionals that need to be set before Configuration_adv.h or pins.h + */ + +// MKS_LCD12864 is a variant of MKS_MINI_12864 +#if ENABLED(MKS_LCD12864) + #define MKS_MINI_12864 +#endif + +/** + * General Flags that may be set below by specific LCDs + * + * DOGLCD : Run a Graphical LCD through U8GLib (with MarlinUI) + * IS_ULTIPANEL : Define LCD_PINS_D5/6/7 for direct-connected "Ultipanel" LCDs + * IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel. + * IS_RRD_SC : Common RRD Smart Controller digital interface pins + * IS_RRD_FG_SC : Common RRD Full Graphical Smart Controller digital interface pins + * U8GLIB_ST7920 : Most common DOGM display SPI interface, supporting a "lightweight" display mode. + * U8GLIB_SH1106 : SH1106 OLED with I2C interface via U8GLib + * IS_U8GLIB_SSD1306 : SSD1306 OLED with I2C interface via U8GLib + * U8GLIB_SSD1309 : SSD1309 OLED with I2C interface via U8GLib + * U8GLIB_ST7565_64128N : ST7565 128x64 LCD with SPI interface via U8GLib + * U8GLIB_LM6059_AF : LM6059 with Hardware SPI via U8GLib + */ +#if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) + + #define MINIPANEL + +#elif ENABLED(CARTESIO_UI) + + #define DOGLCD + #define IS_ULTIPANEL 1 + +#elif EITHER(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE) + + #define IS_DWIN_MARLINUI 1 + #define IS_ULTIPANEL 1 + +#elif ENABLED(ZONESTAR_LCD) + + #define HAS_ADC_BUTTONS 1 + #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + #define ADC_KEY_NUM 8 + #define IS_ULTIPANEL 1 + + // This helps to implement HAS_ADC_BUTTONS menus + #define REVERSE_MENU_DIRECTION + #define ENCODER_PULSES_PER_STEP 1 + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #define ENCODER_FEEDRATE_DEADZONE 2 + +#elif ENABLED(ZONESTAR_12864LCD) + #define DOGLCD + #define IS_RRD_SC 1 + #define U8GLIB_ST7920 + +#elif ENABLED(ZONESTAR_12864OLED) + #define IS_RRD_SC 1 + #define U8GLIB_SH1106 + +#elif ENABLED(ZONESTAR_12864OLED_SSD1306) + #define IS_RRD_SC 1 + #define IS_U8GLIB_SSD1306 + +#elif ENABLED(RADDS_DISPLAY) + #define IS_ULTIPANEL 1 + #define ENCODER_PULSES_PER_STEP 2 + +#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864) + + #define DOGLCD + #define IS_ULTIPANEL 1 + + #if ENABLED(miniVIKI) + #define U8GLIB_ST7565_64128N + #elif ENABLED(VIKI2) + #define U8GLIB_ST7565_64128N + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #define U8GLIB_LM6059_AF + #elif ENABLED(AZSMZ_12864) + #define U8GLIB_ST7565_64128N + #endif + +#elif ENABLED(OLED_PANEL_TINYBOY2) + + #define IS_U8GLIB_SSD1306 + #define IS_ULTIPANEL 1 + +#elif ENABLED(RA_CONTROL_PANEL) + + #define LCD_I2C_TYPE_PCA8574 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define IS_ULTIPANEL 1 + +#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define DOGLCD + #define U8GLIB_ST7920 + #define IS_ULTIPANEL 1 + +#elif ENABLED(MKS_12864OLED) + + #define IS_RRD_SC 1 + #define U8GLIB_SH1106 + +#elif ENABLED(MKS_12864OLED_SSD1306) + + #define IS_RRD_SC 1 + #define IS_U8GLIB_SSD1306 + +#elif ENABLED(FYSETC_242_OLED_12864) + + #define IS_RRD_SC 1 + #define U8GLIB_SH1106 + + #define LED_CONTROL_MENU + #define NEOPIXEL_LED + #undef NEOPIXEL_TYPE + #define NEOPIXEL_TYPE NEO_RGB + #if NEOPIXEL_PIXELS < 3 + #undef NEOPIXELS_PIXELS + #define NEOPIXEL_PIXELS 3 + #endif + #ifndef NEOPIXEL_BRIGHTNESS + #define NEOPIXEL_BRIGHTNESS 127 + #endif + + #if ENABLED(PSU_CONTROL) + #define LED_BACKLIGHT_TIMEOUT 10000 + #endif + +#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1) + + #define FYSETC_MINI_12864 + #define DOGLCD + #define IS_ULTIPANEL 1 + #define LED_COLORS_REDUCE_GREEN + #if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) + #define LED_BACKLIGHT_TIMEOUT 10000 + #endif + + // Require LED backlighting enabled + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #define RGB_LED + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define LED_CONTROL_MENU + #define NEOPIXEL_LED + #undef NEOPIXEL_TYPE + #define NEOPIXEL_TYPE NEO_RGB + #if NEOPIXEL_PIXELS < 3 + #undef NEOPIXELS_PIXELS + #define NEOPIXEL_PIXELS 3 + #endif + #ifndef NEOPIXEL_BRIGHTNESS + #define NEOPIXEL_BRIGHTNESS 127 + #endif + //#define NEOPIXEL_STARTUP_TEST + #endif + +#elif ENABLED(ULTI_CONTROLLER) + + #define IS_ULTIPANEL 1 + #define U8GLIB_SSD1309 + #define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin + #define ENCODER_PULSES_PER_STEP 2 + #define ENCODER_STEPS_PER_MENU_ITEM 2 + +#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) + + #define IS_RRD_SC 1 + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + +#elif EITHER(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C) + + #define IS_TFTGLCD_PANEL 1 + #define IS_ULTIPANEL 1 // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD + + #if ENABLED(SDSUPPORT) && DISABLED(LCD_PROGRESS_BAR) + #define LCD_PROGRESS_BAR + #endif + #if ENABLED(TFTGLCD_PANEL_I2C) + #define LCD_I2C_ADDRESS 0x27 // Must be equal to panel's I2C slave addres + #endif + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD, used for both I2C and SPI buses (LiquidTWI2 not required) + #define STD_ENCODER_PULSES_PER_STEP 2 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 + #define LCD_WIDTH 20 // 20 or 24 chars in line + #define LCD_HEIGHT 10 // Character lines + #define LCD_CONTRAST_MIN 127 + #define LCD_CONTRAST_MAX 255 + #define DEFAULT_LCD_CONTRAST 250 + #define CONVERT_TO_EXT_ASCII // Use extended 128-255 symbols from ASCII table. + // At this time present conversion only for cyrillic - bg, ru and uk languages. + // First 7 ASCII symbols in panel font must be replaced with Marlin's special symbols. + +#elif ENABLED(CR10_STOCKDISPLAY) + + #define IS_RRD_FG_SC 1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + +#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, ANET_FULL_GRAPHICS_LCD_ALT_WIRING, BQ_LCD_SMART_CONTROLLER) + + #define IS_RRD_FG_SC 1 + +#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + + // RepRapDiscount LCD or Graphical LCD with rotary click encoder + #define IS_RRD_SC 1 + +#endif + +// ST7920-based graphical displays +#if ANY(IS_RRD_FG_SC, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER) + #define DOGLCD + #define U8GLIB_ST7920 + #define IS_RRD_SC 1 +#endif + +// ST7565 / 64128N graphical displays +#if EITHER(MAKRPANEL, MINIPANEL) + #define IS_ULTIPANEL 1 + #define DOGLCD + #if ENABLED(MAKRPANEL) + #define U8GLIB_ST7565_64128N + #endif +#endif + +#if ENABLED(IS_U8GLIB_SSD1306) + #define U8GLIB_SSD1306 +#endif + +#if ENABLED(OVERLORD_OLED) + #define IS_ULTIPANEL 1 + #define U8GLIB_SH1106 + /** + * PCA9632 for buzzer and LEDs via i2c + * No auto-inc, red and green leds switched, buzzer + */ + #define PCA9632 + #define PCA9632_NO_AUTO_INC + #define PCA9632_GRN 0x00 + #define PCA9632_RED 0x02 + #define PCA9632_BUZZER + #define PCA9632_BUZZER_DATA { 0x09, 0x02 } + + #define ENCODER_PULSES_PER_STEP 1 // Overlord uses buttons + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + +// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106 +#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106) + #define HAS_U8GLIB_I2C_OLED 1 + #define IS_ULTRA_LCD 1 + #define DOGLCD +#endif + +/** + * SPI Ultipanels + */ + +// Basic Ultipanel-like displays +#if ANY(ULTIMAKERCONTROLLER, IS_RRD_SC, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106) + #define IS_ULTIPANEL 1 +#endif + +// Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h +#if ENABLED(U8GLIB_SH1106_EINSTART) + #define DOGLCD + #define IS_ULTIPANEL 1 +#endif + +// TFT Compatibility +#if ANY(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI) + #define IS_LEGACY_TFT 1 + #define TFT_GENERIC + #warning "Don't forget to update your TFT settings in Configuration.h." +#endif + +#if ANY(FSMC_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_LVGL_UI_FSMC) + #define TFT_INTERFACE_FSMC +#elif ANY(SPI_GRAPHICAL_TFT, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_SPI) + #define TFT_INTERFACE_SPI +#endif + +#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT) + #define TFT_CLASSIC_UI +#elif ANY(TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI) + #define TFT_COLOR_UI +#elif EITHER(TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI) + #define TFT_LVGL_UI +#endif + +// FSMC/SPI TFT Panels (LVGL) +#if ENABLED(TFT_LVGL_UI) + #define HAS_TFT_LVGL_UI 1 + #define SERIAL_RUNTIME_HOOK 1 +#endif + +// FSMC/SPI TFT Panels +#if ENABLED(TFT_CLASSIC_UI) + #define TFT_SCALED_DOGLCD 1 +#endif + +#if TFT_SCALED_DOGLCD + #define DOGLCD + #define IS_ULTIPANEL 1 + #define DELAYED_BACKLIGHT_INIT +#elif HAS_TFT_LVGL_UI + #define DELAYED_BACKLIGHT_INIT +#endif + +// Color UI +#if ENABLED(TFT_COLOR_UI) + #define HAS_GRAPHICAL_TFT 1 + #define IS_ULTIPANEL 1 +#endif + +/** + * I2C Panels + */ + +#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004) + + #define LCD_I2C_TYPE_PCF8575 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + + #if ENABLED(LCD_SAINSMART_I2C_2004) + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif + +#elif ENABLED(LCD_I2C_PANELOLU2) + + // PANELOLU2 LCD with status LEDs, separate encoder and click inputs + + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional) + #define IS_ULTIPANEL 1 + +#elif ENABLED(LCD_I2C_VIKI) + + /** + * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs + * + * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + * Note: The pause/stop/resume LCD button pin should be connected to the Arduino + * BTN_ENC pin (or set BTN_ENC to -1 if not used) + */ + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) + #define IS_ULTIPANEL 1 + + #define ENCODER_FEEDRATE_DEADZONE 4 + + #define STD_ENCODER_PULSES_PER_STEP 1 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 2 + +#elif ENABLED(G3D_PANEL) + + #define STD_ENCODER_PULSES_PER_STEP 2 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 + +#elif ANY(IS_RRD_SC, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2) + + #define STD_ENCODER_PULSES_PER_STEP 4 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 + +#endif + +#ifndef STD_ENCODER_PULSES_PER_STEP + #if ENABLED(TOUCH_SCREEN) + #define STD_ENCODER_PULSES_PER_STEP 2 + #else + #define STD_ENCODER_PULSES_PER_STEP 5 + #endif +#endif +#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 +#endif +#ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP +#endif +#ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM +#endif +#ifndef ENCODER_FEEDRATE_DEADZONE + #define ENCODER_FEEDRATE_DEADZONE 6 +#endif + +// Shift register panels +// --------------------- +// 2 wire Non-latching LCD SR from: +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection +#if ENABLED(FF_INTERFACEBOARD) + #define SR_LCD_3W_NL // Non latching 3 wire shift register + #define IS_ULTIPANEL 1 +#elif ENABLED(SAV_3DLCD) + #define SR_LCD_2W_NL // Non latching 2 wire shift register + #define IS_ULTIPANEL 1 +#elif ENABLED(ULTIPANEL) + #define IS_ULTIPANEL 1 +#endif + +#if EITHER(IS_ULTIPANEL, ULTRA_LCD) + #define IS_ULTRA_LCD 1 +#endif + +#if EITHER(IS_ULTIPANEL, REPRAPWORLD_KEYPAD) + #define IS_NEWPANEL 1 +#endif + +#if EITHER(ZONESTAR_LCD, REPRAPWORLD_KEYPAD) + #define IS_RRW_KEYPAD 1 + #ifndef REPRAPWORLD_KEYPAD_MOVE_STEP + #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 + #endif +#endif + +// Aliases for LCD features +#if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define HAS_DGUS_LCD 1 +#endif + +// Extensible UI serial touch screens. (See src/lcd/extui) +#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON) + #define IS_EXTUI 1 + #define EXTENSIBLE_UI +#endif + +// Aliases for LCD features +#if EITHER(IS_ULTRA_LCD, EXTENSIBLE_UI) + #define HAS_DISPLAY 1 +#endif + +#if IS_ULTRA_LCD + #define HAS_WIRED_LCD 1 + #if ENABLED(DOGLCD) + #define HAS_MARLINUI_U8GLIB 1 + #elif IS_TFTGLCD_PANEL + // Neither DOGM nor HD44780. Fully customized interface. + #elif DISABLED(HAS_GRAPHICAL_TFT) + #define HAS_MARLINUI_HD44780 1 + #endif +#endif + +#if EITHER(HAS_DISPLAY, GLOBAL_STATUS_MESSAGE) + #define HAS_STATUS_MESSAGE 1 +#endif + +#if IS_ULTIPANEL && DISABLED(NO_LCD_MENUS) + #define HAS_LCD_MENU 1 +#endif + +#if HAS_MARLINUI_U8GLIB + #ifndef LCD_PIXEL_WIDTH + #define LCD_PIXEL_WIDTH 128 + #endif + #ifndef LCD_PIXEL_HEIGHT + #define LCD_PIXEL_HEIGHT 64 + #endif +#endif + +/** + * Multi-Material-Unit supported models + */ +#define PRUSA_MMU1 1 +#define PRUSA_MMU2 2 +#define PRUSA_MMU2S 3 +#define SMUFF_EMU_MMU2 12 +#define SMUFF_EMU_MMU2S 13 + +#ifdef MMU_MODEL + #define HAS_MMU 1 + #if MMU_MODEL == PRUSA_MMU1 + #define HAS_PRUSA_MMU1 1 + #elif MMU_MODEL % 10 == PRUSA_MMU2 + #define HAS_PRUSA_MMU2 1 + #elif MMU_MODEL % 10 == PRUSA_MMU2S + #define HAS_PRUSA_MMU2 1 + #define HAS_PRUSA_MMU2S 1 + #endif + #if MMU_MODEL >= SMUFF_EMU_MMU2 + #define HAS_SMUFF 1 + #endif +#endif + +#undef PRUSA_MMU1 +#undef PRUSA_MMU2 +#undef PRUSA_MMU2S +#undef SMUFF_EMU_MMU2 +#undef SMUFF_EMU_MMU2S + +/** + * Extruders have some combination of stepper motors and hotends + * so we separate these concepts into the defines: + * + * EXTRUDERS - Number of Selectable Tools + * HOTENDS - Number of hotends, whether connected or separate + * E_STEPPERS - Number of actual E stepper motors + * E_MANUAL - Number of E steppers for LCD move options + */ + +#if EXTRUDERS == 0 + #undef EXTRUDERS + #define EXTRUDERS 0 + #undef SINGLENOZZLE + #undef SWITCHING_EXTRUDER + #undef SWITCHING_NOZZLE + #undef MIXING_EXTRUDER + #undef HOTEND_IDLE_TIMEOUT +#elif EXTRUDERS > 1 + #define HAS_MULTI_EXTRUDER 1 +#endif + +#if ENABLED(SWITCHING_EXTRUDER) // One stepper for every two EXTRUDERS + #if EXTRUDERS > 4 + #define E_STEPPERS 3 + #elif EXTRUDERS > 2 + #define E_STEPPERS 2 + #else + #define E_STEPPERS 1 + #endif + #if DISABLED(SWITCHING_NOZZLE) + #define HOTENDS E_STEPPERS + #endif +#elif ENABLED(MIXING_EXTRUDER) + #define E_STEPPERS MIXING_STEPPERS + #define E_MANUAL 1 + #if MIXING_STEPPERS == 2 + #define HAS_DUAL_MIXING 1 + #endif +#elif ENABLED(SWITCHING_TOOLHEAD) + #define E_STEPPERS EXTRUDERS + #define E_MANUAL EXTRUDERS +#elif HAS_PRUSA_MMU2 + #define E_STEPPERS 1 +#endif + +// No inactive extruders with SWITCHING_NOZZLE or Průša MMU1 +#if ENABLED(SWITCHING_NOZZLE) || HAS_PRUSA_MMU1 + #undef DISABLE_INACTIVE_EXTRUDER +#endif + +// Průša MMU1, MMU 2.0, MMUS 2.0 and SMUFF force SINGLENOZZLE +#if HAS_MMU + #define SINGLENOZZLE +#endif + +#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER) // One hotend, one thermistor, no XY offset + #undef HOTENDS + #define HOTENDS 1 + #undef HOTEND_OFFSET_X + #undef HOTEND_OFFSET_Y +#endif + +#ifndef HOTENDS + #define HOTENDS EXTRUDERS +#endif +#ifndef E_STEPPERS + #define E_STEPPERS EXTRUDERS +#endif +#ifndef E_MANUAL + #define E_MANUAL EXTRUDERS +#endif + +#if HOTENDS + #define HAS_HOTEND 1 + #ifndef HOTEND_OVERSHOOT + #define HOTEND_OVERSHOOT 15 + #endif + #if HOTENDS > 1 + #define HAS_MULTI_HOTEND 1 + #define HAS_HOTEND_OFFSET 1 + #endif +#else + #undef PID_PARAMS_PER_HOTEND +#endif + +// Helper macros for extruder and hotend arrays +#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++) +#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V) +#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1, v1, v1) +#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V) +#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1, v1, v1) + +#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR) + #define DO_SWITCH_EXTRUDER 1 +#endif + +/** + * Default hotend offsets, if not defined + */ +#if HAS_HOTEND_OFFSET + #ifndef HOTEND_OFFSET_X + #define HOTEND_OFFSET_X { 0 } // X offsets for each extruder + #endif + #ifndef HOTEND_OFFSET_Y + #define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder + #endif + #ifndef HOTEND_OFFSET_Z + #define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder + #endif +#endif + +/** + * DISTINCT_E_FACTORS affects how some E factors are accessed + */ +#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1 + #define DISTINCT_E E_STEPPERS + #define XYZE_N (XYZ + E_STEPPERS) + #define E_INDEX_N(E) (E) + #define E_AXIS_N(E) AxisEnum(E_AXIS + E) + #define UNUSED_E(E) NOOP +#else + #undef DISTINCT_E_FACTORS + #define DISTINCT_E 1 + #define XYZE_N XYZE + #define E_INDEX_N(E) 0 + #define E_AXIS_N(E) E_AXIS + #define UNUSED_E(E) UNUSED(E) +#endif + +#if ENABLED(DWIN_CREALITY_LCD) + #define SERIAL_CATCHALL 0 + #ifndef LCD_SERIAL_PORT + #define LCD_SERIAL_PORT 3 // Creality 4.x board + #endif +#endif + +/** + * The BLTouch Probe emulates a servo probe + * and uses "special" angles for its state. + */ +#if ENABLED(BLTOUCH) + #ifndef Z_PROBE_SERVO_NR + #define Z_PROBE_SERVO_NR 0 + #endif + #undef DEACTIVATE_SERVOS_AFTER_MOVE + + // Always disable probe pin inverting for BLTouch + #undef Z_MIN_PROBE_ENDSTOP_INVERTING + #define Z_MIN_PROBE_ENDSTOP_INVERTING false + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + #undef Z_MIN_ENDSTOP_INVERTING + #define Z_MIN_ENDSTOP_INVERTING false + #endif +#endif + +/** + * Set a flag for a servo probe (or BLTouch) + */ +#ifdef Z_PROBE_SERVO_NR + #define HAS_Z_SERVO_PROBE 1 +#endif +#if ANY(HAS_Z_SERVO_PROBE, SWITCHING_EXTRUDER, SWITCHING_NOZZLE) + #define HAS_SERVO_ANGLES 1 +#endif +#if !HAS_SERVO_ANGLES + #undef EDITABLE_SERVO_ANGLES +#endif + +/** + * Set flags for enabled probes + */ +#if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE) + #define HAS_BED_PROBE 1 +#endif + +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #if NUM_RUNOUT_SENSORS >= 1 + #ifndef FIL_RUNOUT1_STATE + #define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT1_PULLUP + #define FIL_RUNOUT1_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT1_PULLDOWN + #define FIL_RUNOUT1_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif + #if NUM_RUNOUT_SENSORS >= 2 + #ifndef FIL_RUNOUT2_STATE + #define FIL_RUNOUT2_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT2_PULLUP + #define FIL_RUNOUT2_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT2_PULLDOWN + #define FIL_RUNOUT2_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif + #if NUM_RUNOUT_SENSORS >= 3 + #ifndef FIL_RUNOUT3_STATE + #define FIL_RUNOUT3_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT3_PULLUP + #define FIL_RUNOUT3_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT3_PULLDOWN + #define FIL_RUNOUT3_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif + #if NUM_RUNOUT_SENSORS >= 4 + #ifndef FIL_RUNOUT4_STATE + #define FIL_RUNOUT4_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT4_PULLUP + #define FIL_RUNOUT4_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT4_PULLDOWN + #define FIL_RUNOUT4_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif + #if NUM_RUNOUT_SENSORS >= 5 + #ifndef FIL_RUNOUT5_STATE + #define FIL_RUNOUT5_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT5_PULLUP + #define FIL_RUNOUT5_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT5_PULLDOWN + #define FIL_RUNOUT5_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif + #if NUM_RUNOUT_SENSORS >= 6 + #ifndef FIL_RUNOUT6_STATE + #define FIL_RUNOUT6_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT6_PULLUP + #define FIL_RUNOUT6_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT6_PULLDOWN + #define FIL_RUNOUT6_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif + #if NUM_RUNOUT_SENSORS >= 7 + #ifndef FIL_RUNOUT7_STATE + #define FIL_RUNOUT7_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT7_PULLUP + #define FIL_RUNOUT7_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT7_PULLDOWN + #define FIL_RUNOUT7_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif + #if NUM_RUNOUT_SENSORS >= 8 + #ifndef FIL_RUNOUT8_STATE + #define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE + #endif + #ifndef FIL_RUNOUT8_PULLUP + #define FIL_RUNOUT8_PULLUP FIL_RUNOUT_PULLUP + #endif + #ifndef FIL_RUNOUT8_PULLDOWN + #define FIL_RUNOUT8_PULLDOWN FIL_RUNOUT_PULLDOWN + #endif + #endif +#endif // FILAMENT_RUNOUT_SENSOR + +#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) + #undef PROBE_MANUALLY +#endif + +#if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING) + #define PROBE_SELECTED 1 +#endif + +#if HAS_BED_PROBE + #if DISABLED(NOZZLE_AS_PROBE) + #define HAS_PROBE_XY_OFFSET 1 + #endif + #if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + #define HAS_CUSTOM_PROBE_PIN 1 + #endif + #if Z_HOME_DIR < 0 && (!HAS_CUSTOM_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING)) + #define HOMING_Z_WITH_PROBE 1 + #endif + #ifndef Z_PROBE_LOW_POINT + #define Z_PROBE_LOW_POINT -5 + #endif + #if ENABLED(Z_PROBE_ALLEN_KEY) + #define PROBE_TRIGGERED_WHEN_STOWED_TEST 1 // Extra test for Allen Key Probe + #endif + #if MULTIPLE_PROBING > 1 + #if EXTRA_PROBING > 0 + #define TOTAL_PROBING (MULTIPLE_PROBING + EXTRA_PROBING) + #else + #define TOTAL_PROBING MULTIPLE_PROBING + #endif + #endif + #if ENABLED(PREHEAT_BEFORE_PROBING) + #ifndef PROBING_NOZZLE_TEMP + #define PROBING_NOZZLE_TEMP 0 + #endif + #ifndef PROBING_BED_TEMP + #define PROBING_BED_TEMP 0 + #endif + #endif + #if ENABLED(PREHEAT_BEFORE_LEVELING) + #ifndef LEVELING_NOZZLE_TEMP + #define LEVELING_NOZZLE_TEMP 0 + #endif + #ifndef LEVELING_BED_TEMP + #define LEVELING_BED_TEMP 0 + #endif + #endif +#else + // Clear probe pin settings when no probe is selected + #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + #undef USE_PROBE_FOR_Z_HOMING +#endif + +#if Z_HOME_DIR > 0 + #define HOME_Z_FIRST // If homing away from BED do Z first +#endif + +/** + * Set granular options based on the specific type of leveling + */ +#if ENABLED(AUTO_BED_LEVELING_UBL) + #undef LCD_BED_LEVELING + #if ENABLED(DELTA) + #define UBL_SEGMENTED 1 + #endif +#endif +#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT) + #define ABL_PLANAR 1 +#endif +#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) + #define ABL_GRID 1 +#endif +#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT) + #define HAS_ABL_NOT_UBL 1 +#endif +#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING) + #define HAS_MESH 1 +#endif +#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT) + #define NEEDS_THREE_PROBE_POINTS 1 +#endif +#if EITHER(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL) + #define HAS_ABL_OR_UBL 1 + #if DISABLED(PROBE_MANUALLY) + #define HAS_AUTOLEVEL 1 + #endif +#endif +#if EITHER(HAS_ABL_OR_UBL, MESH_BED_LEVELING) + #define HAS_LEVELING 1 + #if DISABLED(AUTO_BED_LEVELING_UBL) + #define PLANNER_LEVELING 1 + #endif +#endif +#if EITHER(HAS_ABL_OR_UBL, Z_MIN_PROBE_REPEATABILITY_TEST) + #define HAS_PROBING_PROCEDURE 1 +#endif +#if !HAS_LEVELING + #undef PROBE_MANUALLY + #undef RESTORE_LEVELING_AFTER_G28 + #undef ENABLE_LEVELING_AFTER_G28 +#endif + +#ifdef GRID_MAX_POINTS_X + #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y)) + #define GRID_LOOP(A,B) LOOP_L_N(A, GRID_MAX_POINTS_X) LOOP_L_N(B, GRID_MAX_POINTS_Y) +#endif + +// Slim menu optimizations +#if ENABLED(SLIM_LCD_MENUS) + #define BOOT_MARLIN_LOGO_SMALL +#endif + +/** + * CoreXY, CoreXZ, and CoreYZ - and their reverse + */ +#if EITHER(COREXY, COREYX) + #define CORE_IS_XY 1 +#endif +#if EITHER(COREXZ, COREZX) + #define CORE_IS_XZ 1 +#endif +#if EITHER(COREYZ, COREZY) + #define CORE_IS_YZ 1 +#endif +#if CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ + #define IS_CORE 1 +#endif +#if IS_CORE + #if CORE_IS_XY + #define CORE_AXIS_1 A_AXIS + #define CORE_AXIS_2 B_AXIS + #define NORMAL_AXIS Z_AXIS + #elif CORE_IS_XZ + #define CORE_AXIS_1 A_AXIS + #define NORMAL_AXIS Y_AXIS + #define CORE_AXIS_2 C_AXIS + #elif CORE_IS_YZ + #define NORMAL_AXIS X_AXIS + #define CORE_AXIS_1 B_AXIS + #define CORE_AXIS_2 C_AXIS + #endif + #define CORESIGN(n) (ANY(COREYX, COREZX, COREZY) ? (-(n)) : (n)) +#elif ENABLED(MARKFORGED_XY) + // Markforged kinematics + #define CORE_AXIS_1 A_AXIS + #define CORE_AXIS_2 B_AXIS + #define NORMAL_AXIS Z_AXIS +#endif + +#if ENABLED(MORGAN_SCARA) + #define IS_SCARA 1 + #define IS_KINEMATIC 1 +#elif ENABLED(DELTA) + #define IS_KINEMATIC 1 +#else + #define IS_CARTESIAN 1 + #if !IS_CORE + #define IS_FULL_CARTESIAN 1 + #endif +#endif + +// This flag indicates some kind of jerk storage is needed +#if EITHER(CLASSIC_JERK, IS_KINEMATIC) + #define HAS_CLASSIC_JERK 1 +#endif + +#if DISABLED(CLASSIC_JERK) + #define HAS_JUNCTION_DEVIATION 1 +#endif + +// E jerk exists with JD disabled (of course) but also when Linear Advance is disabled on Delta/SCARA +#if ENABLED(CLASSIC_JERK) || (IS_KINEMATIC && DISABLED(LIN_ADVANCE)) + #define HAS_CLASSIC_E_JERK 1 +#endif + +#if SERIAL_PORT == -1 || SERIAL_PORT_2 == -1 + #define HAS_USB_SERIAL 1 +#endif +#if SERIAL_PORT_2 == -2 + #define HAS_ETHERNET 1 +#endif + +// Fallback Stepper Driver types that don't depend on Configuration_adv.h +#ifndef X_DRIVER_TYPE + #define X_DRIVER_TYPE A4988 +#endif +#ifndef X2_DRIVER_TYPE + #define X2_DRIVER_TYPE A4988 +#endif +#ifndef Y_DRIVER_TYPE + #define Y_DRIVER_TYPE A4988 +#endif +#ifndef Y2_DRIVER_TYPE + #define Y2_DRIVER_TYPE A4988 +#endif +#ifndef Z_DRIVER_TYPE + #define Z_DRIVER_TYPE A4988 +#endif +#ifndef Z2_DRIVER_TYPE + #define Z2_DRIVER_TYPE A4988 +#endif +#ifndef Z3_DRIVER_TYPE + #define Z3_DRIVER_TYPE A4988 +#endif +#ifndef Z4_DRIVER_TYPE + #define Z4_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 0 + #undef E0_DRIVER_TYPE +#elif !defined(E0_DRIVER_TYPE) + #define E0_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 1 + #undef E1_DRIVER_TYPE +#elif !defined(E1_DRIVER_TYPE) + #define E1_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 2 + #undef E2_DRIVER_TYPE +#elif !defined(E2_DRIVER_TYPE) + #define E2_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 3 + #undef E3_DRIVER_TYPE +#elif !defined(E3_DRIVER_TYPE) + #define E3_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 4 + #undef E4_DRIVER_TYPE +#elif !defined(E4_DRIVER_TYPE) + #define E4_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 5 + #undef E5_DRIVER_TYPE +#elif !defined(E5_DRIVER_TYPE) + #define E5_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 6 + #undef E6_DRIVER_TYPE +#elif !defined(E6_DRIVER_TYPE) + #define E6_DRIVER_TYPE A4988 +#endif +#if E_STEPPERS <= 7 + #undef E7_DRIVER_TYPE +#elif !defined(E7_DRIVER_TYPE) + #define E7_DRIVER_TYPE A4988 +#endif + +// Fallback axis inverting +#ifndef INVERT_X_DIR + #define INVERT_X_DIR false +#endif +#ifndef INVERT_Y_DIR + #define INVERT_Y_DIR false +#endif +#ifndef INVERT_Z_DIR + #define INVERT_Z_DIR false +#endif +#ifndef INVERT_E_DIR + #define INVERT_E_DIR false +#endif + +/** + * This setting is also used by M109 when trying to calculate + * a ballpark safe margin to prevent wait-forever situation. + */ +#ifndef EXTRUDE_MINTEMP + #define EXTRUDE_MINTEMP 170 +#endif + +/** + * TFT Displays + * + * Configure parameters for TFT displays: + * - TFT_DEFAULT_ORIENTATION + * - TFT_DRIVER + * - TFT_WIDTH + * - TFT_HEIGHT + * - TFT_INTERFACE_(SPI|FSMC) + * - TFT_COLOR + * - GRAPHICAL_TFT_UPSCALE + */ +#if ENABLED(MKS_TS35_V2_0) // Most common: ST7796 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY) + #define TFT_RES_480x320 + #define TFT_INTERFACE_SPI +#elif ENABLED(MKS_ROBIN_TFT24) // Most common: ST7789 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) + #define TFT_RES_320x240 + #define TFT_INTERFACE_FSMC +#elif ENABLED(MKS_ROBIN_TFT28) // Most common: ST7789 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) + #define TFT_RES_320x240 + #define TFT_INTERFACE_FSMC +#elif ENABLED(MKS_ROBIN_TFT32) // Most common: ST7789 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) + #define TFT_RES_320x240 + #define TFT_INTERFACE_FSMC +#elif ENABLED(MKS_ROBIN_TFT35) // Most common: ILI9488 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) + #define TFT_RES_480x320 + #define TFT_INTERFACE_FSMC +#elif ENABLED(MKS_ROBIN_TFT43) + #define TFT_DEFAULT_ORIENTATION 0 + #define TFT_DRIVER SSD1963 + #define TFT_RES_480x272 + #define TFT_INTERFACE_FSMC +#elif ENABLED(MKS_ROBIN_TFT_V1_1R) // ILI9328 or R61505 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) + #define TFT_RES_320x240 + #define TFT_INTERFACE_FSMC +#elif EITHER(TFT_TRONXY_X5SA, ANYCUBIC_TFT35) // ILI9488 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) + #define TFT_DRIVER ILI9488 + #define TFT_RES_480x320 + #define TFT_INTERFACE_FSMC +#elif ENABLED(LONGER_LK_TFT28) + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) + #define TFT_RES_320x240 + #define TFT_INTERFACE_FSMC +#elif ENABLED(ANET_ET4_TFT28) // ST7789 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) + #define TFT_RES_320x240 + #define TFT_INTERFACE_FSMC +#elif ENABLED(ANET_ET5_TFT35) // ST7796 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY) + #define TFT_RES_480x320 + #define TFT_INTERFACE_FSMC +#elif ENABLED(TFT_GENERIC) + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) + #if NONE(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320) + #define TFT_RES_320x240 + #endif + #if NONE(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI) + #define TFT_INTERFACE_SPI + #endif +#endif + +#if ENABLED(TFT_RES_320x240) + #define TFT_WIDTH 320 + #define TFT_HEIGHT 240 + #define GRAPHICAL_TFT_UPSCALE 2 +#elif ENABLED(TFT_RES_480x272) + #define TFT_WIDTH 480 + #define TFT_HEIGHT 272 + #define GRAPHICAL_TFT_UPSCALE 2 +#elif ENABLED(TFT_RES_480x320) + #define TFT_WIDTH 480 + #define TFT_HEIGHT 320 + #define GRAPHICAL_TFT_UPSCALE 3 +#endif + +// FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi).h +#if ENABLED(TFT_INTERFACE_FSMC) + #define HAS_FSMC_TFT 1 + #if TFT_SCALED_DOGLCD + #define HAS_FSMC_GRAPHICAL_TFT 1 + #elif HAS_TFT_LVGL_UI + #define HAS_TFT_LVGL_UI_FSMC 1 + #endif +#elif ENABLED(TFT_INTERFACE_SPI) + #define HAS_SPI_TFT 1 + #if TFT_SCALED_DOGLCD + #define HAS_SPI_GRAPHICAL_TFT 1 + #elif HAS_TFT_LVGL_UI + #define HAS_TFT_LVGL_UI_SPI 1 + #endif +#endif + +#if ENABLED(TFT_COLOR_UI) + #if TFT_HEIGHT == 240 + #if ENABLED(TFT_INTERFACE_SPI) + #define TFT_320x240_SPI + #elif ENABLED(TFT_INTERFACE_FSMC) + #define TFT_320x240 + #endif + #elif TFT_HEIGHT == 320 + #if ENABLED(TFT_INTERFACE_SPI) + #define TFT_480x320_SPI + #elif ENABLED(TFT_INTERFACE_FSMC) + #define TFT_480x320 + #endif + #elif TFT_HEIGHT == 272 + #if ENABLED(TFT_INTERFACE_SPI) + #define TFT_480x272_SPI + #elif ENABLED(TFT_INTERFACE_FSMC) + #define TFT_480x272 + #endif + #endif +#endif + +#if EITHER(TFT_320x240, TFT_320x240_SPI) + #define HAS_UI_320x240 1 +#elif EITHER(TFT_480x320, TFT_480x320_SPI) + #define HAS_UI_480x320 1 +#elif EITHER(TFT_480x272, TFT_480x272_SPI) + #define HAS_UI_480x272 1 +#endif +#if ANY(HAS_UI_320x240, HAS_UI_480x320, HAS_UI_480x272) + #define LCD_HEIGHT TERN(TOUCH_SCREEN, 6, 7) // Fewer lines with touch buttons onscreen +#endif + +// This emulated DOGM has 'touch/xpt2046', not 'tft/xpt2046' +#if ENABLED(TOUCH_SCREEN) && !HAS_GRAPHICAL_TFT + #undef TOUCH_SCREEN + #if ENABLED(TFT_CLASSIC_UI) + #define HAS_TOUCH_BUTTONS 1 + #endif +#endif + +// XPT2046_** Compatibility +#if !(defined(TOUCH_CALIBRATION_X) || defined(TOUCH_CALIBRATION_Y) || defined(TOUCH_OFFSET_X) || defined(TOUCH_OFFSET_Y) || defined(TOUCH_ORIENTATION)) + #if defined(XPT2046_X_CALIBRATION) && defined(XPT2046_Y_CALIBRATION) && defined(XPT2046_X_OFFSET) && defined(XPT2046_Y_OFFSET) + #define TOUCH_CALIBRATION_X XPT2046_X_CALIBRATION + #define TOUCH_CALIBRATION_Y XPT2046_Y_CALIBRATION + #define TOUCH_OFFSET_X XPT2046_X_OFFSET + #define TOUCH_OFFSET_Y XPT2046_Y_OFFSET + #define TOUCH_ORIENTATION TOUCH_LANDSCAPE + #endif +#endif -- cgit v1.2.3