From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/module/temperature.h | 885 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 885 insertions(+) create mode 100644 Marlin/src/module/temperature.h (limited to 'Marlin/src/module/temperature.h') diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h new file mode 100644 index 0000000..002e1cb --- /dev/null +++ b/Marlin/src/module/temperature.h @@ -0,0 +1,885 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * temperature.h - temperature controller + */ + +#include "thermistor/thermistors.h" + +#include "../inc/MarlinConfig.h" + +#if ENABLED(AUTO_POWER_CONTROL) + #include "../feature/power.h" +#endif + +#if ENABLED(AUTO_REPORT_TEMPERATURES) + #include "../libs/autoreport.h" +#endif + +#ifndef SOFT_PWM_SCALE + #define SOFT_PWM_SCALE 0 +#endif + +#define HOTEND_INDEX TERN(HAS_MULTI_HOTEND, e, 0) +#define E_NAME TERN_(HAS_MULTI_HOTEND, e) + +// Heater identifiers. Positive values are hotends. Negative values are other heaters. +typedef enum : int8_t { + INDEX_NONE = -5, + H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED, + H_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7 +} heater_id_t; + +// PID storage +typedef struct { float Kp, Ki, Kd; } PID_t; +typedef struct { float Kp, Ki, Kd, Kc; } PIDC_t; +typedef struct { float Kp, Ki, Kd, Kf; } PIDF_t; +typedef struct { float Kp, Ki, Kd, Kc, Kf; } PIDCF_t; + +typedef + #if BOTH(PID_EXTRUSION_SCALING, PID_FAN_SCALING) + PIDCF_t + #elif ENABLED(PID_EXTRUSION_SCALING) + PIDC_t + #elif ENABLED(PID_FAN_SCALING) + PIDF_t + #else + PID_t + #endif +hotend_pid_t; + +#if ENABLED(PID_EXTRUSION_SCALING) + typedef IF<(LPQ_MAX_LEN > 255), uint16_t, uint8_t>::type lpq_ptr_t; +#endif + +#define PID_PARAM(F,H) _PID_##F(TERN(PID_PARAMS_PER_HOTEND, H, 0 & H)) // Always use 'H' to suppress warning +#define _PID_Kp(H) TERN(PIDTEMP, Temperature::temp_hotend[H].pid.Kp, NAN) +#define _PID_Ki(H) TERN(PIDTEMP, Temperature::temp_hotend[H].pid.Ki, NAN) +#define _PID_Kd(H) TERN(PIDTEMP, Temperature::temp_hotend[H].pid.Kd, NAN) +#if ENABLED(PIDTEMP) + #define _PID_Kc(H) TERN(PID_EXTRUSION_SCALING, Temperature::temp_hotend[H].pid.Kc, 1) + #define _PID_Kf(H) TERN(PID_FAN_SCALING, Temperature::temp_hotend[H].pid.Kf, 0) +#else + #define _PID_Kc(H) 1 + #define _PID_Kf(H) 0 +#endif + +/** + * States for ADC reading in the ISR + */ +enum ADCSensorState : char { + StartSampling, + #if HAS_TEMP_ADC_0 + PrepareTemp_0, MeasureTemp_0, + #endif + #if HAS_TEMP_ADC_BED + PrepareTemp_BED, MeasureTemp_BED, + #endif + #if HAS_TEMP_ADC_CHAMBER + PrepareTemp_CHAMBER, MeasureTemp_CHAMBER, + #endif + #if HAS_TEMP_ADC_PROBE + PrepareTemp_PROBE, MeasureTemp_PROBE, + #endif + #if HAS_TEMP_ADC_1 + PrepareTemp_1, MeasureTemp_1, + #endif + #if HAS_TEMP_ADC_2 + PrepareTemp_2, MeasureTemp_2, + #endif + #if HAS_TEMP_ADC_3 + PrepareTemp_3, MeasureTemp_3, + #endif + #if HAS_TEMP_ADC_4 + PrepareTemp_4, MeasureTemp_4, + #endif + #if HAS_TEMP_ADC_5 + PrepareTemp_5, MeasureTemp_5, + #endif + #if HAS_TEMP_ADC_6 + PrepareTemp_6, MeasureTemp_6, + #endif + #if HAS_TEMP_ADC_7 + PrepareTemp_7, MeasureTemp_7, + #endif + #if HAS_JOY_ADC_X + PrepareJoy_X, MeasureJoy_X, + #endif + #if HAS_JOY_ADC_Y + PrepareJoy_Y, MeasureJoy_Y, + #endif + #if HAS_JOY_ADC_Z + PrepareJoy_Z, MeasureJoy_Z, + #endif + #if ENABLED(FILAMENT_WIDTH_SENSOR) + Prepare_FILWIDTH, Measure_FILWIDTH, + #endif + #if ENABLED(POWER_MONITOR_CURRENT) + Prepare_POWER_MONITOR_CURRENT, + Measure_POWER_MONITOR_CURRENT, + #endif + #if ENABLED(POWER_MONITOR_VOLTAGE) + Prepare_POWER_MONITOR_VOLTAGE, + Measure_POWER_MONITOR_VOLTAGE, + #endif + #if HAS_ADC_BUTTONS + Prepare_ADC_KEY, Measure_ADC_KEY, + #endif + SensorsReady, // Temperatures ready. Delay the next round of readings to let ADC pins settle. + StartupDelay // Startup, delay initial temp reading a tiny bit so the hardware can settle +}; + +// Minimum number of Temperature::ISR loops between sensor readings. +// Multiplied by 16 (OVERSAMPLENR) to obtain the total time to +// get all oversampled sensor readings +#define MIN_ADC_ISR_LOOPS 10 + +#define ACTUAL_ADC_SAMPLES _MAX(int(MIN_ADC_ISR_LOOPS), int(SensorsReady)) + +#if HAS_PID_HEATING + #define PID_K2 (1-float(PID_K1)) + #define PID_dT ((OVERSAMPLENR * float(ACTUAL_ADC_SAMPLES)) / TEMP_TIMER_FREQUENCY) + + // Apply the scale factors to the PID values + #define scalePID_i(i) ( float(i) * PID_dT ) + #define unscalePID_i(i) ( float(i) / PID_dT ) + #define scalePID_d(d) ( float(d) / PID_dT ) + #define unscalePID_d(d) ( float(d) * PID_dT ) +#endif + +#if BOTH(HAS_LCD_MENU, G26_MESH_VALIDATION) + #define G26_CLICK_CAN_CANCEL 1 +#endif + +// A temperature sensor +typedef struct TempInfo { + uint16_t acc; + int16_t raw; + float celsius; + inline void reset() { acc = 0; } + inline void sample(const uint16_t s) { acc += s; } + inline void update() { raw = acc; } +} temp_info_t; + +// A PWM heater with temperature sensor +typedef struct HeaterInfo : public TempInfo { + int16_t target; + uint8_t soft_pwm_amount; +} heater_info_t; + +// A heater with PID stabilization +template +struct PIDHeaterInfo : public HeaterInfo { + T pid; // Initialized by settings.load() +}; + +#if ENABLED(PIDTEMP) + typedef struct PIDHeaterInfo hotend_info_t; +#else + typedef heater_info_t hotend_info_t; +#endif +#if HAS_HEATED_BED + #if ENABLED(PIDTEMPBED) + typedef struct PIDHeaterInfo bed_info_t; + #else + typedef heater_info_t bed_info_t; + #endif +#endif +#if HAS_TEMP_PROBE + typedef temp_info_t probe_info_t; +#endif +#if HAS_HEATED_CHAMBER + typedef heater_info_t chamber_info_t; +#elif HAS_TEMP_CHAMBER + typedef temp_info_t chamber_info_t; +#endif + +// Heater watch handling +template +struct HeaterWatch { + uint16_t target; + millis_t next_ms; + inline bool elapsed(const millis_t &ms) { return next_ms && ELAPSED(ms, next_ms); } + inline bool elapsed() { return elapsed(millis()); } + + inline void restart(const int16_t curr, const int16_t tgt) { + if (tgt) { + const int16_t newtarget = curr + INCREASE; + if (newtarget < tgt - HYSTERESIS - 1) { + target = newtarget; + next_ms = millis() + SEC_TO_MS(PERIOD); + return; + } + } + next_ms = 0; + } +}; + +#if WATCH_HOTENDS + typedef struct HeaterWatch hotend_watch_t; +#endif +#if WATCH_BED + typedef struct HeaterWatch bed_watch_t; +#endif +#if WATCH_CHAMBER + typedef struct HeaterWatch chamber_watch_t; +#endif + +// Temperature sensor read value ranges +typedef struct { int16_t raw_min, raw_max; } raw_range_t; +typedef struct { int16_t mintemp, maxtemp; } celsius_range_t; +typedef struct { int16_t raw_min, raw_max, mintemp, maxtemp; } temp_range_t; + +#define THERMISTOR_ABS_ZERO_C -273.15f // bbbbrrrrr cold ! +#define THERMISTOR_RESISTANCE_NOMINAL_C 25.0f // mmmmm comfortable + +#if HAS_USER_THERMISTORS + + enum CustomThermistorIndex : uint8_t { + #if HEATER_0_USER_THERMISTOR + CTI_HOTEND_0, + #endif + #if HEATER_1_USER_THERMISTOR + CTI_HOTEND_1, + #endif + #if HEATER_2_USER_THERMISTOR + CTI_HOTEND_2, + #endif + #if HEATER_3_USER_THERMISTOR + CTI_HOTEND_3, + #endif + #if HEATER_4_USER_THERMISTOR + CTI_HOTEND_4, + #endif + #if HEATER_5_USER_THERMISTOR + CTI_HOTEND_5, + #endif + #if HEATER_BED_USER_THERMISTOR + CTI_BED, + #endif + #if HEATER_PROBE_USER_THERMISTOR + CTI_PROBE, + #endif + #if HEATER_CHAMBER_USER_THERMISTOR + CTI_CHAMBER, + #endif + USER_THERMISTORS + }; + + // User-defined thermistor + typedef struct { + bool pre_calc; // true if pre-calculations update needed + float sh_c_coeff, // Steinhart-Hart C coefficient .. defaults to '0.0' + sh_alpha, + series_res, + res_25, res_25_recip, + res_25_log, + beta, beta_recip; + } user_thermistor_t; + +#endif + +class Temperature { + + public: + + #if HAS_HOTEND + #define HOTEND_TEMPS (HOTENDS + ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)) + static hotend_info_t temp_hotend[HOTEND_TEMPS]; + static const uint16_t heater_maxtemp[HOTENDS]; + #endif + TERN_(HAS_HEATED_BED, static bed_info_t temp_bed); + TERN_(HAS_TEMP_PROBE, static probe_info_t temp_probe); + TERN_(HAS_TEMP_CHAMBER, static chamber_info_t temp_chamber); + + TERN_(AUTO_POWER_E_FANS, static uint8_t autofan_speed[HOTENDS]); + TERN_(AUTO_POWER_CHAMBER_FAN, static uint8_t chamberfan_speed); + + #if ENABLED(FAN_SOFT_PWM) + static uint8_t soft_pwm_amount_fan[FAN_COUNT], + soft_pwm_count_fan[FAN_COUNT]; + #endif + + #if ENABLED(PREVENT_COLD_EXTRUSION) + static bool allow_cold_extrude; + static int16_t extrude_min_temp; + FORCE_INLINE static bool tooCold(const int16_t temp) { return allow_cold_extrude ? false : temp < extrude_min_temp - (TEMP_WINDOW); } + FORCE_INLINE static bool tooColdToExtrude(const uint8_t E_NAME) { + return tooCold(degHotend(HOTEND_INDEX)); + } + FORCE_INLINE static bool targetTooColdToExtrude(const uint8_t E_NAME) { + return tooCold(degTargetHotend(HOTEND_INDEX)); + } + #else + FORCE_INLINE static bool tooColdToExtrude(const uint8_t) { return false; } + FORCE_INLINE static bool targetTooColdToExtrude(const uint8_t) { return false; } + #endif + + FORCE_INLINE static bool hotEnoughToExtrude(const uint8_t e) { return !tooColdToExtrude(e); } + FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); } + + #if ENABLED(SINGLENOZZLE_STANDBY_FAN) + static uint16_t singlenozzle_temp[EXTRUDERS]; + #if HAS_FAN + static uint8_t singlenozzle_fan_speed[EXTRUDERS]; + #endif + static void singlenozzle_change(const uint8_t old_tool, const uint8_t new_tool); + #endif + + #if HEATER_IDLE_HANDLER + + // Heater idle handling. Marlin creates one per hotend and one for the heated bed. + typedef struct { + millis_t timeout_ms; + bool timed_out; + inline void update(const millis_t &ms) { if (!timed_out && timeout_ms && ELAPSED(ms, timeout_ms)) timed_out = true; } + inline void start(const millis_t &ms) { timeout_ms = millis() + ms; timed_out = false; } + inline void reset() { timeout_ms = 0; timed_out = false; } + inline void expire() { start(0); } + } heater_idle_t; + + // Indices and size for the heater_idle array + #define _ENUM_FOR_E(N) IDLE_INDEX_E##N, + enum IdleIndex : uint8_t { + REPEAT(HOTENDS, _ENUM_FOR_E) + #if ENABLED(HAS_HEATED_BED) + IDLE_INDEX_BED, + #endif + NR_HEATER_IDLE + }; + #undef _ENUM_FOR_E + + // Convert the given heater_id_t to idle array index + static inline IdleIndex idle_index_for_id(const int8_t heater_id) { + #if HAS_HEATED_BED + if (heater_id == H_BED) return IDLE_INDEX_BED; + #endif + return (IdleIndex)_MAX(heater_id, 0); + } + + static heater_idle_t heater_idle[NR_HEATER_IDLE]; + + #endif + + private: + + TERN_(EARLY_WATCHDOG, static bool inited); // If temperature controller is running + + static volatile bool raw_temps_ready; + + TERN_(WATCH_HOTENDS, static hotend_watch_t watch_hotend[HOTENDS]); + + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + static uint16_t redundant_temperature_raw; + static float redundant_temperature; + #endif + + #if ENABLED(PID_EXTRUSION_SCALING) + static int32_t last_e_position, lpq[LPQ_MAX_LEN]; + static lpq_ptr_t lpq_ptr; + #endif + + TERN_(HAS_HOTEND, static temp_range_t temp_range[HOTENDS]); + + #if HAS_HEATED_BED + TERN_(WATCH_BED, static bed_watch_t watch_bed); + IF_DISABLED(PIDTEMPBED, static millis_t next_bed_check_ms); + #ifdef BED_MINTEMP + static int16_t mintemp_raw_BED; + #endif + #ifdef BED_MAXTEMP + static int16_t maxtemp_raw_BED; + #endif + #endif + + #if HAS_HEATED_CHAMBER + TERN_(WATCH_CHAMBER, static chamber_watch_t watch_chamber); + static millis_t next_chamber_check_ms; + #ifdef CHAMBER_MINTEMP + static int16_t mintemp_raw_CHAMBER; + #endif + #ifdef CHAMBER_MAXTEMP + static int16_t maxtemp_raw_CHAMBER; + #endif + #endif + + #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED + static uint8_t consecutive_low_temperature_error[HOTENDS]; + #endif + + #ifdef MILLISECONDS_PREHEAT_TIME + static millis_t preheat_end_time[HOTENDS]; + #endif + + TERN_(HAS_AUTO_FAN, static millis_t next_auto_fan_check_ms); + + TERN_(PROBING_HEATERS_OFF, static bool paused); + + public: + #if HAS_ADC_BUTTONS + static uint32_t current_ADCKey_raw; + static uint16_t ADCKey_count; + #endif + + TERN_(PID_EXTRUSION_SCALING, static int16_t lpq_len); + + /** + * Instance Methods + */ + + void init(); + + /** + * Static (class) methods + */ + + #if HAS_USER_THERMISTORS + static user_thermistor_t user_thermistor[USER_THERMISTORS]; + static void log_user_thermistor(const uint8_t t_index, const bool eprom=false); + static void reset_user_thermistors(); + static float user_thermistor_to_deg_c(const uint8_t t_index, const int raw); + static bool set_pull_up_res(int8_t t_index, float value) { + //if (!WITHIN(t_index, 0, USER_THERMISTORS - 1)) return false; + if (!WITHIN(value, 1, 1000000)) return false; + user_thermistor[t_index].series_res = value; + return true; + } + static bool set_res25(int8_t t_index, float value) { + if (!WITHIN(value, 1, 10000000)) return false; + user_thermistor[t_index].res_25 = value; + user_thermistor[t_index].pre_calc = true; + return true; + } + static bool set_beta(int8_t t_index, float value) { + if (!WITHIN(value, 1, 1000000)) return false; + user_thermistor[t_index].beta = value; + user_thermistor[t_index].pre_calc = true; + return true; + } + static bool set_sh_coeff(int8_t t_index, float value) { + if (!WITHIN(value, -0.01f, 0.01f)) return false; + user_thermistor[t_index].sh_c_coeff = value; + user_thermistor[t_index].pre_calc = true; + return true; + } + #endif + + #if HAS_HOTEND + static float analog_to_celsius_hotend(const int raw, const uint8_t e); + #endif + + #if HAS_HEATED_BED + static float analog_to_celsius_bed(const int raw); + #endif + #if HAS_TEMP_PROBE + static float analog_to_celsius_probe(const int raw); + #endif + #if HAS_TEMP_CHAMBER + static float analog_to_celsius_chamber(const int raw); + #endif + + #if HAS_FAN + + static uint8_t fan_speed[FAN_COUNT]; + #define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT) + + static void set_fan_speed(const uint8_t target, const uint16_t speed); + + #if ENABLED(REPORT_FAN_CHANGE) + static void report_fan_speed(const uint8_t target); + #endif + + #if EITHER(PROBING_FANS_OFF, ADVANCED_PAUSE_FANS_PAUSE) + static bool fans_paused; + static uint8_t saved_fan_speed[FAN_COUNT]; + #endif + + static constexpr inline uint8_t fanPercent(const uint8_t speed) { return ui8_to_percent(speed); } + + TERN_(ADAPTIVE_FAN_SLOWING, static uint8_t fan_speed_scaler[FAN_COUNT]); + + static inline uint8_t scaledFanSpeed(const uint8_t target, const uint8_t fs) { + UNUSED(target); // Potentially unused! + return (fs * uint16_t(TERN(ADAPTIVE_FAN_SLOWING, fan_speed_scaler[target], 128))) >> 7; + } + + static inline uint8_t scaledFanSpeed(const uint8_t target) { + return scaledFanSpeed(target, fan_speed[target]); + } + + #if ENABLED(EXTRA_FAN_SPEED) + static uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT]; + static void set_temp_fan_speed(const uint8_t fan, const uint16_t tmp_temp); + #endif + + #if EITHER(PROBING_FANS_OFF, ADVANCED_PAUSE_FANS_PAUSE) + void set_fans_paused(const bool p); + #endif + + #endif // HAS_FAN + + static inline void zero_fan_speeds() { + #if HAS_FAN + FANS_LOOP(i) set_fan_speed(i, 0); + #endif + } + + /** + * Called from the Temperature ISR + */ + static void readings_ready(); + static void tick(); + + /** + * Call periodically to manage heaters + */ + static void manage_heater() _O2; // Added _O2 to work around a compiler error + + /** + * Preheating hotends + */ + #ifdef MILLISECONDS_PREHEAT_TIME + static bool is_preheating(const uint8_t E_NAME) { + return preheat_end_time[HOTEND_INDEX] && PENDING(millis(), preheat_end_time[HOTEND_INDEX]); + } + static void start_preheat_time(const uint8_t E_NAME) { + preheat_end_time[HOTEND_INDEX] = millis() + MILLISECONDS_PREHEAT_TIME; + } + static void reset_preheat_time(const uint8_t E_NAME) { + preheat_end_time[HOTEND_INDEX] = 0; + } + #else + #define is_preheating(n) (false) + #endif + + //high level conversion routines, for use outside of temperature.cpp + //inline so that there is no performance decrease. + //deg=degreeCelsius + + FORCE_INLINE static float degHotend(const uint8_t E_NAME) { + return TERN0(HAS_HOTEND, temp_hotend[HOTEND_INDEX].celsius); + } + + #if ENABLED(SHOW_TEMP_ADC_VALUES) + FORCE_INLINE static int16_t rawHotendTemp(const uint8_t E_NAME) { + return TERN0(HAS_HOTEND, temp_hotend[HOTEND_INDEX].raw); + } + #endif + + FORCE_INLINE static int16_t degTargetHotend(const uint8_t E_NAME) { + return TERN0(HAS_HOTEND, temp_hotend[HOTEND_INDEX].target); + } + + #if WATCH_HOTENDS + static void start_watching_hotend(const uint8_t e=0); + #else + static inline void start_watching_hotend(const uint8_t=0) {} + #endif + + #if HAS_HOTEND + + static void setTargetHotend(const int16_t celsius, const uint8_t E_NAME) { + const uint8_t ee = HOTEND_INDEX; + #ifdef MILLISECONDS_PREHEAT_TIME + if (celsius == 0) + reset_preheat_time(ee); + else if (temp_hotend[ee].target == 0) + start_preheat_time(ee); + #endif + TERN_(AUTO_POWER_CONTROL, if (celsius) powerManager.power_on()); + temp_hotend[ee].target = _MIN(celsius, temp_range[ee].maxtemp - HOTEND_OVERSHOOT); + start_watching_hotend(ee); + } + + FORCE_INLINE static bool isHeatingHotend(const uint8_t E_NAME) { + return temp_hotend[HOTEND_INDEX].target > temp_hotend[HOTEND_INDEX].celsius; + } + + FORCE_INLINE static bool isCoolingHotend(const uint8_t E_NAME) { + return temp_hotend[HOTEND_INDEX].target < temp_hotend[HOTEND_INDEX].celsius; + } + + #if HAS_TEMP_HOTEND + static bool wait_for_hotend(const uint8_t target_extruder, const bool no_wait_for_cooling=true + #if G26_CLICK_CAN_CANCEL + , const bool click_to_cancel=false + #endif + ); + #endif + + FORCE_INLINE static bool still_heating(const uint8_t e) { + return degTargetHotend(e) > TEMP_HYSTERESIS && ABS(degHotend(e) - degTargetHotend(e)) > TEMP_HYSTERESIS; + } + + FORCE_INLINE static bool degHotendNear(const uint8_t e, const float &temp) { + return ABS(degHotend(e) - temp) < (TEMP_HYSTERESIS); + } + + #endif // HAS_HOTEND + + #if HAS_HEATED_BED + + #if ENABLED(SHOW_TEMP_ADC_VALUES) + FORCE_INLINE static int16_t rawBedTemp() { return temp_bed.raw; } + #endif + FORCE_INLINE static float degBed() { return temp_bed.celsius; } + FORCE_INLINE static int16_t degTargetBed() { return temp_bed.target; } + FORCE_INLINE static bool isHeatingBed() { return temp_bed.target > temp_bed.celsius; } + FORCE_INLINE static bool isCoolingBed() { return temp_bed.target < temp_bed.celsius; } + + #if WATCH_BED + static void start_watching_bed(); + #else + static inline void start_watching_bed() {} + #endif + + static void setTargetBed(const int16_t celsius) { + TERN_(AUTO_POWER_CONTROL, if (celsius) powerManager.power_on()); + temp_bed.target = + #ifdef BED_MAX_TARGET + _MIN(celsius, BED_MAX_TARGET) + #else + celsius + #endif + ; + start_watching_bed(); + } + + static bool wait_for_bed(const bool no_wait_for_cooling=true + #if G26_CLICK_CAN_CANCEL + , const bool click_to_cancel=false + #endif + ); + + static void wait_for_bed_heating(); + + FORCE_INLINE static bool degBedNear(const float &temp) { + return ABS(degBed() - temp) < (TEMP_BED_HYSTERESIS); + } + + #endif // HAS_HEATED_BED + + #if HAS_TEMP_PROBE + #if ENABLED(SHOW_TEMP_ADC_VALUES) + FORCE_INLINE static int16_t rawProbeTemp() { return temp_probe.raw; } + #endif + FORCE_INLINE static float degProbe() { return temp_probe.celsius; } + FORCE_INLINE static bool isProbeBelowTemp(const float target_temp) { return temp_probe.celsius < target_temp; } + FORCE_INLINE static bool isProbeAboveTemp(const float target_temp) { return temp_probe.celsius > target_temp; } + static bool wait_for_probe(const float target_temp, bool no_wait_for_cooling=true); + #endif + + #if WATCH_PROBE + static void start_watching_probe(); + #else + static inline void start_watching_probe() {} + #endif + + #if HAS_TEMP_CHAMBER + #if ENABLED(SHOW_TEMP_ADC_VALUES) + FORCE_INLINE static int16_t rawChamberTemp() { return temp_chamber.raw; } + #endif + FORCE_INLINE static float degChamber() { return temp_chamber.celsius; } + #if HAS_HEATED_CHAMBER + FORCE_INLINE static int16_t degTargetChamber() { return temp_chamber.target; } + FORCE_INLINE static bool isHeatingChamber() { return temp_chamber.target > temp_chamber.celsius; } + FORCE_INLINE static bool isCoolingChamber() { return temp_chamber.target < temp_chamber.celsius; } + + static bool wait_for_chamber(const bool no_wait_for_cooling=true); + #endif + #endif + + #if WATCH_CHAMBER + static void start_watching_chamber(); + #else + static inline void start_watching_chamber() {} + #endif + + #if HAS_HEATED_CHAMBER + static void setTargetChamber(const int16_t celsius) { + temp_chamber.target = + #ifdef CHAMBER_MAXTEMP + _MIN(celsius, CHAMBER_MAXTEMP - 10) + #else + celsius + #endif + ; + start_watching_chamber(); + } + #endif + + /** + * The software PWM power for a heater + */ + static int16_t getHeaterPower(const heater_id_t heater_id); + + /** + * Switch off all heaters, set all target temperatures to 0 + */ + static void disable_all_heaters(); + + #if ENABLED(PRINTJOB_TIMER_AUTOSTART) + /** + * Methods to check if heaters are enabled, indicating an active job + */ + static bool auto_job_over_threshold(); + static void auto_job_check_timer(const bool can_start, const bool can_stop); + #endif + + /** + * Perform auto-tuning for hotend or bed in response to M303 + */ + #if HAS_PID_HEATING + static void PID_autotune(const float &target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result=false); + + #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING) + static bool adaptive_fan_slowing; + #elif ENABLED(ADAPTIVE_FAN_SLOWING) + static constexpr bool adaptive_fan_slowing = true; + #endif + + /** + * Update the temp manager when PID values change + */ + #if ENABLED(PIDTEMP) + FORCE_INLINE static void updatePID() { + TERN_(PID_EXTRUSION_SCALING, last_e_position = 0); + } + #endif + + #endif + + #if ENABLED(PROBING_HEATERS_OFF) + static void pause(const bool p); + FORCE_INLINE static bool is_paused() { return paused; } + #endif + + #if HEATER_IDLE_HANDLER + + static void reset_hotend_idle_timer(const uint8_t E_NAME) { + heater_idle[HOTEND_INDEX].reset(); + start_watching_hotend(HOTEND_INDEX); + } + + #if HAS_HEATED_BED + static void reset_bed_idle_timer() { + heater_idle[IDLE_INDEX_BED].reset(); + start_watching_bed(); + } + #endif + + #endif // HEATER_IDLE_HANDLER + + #if HAS_TEMP_SENSOR + static void print_heater_states(const uint8_t target_extruder + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + , const bool include_r=false + #endif + ); + #if ENABLED(AUTO_REPORT_TEMPERATURES) + struct AutoReportTemp { static void report(); }; + static AutoReporter auto_reporter; + #endif + #endif + + TERN_(HAS_DISPLAY, static void set_heating_message(const uint8_t e)); + + #if HAS_LCD_MENU && HAS_TEMPERATURE + static void lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb); + #endif + + private: + static void update_raw_temperatures(); + static void updateTemperaturesFromRawValues(); + + #define HAS_MAX6675 EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) + #if HAS_MAX6675 + #define COUNT_6675 1 + BOTH(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) + #if COUNT_6675 > 1 + #define HAS_MULTI_6675 1 + #define READ_MAX6675(N) read_max6675(N) + #else + #define READ_MAX6675(N) read_max6675() + #endif + static int read_max6675(TERN_(HAS_MULTI_6675, const uint8_t hindex=0)); + #endif + + static void checkExtruderAutoFans(); + + static float get_pid_output_hotend(const uint8_t e); + + TERN_(PIDTEMPBED, static float get_pid_output_bed()); + + TERN_(HAS_HEATED_CHAMBER, static float get_pid_output_chamber()); + + static void _temp_error(const heater_id_t e, PGM_P const serial_msg, PGM_P const lcd_msg); + static void min_temp_error(const heater_id_t e); + static void max_temp_error(const heater_id_t e); + + #define HAS_THERMAL_PROTECTION ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_CHAMBER, HAS_THERMALLY_PROTECTED_BED) + + #if HAS_THERMAL_PROTECTION + + // Indices and size for the tr_state_machine array. One for each protected heater. + #define _ENUM_FOR_E(N) RUNAWAY_IND_E##N, + enum RunawayIndex : uint8_t { + #if ENABLED(THERMAL_PROTECTION_HOTENDS) + REPEAT(HOTENDS, _ENUM_FOR_E) + #endif + #if ENABLED(HAS_THERMALLY_PROTECTED_BED) + RUNAWAY_IND_BED, + #endif + #if ENABLED(THERMAL_PROTECTION_CHAMBER) + RUNAWAY_IND_CHAMBER, + #endif + NR_HEATER_RUNAWAY + }; + #undef _ENUM_FOR_E + + // Convert the given heater_id_t to runaway state array index + static inline RunawayIndex runaway_index_for_id(const int8_t heater_id) { + #if HAS_THERMALLY_PROTECTED_CHAMBER + if (heater_id == H_CHAMBER) return RUNAWAY_IND_CHAMBER; + #endif + #if HAS_THERMALLY_PROTECTED_BED + if (heater_id == H_BED) return RUNAWAY_IND_BED; + #endif + return (RunawayIndex)_MAX(heater_id, 0); + } + + enum TRState : char { TRInactive, TRFirstHeating, TRStable, TRRunaway }; + + typedef struct { + millis_t timer = 0; + TRState state = TRInactive; + float running_temp; + void run(const float ¤t, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc); + } tr_state_machine_t; + + static tr_state_machine_t tr_state_machine[NR_HEATER_RUNAWAY]; + + #endif // HAS_THERMAL_PROTECTION +}; + +extern Temperature thermalManager; -- cgit v1.2.3