From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h | 160 ++++++++ Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h | 182 +++++++++ Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h | 155 ++++++++ Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h | 236 ++++++++++++ Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h | 390 +++++++++++++++++++ Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h | 524 ++++++++++++++++++++++++++ Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 188 +++++++++ Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h | 168 +++++++++ Marlin/src/pins/lpc1768/pins_MKS_SBASE.h | 388 +++++++++++++++++++ Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h | 395 +++++++++++++++++++ Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h | 518 +++++++++++++++++++++++++ Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h | 118 ++++++ 12 files changed, 3422 insertions(+) create mode 100644 Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h create mode 100644 Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h create mode 100644 Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h create mode 100644 Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h create mode 100644 Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h create mode 100644 Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h create mode 100644 Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h create mode 100644 Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h create mode 100644 Marlin/src/pins/lpc1768/pins_MKS_SBASE.h create mode 100644 Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h create mode 100644 Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h create mode 100644 Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h (limited to 'Marlin/src/pins/lpc1768') diff --git a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h new file mode 100644 index 0000000..70682ad --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h @@ -0,0 +1,160 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * AZSMZ MINI pin assignments + */ + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "AZSMZ MINI" + +// +// Servos +// +#define SERVO0_PIN P1_23 + +// +// Limit Switches +// +#define X_MIN_PIN P1_24 +#define Y_MIN_PIN P1_26 +#define Z_MIN_PIN P1_28 +#define Z_MAX_PIN P1_29 + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 + +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_23_A0 // A0 (TH1) +#define TEMP_BED_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) + +// +// Heaters / Fans +// +// EFB +#define HEATER_0_PIN P2_04 +#define HEATER_BED_PIN P2_05 +#ifndef FAN_PIN + #define FAN_PIN P2_07 +#endif +#define FAN1_PIN P0_26 + +#define LCD_SDSS P0_16 // LCD SD chip select +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if ENABLED(AZSMZ_12864) + #define BEEPER_PIN P1_30 + #define DOGLCD_A0 P2_06 + #define DOGLCD_CS P1_22 + #define BTN_EN1 P4_28 + #define BTN_EN2 P1_27 + #define BTN_ENC P3_26 + #ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION LCD + #endif +#endif + +#if SD_CONNECTION_IS(LCD) + #define SD_SCK_PIN P0_15 + #define SD_MISO_PIN P0_17 + #define SD_MOSI_PIN P0_18 + #define SD_SS_PIN LCD_SDSS + #define SD_DETECT_PIN P3_25 +#elif SD_CONNECTION_IS(ONBOARD) + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #define SD_SS_PIN ONBOARD_SD_CS_PIN +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +// +// Ethernet pins +// +#define ENET_MDIO P1_17 +#define ENET_RX_ER P1_14 +#define ENET_RXD1 P1_10 +#define ENET_MOC P1_16 +#define REF_CLK P1_15 +#define ENET_RXD0 P1_09 +#define ENET_CRS P1_08 +#define ENET_TX_EN P1_04 +#define ENET_TXD0 P1_00 +#define ENET_TXD1 P1_01 + +/** + * PWMs + * + * There are 6 PWMs. Each PWM can be assigned to one of two pins. + * + * SERVO2 does NOT have a PWM assigned to it. + * + * PWM1.1 DIO4 SERVO3_PIN FIL_RUNOUT_PIN 5V output, PWM + * PWM1.1 DIO26 E0_STEP_PIN + * PWM1.2 DIO11 SERVO0_PIN + * PWM1.2 DIO54 X_STEP_PIN + * PWM1.3 DIO6 SERVO1_PIN J5-1 + * PWM1.3 DIO60 Y_STEP_PIN + * PWM1.4 DIO53 SDSS(SSEL0) J3-5 AUX-3 + * PWM1.4 DIO46 Z_STEP_PIN + * PWM1.5 DIO3 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES + * PWM1.5 DIO9 RAMPS_D9_PIN + * PWM1.6 DIO14 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES + * PWM1.6 DIO10 RAMPS_D10_PIN + */ + + /** + * Special pins + * D37 - not 5V tolerant + * D49 - not 5V tolerant + * D57 - open collector + * D58 - open collector + */ diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h new file mode 100644 index 0000000..5ac119f --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -0,0 +1,182 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * BIQU BQ111-A4 + * + * Applies to the following boards: + * + * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) + */ + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "BIQU Thunder B300 V1.0" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 +#ifndef X_CS_PIN + #define X_CS_PIN P1_15 // ETH +#endif + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_14 // ETH +#endif + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_16 // ETH +#endif + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_17 // ETH +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P0_18 // ETH + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P0_17 // ETH + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P0_15 // ETH + #endif +#endif + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_24_A1 // A0 (T0) +#define TEMP_BED_PIN P0_23_A0 // A1 (T1) + +// +// Heaters / Fans +// +#define HEATER_0_PIN P2_07 +#define HEATER_BED_PIN P2_05 +#ifndef FAN_PIN + #define FAN_PIN P2_04 +#endif + +// +// Unused +// +//#define PIN_P2_10 P2_10 // IBOOT-1 +//#define PIN_P0_27 P0_27 // Onboard SD Detect + +/** + * LCD / Controller + * + * REPRAP_DISCOUNT_SMART_CONTROLLER is not supported due to the lack of LCD_PINS_D5, + * LCD_PINS_D6 or LCD_PINS_D7 in the EXP1 connector. + * + * A remote SD card is not supported as the pins routed to EXP2 are the same as used + * for the onboard SD card, and a chip select signal is not provided for the remote + * SD card. + */ +#if HAS_WIRED_LCD + + #define BEEPER_PIN P1_31 // EXP1-1 + + #define BTN_EN1 P3_26 // EXP2-3 + #define BTN_EN2 P3_25 // EXP2-5 + #define BTN_ENC P1_30 // EXP1-2 + + #define SD_DETECT_PIN P0_27 // EXP2-7 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 + #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 + + #if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC) + #error "REPRAP_DISCOUNT_SMART_CONTROLLER displays aren't supported by the BIQU B300 v1.0" + #endif + + #if ENABLED(SDSUPPORT) + #error "SDSUPPORT is not supported by the BIQU B300 v1.0 when an LCD controller is used" + #endif + +#endif // HAS_WIRED_LCD + +/** + * SD Card Reader + * + * Software SPI is used to interface with a stand-alone SD card reader connected to EXP1. + * Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board. + */ +#if ENABLED(SDSUPPORT) + #define SD_SCK_PIN P0_15 // EXP1-5 + #define SD_MISO_PIN P0_16 // EXP1-4 + #define SD_MOSI_PIN P0_18 // EXP1-3 + #define SD_SS_PIN P1_30 // EXP1-2 + #define SDSS SD_SS_PIN +#endif + +/** + * PWMS + * + * There are 6 PWMS. Each PWM can be assigned to one of two pins. + * + * PWM1.1 P0_18 LCD_PINS_ENABLE + * PWM1.1 P2_0 X_STEP_PIN + * PWM1.2 P1_20 + * PWM1.2 P2_1 Y_STEP_PIN + * PWM1.3 P1_21 + * PWM1.3 P2_2 Z_STEP_PIN + * PWM1.4 P1_23 + * PWM1.4 P2_3 E0_STEP_PIN + * PWM1.5 P1_24 X_MIN_PIN + * PWM1.5 P2_4 FAN_PIN + * PWM1.6 P1_26 Y_MIN_PIN + * PWM1.6 P2_5 HEATER_BED_PIN + */ diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h new file mode 100644 index 0000000..3b2137b --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -0,0 +1,155 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * BIQU BQ111-A4 + * + * Applies to the following boards: + * + * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) + */ + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "BIQU BQ111-A4" + +// +// Limit Switches +// +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_23_A0 // A0 (T0) +#define TEMP_BED_PIN P0_24_A1 // A1 (T1) + +// +// Heaters / Fans +// +#define HEATER_0_PIN P2_07 +#define HEATER_BED_PIN P2_05 +#ifndef FAN_PIN + #define FAN_PIN P2_04 +#endif + +// +// Unused +// +//#define PIN_P2_10 P2_10 // IBOOT-1 +//#define PIN_P0_27 P0_27 // Onboard SD Detect + +/** + * LCD / Controller + * + * REPRAP_DISCOUNT_SMART_CONTROLLER is not supported due to the lack of LCD_PINS_D5, + * LCD_PINS_D6 or LCD_PINS_D7 in the EXP1 connector. + * + * A remote SD card is not supported as the pins routed to EXP2 are the same as used + * for the onboard SD card, and a chip select signal is not provided for the remote + * SD card. + */ +#if HAS_WIRED_LCD + + #define BEEPER_PIN P1_31 // EXP1-1 + + #define BTN_EN1 P3_26 // EXP2-3 + #define BTN_EN2 P3_25 // EXP2-5 + #define BTN_ENC P1_30 // EXP1-2 + + #define SD_DETECT_PIN P0_27 // EXP2-7 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 + #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 + + #if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC) + #error "REPRAP_DISCOUNT_SMART_CONTROLLER displays aren't supported by the BIQU BQ111-A4" + #endif + + #if ENABLED(SDSUPPORT) + #error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used" + #endif + +#endif // HAS_WIRED_LCD + +/** + * SD Card Reader + * + * Software SPI is used to interface with a stand-alone SD card reader connected to EXP1. + * Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board. + */ +#if ENABLED(SDSUPPORT) + + #define SD_SCK_PIN P0_15 // EXP1-5 + #define SD_MISO_PIN P0_16 // EXP1-4 + #define SD_MOSI_PIN P0_18 // EXP1-3 + #define SD_SS_PIN P1_30 // EXP1-2 + #define SDSS SD_SS_PIN + +#endif // SDSUPPORT + +/** + * PWMS + * + * There are 6 PWMS. Each PWM can be assigned to one of two pins. + * + * PWM1.1 P0_18 LCD_PINS_ENABLE + * PWM1.1 P2_0 X_STEP_PIN + * PWM1.2 P1_20 + * PWM1.2 P2_1 Y_STEP_PIN + * PWM1.3 P1_21 + * PWM1.3 P2_2 Z_STEP_PIN + * PWM1.4 P1_23 + * PWM1.4 P2_3 E0_STEP_PIN + * PWM1.5 P1_24 X_MIN_PIN + * PWM1.5 P2_4 FAN_PIN + * PWM1.6 P1_26 Y_MIN_PIN + * PWM1.6 P2_5 HEATER_BED_PIN + */ diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h new file mode 100644 index 0000000..8c1396d --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h @@ -0,0 +1,236 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define BOARD_INFO_NAME "BTT SKR V1.1" + +// +// Limit Switches +// +#define X_MIN_PIN P1_29 +#define X_MAX_PIN P1_28 +#define Y_MIN_PIN P1_27 +#define Y_MAX_PIN P1_26 +#define Z_MIN_PIN P1_25 +#define Z_MAX_PIN P1_24 + +// +// Steppers +// +#define X_STEP_PIN P0_04 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P4_28 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P2_02 +#define Y_ENABLE_PIN P2_00 + +#define Z_STEP_PIN P0_20 +#define Z_DIR_PIN P0_21 +#define Z_ENABLE_PIN P0_19 + +#define E0_STEP_PIN P0_11 +#define E0_DIR_PIN P2_13 +#define E0_ENABLE_PIN P2_12 + +/** + * LCD / Controller + * + * As of 20 JAN 2019 only the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER display has + * been tested with these settings. It can be connected to the SKR using standard cables + * via the EXP1 and EXP2 ports. Other displays may need a custom cable and/or changes to + * the pins defined below. + * + * The SD card on the LCD controller uses the same SPI signals as the LCD, resulting in + * garbage/lines on the LCD display during SD card access. The LCD code mitigates this + * by redrawing the screen after SD card accesses. + */ + +#if IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_26 + #endif + + #define SD_DETECT_PIN P1_31 + +#elif HAS_WIRED_LCD + + #define BTN_EN1 P3_26 + #define BTN_EN2 P3_25 + #define BTN_ENC P2_11 + + #define SD_DETECT_PIN P1_31 + #define LCD_SDSS P1_23 + #define LCD_PINS_RS P0_16 + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_CS P2_06 + #define DOGLCD_A0 P0_16 + #endif + +#endif // HAS_WIRED_LCD + +// +// SD Support +// +// MKS_MINI_12864 strongly prefers the SD card on the display and +// requires jumpers on the SKR V1.1 board as documented here: +// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/ +#ifndef SDCARD_CONNECTION + #if ANY(MKS_MINI_12864, ENDER2_STOCKDISPLAY, IS_TFTGLCD_PANEL) + #define SDCARD_CONNECTION LCD + #else + #define SDCARD_CONNECTION ONBOARD + #endif +#endif + +#if SD_CONNECTION_IS(LCD) + #define SD_SS_PIN P1_23 +#endif + +// Trinamic driver support + +#if HAS_TRINAMIC_CONFIG + // Using TMC devices in intelligent mode requires extra connections to each device. Unfortunately + // the SKR does not have many free pins (especially if a display is in use). The SPI-based devices + // will require 3 connections (clock, mosi, miso), plus a chip select line (CS) for each driver. + // The UART-based devices require 2 pis per deriver (one of which must be interrupt capable). + // The same SPI pins can be shared with the display/SD card reader, meaning SPI-based devices are + // probably a good choice for this board. + // + // SOFTWARE_DRIVER_ENABLE is a good option. It uses SPI to control the driver enable and allows the + // hardware ENABLE pins for each driver to be repurposed as SPI chip select. To use this mode the + // driver modules will probably need to be modified, removing the pin used for the enable line from + // the module and wiring this connection directly to GND (as is the case for TMC2130). + // Using this option and sharing all of the SPI pins allows 5 TMC2130 drivers to be used along with + // a REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER without requiring the use of any extra pins. + // + // Other options will probably require the use of any free pins and the TFT serial port or a + // different type of display (like the TFT), using the pins normally used for the display and encoder. + // Unfortunately, tests show it's not possible to use endstop and thermistor pins for chip-select. + // Sample settings are provided below, but only some have been tested. + // + // Another option is to share the enable and chip-select pins when using SPI. Several users have + // reported that this works. However, it's unlikely that this configuration will allow SPI communi- + // cation with the device when the drivers are active, meaning that some of the more advanced TMC + // options may not be available. + + // When using any TMC SPI-based drivers, software SPI is used + // because pins may be shared with the display or SD card. + #define TMC_USE_SW_SPI + #define TMC_SW_MOSI P0_18 + #define TMC_SW_MISO P0_17 + // To minimize pin usage use the same clock pin as the display/SD card reader. (May generate LCD noise.) + #define TMC_SW_SCK P0_15 + // If pin 2_06 is unused, it can be used for the clock to avoid the LCD noise. + //#define TMC_SW_SCK P2_06 + + #if ENABLED(SOFTWARE_DRIVER_ENABLE) + + // Software enable allows the enable pins to be repurposed as chip-select pins. + // Note: Requires the driver modules to be modified to always be enabled with the enable pin removed. + #if AXIS_DRIVER_TYPE_X(TMC2130) + #define X_CS_PIN P4_28 + #undef X_ENABLE_PIN + #endif + + #if AXIS_DRIVER_TYPE_Y(TMC2130) + #define Y_CS_PIN P2_00 + #undef Y_ENABLE_PIN + #endif + + #if AXIS_DRIVER_TYPE_Z(TMC2130) + #define Z_CS_PIN P0_19 + #undef Z_ENABLE_PIN + #endif + + #if AXIS_DRIVER_TYPE_E0(TMC2130) + #define E0_CS_PIN P2_12 + #undef E0_ENABLE_PIN + #endif + + #if AXIS_DRIVER_TYPE_E1(TMC2130) + #define E1_CS_PIN P0_10 + #undef E1_ENABLE_PIN + #endif + + #else // !SOFTWARE_DRIVER_ENABLE + + // A chip-select pin is needed for each driver. + + // EXAMPLES + + // Example 1: No LCD attached or a TFT style display using the AUX header RX/TX pins. + // SDCARD_CONNECTION must not be 'LCD'. Nothing should be connected to EXP1/EXP2. + //#define SKR_USE_LCD_PINS_FOR_CS + #if ENABLED(SKR_USE_LCD_PINS_FOR_CS) + #if SD_CONNECTION_IS(LCD) + #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS." + #endif + #define X_CS_PIN P1_23 + #define Y_CS_PIN P3_26 + #define Z_CS_PIN P2_11 + #define E0_CS_PIN P3_25 + #define E1_CS_PIN P1_31 + #endif + + // Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + // The SD card reader attached to the LCD (if present) can't be used because + // the pins will be in use. So SDCARD_CONNECTION must not be 'LCD'. + //#define SKR_USE_LCD_SD_CARD_PINS_FOR_CS + #if ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS) + #if SD_CONNECTION_IS(LCD) + #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS." + #endif + #define X_CS_PIN P0_02 + #define Y_CS_PIN P0_03 + #define Z_CS_PIN P2_06 + // We use SD_DETECT_PIN for E0 + #undef SD_DETECT_PIN + #define E0_CS_PIN P1_31 + // We use LCD_SDSS pin for E1 + #undef LCD_SDSS + #define LCD_SDSS -1 + #define E1_CS_PIN P1_23 + #endif + + // Example 3: Use the driver enable pins for chip-select. + // Commands must not be sent to the drivers when enabled. So certain + // advanced features (like driver monitoring) will not be available. + //#define SKR_USE_ENABLE_CS + #if ENABLED(SKR_USE_ENABLE_FOR_CS) + #define X_CS_PIN X_ENABLE_PIN + #define Y_CS_PIN Y_ENABLE_PIN + #define Z_CS_PIN Z_ENABLE_PIN + #define E0_CS_PIN E0_ENABLE_PIN + #define E1_CS_PIN E1_ENABLE_PIN + #endif + + #endif // SOFTWARE_DRIVER_ENABLE + +#endif + +// Include common SKR pins +#include "pins_BTT_SKR_common.h" diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h new file mode 100644 index 0000000..e5b7802 --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -0,0 +1,390 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define BOARD_INFO_NAME "BTT SKR V1.3" + +// +// Trinamic Stallguard pins +// +#define X_DIAG_PIN P1_29 // X- +#define Y_DIAG_PIN P1_27 // Y- +#define Z_DIAG_PIN P1_25 // Z- +#define E0_DIAG_PIN P1_28 // X+ +#define E1_DIAG_PIN P1_26 // Y+ + +// +// Limit Switches +// +#ifdef X_STALL_SENSITIVITY + #define X_STOP_PIN X_DIAG_PIN + #if X_HOME_DIR < 0 + #define X_MAX_PIN P1_28 // X+ + #else + #define X_MIN_PIN P1_28 // X+ + #endif +#else + #define X_MIN_PIN P1_29 // X- + #define X_MAX_PIN P1_28 // X+ +#endif + +#ifdef Y_STALL_SENSITIVITY + #define Y_STOP_PIN Y_DIAG_PIN + #if Y_HOME_DIR < 0 + #define Y_MAX_PIN P1_26 // Y+ + #else + #define Y_MIN_PIN P1_26 // Y+ + #endif +#else + #define Y_MIN_PIN P1_27 // Y- + #define Y_MAX_PIN P1_26 // Y+ +#endif + +#ifdef Z_STALL_SENSITIVITY + #define Z_STOP_PIN Z_DIAG_PIN + #if Z_HOME_DIR < 0 + #define Z_MAX_PIN P1_24 // Z+ + #else + #define Z_MIN_PIN P1_24 // Z+ + #endif +#else + #define Z_MIN_PIN P1_25 // Z- + #define Z_MAX_PIN P1_24 // Z+ +#endif + +#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups + +// +// Servos +// +#ifndef SERVO0_PIN + #define SERVO0_PIN P2_00 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN P1_24 +#endif + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN P1_28 +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_06 +#define X_ENABLE_PIN P2_01 +#ifndef X_CS_PIN + #define X_CS_PIN P1_17 +#endif + +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_15 +#endif + +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_10 +#endif + +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_08 +#endif + +#ifndef E1_CS_PIN + #define E1_CS_PIN P1_01 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P4_28 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P0_05 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P0_04 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN P4_29 + #define X_SERIAL_RX_PIN P1_17 + + #define Y_SERIAL_TX_PIN P1_16 + #define Y_SERIAL_RX_PIN P1_15 + + #define Z_SERIAL_TX_PIN P1_14 + #define Z_SERIAL_RX_PIN P1_10 + + #define E0_SERIAL_TX_PIN P1_09 + #define E0_SERIAL_RX_PIN P1_08 + + #define E1_SERIAL_TX_PIN P1_04 + #define E1_SERIAL_RX_PIN P1_01 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +/** + * _____ _____ + * NC | 1 2 | GND 5V | 1 2 | GND + * RESET | 3 4 | 1.31 (SD_DETECT) (LCD_D7) 1.23 | 3 4 | 1.22 (LCD_D6) + * (MOSI) 0.18 | 5 6 3.25 (BTN_EN2) (LCD_D5) 1.21 | 5 6 1.20 (LCD_D4) + * (SD_SS) 0.16 | 7 8 | 3.26 (BTN_EN1) (LCD_RS) 1.19 | 7 8 | 1.18 (LCD_EN) + * (SCK) 0.15 | 9 10| 0.17 (MISO) (BTN_ENC) 0.28 | 9 10| 1.30 (BEEPER) + * ----- ----- + * EXP2 EXP1 + */ + +#define EXPA1_03_PIN P1_23 +#define EXPA1_04_PIN P1_22 +#define EXPA1_05_PIN P1_21 +#define EXPA1_06_PIN P1_20 +#define EXPA1_07_PIN P1_19 +#define EXPA1_08_PIN P1_18 +#define EXPA1_09_PIN P0_28 +#define EXPA1_10_PIN P1_30 + +#define EXPA2_03_PIN -1 +#define EXPA2_04_PIN P1_31 +#define EXPA2_05_PIN P0_18 +#define EXPA2_06_PIN P3_25 +#define EXPA2_07_PIN P0_16 +#define EXPA2_08_PIN P3_26 +#define EXPA2_09_PIN P0_15 +#define EXPA2_10_PIN P0_17 + +#if HAS_WIRED_LCD + #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING) + #error "ANET_FULL_GRAPHICS_LCD_ALT_WIRING only applies to the ANET 1.0 board." + + #elif ENABLED(ANET_FULL_GRAPHICS_LCD) + #error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. Comment out this line to continue." + + /** + * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. + * 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!) + * 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because this pin is open drain.) + * 4. A wire is needed to connect the Reset switch at J3 (LCD Pin7) to EXP2 (Pin3) on the board. + * + * !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!! + * + * The ANET_FULL_GRAPHICS_LCD connector plug: + * + * BEFORE AFTER + * _____ _____ + * GND 1 | 1 2 | 2 5V 5V 1 | 1 2 | 2 GND + * CS 3 | 3 4 | 4 BTN_EN2 CS 3 | 3 4 | 4 BTN_EN2 + * SID 5 | 5 6 6 BTN_EN1 SID 5 | 5 6 6 BTN_EN1 + * open 7 | 7 8 | 8 BTN_ENC CLK 7 | 7 8 | 8 BTN_ENC + * CLK 9 | 9 10| 10 Beeper open 9 | 9 10| 10 Beeper + * ----- ----- + * LCD LCD + */ + + #define LCD_PINS_RS EXPA1_03_PIN + + #define BTN_EN1 EXPA1_06_PIN + #define BTN_EN2 EXPA1_04_PIN + #define BTN_ENC EXPA1_08_PIN + + #define LCD_PINS_ENABLE EXPA1_05_PIN + #define LCD_PINS_D4 EXPA1_07_PIN + + #elif ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS EXPA1_04_PIN + + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN // (58) open-drain + + #define LCD_PINS_ENABLE EXPA1_03_PIN + #define LCD_PINS_D4 EXPA1_05_PIN + + #elif HAS_ADC_BUTTONS + + #error "ADC BUTTONS do not work unmodifed on SKR 1.3, The ADC ports cannot take more than 3.3v." + + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS EXPA2_08_PIN + #endif + + #define SD_DETECT_PIN EXPA2_04_PIN + + #else // !CR10_STOCKDISPLAY + + #define LCD_PINS_RS EXPA1_07_PIN + + #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 + #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 + #define BTN_ENC EXPA1_09_PIN // (58) open-drain + + #define LCD_PINS_ENABLE EXPA1_08_PIN + #define LCD_PINS_D4 EXPA1_06_PIN + + #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 + #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS EXPA1_08_PIN + #define DOGLCD_A0 EXPA1_07_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN + + #define LCD_BACKLIGHT_PIN -1 + + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN EXPA1_05_PIN + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN EXPA1_04_PIN + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN EXPA1_03_PIN + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN EXPA1_05_PIN + #endif + + #else // !FYSETC_MINI_12864 + + #if ENABLED(MKS_MINI_12864) + + #define DOGLCD_CS EXPA1_05_PIN + #define DOGLCD_A0 EXPA1_04_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN + + #elif ENABLED(ENDER2_STOCKDISPLAY) + + /** + * Creality Ender-2 display pinout + * _____ + * 5V | 1 2 | GND + * (MOSI) P1_23 | 3 4 | P1_22 (LCD_CS) + * (LCD_A0) P1_21 | 5 6 P1_20 (BTN_EN2) + * RESET P1_19 | 7 8 | P1_18 (BTN_EN1) + * (BTN_ENC) P0_28 | 9 10| P1_30 (SCK) + * ----- + * EXP1 + */ + + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN + #define DOGLCD_CS EXPA1_04_PIN + #define DOGLCD_A0 EXPA1_05_PIN + #define DOGLCD_SCK EXPA1_10_PIN + #define DOGLCD_MOSI EXPA1_03_PIN + #define FORCE_SOFT_SPI + #define LCD_BACKLIGHT_PIN -1 + #endif + + #if IS_ULTIPANEL + #define LCD_PINS_D5 EXPA1_05_PIN + #define LCD_PINS_D6 EXPA1_04_PIN + #define LCD_PINS_D7 EXPA1_03_PIN + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif // !FYSETC_MINI_12864 + + #endif // !CR10_STOCKDISPLAY + +#endif // HAS_WIRED_LCD + +// +// SD Support +// + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION LCD +#endif + +#if SD_CONNECTION_IS(LCD) + #define SD_SS_PIN EXPA2_07_PIN +#endif + +/** + * Special pins + * P1_30 (37) (NOT 5V tolerant) + * P1_31 (49) (NOT 5V tolerant) + * P0_27 (57) (Open collector) + * P0_28 (58) (Open collector) + */ + +// Include common SKR pins +#include "pins_BTT_SKR_common.h" diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h new file mode 100644 index 0000000..dfe86b1 --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -0,0 +1,524 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "BTT SKR V1.4" +#endif + +#ifndef BOARD_CUSTOM_BUILD_FLAGS + #define BOARD_CUSTOM_BUILD_FLAGS -DLPC_PINCFG_UART3_P4_28 +#endif + +// +// SD Connection +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION LCD +#endif + +// +// Servos +// +#define SERVO0_PIN P2_00 + +// +// TMC StallGuard DIAG pins +// +#define X_DIAG_PIN P1_29 // X-STOP +#define Y_DIAG_PIN P1_28 // Y-STOP +#define Z_DIAG_PIN P1_27 // Z-STOP +#define E0_DIAG_PIN P1_26 // E0DET +#define E1_DIAG_PIN P1_25 // E1DET + +// +// Limit Switches +// +#ifdef X_STALL_SENSITIVITY + #define X_STOP_PIN X_DIAG_PIN + #if X_HOME_DIR < 0 + #define X_MAX_PIN P1_26 // E0DET + #else + #define X_MIN_PIN P1_26 // E0DET + #endif +#elif ENABLED(X_DUAL_ENDSTOPS) + #ifndef X_MIN_PIN + #define X_MIN_PIN P1_29 // X-STOP + #endif + #ifndef X_MAX_PIN + #define X_MAX_PIN P1_26 // E0DET + #endif +#else + #define X_STOP_PIN P1_29 // X-STOP +#endif + +#ifdef Y_STALL_SENSITIVITY + #define Y_STOP_PIN Y_DIAG_PIN + #if Y_HOME_DIR < 0 + #define Y_MAX_PIN P1_25 // E1DET + #else + #define Y_MIN_PIN P1_25 // E1DET + #endif +#elif ENABLED(Y_DUAL_ENDSTOPS) + #ifndef Y_MIN_PIN + #define Y_MIN_PIN P1_28 // Y-STOP + #endif + #ifndef Y_MAX_PIN + #define Y_MAX_PIN P1_25 // E1DET + #endif +#else + #define Y_STOP_PIN P1_28 // Y-STOP +#endif + +#ifdef Z_STALL_SENSITIVITY + #define Z_STOP_PIN Z_DIAG_PIN + #if Z_HOME_DIR < 0 + #define Z_MAX_PIN P1_00 // PWRDET + #else + #define Z_MIN_PIN P1_00 // PWRDET + #endif +#elif ENABLED(Z_MULTI_ENDSTOPS) + #ifndef Z_MIN_PIN + #define Z_MIN_PIN P1_27 // Z-STOP + #endif + #ifndef Z_MAX_PIN + #define Z_MAX_PIN P1_00 // PWRDET + #endif +#else + #ifndef Z_STOP_PIN + #define Z_STOP_PIN P1_27 // Z-STOP + #endif +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN P0_10 +#endif + +// +// Filament Runout Sensor +// +#define FIL_RUNOUT_PIN P1_26 // E0DET +#define FIL_RUNOUT2_PIN P1_25 // E1DET + +// +// Power Supply Control +// +#ifndef PS_ON_PIN + #define PS_ON_PIN P1_00 // PWRDET +#endif + +// +// Power Loss Detection +// +#ifndef POWER_LOSS_PIN + #define POWER_LOSS_PIN P1_00 // PWRDET +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_06 +#define X_ENABLE_PIN P2_01 +#ifndef X_CS_PIN + #define X_CS_PIN P1_10 +#endif + +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_09 +#endif + +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_08 +#endif + +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_04 +#endif + +#define E1_STEP_PIN P1_15 +#define E1_DIR_PIN P1_14 +#define E1_ENABLE_PIN P1_16 +#ifndef E1_CS_PIN + #define E1_CS_PIN P1_01 +#endif + +#define TEMP_1_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_1_PIN +#define TEMP_BED_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_BED_PIN + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P1_17 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P0_05 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P0_04 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN P1_10 + #define X_SERIAL_RX_PIN P1_10 + + #define Y_SERIAL_TX_PIN P1_09 + #define Y_SERIAL_RX_PIN P1_09 + + #define Z_SERIAL_TX_PIN P1_08 + #define Z_SERIAL_RX_PIN P1_08 + + #define E0_SERIAL_TX_PIN P1_04 + #define E0_SERIAL_RX_PIN P1_04 + + #define E1_SERIAL_TX_PIN P1_01 + #define E1_SERIAL_RX_PIN P1_01 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +/* _____ _____ + * NC | 1 2 | GND 5V | 1 2 | GND + * RESET | 3 4 | 1.31 1.23 | 3 4 | 1.22 + * 0.18 | 5 6 3.25 1.21 | 5 6 1.20 + * 0.16 | 7 8 | 3.26 1.19 | 7 8 | 1.18 + * 0.15 | 9 10| 0.17 0.28 | 9 10| 1.30 + * ----- ----- + * EXP2 EXP1 + */ + +#define EXPA1_03_PIN P1_23 +#define EXPA1_04_PIN P1_22 +#define EXPA1_05_PIN P1_21 +#define EXPA1_06_PIN P1_20 +#define EXPA1_07_PIN P1_19 +#define EXPA1_08_PIN P1_18 +#define EXPA1_09_PIN P0_28 +#define EXPA1_10_PIN P1_30 + +#define EXPA2_03_PIN -1 +#define EXPA2_04_PIN P1_31 +#define EXPA2_05_PIN P0_18 +#define EXPA2_06_PIN P3_25 +#define EXPA2_07_PIN P0_16 +#define EXPA2_08_PIN P3_26 +#define EXPA2_09_PIN P0_15 +#define EXPA2_10_PIN P0_17 + +// +// SD Connection +// +#if SD_CONNECTION_IS(LCD) + #define SD_SS_PIN EXPA2_07_PIN +#endif + +/** + * _____ _____ + * NC | · · | GND 5V | · · | GND + * RESET | · · | 1.31 (SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6) + * (MOSI) 0.18 | · · 3.25 (BTN_EN2) (LCD_D5) 1.21 | · · 1.20 (LCD_D4) + * (SD_SS) 0.16 | · · | 3.26 (BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN) + * (SCK) 0.15 | · · | 0.17 (MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER) + * ----- ----- + * EXP2 EXP1 + */ + +#if ENABLED(DWIN_CREALITY_LCD) + + // RET6 DWIN ENCODER LCD + #define BTN_ENC P1_20 + #define BTN_EN1 P1_23 + #define BTN_EN2 P1_22 + + #ifndef BEEPER_PIN + #define BEEPER_PIN P1_21 + #undef SPEAKER + #endif + +#elif HAS_WIRED_LCD && !HAS_BTT_EXP_MOT + + #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING) + #error "CAUTION! ANET_FULL_GRAPHICS_LCD_ALT_WIRING requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue." + + /** + * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. + * 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!) + * + * !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!! + * + * The ANET_FULL_GRAPHICS_LCD_ALT_WIRING connector plug: + * + * BEFORE AFTER + * _____ _____ + * GND | 1 2 | 5V 5V | 1 2 | GND + * CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2 + * SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1 + * open | 7 8 | BTN_ENC open | 7 8 | BTN_ENC + * CLK | 9 10| Beeper CLK | 9 10| Beeper + * ----- ----- + * LCD LCD + */ + + #define LCD_PINS_RS EXPA1_07_PIN + + #define BTN_EN1 EXPA1_05_PIN + #define BTN_EN2 EXPA1_04_PIN + #define BTN_ENC EXPA1_10_PIN + + #define LCD_PINS_ENABLE EXPA1_08_PIN + #define LCD_PINS_D4 EXPA1_06_PIN + #define BEEPER_PIN EXPA1_03_PIN + + #elif ENABLED(ANET_FULL_GRAPHICS_LCD) + #error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue." + + /** + * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way. + * 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!) + * 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because this pin is open drain.) + * 4. A wire is needed to connect the Reset switch at J3 (LCD Pin7) to EXP2 (Pin3) on the board. + * + * !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!! + * + * The ANET_FULL_GRAPHICS_LCD connector plug: + * + * BEFORE AFTER + * _____ _____ + * GND | 1 2 | 5V 5V | 1 2 | GND + * CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2 + * SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1 + * open | 7 8 | BTN_ENC CLK | 7 8 | BTN_ENC + * CLK | 9 10| Beeper open | 9 10| Beeper + * ----- ----- + * LCD LCD + */ + + #define LCD_PINS_RS EXPA1_03_PIN + + #define BTN_EN1 EXPA1_06_PIN + #define BTN_EN2 EXPA1_04_PIN + #define BTN_ENC EXPA1_08_PIN + + #define LCD_PINS_ENABLE EXPA1_05_PIN + #define LCD_PINS_D4 EXPA1_07_PIN + + #define BEEPER_PIN EXPA1_10_PIN + + #elif ENABLED(CR10_STOCKDISPLAY) + #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define LCD_PINS_RS EXPA1_04_PIN + + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + + #define LCD_PINS_ENABLE EXPA1_03_PIN + #define LCD_PINS_D4 EXPA1_05_PIN + + #elif ENABLED(ENDER2_STOCKDISPLAY) + + /** Creality Ender-2 display pinout + * _____ + * 5V | 1 2 | GND + * (MOSI) 1.23 | 3 4 | 1.22 (LCD_RS) + * (LCD_A0) 1.21 | 5 6 1.20 (BTN_EN2) + * RESET 1.19 | 7 8 | 1.18 (BTN_EN1) + * (BTN_ENC) 0.28 | 9 10| 1.30 (SCK) + * ----- + * EXP1 + */ + + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN + + #define DOGLCD_CS EXPA1_04_PIN + #define DOGLCD_A0 EXPA1_05_PIN + #define DOGLCD_SCK EXPA1_10_PIN + #define DOGLCD_MOSI EXPA1_03_PIN + #define FORCE_SOFT_SPI + #define LCD_BACKLIGHT_PIN -1 + + #elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI + #define TFT_CS_PIN EXPA1_04_PIN + #define TFT_A0_PIN EXPA1_03_PIN + #define TFT_DC_PIN EXPA1_03_PIN + #define TFT_MISO_PIN EXPA2_10_PIN + #define TFT_BACKLIGHT_PIN EXPA1_08_PIN + #define TFT_RESET_PIN EXPA1_07_PIN + + #define LCD_USE_DMA_SPI + + #define TOUCH_INT_PIN EXPA1_05_PIN + #define TOUCH_CS_PIN EXPA1_06_PIN + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 + + // SPI 1 + #define SD_SCK_PIN EXPA2_09_PIN + #define SD_MISO_PIN EXPA2_10_PIN + #define SD_MOSI_PIN EXPA2_05_PIN + + // Disable any LCD related PINs config + #define LCD_PINS_ENABLE -1 + #define LCD_PINS_RS -1 + + #define TFT_BUFFER_SIZE 2400 + + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS EXPA2_08_PIN + #endif + + #define SD_DETECT_PIN EXPA2_04_PIN + + #else + + #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define LCD_PINS_RS EXPA1_07_PIN + + #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 + #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 + + #define LCD_PINS_ENABLE EXPA1_08_PIN + #define LCD_PINS_D4 EXPA1_06_PIN + + #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 + + #if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) + #endif + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS EXPA1_08_PIN + #define DOGLCD_A0 EXPA1_07_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN + + #define LCD_BACKLIGHT_PIN -1 + + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN EXPA1_05_PIN + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN EXPA1_04_PIN + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN EXPA1_03_PIN + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN EXPA1_05_PIN + #endif + + #else // !FYSETC_MINI_12864 + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_CS EXPA1_05_PIN + #define DOGLCD_A0 EXPA1_04_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN + #define FORCE_SOFT_SPI + #endif + + #if IS_ULTIPANEL + #define LCD_PINS_D5 EXPA1_05_PIN + #define LCD_PINS_D6 EXPA1_04_PIN + #define LCD_PINS_D7 EXPA1_03_PIN + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN EXPA1_03_PIN // Detect the presence of the encoder + #endif + + #endif + + #endif // !FYSETC_MINI_12864 + + #endif // HAS_MARLINUI_U8GLIB + +#endif // HAS_WIRED_LCD + +#if HAS_ADC_BUTTONS + #error "ADC BUTTONS do not work unmodifed on SKR 1.4, The ADC ports cannot take more than 3.3v." +#endif + +// +// NeoPixel LED +// +#ifndef NEOPIXEL_PIN + #define NEOPIXEL_PIN P1_24 +#endif + +/** + * Special pins + * P1_30 (37) (NOT 5V tolerant) + * P1_31 (49) (NOT 5V tolerant) + * P0_27 (57) (Open collector) + * P0_28 (58) (Open collector) + */ + +// +// Include common SKR pins +// +#include "pins_BTT_SKR_common.h" diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h new file mode 100644 index 0000000..a43940f --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -0,0 +1,188 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if ENABLED(SKR_HAS_LPC1769) + #if NOT_TARGET(MCU_LPC1769) + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." + #endif +#elif NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +// If you have the Big tree tech driver expantion module, enable HAS_BTT_EXP_MOT +// https://github.com/bigtreetech/BTT-Expansion-module/tree/master/BTT%20EXP-MOT +//#define HAS_BTT_EXP_MOT 1 + +#if BOTH(HAS_WIRED_LCD, HAS_BTT_EXP_MOT) + #if EITHER(CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY) + #define EXP_MOT_USE_EXP2_ONLY 1 + #else + #error "You can't use both an LCD and a Motor Expansion Module on EXP1/EXP2 at the same time." + #endif +#endif + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Steppers +// +#ifndef E1_STEP_PIN + #define E1_STEP_PIN P0_01 +#endif +#ifndef E1_DIR_PIN + #define E1_DIR_PIN P0_00 +#endif +#ifndef E1_ENABLE_PIN + #define E1_ENABLE_PIN P0_10 +#endif + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#ifndef TEMP_0_PIN + #define TEMP_0_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_0_PIN +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN +#endif + +#if HOTENDS == 1 + #if TEMP_SENSOR_PROBE + #define TEMP_PROBE_PIN TEMP_1_PIN + #elif TEMP_SENSOR_CHAMBER + #define TEMP_CHAMBER_PIN TEMP_1_PIN + #endif +#endif + +// +// Heaters / Fans +// +#ifndef HEATER_0_PIN + #define HEATER_0_PIN P2_07 +#endif +#if HOTENDS == 1 + #ifndef FAN1_PIN + #define FAN1_PIN P2_04 + #endif +#else + #ifndef HEATER_1_PIN + #define HEATER_1_PIN P2_04 + #endif +#endif +#ifndef FAN_PIN + #define FAN_PIN P2_03 +#endif +#ifndef HEATER_BED_PIN + #define HEATER_BED_PIN P2_05 +#endif + +// +// LCD / Controller +// +#if !defined(BEEPER_PIN) && HAS_WIRED_LCD && DISABLED(LCD_USE_I2C_BUZZER) + #define BEEPER_PIN P1_30 // (37) not 5V tolerant +#endif + +// +// SD Support +// +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if SD_CONNECTION_IS(LCD) + #define SD_SCK_PIN P0_15 + #define SD_MISO_PIN P0_17 + #define SD_MOSI_PIN P0_18 +#elif SD_CONNECTION_IS(ONBOARD) + #undef SD_DETECT_PIN + #define SD_DETECT_PIN P0_27 + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #define SD_SS_PIN ONBOARD_SD_CS_PIN +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +#if HAS_BTT_EXP_MOT + + /** _____ _____ + * NC | · · | GND NC | · · | GND + * NC | · · | 1.31 (M1EN) (M2EN) 1.23 | · · | 1.22 (M3EN) + * (M1STP) 0.18 | · · 3.25 (M1DIR) (M1RX) 1.21 | · · 1.20 (M1DIAG) + * (M2DIR) 0.16 | · · | 3.26 (M2STP) (M2RX) 1.19 | · · | 1.18 (M2DIAG) + * (M3DIR) 0.15 | · · | 0.17 (M3STP) (M3RX) 0.28 | · · | 1.30 (M3DIAG) + * ----- ----- + * EXP2 EXP1 + * + * NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN + */ + + // M1 on Driver Expansion Module + #define E2_STEP_PIN EXPA2_05_PIN + #define E2_DIR_PIN EXPA2_06_PIN + #define E2_ENABLE_PIN EXPA2_04_PIN + #if !EXP_MOT_USE_EXP2_ONLY + #define E2_DIAG_PIN EXPA1_06_PIN + #define E2_CS_PIN EXPA1_05_PIN + #if HAS_TMC_UART + #define E2_SERIAL_TX_PIN EXPA1_05_PIN + #define E2_SERIAL_RX_PIN EXPA1_05_PIN + #endif + #endif + + // M2 on Driver Expansion Module + #define E3_STEP_PIN EXPA2_08_PIN + #define E3_DIR_PIN EXPA2_07_PIN + #if !EXP_MOT_USE_EXP2_ONLY + #define E3_ENABLE_PIN EXPA1_03_PIN + #define E3_DIAG_PIN EXPA1_08_PIN + #define E3_CS_PIN EXPA1_07_PIN + #if HAS_TMC_UART + #define E3_SERIAL_TX_PIN EXPA1_07_PIN + #define E3_SERIAL_RX_PIN EXPA1_07_PIN + #endif + #else + #define E3_ENABLE_PIN EXPA2_04_PIN + #endif + + // M3 on Driver Expansion Module + #define E4_STEP_PIN EXPA2_10_PIN + #define E4_DIR_PIN EXPA2_09_PIN + #if !EXP_MOT_USE_EXP2_ONLY + #define E4_ENABLE_PIN EXPA1_04_PIN + #define E4_DIAG_PIN EXPA1_10_PIN + #define E4_CS_PIN EXPA1_09_PIN + #if HAS_TMC_UART + #define E4_SERIAL_TX_PIN EXPA1_09_PIN + #define E4_SERIAL_RX_PIN EXPA1_09_PIN + #endif + #else + #define E4_ENABLE_PIN EXPA2_04_PIN + #endif + +#endif // HAS_BTT_EXP_MOT diff --git a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h new file mode 100644 index 0000000..1970c0c --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h @@ -0,0 +1,168 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "GMARSH X6 REV1" + +// Ignore temp readings during develpment. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Enable 12MHz clock output on P1.27 pin to sync TMC2208 chip clocks +// +#define LPC1768_ENABLE_CLKOUT_12M + +// +// Servos +// +#define SERVO0_PIN P1_26 // PWM1[6] +#define SERVO1_PIN P1_18 // PWM1[1] + +// +// Limit Switches +// +#define X_MIN_PIN P0_00 +#define X_MAX_PIN P0_01 +#define Y_MIN_PIN P0_10 +#define Y_MAX_PIN P0_21 +#define Z_MIN_PIN P2_13 +#define Z_MAX_PIN P2_22 + +// +// Steppers +// + +#define X_STEP_PIN P1_01 +#define X_DIR_PIN P1_04 +#define X_ENABLE_PIN P0_26 + +#define Y_STEP_PIN P1_10 +#define Y_DIR_PIN P1_14 +#define Y_ENABLE_PIN P1_08 + +#define Z_STEP_PIN P1_17 +#define Z_DIR_PIN P4_29 +#define Z_ENABLE_PIN P1_15 + +#define E0_STEP_PIN P0_05 +#define E0_DIR_PIN P2_00 +#define E0_ENABLE_PIN P4_28 + +#define E1_STEP_PIN P2_03 +#define E1_DIR_PIN P2_04 +#define E1_ENABLE_PIN P2_01 + +#define E2_STEP_PIN P2_07 +#define E2_DIR_PIN P2_08 +#define E2_ENABLE_PIN P2_05 + +// +// TMC2208 UART pins +// +#if HAS_TMC_UART + #define X_SERIAL_TX_PIN P1_00 + #define X_SERIAL_RX_PIN P1_00 + #define Y_SERIAL_TX_PIN P1_09 + #define Y_SERIAL_RX_PIN P1_09 + #define Z_SERIAL_TX_PIN P1_16 + #define Z_SERIAL_RX_PIN P1_16 + #define E0_SERIAL_TX_PIN P0_04 + #define E0_SERIAL_RX_PIN P0_04 + #define E1_SERIAL_TX_PIN P2_02 + #define E1_SERIAL_RX_PIN P2_02 + #define E2_SERIAL_TX_PIN P2_06 + #define E2_SERIAL_RX_PIN P2_06 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#else + #error "TMC2208 UART configuration is required for GMarsh X6." +#endif + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_24_A1 // AD0[0] on P0_23 +#define TEMP_BED_PIN P0_23_A0 // AD0[1] on P0_24 + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P1_19 // Not a PWM pin, software PWM required +#define HEATER_0_PIN P3_26 // PWM1[3] +#define FAN_PIN P3_25 // Part cooling fan - connected to PWM1[2] +#define E0_AUTO_FAN_PIN P0_27 // Extruder cooling fan + +// +// Misc. Functions +// +#define LED_PIN P1_31 + +// +// LCD +// +#if IS_RRD_SC + #define BEEPER_PIN P0_19 + #define BTN_EN1 P1_23 + #define BTN_EN2 P1_24 + #define BTN_ENC P1_25 + #define LCD_PINS_RS P0_20 + #define LCD_PINS_ENABLE P0_21 + #define LCD_PINS_D4 P2_11 + #define LCD_PINS_D5 P0_22 + #define LCD_PINS_D6 P1_29 + #define LCD_PINS_D7 P1_28 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif + +// +// SD Support +// + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION LCD +#endif + +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if SD_CONNECTION_IS(LCD) + #define SD_SCK_PIN P0_15 + #define SD_MISO_PIN P0_17 + #define SD_MOSI_PIN P0_18 + #define SD_SS_PIN P0_16 +#elif SD_CONNECTION_IS(ONBOARD) + #undef SD_DETECT_PIN + #define SD_DETECT_PIN P0_27 + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #define SD_SS_PIN ONBOARD_SD_CS_PIN +#endif diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h new file mode 100644 index 0000000..fbddc66 --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -0,0 +1,388 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * MKS SBASE pin assignments + */ + +#if defined(MKS_HAS_LPC1769) && NOT_TARGET(MCU_LPC1769) + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." +#elif !defined(MKS_HAS_LPC1769) && NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS SBASE" +#endif +#ifndef BOARD_WEBSITE_URL + #define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SBASE" +#endif + +#define LED_PIN P1_18 // Used as a status indicator +#define LED2_PIN P1_19 +#define LED3_PIN P1_20 +#define LED4_PIN P1_21 + +// +// Servos +// +#define SERVO0_PIN P1_23 // J8-3 (low jitter) +#define SERVO1_PIN P2_12 // J8-4 +#define SERVO2_PIN P2_11 // J8-5 +#define SERVO3_PIN P4_28 // J8-6 + +// +// Limit Switches - Not Interrupt Capable +// +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22) +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN P4_28 // Connector J8 +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 + +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) +#define TEMP_0_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) +#define TEMP_2_PIN P0_26_A3 // A3 (TH4) + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_06 +#ifndef FAN_PIN + #define FAN_PIN P2_04 +#endif + +// +// Connector J7 +// Note: These pins are all digitally shared with the EXP1/EXP2 Connector. +// Using them with an LCD connected or configured will lead to hangs & crashes. +// + +// 5V +// NC +// GND +#define PIN_P0_17 P0_17 +#define PIN_P0_16 P0_16 +#define PIN_P0_15 P0_15 + +// +// Connector J8 +// + +// GND +#define PIN_P1_22 P1_22 +#define PIN_P1_23 P1_23 // PWM Capable +#define PIN_P2_12 P2_12 // Interrupt Capable +#define PIN_P2_11 P2_11 // Interrupt Capable + +// +// Průša i3 MMU1 (Multi Material Multiplexer) Support +// +#if HAS_PRUSA_MMU1 + #define E_MUX0_PIN P1_23 // J8-3 + #define E_MUX1_PIN P2_12 // J8-4 + #define E_MUX2_PIN P2_11 // J8-5 +#endif + +// +// Misc. Functions +// +#define PS_ON_PIN P0_25 // TH3 Connector + +// +// Ethernet pins +// +#if !IS_ULTIPANEL + #define ENET_MDIO P1_17 // J12-4 + #define ENET_RX_ER P1_14 // J12-6 + #define ENET_RXD1 P1_10 // J12-8 +#endif + +#define ENET_MOC P1_16 // J12-3 +#define REF_CLK P1_15 // J12-5 +#define ENET_RXD0 P1_09 // J12-7 +#define ENET_CRS P1_08 // J12-9 +#define ENET_TX_EN P1_04 // J12-10 +#define ENET_TXD0 P1_00 // J12-11 +#define ENET_TXD1 P1_01 // J12-12 + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if SD_CONNECTION_IS(CUSTOM_CABLE) + + /** + * A custom cable is needed. See the README file in the + * Marlin\src\config\examples\Mks\Sbase directory + * P0.27 is on EXP2 and the on-board SD card's socket. That means it can't be + * used as the SD_DETECT for the LCD's SD card. + * + * The best solution is to use the custom cable to connect the LCD's SD_DETECT + * to a pin NOT on EXP2. + * + * If you can't find a pin to use for the LCD's SD_DETECT then comment out + * SD_DETECT_PIN entirely and remove that wire from the the custom cable. + */ + #define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27) + #define SD_SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) + #define SD_MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) + #define SD_MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9) + #define SD_SS_PIN P0_28 + #define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the + // selected pins are not on a hardware SPI controller +#elif SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD) + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #if SD_CONNECTION_IS(LCD) + // Use standard cable and header, SPI and SD detect are shared with onboard SD card. + // Hardware SPI is used for both SD cards. The detect pin is shared between the + // LCD and onboard SD readers so we disable it. + #define SD_SS_PIN P0_28 + #else + #define SD_DETECT_PIN P0_27 + #define SD_SS_PIN ONBOARD_SD_CS_PIN + #endif +#endif + +/** + * Smart LCD adapter + * + * The Smart LCD adapter can be used for the two 10 pin LCD controllers such as + * REPRAP_DISCOUNT_SMART_CONTROLLER. It can't be used for controllers that use + * DOGLCD_A0, DOGLCD_CS, LCD_PINS_D5, LCD_PINS_D6 or LCD_PINS_D7. A custom cable + * is needed to pick up 5V for the EXP1 connection. + * + * SD card on the LCD uses the same SPI signals as the LCD. This results in garbage/lines + * on the LCD display during accesses of the SD card. The menus/code has been arranged so + * that the garbage/lines are erased immediately after the SD card accesses are completed. + */ + +#if IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_25 // EXP2.3 + #endif + + #if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN P0_28 // EXP2.4 + #endif + +#elif HAS_WIRED_LCD + + #define BEEPER_PIN P1_31 // EXP1.1 + #define BTN_ENC P1_30 // EXP1.2 + #define BTN_EN1 P3_26 // EXP2.5 + #define BTN_EN2 P3_25 // EXP2.3 + #define LCD_PINS_RS P0_16 // EXP1.4 + #define LCD_SDSS P0_28 // EXP2.4 + #define LCD_PINS_ENABLE P0_18 // EXP1.3 + #define LCD_PINS_D4 P0_15 // EXP1.5 + #if ANY(VIKI2, miniVIKI) + #define DOGLCD_SCK SD_SCK_PIN + #define DOGLCD_MOSI SD_MOSI_PIN + #endif + + #if ENABLED(FYSETC_MINI_12864) + /** + * The FYSETC display can NOT use the SCK and MOSI pins on EXP2, so a + * special cable is needed to go between EXP2 on the FYSETC and the + * controller board's EXP2 and J8. It also means that a software SPI + * is needed to drive those pins. + * + * The FYSETC requires mode 3 SPI interface. + * + * Pins 6, 7 & 8 on EXP2 are no connects. That means a second special + * cable will be needed if the RGB LEDs are to be active. + */ + #define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on FYSETC schematic) + #define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on FYSETC schematic) + #define DOGLCD_SCK P2_11 // J8-5 (SCK on FYSETC schematic) + #define DOGLCD_MOSI P4_28 // J8-6 (MOSI on FYSETC schematic) + + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on FYSETC schematic) + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on FYSETC schematic) + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on FYSETC schematic) + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN P2_12 + #endif + + #elif ENABLED(MINIPANEL) + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + #endif + +#endif // HAS_WIRED_LCD + +/** + * Example for trinamic drivers using the J8 connector on MKs Sbase. + * 2130s need 1 pin for each driver. 2208/2209s need 2 pins for serial control. + * This board does not have enough pins to use hardware serial. + */ + +#if HAS_DRIVER(TMC2130) + // J8 + #define X_CS_PIN P1_22 + #define Y_CS_PIN P1_23 + #define Z_CS_PIN P2_12 + #define E0_CS_PIN P2_11 + #define E1_CS_PIN P4_28 + + // Hardware SPI is on EXP2. See if you can make it work: + // https://github.com/makerbase-mks/MKS-SBASE/issues/25 + #define TMC_USE_SW_SPI + #if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P0_03 // AUX1 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P0_02 // AUX1 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P0_26 // TH4 + #endif + #endif + +#endif + +#if MB(MKS_SBASE) && HAS_TMC_UART + + /** + * TMC2208/TMC2209 stepper drivers + * + * The shortage of pins becomes apparent. + * Worst case you may have to give up the LCD + * RX pins need to be interrupt capable + */ + #define X_SERIAL_TX_PIN P1_22 // J8-2 + #define X_SERIAL_RX_PIN P2_12 // J8-4 Interrupt Capable + #define Y_SERIAL_TX_PIN P1_23 // J8-3 + #define Y_SERIAL_RX_PIN P2_11 // J8-5 Interrupt Capable + #define Z_SERIAL_TX_PIN P2_12 // J8-4 + #define Z_SERIAL_RX_PIN P0_25 // TH3 + #define E0_SERIAL_TX_PIN P4_28 // J8-6 + #define E0_SERIAL_RX_PIN P0_26 // TH4 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// UNUSED +#define PIN_P0_27 P0_27 // EXP2/Onboard SD +#define PIN_P0_28 P0_28 // EXP2 +#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) + +/** + * PWMs + * + * There are 6 PWMs. Each PWM can be assigned to one of two pins. + * + * SERVO2 does NOT have a PWM assigned to it. + * + * PWM1.1 P1_18 SERVO3_PIN FIL_RUNOUT_PIN 5V output, PWM + * PWM1.1 P2_00 E0_STEP_PIN + * PWM1.2 P1_20 SERVO0_PIN + * PWM1.2 P2_01 X_STEP_PIN + * PWM1.3 P1_21 SERVO1_PIN J5-1 + * PWM1.3 P2_02 Y_STEP_PIN + * PWM1.4 P1_23 SDSS(SSEL0) J3-5 AUX-3 + * PWM1.4 P2_03 Z_STEP_PIN + * PWM1.5 P1_24 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES + * PWM1.5 P2_04 RAMPS_D9_PIN + * PWM1.6 P1_26 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES + * PWM1.6 P2_05 RAMPS_D10_PIN + */ + +/** + * Special pins + * P1_30 - not 5V tolerant - EXP1 + * P1_31 - not 5V tolerant - EXP1 + * P0_27 - open collector - EXP2 + * P0_28 - open collector - EXP2 + */ + +/** + * Serial Ports + * P0_00 - Port 3 + * P0_01 - SD Card (Onboard) + * P0_10 - Port 2 + * P0_11 - Y_EN/Y_DIR + * P0_15 - Port 1 + * P0_16 - EXP1 + * P0_02 - Port 0 + * P0_03 - AUX1 + * P0_29 - Port -1 + * P0_30 - USB + */ diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h new file mode 100644 index 0000000..b919eca --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -0,0 +1,395 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * MKS SGEN-L pin assignments + */ + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "MKS SGen-L" +#define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SGEN_L" + +// +// Servos +// +#define SERVO0_PIN P1_23 // SERVO P1.23 +#define SERVO1_PIN P2_00 // SERVO P2.0 + +// +// Trinamic Stallguard pins +// +#define X_DIAG_PIN P1_29 // X- +#define Y_DIAG_PIN P1_27 // Y- +#define Z_DIAG_PIN P1_25 // Z- +#define E0_DIAG_PIN P1_28 // X+ +#define E1_DIAG_PIN P1_26 // Y+ + +// +// Limit Switches +// +#ifdef X_STALL_SENSITIVITY + #define X_STOP_PIN X_DIAG_PIN + #if X_HOME_DIR < 0 + #define X_MAX_PIN P1_28 // X+ + #else + #define X_MIN_PIN P1_28 // X+ + #endif +#else + #define X_MIN_PIN P1_29 // X- + #define X_MAX_PIN P1_28 // X+ +#endif + +#ifdef Y_STALL_SENSITIVITY + #define Y_STOP_PIN Y_DIAG_PIN + #if Y_HOME_DIR < 0 + #define Y_MAX_PIN P1_26 // Y+ + #else + #define Y_MIN_PIN P1_26 // Y+ + #endif +#else + #define Y_MIN_PIN P1_27 // Y- + #define Y_MAX_PIN P1_26 // Y+ +#endif + +#ifdef Z_STALL_SENSITIVITY + #define Z_STOP_PIN Z_DIAG_PIN + #if Z_HOME_DIR < 0 + #define Z_MAX_PIN P1_24 // Z+ + #else + #define Z_MIN_PIN P1_24 // Z+ + #endif +#else + #define Z_MIN_PIN P1_25 // Z- + #define Z_MAX_PIN P1_24 // Z+ +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN P1_24 +#endif + +// +// Steppers +// +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_03 +#define X_ENABLE_PIN P2_01 +#ifndef X_CS_PIN + #define X_CS_PIN P1_01 +#endif + +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_08 +#endif + +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_10 +#endif + +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_15 +#endif + +#define E1_STEP_PIN P0_01 +#define E1_DIR_PIN P0_00 +#define E1_ENABLE_PIN P0_10 +#ifndef E1_CS_PIN + #define E1_CS_PIN P1_17 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P4_28 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P0_05 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P0_04 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #define X_SERIAL_TX_PIN P1_04 + #define X_SERIAL_RX_PIN P1_01 + + #define Y_SERIAL_TX_PIN P1_09 + #define Y_SERIAL_RX_PIN P1_08 + + #define Z_SERIAL_TX_PIN P1_14 + #define Z_SERIAL_RX_PIN P1_10 + + #define E0_SERIAL_TX_PIN P1_16 + #define E0_SERIAL_RX_PIN P1_15 + + #define E1_SERIAL_TX_PIN P4_29 + #define E1_SERIAL_RX_PIN P1_17 + + #define Z2_SERIAL_TX_PIN P4_29 + #define Z2_SERIAL_RX_PIN P1_17 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif // HAS_TMC_UART + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_23_A0 // Analog Input A0 (TH1) +#define TEMP_BED_PIN P0_24_A1 // Analog Input A1 (TB) +#define TEMP_1_PIN P0_25_A2 // Analog Input A2 (TH2) + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#if HOTENDS == 1 + #ifndef FAN1_PIN + #define FAN1_PIN P2_06 + #endif +#else + #ifndef HEATER_1_PIN + #define HEATER_1_PIN P2_06 + #endif +#endif +#ifndef FAN_PIN + #define FAN_PIN P2_04 +#endif + +// +// Misc. Functions +// +#define LED_PIN P1_18 // Used as a status indicator +#define LED2_PIN P1_19 +#define LED3_PIN P1_20 +#define LED4_PIN P1_21 + +/** + * _____ _____ + * (BEEPER) 1.31 | · · | 1.30 (BTN_ENC) (MISO) 0.8 | · · | 0.7 (SD_SCK) + * (LCD_EN) 0.18 | · · | 0.16 (LCD_RS) (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2) + * (LCD_D4) 0.15 | · · 0.17 (LCD_D5) (BTN_EN2) 3.26 | · · 0.9 (SD_MOSI) + * (LCD_D6) 1.0 | · · | 1.22 (LCD_D7) (SD_DETECT) 0.27 | · · | RST + * GND | · · | 5V GND | · · | NC + * ----- ----- + * EXP1 EXP2 + */ +#if HAS_WIRED_LCD + + #define BEEPER_PIN P1_31 + #define BTN_ENC P1_30 + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS P1_00 + + #define BTN_EN1 P0_18 + #define BTN_EN2 P0_15 + + #define LCD_PINS_ENABLE P1_22 + #define LCD_PINS_D4 P0_17 + + #elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI + #define TFT_CS_PIN P1_00 + #define TFT_A0_PIN P1_22 + #define TFT_DC_PIN P1_22 + #define TFT_MISO_PIN P0_08 + #define TFT_BACKLIGHT_PIN P0_18 + #define TFT_RESET_PIN P0_16 + + #define LCD_USE_DMA_SPI + + #define TOUCH_INT_PIN P0_17 + #define TOUCH_CS_PIN P0_15 + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 2 + + // Disable any LCD related PINs config + #define LCD_PINS_ENABLE -1 + #define LCD_PINS_RS -1 + + #ifndef TFT_BUFFER_SIZE + #define TFT_BUFFER_SIZE 1200 + #endif + #ifndef TFT_QUEUE_SIZE + #define TFT_QUEUE_SIZE 6144 + #endif + + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + + #elif IS_TFTGLCD_PANEL + + #undef BEEPER_PIN + #undef BTN_ENC + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_25 + #endif + + #else + + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + + #define LCD_SDSS P0_28 + + #if ENABLED(MKS_12864OLED_SSD1306) + + #define LCD_PINS_DC P0_17 + #define DOGLCD_CS P0_16 + #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_SCK P0_15 + #define DOGLCD_MOSI P0_18 + + #define LCD_PINS_RS P1_00 + #define LCD_PINS_D7 P1_22 + #define KILL_PIN -1 // NC + + #else // !MKS_12864OLED_SSD1306 + + #define LCD_PINS_RS P0_16 + + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + + #if ENABLED(FYSETC_MINI_12864) + + #define DOGLCD_CS P0_18 + #define DOGLCD_A0 P0_16 + #define DOGLCD_SCK P0_07 + #define DOGLCD_MOSI P0_09 + + #define LCD_BACKLIGHT_PIN -1 + + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN P0_17 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN P1_00 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN P1_22 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN P0_17 + #endif + + #else // !FYSETC_MINI_12864 + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_CS P0_17 + #define DOGLCD_A0 P1_00 + #endif + + #if IS_ULTIPANEL + #define LCD_PINS_D5 P0_17 + #define LCD_PINS_D6 P1_00 + #define LCD_PINS_D7 P1_22 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif // !FYSETC_MINI_12864 + + #endif // !MKS_12864OLED_SSD1306 + + #endif // !CR10_STOCKDISPLAY + +#endif // HAS_WIRED_LCD + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN P0_27 + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #if SD_CONNECTION_IS(ONBOARD) + #define SD_SS_PIN ONBOARD_SD_CS_PIN + #else + #define SD_SS_PIN P0_28 + #endif +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +// +// Other Pins +// +//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PS_ON_PIN P1_23 // SERVO P1.23 diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h new file mode 100644 index 0000000..6584030 --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -0,0 +1,518 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Re-ARM with RAMPS v1.4 pin assignments + * + * Applies to the following boards: + * + * RAMPS_14_EFB (Hotend, Fan, Bed) + * RAMPS_14_EEB (Hotend0, Hotend1, Bed) + * RAMPS_14_EFF (Hotend, Fan0, Fan1) + * RAMPS_14_EEF (Hotend0, Hotend1, Fan) + * RAMPS_14_SF (Spindle, Controller Fan) + */ + +// Numbers in parentheses () are the corresponding mega2560 pin numbers + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "Re-ARM RAMPS 1.4" + +// +// Servos +// +#define SERVO0_PIN P1_20 // (11) +#define SERVO1_PIN P1_21 // ( 6) also on J5-1 +#define SERVO2_PIN P1_19 // ( 5) +#define SERVO3_PIN P1_18 // ( 4) 5V output + +// +// Limit Switches +// +#define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series +#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups + +// +// Steppers +// +#define X_STEP_PIN P2_01 // (54) +#define X_DIR_PIN P0_11 // (55) +#define X_ENABLE_PIN P0_10 // (38) +#ifndef X_CS_PIN + #define X_CS_PIN P1_01 // ETH +#endif + +#define Y_STEP_PIN P2_02 // (60) +#define Y_DIR_PIN P0_20 // (61) +#define Y_ENABLE_PIN P0_19 // (56) +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_04 // ETH +#endif + +#define Z_STEP_PIN P2_03 // (46) +#define Z_DIR_PIN P0_22 // (48) +#define Z_ENABLE_PIN P0_21 // (62) +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_10 // ETH +#endif + +#define E0_STEP_PIN P2_00 // (26) +#define E0_DIR_PIN P0_05 // (28) +#define E0_ENABLE_PIN P0_04 // (24) +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_14 // ETH +#endif + +#define E1_STEP_PIN P2_08 // (36) +#define E1_DIR_PIN P2_13 // (34) +#define E1_ENABLE_PIN P4_29 // (30) +#ifndef E1_CS_PIN + #define E1_CS_PIN -1 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P1_00 // ETH + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P1_08 // ETH + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P1_09 // ETH + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + + // + // Software serial + // + + // P2_08 E1-Step + // P2_13 E1-Dir + + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN P0_01 + #endif + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN P0_01 + #endif + + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN P0_00 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN P0_00 + #endif + + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN P2_13 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN P2_13 + #endif + + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN P2_08 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN P2_08 + #endif + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_0_PIN +#define TEMP_BED_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_BED_PIN +#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN +#define TEMP_2_PIN P0_26_A3 // A3 - (63) - J5-3 & AUX-2 +#define TEMP_3_PIN P1_30_A4 // A4 - (37) - BUZZER_PIN +//#define TEMP_4_PIN P1_31_A5 // A5 - (49) - SD_DETECT_PIN +//#define ?? P0_03_A6 // A6 - ( 0) - RXD0 - J4-4 & AUX-1 +#define FILWIDTH_PIN P0_02_A7 // A7 - ( 1) - TXD0 - J4-5 & AUX-1 + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HAS_MULTI_HOTEND + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#ifndef MOSFET_D_PIN + #define MOSFET_D_PIN -1 +#endif +#ifndef RAMPS_D8_PIN + #define RAMPS_D8_PIN P2_07 // (8) +#endif +#ifndef RAMPS_D9_PIN + #define RAMPS_D9_PIN P2_04 // (9) +#endif +#ifndef RAMPS_D10_PIN + #define RAMPS_D10_PIN P2_05 // (10) +#endif + +#define HEATER_0_PIN RAMPS_D10_PIN + +#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN RAMPS_D9_PIN +#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN RAMPS_D8_PIN +#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN RAMPS_D8_PIN + #if HOTENDS == 1 + #define FAN1_PIN MOSFET_D_PIN + #else + #define HEATER_1_PIN MOSFET_D_PIN + #endif +#endif + +#ifndef FAN_PIN + #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN RAMPS_D9_PIN + #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN RAMPS_D8_PIN + #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define FAN_PIN P1_18 // (4) IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN + #endif +#endif + +// +// Misc. Functions +// +#define LED_PIN P4_28 // (13) + +// define digital pin 5 for the filament runout sensor. Use the RAMPS 1.4 digital input 5 on the servos connector +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN P1_19 // (5) +#endif + +#define PS_ON_PIN P2_12 // (12) + +#if !defined(MAX6675_SS_PIN) && DISABLED(USE_ZMAX_PLUG) + #define MAX6675_SS_PIN P1_28 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENA_PIN) + #if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // Try to use servo connector + #define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// Use servo pins, if available +// +#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) + #if NUM_SERVOS > 1 + #if ENABLED(SPINDLE_FEATURE) + #error "SPINDLE_FEATURE requires 3 free servo pins." + #else + #error "LASER_FEATURE requires 3 free servo pins." + #endif + #endif + #define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown! + #define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM + #define SPINDLE_DIR_PIN SERVO2_PIN // (5) +#endif + +// +// Průša i3 MK2 Multiplexer Support +// +#if SERIAL_PORT != 0 && SERIAL_PORT_2 != 0 + #define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN + #define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN +#endif +#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN + +/** + * LCD / Controller + * + * All controllers can use J3 and J5 on the Re-ARM board. Custom cabling will be required. + * + * - https://github.com/wolfmanjm/universal-panel-adapter + * - https://panucattdevices.freshdesk.com/support/solutions/articles/1000243195-lcd-display-installation + */ + +/** + * Smart LCD adapter + * + * The Smart LCD adapter can be used for the two 10 pin LCD controllers such as + * REPRAP_DISCOUNT_SMART_CONTROLLER. It can't be used for controllers that use + * DOGLCD_A0, DOGLCD_CS, LCD_PINS_D5, LCD_PINS_D6 or LCD_PINS_D7. A custom cable + * is needed to pick up 5V for the EXP1 connection. + * + * SD card on the LCD uses the same SPI signals as the LCD. This results in garbage/lines + * on the LCD display during accesses of the SD card. The menus/code has been arranged so + * that the garbage/lines are erased immediately after the SD card accesses are completed. + */ + +#if ENABLED(CR10_STOCKDISPLAY) + + // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3. + // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one + // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3. + // Requires REVERSE_ENCODER_DIRECTION in Configuration.h + + #define BEEPER_PIN P2_11 // J3-3 & AUX-4 + + #define BTN_EN1 P0_16 // J3-7 & AUX-4 + #define BTN_EN2 P1_23 // J3-5 & AUX-4 + #define BTN_ENC P3_25 // J3-4 & AUX-4 + + #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) + #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) + #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) + +#elif ENABLED(ZONESTAR_LCD) + + #error "CAUTION! ZONESTAR_LCD on REARM requires wiring modifications. NB. ADCs are not 5V tolerant. Comment out this line to continue." + +#elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_26 // (31) J3-2 & AUX-4 + #endif + + #define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + +#elif HAS_WIRED_LCD + + #if ENABLED(FYSETC_MINI_12864) + #define BEEPER_PIN P1_01 + #define BTN_ENC P1_04 + #else + #define BEEPER_PIN P1_30 // (37) not 5V tolerant + #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + #endif + + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + + #define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 + #define LCD_SDSS P1_23 // (53) J3-5 & AUX-3 + + #if IS_NEWPANEL + #if IS_RRW_KEYPAD + #define SHIFT_OUT_PIN P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK_PIN P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) + #endif + #else + //#define SHIFT_CLK_PIN P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD_PIN P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_OUT_PIN P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_EN_PIN P1_22 // (41) J5-4 & AUX-4 + #endif + + #if ANY(VIKI2, miniVIKI) + //#define LCD_SCREEN_ROT_180 + + #define DOGLCD_CS P0_16 // (16) + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #define DOGLCD_SCK SD_SCK_PIN + #define DOGLCD_MOSI SD_MOSI_PIN + + #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes + #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + + #else + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_SCK P0_15 + #define DOGLCD_MOSI P0_18 + + // EXP1 on LCD adapter is not usable - using Ethernet connector instead + #define DOGLCD_CS P1_09 + #define DOGLCD_A0 P1_14 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN P1_00 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN P1_01 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN P1_08 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN P1_00 + #endif + #else + #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #endif + + #define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers + #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 + #if IS_ULTIPANEL + #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO + #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER + #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + #endif + + #if ENABLED(MINIPANEL) + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + #endif + +#endif // HAS_WIRED_LCD + +// +// Ethernet pins +// +#if !IS_ULTIPANEL + #define ENET_MDIO P1_17 // (71) J12-4 + #define ENET_RX_ER P1_14 // (73) J12-6 + #define ENET_RXD1 P1_10 // (75) J12-8 +#endif +#define ENET_MOC P1_16 // (70) J12-3 +#define REF_CLK P1_15 // (72) J12-5 +#define ENET_RXD0 P1_09 // (74) J12-7 +#define ENET_CRS P1_08 // (76) J12-9 +#define ENET_TX_EN P1_04 // (77) J12-10 +#define ENET_TXD0 P1_00 // (78) J12-11 +#define ENET_TXD1 P1_01 // (79) J12-12 + +// +// SD Support +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card + +#if SD_CONNECTION_IS(LCD) + #define SD_SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 + #define SD_MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 + #define SD_MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 + #define SD_SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin +#elif SD_CONNECTION_IS(ONBOARD) + #undef SD_DETECT_PIN + #define SD_SCK_PIN P0_07 + #define SD_MISO_PIN P0_08 + #define SD_MOSI_PIN P0_09 + #define SD_SS_PIN ONBOARD_SD_CS_PIN +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +/** + * Fast PWMs + * + * The LPC1768's hardware PWM controller has 6 channels. Each channel + * can be setup to either control a dedicated pin directly or to generate + * an interrupt. The direct method's duty cycle is accurate to within a + * a microsecond. The interrupt method's average duty cycle has the + * the same accuracy but the individual cycles can vary because of higher + * priority interrupts. + * + * All Fast PWMs have a 50Hz rate. + * + * The following pins/signals use the direct method. All other pins use the + * the interrupt method. Note that SERVO2_PIN and RAMPS_D8_PIN use the + * interrupt method. + * + * P1_20 (11) SERVO0_PIN + * P1_21 ( 6) SERVO1_PIN J5-1 + * P0_18 ( 4) SERVO3_PIN 5V output + * *P2_04 ( 9) RAMPS_D9_PIN + * *P2_05 (10) RAMPS_D10_PIN + * + * * - If used as a heater driver then a Fast PWM is NOT assigned. If used as + * a fan driver then enabling FAST_PWM_FAN assigns a Fast PWM to it. + */ + + /** + * Special pins + * P1_30 (37) (NOT 5V tolerant) + * P1_31 (49) (NOT 5V tolerant) + * P0_27 (57) (Open collector) + * P0_28 (58) (Open collector) + */ + +/** + * The following mega2560 pins are NOT available in a Re-ARM system: + * + * 7, 17, 22, 23, 25, 27, 29, 32, 39, 40, 42, 43, 44, 45, 47, 64, 65, 66 + */ diff --git a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h new file mode 100644 index 0000000..700e79d --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h @@ -0,0 +1,118 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Selena Compact pin assignments + */ + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "Selena Compact" +#define BOARD_WEBSITE_URL "github.com/Ales2-k/Selena" + +// +// Servos +// +#define SERVO0_PIN P1_23 + +// +// Limit Switches +// +#define X_MIN_PIN P1_28 +#define X_MAX_PIN P1_25 +#define Y_MIN_PIN P2_11 +#define Y_MAX_PIN -1 +#define Z_MIN_PIN P1_27 +#define Z_MAX_PIN -1 +#define Z_PROBE P1_22 + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 + +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) +#define TEMP_0_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) + +// +// Heaters / Fans +// + +#define HEATER_BED_PIN P2_05 +#define HEATER_BED2_PIN P2_04 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_06 +#ifndef FAN_PIN + #define FAN_PIN P1_24 +#endif +#define FAN1_PIN P1_26 + +// +// Display +// + +#if IS_RRD_FG_SC + #define LCD_PINS_RS P0_16 + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + #define LCD_PINS_D5 P1_00 + #define LCD_PINS_D6 P1_01 + #define LCD_PINS_D7 P1_04 + #define BEEPER_PIN P1_31 + + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + #define BTN_ENC P1_30 + + #define SD_DETECT_PIN -1 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // IS_RRD_FG_SC -- cgit v1.2.3