From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/lcd/dogm/status_screen_DOGM.cpp | 940 +++++++++++++++++++++++++++++ 1 file changed, 940 insertions(+) create mode 100644 Marlin/src/lcd/dogm/status_screen_DOGM.cpp (limited to 'Marlin/src/lcd/dogm/status_screen_DOGM.cpp') diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp new file mode 100644 index 0000000..8ae6ab6 --- /dev/null +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -0,0 +1,940 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// +// status_screen_DOGM.cpp +// Standard Status Screen for Graphical Display +// + +#include "../../inc/MarlinConfigPre.h" + +#if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI) + +#include "dogm_Statusscreen.h" +#include "marlinui_DOGM.h" +#include "../marlinui.h" +#include "../lcdprint.h" +#include "../../libs/numtostr.h" + +#include "../../module/motion.h" +#include "../../module/temperature.h" + +#include "../../gcode/parser.h" // for units (and volumetric) + +#if ENABLED(LCD_SHOW_E_TOTAL) + #include "../../MarlinCore.h" // for printingIsActive(), marlin_state and MF_SD_COMPLETE +#endif + +#if ENABLED(FILAMENT_LCD_DISPLAY) + #include "../../feature/filwidth.h" + #include "../../module/planner.h" +#endif + +#if HAS_CUTTER + #include "../../feature/spindle_laser.h" +#endif + +#if HAS_POWER_MONITOR + #include "../../feature/power_monitor.h" +#endif + +#if ENABLED(SDSUPPORT) + #include "../../sd/cardreader.h" +#endif + +#if HAS_PRINT_PROGRESS + #include "../../module/printcounter.h" +#endif + +#if HAS_DUAL_MIXING + #include "../../feature/mixing.h" +#endif + +#define X_LABEL_POS 3 +#define X_VALUE_POS 11 +#define XYZ_SPACING 37 + +#define X_LABEL_POS_IN (X_LABEL_POS - 2) +#define X_VALUE_POS_IN (X_VALUE_POS - 5) +#define XYZ_SPACING_IN (XYZ_SPACING + 9) + +#define XYZ_BASELINE (30 + INFO_FONT_ASCENT) +#define EXTRAS_BASELINE (40 + INFO_FONT_ASCENT) +#define STATUS_BASELINE (LCD_PIXEL_HEIGHT - INFO_FONT_DESCENT) + +#if ANIM_HBCC + enum HeatBits : uint8_t { + HEATBIT_HOTEND, + HEATBIT_BED = HOTENDS, + HEATBIT_CHAMBER, + HEATBIT_CUTTER + }; + IF<(HEATBIT_CUTTER > 7), uint16_t, uint8_t>::type heat_bits; +#endif + +#if ANIM_HOTEND + #define HOTEND_ALT(N) TEST(heat_bits, HEATBIT_HOTEND + N) +#else + #define HOTEND_ALT(N) false +#endif +#if ANIM_BED + #define BED_ALT() TEST(heat_bits, HEATBIT_BED) +#else + #define BED_ALT() false +#endif +#if ANIM_CHAMBER + #define CHAMBER_ALT() TEST(heat_bits, HEATBIT_CHAMBER) +#else + #define CHAMBER_ALT() false +#endif +#if ANIM_CUTTER + #define CUTTER_ALT(N) TEST(heat_bits, HEATBIT_CUTTER) +#else + #define CUTTER_ALT() false +#endif + +#if DO_DRAW_HOTENDS + #define MAX_HOTEND_DRAW _MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE))) +#endif + +#if EITHER(DO_DRAW_BED, DO_DRAW_HOTENDS) + #define STATUS_HEATERS_BOT (STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1) +#endif + +#if HAS_POWER_MONITOR + + void display_power_monitor(const uint8_t x, const uint8_t y) { + + lcd_moveto(x, y); + + #if HAS_POWER_MONITOR_WATTS + const bool wflag = power_monitor.power_display_enabled(); + #endif + #if ENABLED(POWER_MONITOR_CURRENT) + const bool iflag = power_monitor.current_display_enabled(); + #endif + #if HAS_POWER_MONITOR_VREF + const bool vflag = power_monitor.voltage_display_enabled(); + #endif + + #if HAS_POWER_MONITOR_WATTS + // Cycle between current, voltage, and power + if (ELAPSED(millis(), power_monitor.display_item_ms)) { + power_monitor.display_item_ms = millis() + 1000UL; + ++power_monitor.display_item; + } + #elif ENABLED(POWER_MONITOR_CURRENT) + power_monitor.display_item = 0; + #elif HAS_POWER_MONITOR_VREF + power_monitor.display_item = 1; + #endif + + // ensure we have the right one selected for display + for (uint8_t i = 0; i < 3; i++) { + #if ENABLED(POWER_MONITOR_CURRENT) + if (power_monitor.display_item == 0 && !iflag) ++power_monitor.display_item; + #endif + #if HAS_POWER_MONITOR_VREF + if (power_monitor.display_item == 1 && !vflag) ++power_monitor.display_item; + #endif + #if HAS_POWER_MONITOR_WATTS + if (power_monitor.display_item == 2 && !wflag) ++power_monitor.display_item; + #endif + if (power_monitor.display_item >= 3) power_monitor.display_item = 0; + } + + switch (power_monitor.display_item) { + #if ENABLED(POWER_MONITOR_CURRENT) // Current + case 0: if (iflag) power_monitor.draw_current(); break; + #endif + #if HAS_POWER_MONITOR_VREF // Voltage + case 1: if (vflag) power_monitor.draw_voltage(); break; + #endif + #if HAS_POWER_MONITOR_WATTS // Power + case 2: if (wflag) power_monitor.draw_power(); break; + #endif + default: break; + } + } +#endif + +#define PROGRESS_BAR_X 54 +#define PROGRESS_BAR_Y (EXTRAS_BASELINE + 1) +#define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X) + +FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) { + const char *str = i16tostr3rj(temp); + const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1; + lcd_put_u8str(tx - len * (INFO_FONT_WIDTH) / 2 + 1, ty, &str[3-len]); + lcd_put_wchar(LCD_STR_DEGREE[0]); +} + +#if DO_DRAW_HOTENDS + + // Draw hotend bitmap with current and target temperatures + FORCE_INLINE void _draw_hotend_status(const heater_id_t heater_id, const bool blink) { + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #endif + + const bool isHeat = HOTEND_ALT(heater_id); + + const uint8_t tx = STATUS_HOTEND_TEXT_X(heater_id); + + const float temp = thermalManager.degHotend(heater_id), + target = thermalManager.degTargetHotend(heater_id); + + #if DISABLED(STATUS_HOTEND_ANIM) + #define STATIC_HOTEND true + #define HOTEND_DOT isHeat + #else + #define STATIC_HOTEND false + #define HOTEND_DOT false + #endif + + #if ANIM_HOTEND && BOTH(STATUS_HOTEND_INVERTED, STATUS_HOTEND_NUMBERLESS) + #define OFF_BMP(N) status_hotend_b_bmp + #define ON_BMP(N) status_hotend_a_bmp + #elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS) + #define OFF_BMP(N) status_hotend_a_bmp + #define ON_BMP(N) status_hotend_b_bmp + #elif BOTH(ANIM_HOTEND, STATUS_HOTEND_INVERTED) + #define OFF_BMP(N) status_hotend##N##_b_bmp + #define ON_BMP(N) status_hotend##N##_a_bmp + #else + #define OFF_BMP(N) status_hotend##N##_a_bmp + #define ON_BMP(N) status_hotend##N##_b_bmp + #endif + + #if STATUS_HOTEND_BITMAPS > 1 + static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6)); + #if ANIM_HOTEND + static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6)); + #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)]) + #else + #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)]) + #endif + #elif ANIM_HOTEND + #define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP()) + #else + #define HOTEND_BITMAP(N,S) status_hotend_a_bmp + #endif + + if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) { + + #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2) + + const float prop = target - 20, + perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0; + uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f); + NOMORE(tall, BAR_TALL); + + #if ANIM_HOTEND + // Draw hotend bitmap, either whole or split by the heating percent + const uint8_t hx = STATUS_HOTEND_X(heater_id), + bw = STATUS_HOTEND_BYTEWIDTH(heater_id); + #if ENABLED(STATUS_HEAT_PERCENT) + if (isHeat && tall <= BAR_TALL) { + const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; + u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(heater_id, false)); + u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(heater_id, true) + ph * bw); + } + else + #endif + u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater_id, isHeat)); + #endif + + } // PAGE_CONTAINS + + if (PAGE_UNDER(7)) { + #if HEATER_IDLE_HANDLER + const bool dodraw = (blink || !thermalManager.heater_idle[heater_id].timed_out); + #else + constexpr bool dodraw = true; + #endif + if (dodraw) _draw_centered_temp(target + 0.5, tx, 7); + } + + if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1)) + _draw_centered_temp(temp + 0.5f, tx, 28); + + if (STATIC_HOTEND && HOTEND_DOT && PAGE_CONTAINS(17, 19)) { + u8g.setColorIndex(0); // set to white on black + u8g.drawBox(tx, 20 - 3, 2, 2); + u8g.setColorIndex(1); // restore black on white + } + + } + +#endif // DO_DRAW_HOTENDS + +#if DO_DRAW_BED + + // Draw bed bitmap with current and target temperatures + FORCE_INLINE void _draw_bed_status(const bool blink) { + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #endif + + const uint8_t tx = STATUS_BED_TEXT_X; + + const float temp = thermalManager.degBed(), + target = thermalManager.degTargetBed(); + + #if ENABLED(STATUS_HEAT_PERCENT) || DISABLED(STATUS_BED_ANIM) + const bool isHeat = BED_ALT(); + #endif + + #if DISABLED(STATUS_BED_ANIM) + #define STATIC_BED true + #define BED_DOT isHeat + #else + #define STATIC_BED false + #define BED_DOT false + #endif + + if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) { + + #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2) + + const float prop = target - 20, + perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0; + uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f); + NOMORE(tall, BAR_TALL); + + // Draw a heating progress bar, if specified + #if ENABLED(STATUS_HEAT_PERCENT) + + if (isHeat) { + const uint8_t bx = STATUS_BED_X + STATUS_BED_WIDTH; + u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT); + if (tall) { + const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; + if (PAGE_OVER(STATUS_HEATERS_Y + ph)) + u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall); + } + } + + #endif + + } // PAGE_CONTAINS + + if (PAGE_UNDER(7)) { + #if HEATER_IDLE_HANDLER + const bool dodraw = (blink || !thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out); + #else + constexpr bool dodraw = true; + #endif + if (dodraw) _draw_centered_temp(target + 0.5, tx, 7); + } + + if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1)) + _draw_centered_temp(temp + 0.5f, tx, 28); + + if (STATIC_BED && BED_DOT && PAGE_CONTAINS(17, 19)) { + u8g.setColorIndex(0); // set to white on black + u8g.drawBox(tx, 20 - 2, 2, 2); + u8g.setColorIndex(1); // restore black on white + } + + } + +#endif // DO_DRAW_BED + +#if DO_DRAW_CHAMBER + + FORCE_INLINE void _draw_chamber_status() { + #if HAS_HEATED_CHAMBER + if (PAGE_UNDER(7)) + _draw_centered_temp(thermalManager.degTargetChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 7); + #endif + + if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1)) + _draw_centered_temp(thermalManager.degChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 28); + } + +#endif // DO_DRAW_CHAMBER + +// +// Before homing, blink '123' <-> '???'. +// Homed but unknown... '123' <-> ' '. +// Homed and known, display constantly. +// +FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) { + const bool is_inch = parser.using_inch_units(); + const AxisEnum a = TERN(LCD_SHOW_E_TOTAL, axis == E_AXIS ? X_AXIS : axis, axis); + const uint8_t offs = a * (is_inch ? XYZ_SPACING_IN : XYZ_SPACING); + lcd_put_wchar((is_inch ? X_LABEL_POS_IN : X_LABEL_POS) + offs, XYZ_BASELINE, axis_codes[axis]); + lcd_moveto((is_inch ? X_VALUE_POS_IN : X_VALUE_POS) + offs, XYZ_BASELINE); + + if (blink) + lcd_put_u8str(value); + else if (axis_should_home(axis)) + while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?'); + else if (NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !axis_is_trusted(axis)) + lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" ")); + else + lcd_put_u8str(value); +} + +/** + * Draw the Status Screen for a 128x64 DOGM (U8glib) display. + * + * Called as needed to update the current display stripe. + * Use the PAGE_CONTAINS macros to avoid pointless draw calls. + */ +void MarlinUI::draw_status_screen() { + constexpr int xystorage = TERN(INCH_MODE_SUPPORT, 8, 5); + static char xstring[TERN(LCD_SHOW_E_TOTAL, 12, xystorage)], ystring[xystorage], zstring[8]; + + #if ENABLED(FILAMENT_LCD_DISPLAY) + static char wstring[5], mstring[4]; + #endif + + #if HAS_PRINT_PROGRESS + #if DISABLED(DOGM_SD_PERCENT) + #define _SD_INFO_X(len) (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH) / 2 - (len) * (MENU_FONT_WIDTH) / 2) + #else + #define _SD_INFO_X(len) (LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH)) + #endif + + #if ENABLED(DOGM_SD_PERCENT) + static char progress_string[5]; + #endif + static uint8_t lastElapsed = 0xFF, lastProgress = 0xFF; + static u8g_uint_t elapsed_x_pos = 0, progress_bar_solid_width = 0; + static char elapsed_string[16]; + #if ENABLED(SHOW_REMAINING_TIME) + static u8g_uint_t estimation_x_pos = 0; + static char estimation_string[10]; + #if BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY) + static u8g_uint_t progress_x_pos = 0; + static uint8_t progress_state = 0; + static bool prev_blink = 0; + #endif + #endif + #endif + + const bool show_e_total = TERN0(LCD_SHOW_E_TOTAL, printingIsActive() || marlin_state == MF_SD_COMPLETE); + + // At the first page, generate new display values + if (first_page) { + #if ANIM_HBCC + uint8_t new_bits = 0; + #if ANIM_HOTEND + HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, HEATBIT_HOTEND + e); + #endif + if (TERN0(ANIM_BED, thermalManager.isHeatingBed())) SBI(new_bits, HEATBIT_BED); + #if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER + if (thermalManager.isHeatingChamber()) SBI(new_bits, HEATBIT_CHAMBER); + #endif + if (TERN0(ANIM_CUTTER, cutter.enabled())) SBI(new_bits, HEATBIT_CUTTER); + heat_bits = new_bits; + #endif + + const xyz_pos_t lpos = current_position.asLogical(); + const bool is_inch = parser.using_inch_units(); + strcpy(zstring, is_inch ? ftostr42_52(LINEAR_UNIT(lpos.z)) : ftostr52sp(lpos.z)); + + if (show_e_total) { + #if ENABLED(LCD_SHOW_E_TOTAL) + const uint8_t escale = e_move_accumulator >= 100000.0f ? 10 : 1; // After 100m switch to cm + sprintf_P(xstring, PSTR("%ld%cm"), uint32_t(_MAX(e_move_accumulator, 0.0f)) / escale, escale == 10 ? 'c' : 'm'); // 1234567mm + #endif + } + else { + strcpy(xstring, is_inch ? ftostr53_63(LINEAR_UNIT(lpos.x)) : ftostr4sign(lpos.x)); + strcpy(ystring, is_inch ? ftostr53_63(LINEAR_UNIT(lpos.y)) : ftostr4sign(lpos.y)); + } + + #if ENABLED(FILAMENT_LCD_DISPLAY) + strcpy(wstring, ftostr12ns(filwidth.measured_mm)); + strcpy(mstring, i16tostr3rj(planner.volumetric_percent(parser.volumetric_enabled))); + #endif + + // Progress / elapsed / estimation updates and string formatting to avoid float math on each LCD draw + #if HAS_PRINT_PROGRESS + const progress_t progress = TERN(HAS_PRINT_PROGRESS_PERMYRIAD, get_progress_permyriad, get_progress_percent)(); + duration_t elapsed = print_job_timer.duration(); + const uint8_t p = progress & 0xFF, ev = elapsed.value & 0xFF; + if (p != lastProgress) { + lastProgress = p; + + progress_bar_solid_width = u8g_uint_t((PROGRESS_BAR_WIDTH - 2) * (progress / (PROGRESS_SCALE)) * 0.01f); + + #if ENABLED(DOGM_SD_PERCENT) + if (progress == 0) { + progress_string[0] = '\0'; + #if ENABLED(SHOW_REMAINING_TIME) + estimation_string[0] = '\0'; + estimation_x_pos = _SD_INFO_X(0); + #endif + } + else + strcpy(progress_string, TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(progress), ui8tostr3rj(progress / (PROGRESS_SCALE)))); + + #if BOTH(SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY) // Tri-state progress display mode + progress_x_pos = _SD_INFO_X(strlen(progress_string) + 1); + #endif + #endif + } + + constexpr bool can_show_days = DISABLED(DOGM_SD_PERCENT) || ENABLED(ROTATE_PROGRESS_DISPLAY); + if (ev != lastElapsed) { + lastElapsed = ev; + const uint8_t len = elapsed.toDigital(elapsed_string, can_show_days && elapsed.value >= 60*60*24L); + elapsed_x_pos = _SD_INFO_X(len); + + #if ENABLED(SHOW_REMAINING_TIME) + if (!(ev & 0x3)) { + uint32_t timeval = (0 + #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME) + + get_remaining_time() + #endif + ); + if (!timeval && progress > 0) timeval = elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress; + if (!timeval) { + estimation_string[0] = '\0'; + estimation_x_pos = _SD_INFO_X(0); + } + else { + duration_t estimation = timeval; + const uint8_t len = estimation.toDigital(estimation_string, can_show_days && estimation.value >= 60*60*24L); + estimation_x_pos = _SD_INFO_X(len + #if !BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY) + + 1 + #endif + ); + } + } + #endif + } + #endif + } + + const bool blink = get_blink(); + + // Status Menu Font + set_font(FONT_STATUSMENU); + + #if DO_DRAW_LOGO + if (PAGE_CONTAINS(STATUS_LOGO_Y, STATUS_LOGO_Y + STATUS_LOGO_HEIGHT - 1)) + u8g.drawBitmapP(STATUS_LOGO_X, STATUS_LOGO_Y, STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT, status_logo_bmp); + #endif + + #if STATUS_HEATERS_WIDTH + // Draw all heaters (and maybe the bed) in one go + if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)) + u8g.drawBitmapP(STATUS_HEATERS_X, STATUS_HEATERS_Y, STATUS_HEATERS_BYTEWIDTH, STATUS_HEATERS_HEIGHT, status_heaters_bmp); + #endif + + #if DO_DRAW_CUTTER && DISABLED(STATUS_COMBINE_HEATERS) + #if ANIM_CUTTER + #define CUTTER_BITMAP(S) ((S) ? status_cutter_on_bmp : status_cutter_bmp) + #else + #define CUTTER_BITMAP(S) status_cutter_bmp + #endif + const uint8_t cuttery = STATUS_CUTTER_Y(CUTTER_ALT()), + cutterh = STATUS_CUTTER_HEIGHT(CUTTER_ALT()); + if (PAGE_CONTAINS(cuttery, cuttery + cutterh - 1)) + u8g.drawBitmapP(STATUS_CUTTER_X, cuttery, STATUS_CUTTER_BYTEWIDTH, cutterh, CUTTER_BITMAP(CUTTER_ALT())); + #endif + + #if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS) + #if ANIM_BED + #define BED_BITMAP(S) ((S) ? status_bed_on_bmp : status_bed_bmp) + #else + #define BED_BITMAP(S) status_bed_bmp + #endif + const uint8_t bedy = STATUS_BED_Y(BED_ALT()), + bedh = STATUS_BED_HEIGHT(BED_ALT()); + if (PAGE_CONTAINS(bedy, bedy + bedh - 1)) + u8g.drawBitmapP(STATUS_BED_X, bedy, STATUS_BED_BYTEWIDTH, bedh, BED_BITMAP(BED_ALT())); + #endif + + #if DO_DRAW_CHAMBER && DISABLED(STATUS_COMBINE_HEATERS) + #if ANIM_CHAMBER + #define CHAMBER_BITMAP(S) ((S) ? status_chamber_on_bmp : status_chamber_bmp) + #else + #define CHAMBER_BITMAP(S) status_chamber_bmp + #endif + const uint8_t chambery = STATUS_CHAMBER_Y(CHAMBER_ALT()), + chamberh = STATUS_CHAMBER_HEIGHT(CHAMBER_ALT()); + if (PAGE_CONTAINS(chambery, chambery + chamberh - 1)) + u8g.drawBitmapP(STATUS_CHAMBER_X, chambery, STATUS_CHAMBER_BYTEWIDTH, chamberh, CHAMBER_BITMAP(CHAMBER_ALT())); + #endif + + #if DO_DRAW_FAN + #if STATUS_FAN_FRAMES > 2 + static bool old_blink; + static uint8_t fan_frame; + if (old_blink != blink) { + old_blink = blink; + if (!thermalManager.fan_speed[0] || ++fan_frame >= STATUS_FAN_FRAMES) fan_frame = 0; + } + #endif + if (PAGE_CONTAINS(STATUS_FAN_Y, STATUS_FAN_Y + STATUS_FAN_HEIGHT - 1)) + u8g.drawBitmapP(STATUS_FAN_X, STATUS_FAN_Y, STATUS_FAN_BYTEWIDTH, STATUS_FAN_HEIGHT, + #if STATUS_FAN_FRAMES > 2 + fan_frame == 1 ? status_fan1_bmp : + fan_frame == 2 ? status_fan2_bmp : + #if STATUS_FAN_FRAMES > 3 + fan_frame == 3 ? status_fan3_bmp : + #endif + #elif STATUS_FAN_FRAMES > 1 + blink && thermalManager.fan_speed[0] ? status_fan1_bmp : + #endif + status_fan0_bmp + ); + #endif + + // + // Temperature Graphics and Info + // + if (PAGE_UNDER(6 + 1 + 12 + 1 + 6 + 1)) { + // Extruders + #if DO_DRAW_HOTENDS + LOOP_L_N(e, MAX_HOTEND_DRAW) + _draw_hotend_status((heater_id_t)e, blink); + #endif + + // Laser / Spindle + #if DO_DRAW_CUTTER + if (cutter.isReady && PAGE_CONTAINS(STATUS_CUTTER_TEXT_Y - INFO_FONT_ASCENT, STATUS_CUTTER_TEXT_Y - 1)) { + #if CUTTER_UNIT_IS(PERCENT) + lcd_put_u8str(STATUS_CUTTER_TEXT_X, STATUS_CUTTER_TEXT_Y, cutter_power2str(cutter.unitPower)); + #elif CUTTER_UNIT_IS(RPM) + lcd_put_u8str(STATUS_CUTTER_TEXT_X - 2, STATUS_CUTTER_TEXT_Y, ftostr51rj(float(cutter.unitPower) / 1000)); + lcd_put_wchar('K'); + #else + lcd_put_u8str(STATUS_CUTTER_TEXT_X, STATUS_CUTTER_TEXT_Y, cutter_power2str(cutter.unitPower)); + #endif + } + #endif + + // Heated Bed + TERN_(DO_DRAW_BED, _draw_bed_status(blink)); + + // Heated Chamber + TERN_(DO_DRAW_CHAMBER, _draw_chamber_status()); + + // Fan, if a bitmap was provided + #if DO_DRAW_FAN + if (PAGE_CONTAINS(STATUS_FAN_TEXT_Y - INFO_FONT_ASCENT, STATUS_FAN_TEXT_Y - 1)) { + char c = '%'; + uint16_t spd = thermalManager.fan_speed[0]; + if (spd) { + #if ENABLED(ADAPTIVE_FAN_SLOWING) + if (!blink && thermalManager.fan_speed_scaler[0] < 128) { + spd = thermalManager.scaledFanSpeed(0, spd); + c = '*'; + } + #endif + lcd_put_u8str(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y, i16tostr3rj(thermalManager.fanPercent(spd))); + lcd_put_wchar(c); + } + } + #endif + } + + #if ENABLED(SDSUPPORT) + // + // SD Card Symbol + // + if (card.isFileOpen() && PAGE_CONTAINS(42, 51)) { + // Upper box + u8g.drawBox(42, 42, 8, 7); // 42-48 (or 41-47) + // Right edge + u8g.drawBox(50, 44, 2, 5); // 44-48 (or 43-47) + // Bottom hollow box + u8g.drawFrame(42, 49, 10, 4); // 49-52 (or 48-51) + // Corner pixel + u8g.drawPixel(50, 43); // 43 (or 42) + } + #endif // SDSUPPORT + + #if HAS_PRINT_PROGRESS + // + // Progress bar frame + // + + if (PAGE_CONTAINS(PROGRESS_BAR_Y, PROGRESS_BAR_Y + 3)) + u8g.drawFrame(PROGRESS_BAR_X, PROGRESS_BAR_Y, PROGRESS_BAR_WIDTH, 4); + + // + // Progress bar solid part + // + + if (PAGE_CONTAINS(PROGRESS_BAR_Y + 1, PROGRESS_BAR_Y + 2)) + u8g.drawBox(PROGRESS_BAR_X + 1, PROGRESS_BAR_Y + 1, progress_bar_solid_width, 2); + + if (PAGE_CONTAINS(EXTRAS_BASELINE - INFO_FONT_ASCENT, EXTRAS_BASELINE - 1)) { + + #if ALL(DOGM_SD_PERCENT, SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY) + + if (prev_blink != blink) { + prev_blink = blink; + if (++progress_state >= 3) progress_state = 0; + } + + if (progress_state == 0) { + if (progress_string[0]) { + lcd_put_u8str(progress_x_pos, EXTRAS_BASELINE, progress_string); + lcd_put_wchar('%'); + } + } + else if (progress_state == 2 && estimation_string[0]) { + lcd_put_u8str_P(PROGRESS_BAR_X, EXTRAS_BASELINE, PSTR("R:")); + lcd_put_u8str(estimation_x_pos, EXTRAS_BASELINE, estimation_string); + } + else if (elapsed_string[0]) { + lcd_put_u8str_P(PROGRESS_BAR_X, EXTRAS_BASELINE, E_LBL); + lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string); + } + + #else // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY + + // + // SD Percent Complete + // + + #if ENABLED(DOGM_SD_PERCENT) + if (progress_string[0]) { + lcd_put_u8str(55, EXTRAS_BASELINE, progress_string); // Percent complete + lcd_put_wchar('%'); + } + #endif + + // + // Elapsed Time + // + + #if ENABLED(SHOW_REMAINING_TIME) + if (blink && estimation_string[0]) { + lcd_put_wchar(estimation_x_pos, EXTRAS_BASELINE, 'R'); + lcd_put_u8str(estimation_string); + } + else + #endif + lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string); + + #endif // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY + } + + #endif // HAS_PRINT_PROGRESS + + // + // XYZ Coordinates + // + + #if EITHER(XYZ_NO_FRAME, XYZ_HOLLOW_FRAME) + #define XYZ_FRAME_TOP 29 + #define XYZ_FRAME_HEIGHT INFO_FONT_ASCENT + 3 + #else + #define XYZ_FRAME_TOP 30 + #define XYZ_FRAME_HEIGHT INFO_FONT_ASCENT + 1 + #endif + + if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) { + + #if DISABLED(XYZ_NO_FRAME) + #if ENABLED(XYZ_HOLLOW_FRAME) + u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40 7: 29-39 + #else + u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 30-39 7: 30-37 + #endif + #endif + + if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_ASCENT - 1), XYZ_BASELINE)) { + + #if NONE(XYZ_NO_FRAME, XYZ_HOLLOW_FRAME) + u8g.setColorIndex(0); // white on black + #endif + + #if HAS_DUAL_MIXING + + // Two-component mix / gradient instead of XY + + char mixer_messages[15]; + PGM_P mix_label; + #if ENABLED(GRADIENT_MIX) + if (mixer.gradient.enabled) { + mixer.update_mix_from_gradient(); + mix_label = PSTR("Gr"); + } + else + #endif + { + mixer.update_mix_from_vtool(); + mix_label = PSTR("Mx"); + } + + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wformat-overflow" + + sprintf_P(mixer_messages, PSTR(S_FMT " %d;%d%% "), mix_label, int(mixer.mix[0]), int(mixer.mix[1])); + lcd_put_u8str(X_LABEL_POS, XYZ_BASELINE, mixer_messages); + + #pragma GCC diagnostic pop + + #else + + if (show_e_total) { + _draw_axis_value(E_AXIS, xstring, true); + lcd_put_u8str_P(PSTR(" ")); + } + else { + _draw_axis_value(X_AXIS, xstring, blink); + _draw_axis_value(Y_AXIS, ystring, blink); + } + + #endif + + _draw_axis_value(Z_AXIS, zstring, blink); + + #if NONE(XYZ_NO_FRAME, XYZ_HOLLOW_FRAME) + u8g.setColorIndex(1); // black on white + #endif + } + } + + // + // Feedrate + // + #define EXTRAS_2_BASELINE (EXTRAS_BASELINE + 3) + + if (PAGE_CONTAINS(EXTRAS_2_BASELINE - INFO_FONT_ASCENT, EXTRAS_2_BASELINE - 1)) { + set_font(FONT_MENU); + lcd_put_wchar(3, EXTRAS_2_BASELINE, LCD_STR_FEEDRATE[0]); + + set_font(FONT_STATUSMENU); + lcd_put_u8str(12, EXTRAS_2_BASELINE, i16tostr3rj(feedrate_percentage)); + lcd_put_wchar('%'); + + // + // Filament sensor display if SD is disabled + // + #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT) + lcd_put_u8str(56, EXTRAS_2_BASELINE, wstring); + lcd_put_u8str(102, EXTRAS_2_BASELINE, mstring); + lcd_put_wchar('%'); + set_font(FONT_MENU); + lcd_put_wchar(47, EXTRAS_2_BASELINE, LCD_STR_FILAM_DIA[0]); // lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA)); + lcd_put_wchar(93, EXTRAS_2_BASELINE, LCD_STR_FILAM_MUL[0]); + #endif + } + + // + // Status line + // + if (PAGE_CONTAINS(STATUS_BASELINE - INFO_FONT_ASCENT, STATUS_BASELINE + INFO_FONT_DESCENT)) { + lcd_moveto(0, STATUS_BASELINE); + + #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT) + // Alternate Status message and Filament display + if (ELAPSED(millis(), next_filament_display)) { + lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA)); + lcd_put_wchar(':'); + lcd_put_u8str(wstring); + lcd_put_u8str_P(PSTR(" " LCD_STR_FILAM_MUL)); + lcd_put_wchar(':'); + lcd_put_u8str(mstring); + lcd_put_wchar('%'); + return; + } + #endif + + draw_status_message(blink); + } +} + +/** + * Draw the Status Message area + */ +void MarlinUI::draw_status_message(const bool blink) { + + // Get the UTF8 character count of the string + uint8_t lcd_width = LCD_WIDTH, pixel_width = LCD_PIXEL_WIDTH, + slen = utf8_strlen(status_message); + + #if HAS_POWER_MONITOR + if (power_monitor.display_enabled()) { + // make room at the end of the status line for the power monitor reading + lcd_width -= 6; + pixel_width -= (MENU_FONT_WIDTH) * 6; + } + #endif + + #if ENABLED(STATUS_MESSAGE_SCROLLING) + + static bool last_blink = false; + + if (slen <= lcd_width) { + // The string fits within the line. Print with no scrolling + lcd_put_u8str(status_message); + while (slen < lcd_width) { lcd_put_wchar(' '); ++slen; } + } + else { + // String is longer than the available space + if (blink != last_blink) { + last_blink = blink; + advance_status_scroll(); + } + + // Get a pointer to the next valid UTF8 character + // and the string remaining length + uint8_t rlen; + const char *stat = status_and_len(rlen); + lcd_put_u8str_max(stat, pixel_width); + + // If the remaining string doesn't completely fill the screen + if (rlen < lcd_width) { + lcd_put_wchar('.'); // Always at 1+ spaces left, draw a dot + uint8_t chars = lcd_width - rlen; // Amount of space left in characters + if (--chars) { // Draw a second dot if there's space + lcd_put_wchar('.'); + if (--chars) { // Print a second copy of the message + lcd_put_u8str_max(status_message, pixel_width - (rlen + 2) * (MENU_FONT_WIDTH)); + lcd_put_wchar(' '); + } + } + } + } + + #else // !STATUS_MESSAGE_SCROLLING + + UNUSED(blink); + + // Just print the string to the LCD + lcd_put_u8str_max(status_message, pixel_width); + + // Fill the rest with spaces + for (; slen < lcd_width; ++slen) lcd_put_wchar(' '); + + #endif // !STATUS_MESSAGE_SCROLLING + + #if HAS_POWER_MONITOR + display_power_monitor(pixel_width + MENU_FONT_WIDTH, STATUS_BASELINE); + #endif +} + +#endif // HAS_MARLINUI_U8GLIB && !LIGHTWEIGHT_UI -- cgit v1.2.3