From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- .../lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp | 485 +++++++++++++++++++++ .../lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.h | 292 +++++++++++++ 2 files changed, 777 insertions(+) create mode 100644 Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp create mode 100644 Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.h (limited to 'Marlin/src/lcd/extui/lib/dgus/hiprecy') diff --git a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp new file mode 100644 index 0000000..536640e --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp @@ -0,0 +1,485 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* DGUS VPs changed by George Fu in 2019 for Marlin */ + +#include "../../../../../inc/MarlinConfigPre.h" + +#if ENABLED(DGUS_LCD_UI_HIPRECY) + +#include "DGUSDisplayDef.h" +#include "../DGUSDisplay.h" +#include "../DGUSScreenHandler.h" + +#include "../../../../../module/temperature.h" +#include "../../../../../module/motion.h" +#include "../../../../../module/planner.h" + +#include "../../../ui_api.h" +#include "../../../../marlinui.h" + +#if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + uint16_t distanceToMove = 10; +#endif + +const uint16_t VPList_Boot[] PROGMEM = { + VP_MARLIN_VERSION, + 0x0000 +}; + +const uint16_t VPList_Main[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded. */ + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS, + #endif + #if HAS_FAN + VP_Fan0_Percentage, VP_FAN0_STATUS, + #endif + VP_XPos, VP_YPos, VP_ZPos, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + VP_PrintProgress_Percentage, + #endif + 0x0000 +}; + +const uint16_t VPList_Temp[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_Status[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded */ + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + #if HAS_FAN + VP_Fan0_Percentage, + #endif + VP_XPos, VP_YPos, VP_ZPos, + VP_Fan0_Percentage, + VP_Feedrate_Percentage, + VP_PrintProgress_Percentage, + 0x0000 +}; + +const uint16_t VPList_Status2[] PROGMEM = { + /* VP_M117, for completeness, but it cannot be auto-uploaded */ + #if HOTENDS >= 1 + VP_Flowrate_E0, + #endif + #if HOTENDS >= 2 + VP_Flowrate_E1, + #endif + VP_PrintProgress_Percentage, + VP_PrintTime, + 0x0000 +}; + +const uint16_t VPList_Preheat[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_ManualMove[] PROGMEM = { + VP_XPos, VP_YPos, VP_ZPos, + 0x0000 +}; + +const uint16_t VPList_ManualExtrude[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + VP_EPos, + 0x0000 +}; + +const uint16_t VPList_FanAndFeedrate[] PROGMEM = { + VP_Feedrate_Percentage, VP_Fan0_Percentage, + 0x0000 +}; + +const uint16_t VPList_SD_FlowRates[] PROGMEM = { + VP_Flowrate_E0, VP_Flowrate_E1, + 0x0000 +}; + +const uint16_t VPList_Filament_heating[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + VP_E0_FILAMENT_LOAD_UNLOAD, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_Filament_load_unload[] PROGMEM = { + #if HOTENDS >= 1 + VP_E0_FILAMENT_LOAD_UNLOAD, + #endif + #if HOTENDS >= 2 + VP_E1_FILAMENT_LOAD_UNLOAD, + #endif + 0x0000 +}; + +const uint16_t VPList_SDFileList[] PROGMEM = { + VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4, + 0x0000 +}; + +const uint16_t VPList_SD_PrintManipulation[] PROGMEM = { + VP_PrintProgress_Percentage, VP_PrintTime, + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + #if HAS_FAN + VP_Fan0_Percentage, + #if FAN_COUNT > 1 + VP_Fan1_Percentage, + #endif + #endif + VP_Flowrate_E0, + 0x0000 +}; + +const uint16_t VPList_SDPrintTune[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HOTENDS >= 2 + VP_T_E1_Is, VP_T_E1_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + VP_Feedrate_Percentage, + #if HAS_FAN + VP_Fan0_Percentage, + #endif + VP_Flowrate_E0, + VP_SD_Print_ProbeOffsetZ, + 0x0000 +}; + +const uint16_t VPList_StepPerMM[] PROGMEM = { + VP_X_STEP_PER_MM, + VP_Y_STEP_PER_MM, + VP_Z_STEP_PER_MM, + #if HOTENDS >= 1 + VP_E0_STEP_PER_MM, + #endif + #if HOTENDS >= 2 + VP_E1_STEP_PER_MM, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDE0[] PROGMEM = { + #if ENABLED(PIDTEMP) + VP_E0_PID_P, + VP_E0_PID_I, + VP_E0_PID_D, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDBED[] PROGMEM = { + #if ENABLED(PIDTEMP) + VP_BED_PID_P, + VP_BED_PID_I, + VP_BED_PID_D, + #endif + 0x0000 +}; + +const uint16_t VPList_Infos[] PROGMEM = { + VP_MARLIN_VERSION, + VP_PrintTime, + #if ENABLED(PRINTCOUNTER) + VP_PrintAccTime, + VP_PrintsTotal, + #endif + 0x0000 +}; + +const uint16_t VPList_PIDTuningWaiting[] PROGMEM = { + VP_WAITING_STATUS, + 0x0000 +}; + +const uint16_t VPList_FLCPreheat[] PROGMEM = { + #if HOTENDS >= 1 + VP_T_E0_Is, VP_T_E0_Set, + #endif + #if HAS_HEATED_BED + VP_T_Bed_Is, VP_T_Bed_Set, + #endif + 0x0000 +}; + +const uint16_t VPList_FLCPrinting[] PROGMEM = { + #if HOTENDS >= 1 + VP_SD_Print_ProbeOffsetZ, + #endif + 0x0000 +}; + +const uint16_t VPList_Z_Offset[] PROGMEM = { + #if HOTENDS >= 1 + VP_SD_Print_ProbeOffsetZ, + #endif + 0x0000 +}; + +const struct VPMapping VPMap[] PROGMEM = { + { DGUSLCD_SCREEN_BOOT, VPList_Boot }, + { DGUSLCD_SCREEN_MAIN, VPList_Main }, + { DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp }, + { DGUSLCD_SCREEN_STATUS, VPList_Status }, + { DGUSLCD_SCREEN_STATUS2, VPList_Status2 }, + { DGUSLCD_SCREEN_PREHEAT, VPList_Preheat }, + { DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove }, + { DGUSLCD_SCREEN_Z_OFFSET, VPList_Z_Offset }, + { DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude }, + { DGUSLCD_SCREEN_FILAMENT_HEATING, VPList_Filament_heating }, + { DGUSLCD_SCREEN_FILAMENT_LOADING, VPList_Filament_load_unload }, + { DGUSLCD_SCREEN_FILAMENT_UNLOADING, VPList_Filament_load_unload }, + { DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation }, + { DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList }, + { DGUSLCD_SCREEN_SDPRINTTUNE, VPList_SDPrintTune }, + { DGUSLCD_SCREEN_WAITING, VPList_PIDTuningWaiting }, + { DGUSLCD_SCREEN_FLC_PREHEAT, VPList_FLCPreheat }, + { DGUSLCD_SCREEN_FLC_PRINTING, VPList_FLCPrinting }, + { DGUSLCD_SCREEN_STEPPERMM, VPList_StepPerMM }, + { DGUSLCD_SCREEN_PID_E, VPList_PIDE0 }, + { DGUSLCD_SCREEN_PID_BED, VPList_PIDBED }, + { DGUSLCD_SCREEN_INFOS, VPList_Infos }, + { 0 , nullptr } // List is terminated with an nullptr as table entry. +}; + +const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION; + +// Helper to define a DGUS_VP_Variable for common use cases. +#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR } + +// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string) +#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \ + .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR } + +const struct DGUS_VP_Variable ListOfVP[] PROGMEM = { + // Helper to detect touch events + VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr), + VPHELPER(VP_SCREENCHANGE_ASK, nullptr, ScreenHandler.ScreenChangeHookIfIdle, nullptr), + #if ENABLED(SDSUPPORT) + VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, ScreenHandler.ScreenChangeHookIfSD, nullptr), + #endif + VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr), + + VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr), + + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr), + #endif + #if ENABLED(DGUS_UI_MOVE_DIS_OPTION) + VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr), + #else + VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr), + VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr), + #endif + VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr), + #if ENABLED(POWER_LOSS_RECOVERY) + VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr), + #endif + VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr), + #if ENABLED(SINGLE_Z_CALIBRATION) + VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr), + #endif + #if ENABLED(FIRST_LAYER_CAL) + VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr), + #endif + + { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplayPGM }, + // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr + { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplay }, + + // Temperature Data + #if HOTENDS >= 1 + VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr), + VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr), + VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(DGUS_PREHEAT_UI) + VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr), + #endif + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload), + #endif + #if ENABLED(PIDTEMP) + VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr), + #endif + #endif + #if HOTENDS >= 2 + VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr), + VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr), + VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay), + #endif + #if HAS_HEATED_BED + VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<0>), + VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay), + VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr), + VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay), + #if ENABLED(PIDTEMP) + VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID), + VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr), + #endif + #endif + + // Fan Data + #if HAS_FAN + #define FAN_VPHELPER(N) \ + VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \ + VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \ + VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay), + REPEAT(FAN_COUNT, FAN_VPHELPER) + #endif + + // Feedrate + VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ), + + // Position Data + VPHELPER(VP_XPos, ¤t_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_YPos, ¤t_position.y, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + VPHELPER(VP_ZPos, ¤t_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>), + + // Print Progress + VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ), + + // Print Time + VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay ), + #if ENABLED(PRINTCOUNTER) + VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay ), + VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay ), + #endif + + VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>), + VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #if HOTENDS >= 1 + VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif + #if HOTENDS >= 2 + VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>), + #endif + + // SDCard File listing. + #if ENABLED(SDSUPPORT) + VPHELPER(VP_SD_ScrollEvent, nullptr, ScreenHandler.DGUSLCD_SD_ScrollFilelist, nullptr), + VPHELPER(VP_SD_FileSelected, nullptr, ScreenHandler.DGUSLCD_SD_FileSelected, nullptr), + VPHELPER(VP_SD_FileSelectConfirm, nullptr, ScreenHandler.DGUSLCD_SD_StartPrint, nullptr), + VPHELPER_STR(VP_SD_FileName0, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName1, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName2, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName3, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename ), + VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, ScreenHandler.DGUSLCD_SD_SendFilename ), + VPHELPER(VP_SD_ResumePauseAbort, nullptr, ScreenHandler.DGUSLCD_SD_ResumePauseAbort, nullptr), + VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr), + VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr), + #if HAS_BED_PROBE + VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>), + #if ENABLED(BABYSTEPPING) + VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr), + #endif + #endif + #endif + + #if ENABLED(DGUS_UI_WAITING) + VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, ScreenHandler.DGUSLCD_SendWaitingStatusToDisplay), + #endif + + // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content. + { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM }, + { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM }, + + VPHELPER(0, 0, 0, 0) // must be last entry. +}; + +#endif // DGUS_LCD_UI_HIPRECY diff --git a/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.h b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.h new file mode 100644 index 0000000..d18989a --- /dev/null +++ b/Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.h @@ -0,0 +1,292 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../DGUSDisplayDef.h" + +enum DGUSLCD_Screens : uint8_t { + DGUSLCD_SCREEN_BOOT = 160, + DGUSLCD_SCREEN_MAIN = 1, + DGUSLCD_SCREEN_STATUS = 1, + DGUSLCD_SCREEN_STATUS2 = 1, + DGUSLCD_SCREEN_POWER_LOSS = 17, + DGUSLCD_SCREEN_TEMPERATURE = 40, + DGUSLCD_SCREEN_MANUALMOVE = 86, + DGUSLCD_SCREEN_PREHEAT = 48, + DGUSLCD_SCREEN_UTILITY = 70, + DGUSLCD_SCREEN_FILAMENT_HEATING = 80, + DGUSLCD_SCREEN_FILAMENT_LOADING = 76, + DGUSLCD_SCREEN_FILAMENT_UNLOADING = 82, + DGUSLCD_SCREEN_MANUALEXTRUDE = 84, + DGUSLCD_SCREEN_Z_OFFSET = 88, + DGUSLCD_SCREEN_SDFILELIST = 3, + DGUSLCD_SCREEN_SDPRINTMANIPULATION = 7, + DGUSLCD_SCREEN_SDPRINTTUNE = 9, + DGUSLCD_SCREEN_FLC_PREHEAT = 94, + DGUSLCD_SCREEN_FLC_PRINTING = 96, + DGUSLCD_SCREEN_STEPPERMM = 122, + DGUSLCD_SCREEN_PID_E = 126, + DGUSLCD_SCREEN_PID_BED = 128, + DGUSLCD_SCREEN_INFOS = 131, + DGUSLCD_SCREEN_CONFIRM = 240, + DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version") + DGUSLCD_SCREEN_WAITING = 251, + DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen" + DGUSLDC_SCREEN_UNUSED = 255 +}; + +// Display Memory layout used (T5UID) +// Except system variables this is arbitrary, just to organize stuff.... + +// 0x0000 .. 0x0FFF -- System variables and reserved by the display +// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version +// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action) +// 0x3000 .. 0x4FFF -- Marlin Data to be displayed +// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused + +// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight, +// so that we can keep variables nicely together in the address space. + +// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out. +constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible +constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible +constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality. +constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd. + +// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup. +constexpr uint16_t VP_MSGSTR1 = 0x1100; +constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it... +constexpr uint16_t VP_MSGSTR2 = 0x1140; +constexpr uint8_t VP_MSGSTR2_LEN = 0x20; +constexpr uint16_t VP_MSGSTR3 = 0x1180; +constexpr uint8_t VP_MSGSTR3_LEN = 0x20; +constexpr uint16_t VP_MSGSTR4 = 0x11C0; +constexpr uint8_t VP_MSGSTR4_LEN = 0x20; + +// Screenchange request for screens that only make sense when printer is idle. +// e.g movement is only allowed if printer is not printing. +// Marlin must confirm by setting the screen manually. +constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000; +constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte. +constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)= +constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card. + +constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen. + +// Buttons on the SD-Card File listing. +constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down +constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected. +constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed) + +constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints +constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog) +constexpr uint16_t VP_SD_Print_Setting = 0x2040; +constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up + +// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values +// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support) +// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us +// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm. +constexpr uint16_t VP_MOVE_X = 0x2100; +constexpr uint16_t VP_MOVE_Y = 0x2102; +constexpr uint16_t VP_MOVE_Z = 0x2104; +constexpr uint16_t VP_MOVE_E0 = 0x2110; +constexpr uint16_t VP_MOVE_E1 = 0x2112; +//constexpr uint16_t VP_MOVE_E2 = 0x2114; +//constexpr uint16_t VP_MOVE_E3 = 0x2116; +//constexpr uint16_t VP_MOVE_E4 = 0x2118; +//constexpr uint16_t VP_MOVE_E5 = 0x211A; +constexpr uint16_t VP_HOME_ALL = 0x2120; +constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130; + +// Power loss recovery +constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180; + +// Fan Control Buttons , switch between "off" and "on" +constexpr uint16_t VP_FAN0_CONTROL = 0x2200; +constexpr uint16_t VP_FAN1_CONTROL = 0x2202; +//constexpr uint16_t VP_FAN2_CONTROL = 0x2204; +//constexpr uint16_t VP_FAN3_CONTROL = 0x2206; + +// Heater Control Buttons , triged between "cool down" and "heat PLA" state +constexpr uint16_t VP_E0_CONTROL = 0x2210; +constexpr uint16_t VP_E1_CONTROL = 0x2212; +//constexpr uint16_t VP_E2_CONTROL = 0x2214; +//constexpr uint16_t VP_E3_CONTROL = 0x2216; +//constexpr uint16_t VP_E4_CONTROL = 0x2218; +//constexpr uint16_t VP_E5_CONTROL = 0x221A; +constexpr uint16_t VP_BED_CONTROL = 0x221C; + +// Preheat +constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220; +//constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222; +//constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224; +//constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226; +//constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228; +//constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A; + +// Filament load and unload +constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300; + +// Settings store , reset +constexpr uint16_t VP_SETTINGS = 0x2400; + +// PID autotune +constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410; +//constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412; +//constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414; +//constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416; +//constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418; +//constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A; +constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420; + +// Calibrate Z +constexpr uint16_t VP_Z_CALIBRATE = 0x2430; + +// First layer cal +constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded + +// Firmware version on the boot screen. +constexpr uint16_t VP_MARLIN_VERSION = 0x3000; +constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed. + +// Place for status messages. +constexpr uint16_t VP_M117 = 0x3020; +constexpr uint8_t VP_M117_LEN = 0x20; + +// Temperatures. +constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer +constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer +constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer + +// reserved to support up to 6 Extruders: +//constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer +//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer +//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer +//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer +//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer +//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer +//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer +//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer +//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer + +constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer +constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer + +constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer +constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer + +// reserved for up to 6 Extruders: +//constexpr uint16_t VP_Flowrate_E2 = 0x3094; +//constexpr uint16_t VP_Flowrate_E3 = 0x3096; +//constexpr uint16_t VP_Flowrate_E4 = 0x3098; +//constexpr uint16_t VP_Flowrate_E5 = 0x309A; + +constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100) +constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100) + +// Actual Position +constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy +constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy + +constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy + +constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100) + +constexpr uint16_t VP_PrintTime = 0x3140; +constexpr uint16_t VP_PrintTime_LEN = 32; + +constexpr uint16_t VP_PrintAccTime = 0x3160; +constexpr uint16_t VP_PrintAccTime_LEN = 32; + +constexpr uint16_t VP_PrintsTotal = 0x3180; +constexpr uint16_t VP_PrintsTotal_LEN = 16; + +// SDCard File Listing +constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries. +constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there. +constexpr uint16_t VP_SD_FileName0 = 0x3200; +constexpr uint16_t VP_SD_FileName1 = 0x3220; +constexpr uint16_t VP_SD_FileName2 = 0x3240; +constexpr uint16_t VP_SD_FileName3 = 0x3260; +constexpr uint16_t VP_SD_FileName4 = 0x3280; + +constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; // + +constexpr uint16_t VP_SD_Print_Filename = 0x32C0; // +// Fan status +constexpr uint16_t VP_FAN0_STATUS = 0x3300; +constexpr uint16_t VP_FAN1_STATUS = 0x3302; +//constexpr uint16_t VP_FAN2_STATUS = 0x3304; +//constexpr uint16_t VP_FAN3_STATUS = 0x3306; + +// Heater status +constexpr uint16_t VP_E0_STATUS = 0x3310; +//constexpr uint16_t VP_E1_STATUS = 0x3312; +//constexpr uint16_t VP_E2_STATUS = 0x3314; +//constexpr uint16_t VP_E3_STATUS = 0x3316; +//constexpr uint16_t VP_E4_STATUS = 0x3318; +//constexpr uint16_t VP_E5_STATUS = 0x331A; +constexpr uint16_t VP_BED_STATUS = 0x331C; + +constexpr uint16_t VP_MOVE_OPTION = 0x3400; + +// Step per mm +constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4 +//constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602; +constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604; +//constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606; +constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608; +//constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A; +constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610; +//constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612; +//constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614; +//constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616; +//constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618; +//constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A; + +// PIDs +constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4 +constexpr uint16_t VP_E0_PID_I = 0x3702; +constexpr uint16_t VP_E0_PID_D = 0x3704; +constexpr uint16_t VP_BED_PID_P = 0x3710; +constexpr uint16_t VP_BED_PID_I = 0x3712; +constexpr uint16_t VP_BED_PID_D = 0x3714; + +// Wating screen status +constexpr uint16_t VP_WAITING_STATUS = 0x3800; + +// SPs for certain variables... +// located at 0x5000 and up +// Not used yet! +// This can be used e.g to make controls / data display invisible +constexpr uint16_t SP_T_E0_Is = 0x5000; +constexpr uint16_t SP_T_E0_Set = 0x5010; +constexpr uint16_t SP_T_E1_Is = 0x5020; +constexpr uint16_t SP_T_Bed_Is = 0x5030; +constexpr uint16_t SP_T_Bed_Set = 0x5040; -- cgit v1.2.3