From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit
---
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h | 126 +++++++
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h | 219 +++++++++++
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h | 44 +++
Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h | 266 +++++++++++++
Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h | 30 ++
Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h | 177 +++++++++
Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h | 289 ++++++++++++++
Marlin/src/pins/lpc1769/pins_FLY_CDY.h | 181 +++++++++
Marlin/src/pins/lpc1769/pins_MKS_SGEN.h | 59 +++
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h | 414 +++++++++++++++++++++
Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h | 181 +++++++++
Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h | 182 +++++++++
12 files changed, 2168 insertions(+)
create mode 100644 Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
create mode 100644 Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
create mode 100644 Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h
create mode 100644 Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
create mode 100644 Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h
create mode 100644 Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
create mode 100644 Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
create mode 100644 Marlin/src/pins/lpc1769/pins_FLY_CDY.h
create mode 100644 Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
create mode 100644 Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
create mode 100644 Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
create mode 100644 Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
(limited to 'Marlin/src/pins/lpc1769')
diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
new file mode 100644
index 0000000..adf9085
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
@@ -0,0 +1,126 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Azteeg X5 GT pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "Azteeg X5 GT"
+#define BOARD_WEBSITE_URL "tinyurl.com/yx8tdqa3"
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_23
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN P1_24
+#define X_MAX_PIN P1_27
+#define Y_MIN_PIN P1_25
+#define Y_MAX_PIN P1_28
+#define Z_MIN_PIN P1_26
+#define Z_MAX_PIN P1_29
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_01
+#define X_DIR_PIN P0_11
+#define X_ENABLE_PIN P0_10
+#ifndef X_CS_PIN
+ #define X_CS_PIN P0_10 // BSD2660 default
+#endif
+
+#define Y_STEP_PIN P2_02
+#define Y_DIR_PIN P0_20
+#define Y_ENABLE_PIN P0_19
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN P0_19 // BSD2660 default
+#endif
+
+#define Z_STEP_PIN P2_03
+#define Z_DIR_PIN P0_22
+#define Z_ENABLE_PIN P0_21
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN P0_21 // BSD2660 default
+#endif
+
+#define E0_STEP_PIN P2_00
+#define E0_DIR_PIN P0_05
+#define E0_ENABLE_PIN P0_04
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN P0_04 // BSD2660 default
+#endif
+
+#define E1_STEP_PIN P2_08
+#define E1_DIR_PIN P2_13
+#define E1_ENABLE_PIN P4_29
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN P4_29 // BSD2660 default
+#endif
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
+#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
+#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
+
+//
+// Heaters / Fans
+//
+
+#define HEATER_BED_PIN P2_07
+#define HEATER_0_PIN P2_04
+#define HEATER_1_PIN P2_05
+#ifndef FAN_PIN
+ #define FAN_PIN P0_26
+#endif
+#define FAN1_PIN P1_22
+
+//
+// Display
+//
+
+#if ANY(VIKI2, miniVIKI)
+ #define BEEPER_PIN P1_31
+ #define DOGLCD_A0 P2_06
+ #define DOGLCD_CS P0_16
+
+ #define BTN_EN1 P3_25
+ #define BTN_EN2 P3_26
+ #define BTN_ENC P2_11
+
+ #define SD_DETECT_PIN P1_18
+ #define SDSS P1_21
+
+ #define STAT_LED_RED_PIN P1_19
+ #define STAT_LED_BLUE_PIN P1_20
+#endif
diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
new file mode 100644
index 0000000..fdd6487
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
@@ -0,0 +1,219 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Azteeg X5 MINI pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#ifndef BOARD_INFO_NAME
+ #define BOARD_INFO_NAME "Azteeg X5 MINI"
+#endif
+#define BOARD_WEBSITE_URL "tiny.cc/x5_mini"
+
+//
+// LED
+//
+#define LED_PIN P1_18
+#define LED2_PIN P1_20
+#define LED3_PIN P1_19
+#define LED4_PIN P1_21
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_29
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN P1_24
+#define Y_STOP_PIN P1_26
+#define Z_STOP_PIN P1_28
+
+#ifndef FIL_RUNOUT_PIN
+ #define FIL_RUNOUT_PIN P2_04
+#endif
+
+#ifndef FILWIDTH_PIN
+ #define FILWIDTH_PIN P0_25_A2 // Analog Input (P0_25)
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_01
+#define X_DIR_PIN P0_11
+#define X_ENABLE_PIN P0_10
+
+#define Y_STEP_PIN P2_02
+#define Y_DIR_PIN P0_20
+#define Y_ENABLE_PIN P0_19
+
+#define Z_STEP_PIN P2_03
+#define Z_DIR_PIN P0_22
+#define Z_ENABLE_PIN P0_21
+
+#define E0_STEP_PIN P2_00
+#define E0_DIR_PIN P0_05
+#define E0_ENABLE_PIN P0_04
+
+//
+// DIGIPOT slave addresses (7-bit unshifted)
+//
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x2C
+#endif
+#ifndef DIGIPOT_I2C_ADDRESS_B
+ #define DIGIPOT_I2C_ADDRESS_B 0x2E
+#endif
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
+#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P2_07
+#define HEATER_0_PIN P2_05
+#ifndef FAN_PIN
+ #define FAN_PIN P0_26
+#endif
+#define FAN1_PIN P1_25
+
+//
+// Display
+//
+#if HAS_WIRED_LCD
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
+ // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
+ // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
+ // Requires REVERSE_ENCODER_DIRECTION in Configuration.h
+
+ #define BEEPER_PIN P2_11 // J3-3 & AUX-4
+
+ #define BTN_EN1 P0_16 // J3-7 & AUX-4
+ #define BTN_EN2 P1_23 // J3-5 & AUX-4
+ #define BTN_ENC P3_25 // J3-4 & AUX-4
+
+ #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
+ #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
+ #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
+
+ #else
+
+ #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
+ #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
+ #define BTN_ENC P2_11 // (35) J3-3 & AUX-4
+
+ #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
+ #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
+ #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
+ #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
+ #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
+ #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
+ #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
+
+ #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
+
+ #if IS_RRW_KEYPAD
+ #define SHIFT_OUT_PIN P0_18 // (51) (MOSI) J3-10 & AUX-3
+ #define SHIFT_CLK_PIN P0_15 // (52) (SCK) J3-9 & AUX-3
+ #define SHIFT_LD_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
+ #elif !IS_NEWPANEL
+ //#define SHIFT_OUT_PIN P2_11 // (35) J3-3 & AUX-4
+ //#define SHIFT_CLK_PIN P3_26 // (31) J3-2 & AUX-4
+ //#define SHIFT_LD_PIN P3_25 // (33) J3-4 & AUX-4
+ //#define SHIFT_EN_PIN P1_22 // (41) J5-4 & AUX-4
+ #endif
+
+ #if ANY(VIKI2, miniVIKI)
+ //#define LCD_SCREEN_ROT_180
+
+ #define BEEPER_PIN P1_30 // (37) may change if cable changes
+ #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
+ #define DOGLCD_SCK SD_SCK_PIN
+ #define DOGLCD_MOSI SD_MOSI_PIN
+
+ #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
+ #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
+ #else
+ #if IS_ULTIPANEL
+ #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
+ #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
+ #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
+ #endif
+ #define BEEPER_PIN P1_30 // (37) not 5V tolerant
+ #define DOGLCD_CS P0_16 // (16)
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #endif
+
+ #if ENABLED(MINIPANEL)
+ // GLCD features
+ // Uncomment screen orientation
+ //#define LCD_SCREEN_ROT_90
+ //#define LCD_SCREEN_ROT_180
+ //#define LCD_SCREEN_ROT_270
+ #endif
+
+ #endif
+
+#endif // HAS_WIRED_LCD
+
+//
+// SD Support
+//
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
+#endif
+
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+
+#if SD_CONNECTION_IS(LCD)
+ #define SD_SCK_PIN P0_15
+ #define SD_MISO_PIN P0_17
+ #define SD_MOSI_PIN P0_18
+ #define SD_SS_PIN P1_23
+#elif SD_CONNECTION_IS(ONBOARD)
+ #undef SD_DETECT_PIN
+ #define SD_SCK_PIN P0_07
+ #define SD_MISO_PIN P0_08
+ #define SD_MOSI_PIN P0_09
+ #define SD_SS_PIN ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
+#endif
diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h
new file mode 100644
index 0000000..99ff0fd
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h
@@ -0,0 +1,44 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Azteeg X5 MINI pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "Azteeg X5 MINI WIFI"
+
+//
+// DIGIPOT slave addresses
+//
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x58 // shifted slave address for first DIGIPOT (0x58 <- 0x2C << 1)
+#endif
+#ifndef DIGIPOT_I2C_ADDRESS_B
+ #define DIGIPOT_I2C_ADDRESS_B 0x5C // shifted slave address for second DIGIPOT (0x5C <- 0x2E << 1)
+#endif
+
+#include "pins_AZTEEG_X5_MINI.h"
diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
new file mode 100644
index 0000000..6e498ba
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
@@ -0,0 +1,266 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#ifndef BOARD_INFO_NAME
+ #define BOARD_INFO_NAME "BTT SKR E3 Turbo"
+#endif
+
+// Onboard I2C EEPROM
+#define I2C_EEPROM
+#define MARLIN_EEPROM_SIZE 0x1000 // 4KB (AT24C32)
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_23
+
+//
+// TMC StallGuard DIAG pins
+//
+#define X_DIAG_PIN P1_29 // X-STOP
+#define Y_DIAG_PIN P1_28 // Y-STOP
+#define Z_DIAG_PIN P1_27 // Z-STOP
+#define E0_DIAG_PIN P1_26 // E0DET
+#define E1_DIAG_PIN P1_25 // E1DET
+
+//
+// Limit Switches
+#define X_STOP_PIN X_DIAG_PIN
+#define Y_STOP_PIN Y_DIAG_PIN
+#define Z_STOP_PIN Z_DIAG_PIN
+
+//
+// Z Probe
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN P1_22
+#endif
+
+//
+// Filament Runout Sensor
+//
+#define FIL_RUNOUT_PIN P1_26 // E0DET
+#define FIL_RUNOUT2_PIN P1_25 // E1DET
+
+//
+// Power Supply Control
+//
+#ifndef PS_ON_PIN
+ #define PS_ON_PIN P1_21
+#endif
+
+// LED driving pin
+#ifndef NEOPIXEL_PIN
+ #define NEOPIXEL_PIN P1_24
+#endif
+
+//
+// Power Loss Detection
+//
+#ifndef POWER_LOSS_PIN
+ #define POWER_LOSS_PIN P1_20 // PWRDET
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN P1_04
+#define X_DIR_PIN P1_08
+#define X_ENABLE_PIN P1_00
+#ifndef X_CS_PIN
+ #define X_CS_PIN P1_01
+#endif
+
+#define Y_STEP_PIN P1_14
+#define Y_DIR_PIN P1_15
+#define Y_ENABLE_PIN P1_09
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN P1_10
+#endif
+
+#define Z_STEP_PIN P4_29
+#define Z_DIR_PIN P4_28
+#define Z_ENABLE_PIN P1_16
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN P1_17
+#endif
+
+#define E0_STEP_PIN P2_06
+#define E0_DIR_PIN P2_07
+#define E0_ENABLE_PIN P0_04
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN P0_05
+#endif
+
+#define E1_STEP_PIN P2_11
+#define E1_DIR_PIN P2_12
+#define E1_ENABLE_PIN P0_21
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN P0_22
+#endif
+
+#if HAS_TMC_UART
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+
+ //
+ // Software serial
+ //
+ #define X_SERIAL_TX_PIN P1_01
+ #define X_SERIAL_RX_PIN P1_01
+
+ #define Y_SERIAL_TX_PIN P1_10
+ #define Y_SERIAL_RX_PIN P1_10
+
+ #define Z_SERIAL_TX_PIN P1_17
+ #define Z_SERIAL_RX_PIN P1_17
+
+ #define E0_SERIAL_TX_PIN P0_05
+ #define E0_SERIAL_RX_PIN P0_05
+
+ #define E1_SERIAL_TX_PIN P0_22
+ #define E1_SERIAL_RX_PIN P0_22
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+//
+// TMC Low Power Standby pins
+//
+#define X_STDBY_PIN P3_26
+#define Y_STDBY_PIN P3_25
+#define Z_STDBY_PIN P1_18
+#define E0_STDBY_PIN P1_19
+#define E1_STDBY_PIN P2_13
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN P0_24
+#define TEMP_1_PIN P0_23
+//#define TEMP_2_PIN P1_30 // Onboard thermistor
+#define TEMP_BED_PIN P0_25
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN P2_03 // EXTRUDER 0
+#define HEATER_1_PIN P2_04 // EXTRUDER 1
+#define HEATER_BED_PIN P2_05 // BED
+#define FAN_PIN P2_01
+#define FAN1_PIN P2_02
+
+#ifndef CONTROLLER_FAN_PIN
+ #define CONTROLLER_FAN_PIN FAN1_PIN
+#endif
+
+/**
+ * _____
+ * 5V | 1 2 | GND
+ * (LCD_EN) P0_18 | 3 4 | P0_17 (LCD_RS)
+ * (LCD_D4) P0_15 | 5 6 P0_20 (BTN_EN2)
+ * RESET | 7 8 | P0_19 (BTN_EN1)
+ * (BTN_ENC) P0_16 | 9 10| P2_08 (BEEPER)
+ * -----
+ * EXP
+ */
+
+#define EXPA1_03_PIN P0_18
+#define EXPA1_04_PIN P0_17
+#define EXPA1_05_PIN P0_15
+#define EXPA1_06_PIN P0_20
+#define EXPA1_07_PIN -1
+#define EXPA1_08_PIN P0_19
+#define EXPA1_09_PIN P0_16
+#define EXPA1_10_PIN P2_08
+
+#if HAS_WIRED_LCD
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ #define BEEPER_PIN EXPA1_10_PIN
+
+ #define BTN_EN1 EXPA1_08_PIN
+ #define BTN_EN2 EXPA1_06_PIN
+ #define BTN_ENC EXPA1_09_PIN
+
+ #define LCD_PINS_RS EXPA1_04_PIN
+ #define LCD_PINS_ENABLE EXPA1_03_PIN
+ #define LCD_PINS_D4 EXPA1_05_PIN
+
+ #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
+
+ #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_E3_TURBO.h' for details. Comment out this line to continue."
+
+ #define LCD_PINS_RS EXPA1_05_PIN
+ #define LCD_PINS_ENABLE EXPA1_09_PIN
+ #define LCD_PINS_D4 EXPA1_04_PIN
+ #define LCD_PINS_D5 EXPA1_06_PIN
+ #define LCD_PINS_D6 EXPA1_08_PIN
+ #define LCD_PINS_D7 EXPA1_10_PIN
+ #define ADC_KEYPAD_PIN P1_23 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
+
+ #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
+
+ #define BTN_EN1 EXPA1_08_PIN
+ #define BTN_EN2 EXPA1_06_PIN
+ #define BTN_ENC EXPA1_09_PIN
+
+ #define DOGLCD_CS EXPA1_04_PIN
+ #define DOGLCD_A0 EXPA1_05_PIN
+ #define DOGLCD_SCK EXPA1_10_PIN
+ #define DOGLCD_MOSI EXPA1_03_PIN
+ #define FORCE_SOFT_SPI
+ #define LCD_BACKLIGHT_PIN -1
+
+ #else
+
+ #error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BTT_SKR_E3_TURBO."
+
+ #endif
+
+#endif // HAS_WIRED_LCD
+
+//
+// SD Support
+//
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
+#endif
+
+#if SD_CONNECTION_IS(ONBOARD)
+ #define SD_DETECT_PIN P2_00
+ #define SD_SCK_PIN P0_07
+ #define SD_MISO_PIN P0_08
+ #define SD_MOSI_PIN P0_09
+ #define SD_SS_PIN P0_06
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "SD CUSTOM_CABLE is not compatible with SKR E3 Turbo."
+#endif
+
+#define ON_BOARD_SPI_DEVICE 1 // SPI1
diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h
new file mode 100644
index 0000000..a751286
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h
@@ -0,0 +1,30 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#define BOARD_INFO_NAME "BTT SKR V1.4 TURBO"
+#define SKR_HAS_LPC1769
+
+//
+// Include SKR 1.4 pins
+//
+#include "../lpc1768/pins_BTT_SKR_V1_4.h"
diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
new file mode 100644
index 0000000..d66ffbe
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
@@ -0,0 +1,177 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Cohesion3D Mini pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "Cohesion3D Mini"
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_23
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
+#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
+#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
+#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
+#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
+#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_00
+#define X_DIR_PIN P0_05
+#define X_ENABLE_PIN P0_04
+#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
+
+#define Y_STEP_PIN P2_01
+#define Y_DIR_PIN P0_11
+#define Y_ENABLE_PIN P0_10
+#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
+
+#define Z_STEP_PIN P2_02
+#define Z_DIR_PIN P0_20
+#define Z_ENABLE_PIN P0_19
+#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
+
+#define E0_STEP_PIN P2_03
+#define E0_DIR_PIN P0_22
+#define E0_ENABLE_PIN P0_21
+#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
+
+//
+// Default pins for TMC software SPI
+//
+#if ENABLED(TMC_USE_SW_SPI)
+ #ifndef TMC_SW_MOSI
+ #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
+ #endif
+ #ifndef TMC_SW_MISO
+ #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
+ #endif
+ #ifndef TMC_SW_SCK
+ #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
+ #endif
+#endif
+
+//
+// Analog Inputs
+// 3.3V max when defined as an analog input
+//
+#define TEMP_0_PIN P0_23_A0 // P0_23
+#define TEMP_BED_PIN P0_24_A1 // P0_24
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P2_05
+#define HEATER_0_PIN P2_07 // FET 1
+#ifndef FAN_PIN
+ #define FAN_PIN P2_06 // FET 3
+#endif
+
+//
+// Auto fans
+//
+#define AUTO_FAN_PIN P2_04 // FET 4
+#ifndef E0_AUTO_FAN_PIN
+ #define E0_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+#ifndef E1_AUTO_FAN_PIN
+ #define E1_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+#ifndef E2_AUTO_FAN_PIN
+ #define E2_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+
+//
+// Misc. Functions
+//
+#define LED_PIN P4_28 // Play LED
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER
+ #undef HEATER_0_PIN
+ #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
+ #undef HEATER_BED_PIN
+ #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
+ #undef FAN_PIN
+ #define SPINDLE_DIR_PIN P2_06 // FET 3
+#endif
+
+//
+// LCD / Controller
+//
+// LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
+// defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
+//
+// A remote SD card is currently not supported because the pins routed to the EXP2
+// connector are shared with the onboard SD card, and Marlin does not support reading
+// G-code files from the onboard SD card.
+//
+#if HAS_WIRED_LCD
+
+ #define BEEPER_PIN P0_27 // EXP2-7 - open drain
+
+ #define BTN_EN1 P3_26 // EXP2-5
+ #define BTN_EN2 P3_25 // EXP2-3
+ #define BTN_ENC P1_30 // EXP1-2
+
+ #define LCD_PINS_RS P0_16 // EXP1-4
+ #define LCD_SDSS P0_28 // EXP2-4
+ #define LCD_PINS_ENABLE P0_18 // EXP1-3
+ #define LCD_PINS_D4 P0_15 // EXP1-5
+
+ #define KILL_PIN P2_11 // EXP2-10
+
+ #if ENABLED(SDSUPPORT)
+ #error "SDSUPPORT is not currently supported by the Cohesion3D boards"
+ #endif
+
+#endif // HAS_WIRED_LCD
+
+//
+// Ethernet pins
+//
+#define ENET_MDIO P1_17
+#define ENET_RX_ER P1_14
+#define ENET_RXD1 P1_10
+#define ENET_MOC P1_16
+#define REF_CLK P1_15
+#define ENET_RXD0 P1_09
+#define ENET_CRS P1_08
+#define ENET_TX_EN P1_04
+#define ENET_TXD0 P1_00
+#define ENET_TXD1 P1_01
diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
new file mode 100644
index 0000000..edf13ce
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
@@ -0,0 +1,289 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Cohesion3D ReMix pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "Cohesion3D ReMix"
+
+//
+// Servos
+//
+#define SERVO0_PIN P2_04
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
+#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
+#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
+#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
+#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
+#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN P1_29
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_00
+#define X_DIR_PIN P0_05
+#define X_ENABLE_PIN P0_04
+#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
+
+#define Y_STEP_PIN P2_01
+#define Y_DIR_PIN P0_11
+#define Y_ENABLE_PIN P0_10
+#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
+
+#define Z_STEP_PIN P2_02
+#define Z_DIR_PIN P0_20
+#define Z_ENABLE_PIN P0_19
+#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
+
+#define E0_STEP_PIN P2_03
+#define E0_DIR_PIN P0_22
+#define E0_ENABLE_PIN P0_21
+#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
+
+#define E1_STEP_PIN P2_08
+#define E1_DIR_PIN P2_13
+#define E1_ENABLE_PIN P4_29
+#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14
+
+#define E2_STEP_PIN P1_20
+#define E2_DIR_PIN P1_19
+#define E2_ENABLE_PIN P1_21
+#define E2_CS_PIN P1_18 // FET 6
+
+//
+// Default pins for TMC software SPI
+//
+#if ENABLED(TMC_USE_SW_SPI)
+ #ifndef TMC_SW_MOSI
+ #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
+ #endif
+ #ifndef TMC_SW_MISO
+ #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
+ #endif
+ #ifndef TMC_SW_SCK
+ #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
+ #endif
+#endif
+
+//
+// Analog Inputs
+// 3.3V max when defined as an analog input
+//
+#define TEMP_0_PIN P0_23_A0
+#define TEMP_BED_PIN P0_24_A1
+#define TEMP_1_PIN P0_25_A2
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+ #define FILWIDTH_PIN P0_26_A3
+#else
+ #define TEMP_2_PIN P0_26_A3
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P2_05
+#define HEATER_0_PIN P2_07 // FET 1
+#define HEATER_1_PIN P1_23 // FET 2
+#define HEATER_2_PIN P1_22 // FET 3
+#ifndef FAN_PIN
+ #define FAN_PIN P2_06 // FET 4
+#endif
+
+//
+// Auto fans
+//
+#if HOTENDS == 3
+ #define AUTO_FAN_PIN P1_18 // FET 6
+#else
+ #define AUTO_FAN_PIN P1_22 // FET 3
+#endif
+#ifndef E0_AUTO_FAN_PIN
+ #define E0_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+#ifndef E1_AUTO_FAN_PIN
+ #define E1_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+#ifndef E2_AUTO_FAN_PIN
+ #define E2_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+
+//
+// Misc. Functions
+//
+#define LED_PIN P4_28 // Play LED
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER
+ #undef HEATER_0_PIN
+ #undef HEATER_BED_PIN
+ #undef FAN_PIN
+ #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
+ #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
+ #define SPINDLE_DIR_PIN P2_06 // FET 4
+#endif
+
+//
+// LCD / Controller
+//
+// LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
+// defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
+//
+// A remote SD card is currently not supported because the pins routed to the EXP2
+// connector are shared with the onboard SD card, and Marlin does not support that
+// hardware configuration.
+//
+
+#if ENABLED(FYSETC_MINI_12864)
+
+ #define FORCE_SOFT_SPI // REQUIRED - results in LCD soft SPI mode 3
+
+ #define BEEPER_PIN P1_31 // EXP1-1
+ #define BTN_ENC P1_30 // EXP1-2
+ #define DOGLCD_CS P0_18 // EXP1-3
+ #define DOGLCD_A0 P0_16 // EXP1-4
+ #define LCD_RESET_PIN P0_15 // EXP1-5
+
+ // A custom cable is REQUIRED for EXP2 cable because the SCK & MOSI on the card's EXP2 are dedicated
+ // to the onboard SD card. All required EXP2 signals come from the Ethernet connector. Pin 1 of this
+ // connector is the one nearest the motor power connector.
+ #define DOGLCD_SCK P1_17 // EXP2-2 => Ethernet pin 5 (bottom, 3 from left)
+ #define BTN_EN2 P1_09 // EXP2-3 => Ethernet pin 9 (bottom, 5 from left)
+ #define BTN_EN1 P1_04 // EXP2-5 => Ethernet pin 11 (bottom, 6 from left)
+ #define DOGLCD_MOSI P1_01 // EXP2-6 => Ethernet pin 13 (bottom, 7 from left)
+
+ // A custom EXP1 cable is required colored LEDs. Pins 1-5, 9, 10 of the cable go to pins 1-5, 9, 10
+ // on the board's EXP1 connector. Pins 6, 7, and 8 of the EXP1 cable go to the Ethernet connector.
+ // Rev 1.2 displays do NOT require the RGB LEDs. 2.0 and 2.1 displays do require RGB.
+ #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN P1_10 // EXP1-7 => Ethernet pin 10 (top row, 5 from left)
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN P1_00 // EXP1-8 => Ethernet pin 12 (top row, 6 from left)
+ #endif
+ #elif ENABLED(FYSETC_MINI_12864_2_1)
+ #define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
+ #endif
+
+#elif HAS_WIRED_LCD
+
+ #define BEEPER_PIN P1_31 // EXP1-1
+ //#define SD_DETECT_PIN P0_27 // EXP2-7
+
+ #define BTN_EN1 P3_26 // EXP2-5
+ #define BTN_EN2 P3_25 // EXP2-3
+ #define BTN_ENC P1_30 // EXP1-2
+
+ #define LCD_PINS_RS P0_16 // EXP1-4
+ #define LCD_SDSS P0_28 // EXP2-4
+ #define LCD_PINS_ENABLE P0_18 // EXP1-3
+ #define LCD_PINS_D4 P0_15 // EXP1-5
+
+ #define KILL_PIN P2_11 // EXP2-10
+
+#endif // HAS_WIRED_LCD
+
+//
+// SD Support
+//
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
+#endif
+
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+
+#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
+ #define SD_SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
+ #define SD_MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
+ #define SD_MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
+ #if SD_CONNECTION_IS(LCD)
+ #define SD_SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
+ #else
+ #undef SD_DETECT_PIN
+ #define SD_SS_PIN ONBOARD_SD_CS_PIN
+ #endif
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
+#endif
+
+//
+// Ethernet pins
+//
+//#define ENET_MDIO P1_17 // Ethernet pin 5 (bottom, 3 from left)
+//#define ENET_RX_ER P1_14
+//#define ENET_RXD1 P1_10 // Ethernet pin 10 (top row, 5 from left)
+//#define ENET_MOC P1_16 // Ethernet pin 6 (top row, 3 from left)
+//#define REF_CLK P1_15
+//#define ENET_RXD0 P1_09 // Ethernet pin 9 (bottom, 5 from left)
+//#define ENET_CRS P1_08 // Ethernet pin 8 (top row, 4 from left) - INPUT ONLY
+//#define ENET_TX_EN P1_04 // Ethernet pin 11 (bottom, 6 from left)
+//#define ENET_TXD0 P1_00 // Ethernet pin 12 (top row, 6 from left)
+//#define ENET_TXD1 P1_01 // Ethernet pin 13 (bottom, 7 from left)
+
+/**
+ * EXP1 pins
+ * 1 - P1_31
+ * 2 - P1_30
+ * 3 - P0_18
+ * 4 - P0_16
+ * 5 - P0_15
+ * 6 - N/C
+ * 7 - N/C
+ * 8 - P0_27 (also on EXP2-7)
+ * 9 - GND
+ * 10 - +5V
+ *
+ *
+ * EXP2 pins
+ * 1 - P0_08
+ * 2 - P0_07
+ * 3 - P3_26
+ * 4 - P0_28
+ * 5 - P3_25
+ * 6 - P0_09
+ * 7 - P0_27 (also on EXP1_8)
+ * 8 - P2_11
+ * 9 - GND
+ * 10 - N/C
+ */
diff --git a/Marlin/src/pins/lpc1769/pins_FLY_CDY.h b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h
new file mode 100644
index 0000000..3982d76
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h
@@ -0,0 +1,181 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "FLY-CDY"
+#define BOARD_WEBSITE_URL "github.com/FLYmaker/FLY-CDY"
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_26
+
+//
+// Limit Switches
+//
+
+#define X_MIN_PIN P1_29 // X-
+#define X_MAX_PIN P1_28 // X+
+#define Y_MIN_PIN P1_27 // Y-
+#define Y_MAX_PIN P1_25 // Y+
+#define Z_MIN_PIN P1_22 // Z-
+#define Z_MAX_PIN P0_27 // Z+
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_00
+#define X_DIR_PIN P1_01
+#define X_ENABLE_PIN P1_00
+#ifndef X_CS_PIN
+ #define X_CS_PIN P1_04
+#endif
+
+#define Y_STEP_PIN P2_01
+#define Y_DIR_PIN P1_09
+#define Y_ENABLE_PIN P1_08
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN P1_10
+#endif
+
+#define Z_STEP_PIN P2_02
+#define Z_DIR_PIN P1_15
+#define Z_ENABLE_PIN P1_14
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN P1_16
+#endif
+
+#define E0_STEP_PIN P2_03
+#define E0_DIR_PIN P4_29
+#define E0_ENABLE_PIN P1_17
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN P4_28
+#endif
+
+#define E1_STEP_PIN P2_04
+#define E1_DIR_PIN P2_11
+#define E1_ENABLE_PIN P0_04
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN P2_12
+#endif
+
+#define E2_STEP_PIN P2_05
+#define E2_DIR_PIN P0_11
+#define E2_ENABLE_PIN P2_13
+#ifndef E2_CS_PIN
+ #define E2_CS_PIN P0_10
+#endif
+
+//
+// Software SPI pins for TMC2130 stepper drivers
+//
+#if ENABLED(TMC_USE_SW_SPI)
+ #ifndef TMC_SW_MOSI
+ #define TMC_SW_MOSI P0_20
+ #endif
+ #ifndef TMC_SW_MISO
+ #define TMC_SW_MISO P0_19
+ #endif
+ #ifndef TMC_SW_SCK
+ #define TMC_SW_SCK P0_21
+ #endif
+#endif
+
+#if HAS_TMC_UART
+ #define X_SERIAL_TX_PIN P1_04
+ #define X_SERIAL_RX_PIN P1_04
+
+ #define Y_SERIAL_TX_PIN P1_10
+ #define Y_SERIAL_RX_PIN P1_10
+
+ #define Z_SERIAL_TX_PIN P1_16
+ #define Z_SERIAL_RX_PIN P1_16
+
+ #define E0_SERIAL_TX_PIN P4_28
+ #define E0_SERIAL_RX_PIN P4_28
+
+ #define E1_SERIAL_TX_PIN P2_12
+ #define E1_SERIAL_RX_PIN P2_12
+
+ #define E2_SERIAL_TX_PIN P0_10
+ #define E2_SERIAL_RX_PIN P0_10
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN P0_26_A3 // (T4)
+#define TEMP_1_PIN P0_25_A2 // (T3)
+#define TEMP_2_PIN P0_24_A1 // (T2)
+#define TEMP_BED_PIN P0_23_A0 // (T1)
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P3_26
+#define HEATER_0_PIN P3_25
+#define HEATER_1_PIN P1_20
+#define HEATER_2_PIN P1_23
+#ifndef FAN_PIN
+ #define FAN_PIN P1_18
+#endif
+#define FAN1_PIN P1_21
+#define FAN2_PIN P1_24
+
+//
+// LCD / Controller
+//
+#define BEEPER_PIN P2_07
+#define LCD_PINS_RS P2_10
+#define LCD_PINS_ENABLE P0_22
+#define LCD_PINS_D4 P1_19
+#define LCD_PINS_D5 P2_08
+#define LCD_PINS_D6 P1_30
+#define LCD_PINS_D7 P1_31
+#define BTN_EN1 P0_00
+#define BTN_EN2 P0_01
+#define BTN_ENC P0_28
+
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
+#endif
+
+#if SD_CONNECTION_IS(ONBOARD)
+ #define SD_SS_PIN P0_06
+ #define SD_SCK_PIN P0_07
+ #define SD_MISO_PIN P0_08
+ #define SD_MOSI_PIN P0_09
+ #define SD_DETECT_PIN P0_05
+#elif SD_CONNECTION_IS(LCD)
+ #define SD_SCK_PIN P0_15
+ #define SD_MISO_PIN P0_17
+ #define SD_MOSI_PIN P0_18
+ #define SD_SS_PIN P0_16
+ #define SD_DETECT_PIN P2_06
+#endif
diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
new file mode 100644
index 0000000..d675499
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
@@ -0,0 +1,59 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * MKS SGen pin assignments
+ *
+ * The pins diagram can be found and the following URL:
+ * https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "MKS SGen"
+#define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SGEN"
+
+#define MKS_HAS_LPC1769
+#include "../lpc1768/pins_MKS_SBASE.h"
+
+#if HAS_TMC_UART
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ */
+
+ #define X_SERIAL_TX_PIN P1_22 // J8-2
+ #define X_SERIAL_RX_PIN P1_22 // J8-2
+ #define Y_SERIAL_TX_PIN P1_23 // J8-3
+ #define Y_SERIAL_RX_PIN P1_23 // J8-3
+ #define Z_SERIAL_TX_PIN P2_12 // J8-4
+ #define Z_SERIAL_RX_PIN P2_12 // J8-4
+ #define E0_SERIAL_TX_PIN P2_11 // J8-5
+ #define E0_SERIAL_RX_PIN P2_11 // J8-5
+ #define E1_SERIAL_TX_PIN P4_28 // J8-6
+ #define E1_SERIAL_RX_PIN P4_28 // J8-6
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
new file mode 100644
index 0000000..79c79c5
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
@@ -0,0 +1,414 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * MKS SGen pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "MKS SGEN_L V2"
+#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
+
+//
+// EEPROM, MKS SGEN_L V2.0 hardware has 4K EEPROM on the board
+//
+#if NO_EEPROM_SELECTED
+ //#define SDCARD_EEPROM_EMULATION
+ //#define I2C_EEPROM // AT24C32
+ #define FLASH_EEPROM_EMULATION
+ #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
+#endif
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_23 // SERVO P1.23
+#define SERVO1_PIN P2_00 // SERVO P2.0
+
+//
+// Trinamic Stallguard pins, can connect or disconnect by jumpers cap on the board
+//
+#define X_DIAG_PIN P1_29 // X-
+#define Y_DIAG_PIN P1_27 // Y-
+#define Z_DIAG_PIN P1_25 // Z-
+#define E0_DIAG_PIN P1_28 // X+
+#define E1_DIAG_PIN P1_26 // Y+
+
+//
+// Limit Switches
+//
+#if X_STALL_SENSITIVITY
+ #define X_STOP_PIN X_DIAG_PIN
+ #if X_HOME_DIR < 0
+ #define X_MAX_PIN P1_28 // X+
+ #else
+ #define X_MIN_PIN P1_28 // X+
+ #endif
+#else
+ #define X_MIN_PIN P1_29 // X-
+ #define X_MAX_PIN P1_28 // X+
+#endif
+
+#if Y_STALL_SENSITIVITY
+ #define Y_STOP_PIN Y_DIAG_PIN
+ #if Y_HOME_DIR < 0
+ #define Y_MAX_PIN P1_26 // Y+
+ #else
+ #define Y_MIN_PIN P1_26 // Y+
+ #endif
+#else
+ #define Y_MIN_PIN P1_27 // Y-
+ #define Y_MAX_PIN P1_26 // Y+
+#endif
+
+#if Z_STALL_SENSITIVITY
+ #define Z_STOP_PIN Z_DIAG_PIN
+ #if Z_HOME_DIR < 0
+ #define Z_MAX_PIN P1_24 // Z+
+ #else
+ #define Z_MIN_PIN P1_24 // Z+
+ #endif
+#else
+ #define Z_MIN_PIN P1_25 // Z-
+ #define Z_MAX_PIN P1_24 // Z+
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN P1_24
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_02
+#define X_DIR_PIN P2_03
+#define X_ENABLE_PIN P2_01
+#ifndef X_CS_PIN
+ #define X_CS_PIN P1_01
+#endif
+
+#define Y_STEP_PIN P0_19
+#define Y_DIR_PIN P0_20
+#define Y_ENABLE_PIN P2_08
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN P1_08
+#endif
+
+#define Z_STEP_PIN P0_22
+#define Z_DIR_PIN P2_11
+#define Z_ENABLE_PIN P0_21
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN P1_10
+#endif
+
+#define E0_STEP_PIN P2_13
+#define E0_DIR_PIN P0_11
+#define E0_ENABLE_PIN P2_12
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN P1_15
+#endif
+
+#define E1_STEP_PIN P1_09
+#define E1_DIR_PIN P1_14
+#define E1_ENABLE_PIN P0_10
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN P1_17
+#endif
+
+//
+// Software SPI pins for TMC2130 stepper drivers
+//
+#if ENABLED(TMC_USE_SW_SPI)
+ #ifndef TMC_SW_MOSI
+ #define TMC_SW_MOSI P1_16
+ #endif
+ #ifndef TMC_SW_MISO
+ #define TMC_SW_MISO P0_05
+ #endif
+ #ifndef TMC_SW_SCK
+ #define TMC_SW_SCK P0_04
+ #endif
+#endif
+
+#if HAS_TMC_UART
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial1
+ //#define X2_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Y2_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define Z2_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+ //#define E1_HARDWARE_SERIAL Serial1
+ //#define E2_HARDWARE_SERIAL Serial1
+ //#define E3_HARDWARE_SERIAL Serial1
+ //#define E4_HARDWARE_SERIAL Serial1
+
+ //
+ // Software serial
+ //
+ #define X_SERIAL_TX_PIN P1_01
+ #define X_SERIAL_RX_PIN P1_01
+ #define Y_SERIAL_TX_PIN P1_08
+ #define Y_SERIAL_RX_PIN P1_08
+ #define Z_SERIAL_TX_PIN P1_10
+ #define Z_SERIAL_RX_PIN P1_10
+ #define E0_SERIAL_TX_PIN P1_15
+ #define E0_SERIAL_RX_PIN P1_15
+ #define E1_SERIAL_TX_PIN P1_17
+ #define E1_SERIAL_RX_PIN P1_17
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif // HAS_TMC_UART
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_0_PIN P0_23_A0 // Analog Input A0 (TH1)
+#define TEMP_BED_PIN P0_24_A1 // Analog Input A1 (TB)
+#define TEMP_1_PIN P0_25_A2 // Analog Input A2 (TH2)
+#define TEMP_2_PIN P0_26_A3 // Analog Input A3 (P0.26, No pull up)
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P2_05
+#define HEATER_0_PIN P2_07
+#if HAS_MULTI_HOTEND
+ #ifndef HEATER_1_PIN
+ #define HEATER_1_PIN P2_06
+ #endif
+#else
+ #ifndef FAN2_PIN
+ #define FAN2_PIN P2_06 // HE1 for FAN3
+ #endif
+#endif
+#ifndef FAN_PIN
+ #define FAN_PIN P2_04 // FAN1
+#endif
+#ifndef FAN1_PIN
+ #define FAN1_PIN P1_04 // FAN2
+#endif
+
+//
+// Misc. Functions
+//
+#define LED_PIN P1_18 // Used as a status indicator
+
+//
+// RGB LED
+//
+#if ENABLED(RGB_LED)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN P1_19
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN P1_20
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN P1_21
+ #endif
+#else
+ #define LED2_PIN P1_19 // Initialized by HAL/LPC1768/main.cpp
+ #define LED3_PIN P1_20
+ #define LED4_PIN P1_21
+#endif
+
+/**
+ * _____ _____
+ * (BEEPER) 1.31 | · · | 1.30 (BTN_ENC) (MISO) 0.8 | · · | 0.7 (SD_SCK)
+ * (LCD_EN) 0.18 | · · | 0.16 (LCD_RS) (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2)
+ * (LCD_D4) 0.15 | · · | 0.17 (LCD_D5) (BTN_EN2) 3.26 | · · | 0.9 (SD_MOSI)
+ * (LCD_D6) 1.0 | · · | 1.22 (LCD_D7) (SD_DETECT) 0.27 | · · | RST
+ * GND | · · | 5V GND | · · | NC
+ * ----- -----
+ * EXP1 EXP2
+ */
+#if IS_TFTGLCD_PANEL
+
+ #if ENABLED(TFTGLCD_PANEL_SPI)
+ #define TFTGLCD_CS P3_25
+ #endif
+
+ #define SD_DETECT_PIN P0_27
+
+#elif HAS_WIRED_LCD
+
+ #define BEEPER_PIN P1_31
+ #define BTN_ENC P1_30
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ #define LCD_PINS_RS P1_00
+
+ #define BTN_EN1 P0_18
+ #define BTN_EN2 P0_15
+
+ #define LCD_PINS_ENABLE P1_22
+ #define LCD_PINS_D4 P0_17
+
+ #else
+
+ #define BTN_EN1 P3_25
+ #define BTN_EN2 P3_26
+
+ #define LCD_SDSS P0_28
+
+ #if ENABLED(MKS_12864OLED_SSD1306)
+
+ #define LCD_PINS_DC P0_17
+ #define DOGLCD_CS P0_16
+ #define DOGLCD_A0 LCD_PINS_DC
+ #define DOGLCD_SCK P0_15
+ #define DOGLCD_MOSI P0_18
+
+ #define LCD_PINS_RS P1_00
+ #define LCD_PINS_D7 P1_22
+ #define KILL_PIN -1 // NC
+
+ #elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
+ #define TFT_CS_PIN P1_00
+ #define TFT_A0_PIN P1_22
+ #define TFT_DC_PIN P1_22
+ #define TFT_MISO_PIN P0_08
+ #define TFT_BACKLIGHT_PIN P0_18
+ #define TFT_RESET_PIN P0_16
+
+ #define LCD_USE_DMA_SPI
+
+ #define TOUCH_INT_PIN P0_17
+ #define TOUCH_CS_PIN P0_15
+ #define TOUCH_BUTTONS_HW_SPI
+ #define TOUCH_BUTTONS_HW_SPI_DEVICE 2
+
+ // Disable any LCD related PINs config
+ #define LCD_PINS_ENABLE -1
+ #define LCD_PINS_RS -1
+
+ #ifndef TFT_BUFFER_SIZE
+ #define TFT_BUFFER_SIZE 1200
+ #endif
+ #ifndef TFT_QUEUE_SIZE
+ #define TFT_QUEUE_SIZE 6144
+ #endif
+
+ #else // !MKS_12864OLED_SSD1306
+
+ #define LCD_PINS_RS P0_16
+
+ #define LCD_PINS_ENABLE P0_18
+ #define LCD_PINS_D4 P0_15
+
+ #if ENABLED(FYSETC_MINI_12864)
+
+ #define DOGLCD_CS P0_18
+ #define DOGLCD_A0 P0_16
+ #define DOGLCD_SCK P0_07
+ #define DOGLCD_MOSI P1_20
+
+ #define LCD_BACKLIGHT_PIN -1
+
+ #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
+ // results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+ #define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally.
+
+ #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN P0_17
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN P1_00
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN P1_22
+ #endif
+ #elif ENABLED(FYSETC_MINI_12864_2_1)
+ #define NEOPIXEL_PIN P0_17
+ #endif
+
+ #else // !FYSETC_MINI_12864
+
+ #if ENABLED(MKS_MINI_12864)
+ #define DOGLCD_CS P0_17
+ #define DOGLCD_A0 P1_00
+ #endif
+
+ #if IS_ULTIPANEL
+ #define LCD_PINS_D5 P0_17
+ #define LCD_PINS_D6 P1_00
+ #define LCD_PINS_D7 P1_22
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #endif
+
+ #endif // !FYSETC_MINI_12864
+
+ #endif // !MKS_12864OLED_SSD1306
+
+ #endif // !CR10_STOCKDISPLAY
+
+#endif // HAS_WIRED_LCD
+
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
+#endif
+
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+
+#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
+ #define SD_DETECT_PIN P0_27
+ #define SD_SCK_PIN P0_07
+ #define SD_MISO_PIN P0_08
+ #define SD_MOSI_PIN P0_09
+ #if SD_CONNECTION_IS(ONBOARD)
+ #define SD_SS_PIN ONBOARD_SD_CS_PIN
+ #else
+ #define SD_SS_PIN P0_28
+ #endif
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
+#endif
+
+//
+// Other Pins
+//
+//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
+//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
+//#define PS_ON_PIN P1_23 // SERVO P1.23
diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
new file mode 100644
index 0000000..c5ce3f8
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
@@ -0,0 +1,181 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Smoothieboard pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "Smoothieboard"
+#define BOARD_WEBSITE_URL "smoothieware.org/smoothieboard"
+
+//
+// Servos
+//
+#define SERVO0_PIN P1_23
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN P1_24
+#define X_MAX_PIN P1_25
+#define Y_MIN_PIN P1_26
+#define Y_MAX_PIN P1_27
+#define Z_MIN_PIN P1_28
+#define Z_MAX_PIN P1_29
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_00
+#define X_DIR_PIN P0_05
+#define X_ENABLE_PIN P0_04
+
+#define Y_STEP_PIN P2_01
+#define Y_DIR_PIN P0_11
+#define Y_ENABLE_PIN P0_10
+
+#define Z_STEP_PIN P2_02
+#define Z_DIR_PIN P0_20
+#define Z_ENABLE_PIN P0_19
+
+#define E0_STEP_PIN P2_03
+#define E0_DIR_PIN P0_22
+#define E0_ENABLE_PIN P0_21
+
+#define E1_STEP_PIN P2_08
+#define E1_DIR_PIN P2_13
+#define E1_ENABLE_PIN P4_29
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_0_PIN P0_23_A0 // (T1)
+#define TEMP_BED_PIN P0_24_A1 // (T2)
+#define TEMP_1_PIN P0_25_A2 // (T3)
+#define TEMP_2_PIN P0_26_A3 // (T4)
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P2_05
+#define HEATER_0_PIN P2_07
+#define HEATER_1_PIN P1_23
+#ifndef FAN_PIN
+ #define FAN_PIN P2_06
+#endif
+#define FAN1_PIN P2_04
+
+//
+// LCD / Controller
+//
+#if ANY(VIKI2, miniVIKI)
+
+ #define BEEPER_PIN P1_31
+ #define DOGLCD_A0 P2_11
+ #define DOGLCD_CS P0_16
+
+ #define BTN_EN1 P3_25
+ #define BTN_EN2 P3_26
+ #define BTN_ENC P1_30
+
+ #define SD_DETECT_PIN P1_18
+ #define SDSS P1_21
+
+ #define STAT_LED_RED_PIN P1_19
+ #define STAT_LED_BLUE_PIN P1_20
+
+#elif HAS_WIRED_LCD
+
+ /**
+ * SD Support
+ *
+ * For the RRD GLCD it CANNOT share the same SPI as the LCD so it must be
+ * hooked up to the onboard SDCard SPI and use a spare pin for the SDCS.
+ * Also note that an external SDCard sharing the SPI port with the
+ * onboard/internal SDCard must be ejected before rebooting as the bootloader
+ * does not like the external card. NOTE Smoothie will not boot if the external
+ * sdcard is inserted in the RRD LCD sdcard slot at boot time, it must be
+ * inserted after it has booted.
+ */
+ #define SD_DETECT_PIN P0_27 // EXP2 Pin 7 (SD_CD, SD_DET)
+
+ #define SD_MISO_PIN P0_08 // EXP2 Pin 1 (PB3, SD_MISO)
+ #define SD_SCK_PIN P0_07 // EXP2 Pin 2 (SD_SCK)
+ #define SD_SS_PIN P0_28 // EXP2 Pin 4 (SD_CSEL, SD_CS)
+ #define SD_MOSI_PIN P0_09 // EXP2 Pin 6 (PB2, SD_MOSI)
+
+ /**
+ * The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either
+ * a custom cable with breakouts to the pins indicated below or the RRD GLCD Adapter board
+ * found at http://smoothieware.org/rrdglcdadapter
+ *
+ * Other links to information about setting up a display panel with Smoothieboard
+ * http://chibidibidiwah.wdfiles.com/local--files/panel/smoothieboard2sd.jpg
+ * http://smoothieware.org/panel
+ */
+ #if IS_RRD_FG_SC
+ // EXP1 Pins
+ #define BEEPER_PIN P1_31 // EXP1 Pin 1
+ #define BTN_ENC P1_30 // EXP1 Pin 2
+ #define LCD_PINS_ENABLE P0_18 // EXP1 Pin 3 (MOSI)
+ #define LCD_PINS_RS P0_16 // EXP1 Pin 4 (CS)
+ #define LCD_PINS_D4 P0_15 // EXP1 Pin 5 (SCK)
+ // EXP2 Pins
+ #define BTN_EN2 P3_26 // EXP2 Pin 3
+ #define BTN_EN1 P3_25 // EXP2 Pin 5
+
+ #elif IS_TFTGLCD_PANEL
+
+ #define SD_DETECT_PIN P0_27 // EXP2 Pin 7 (SD_CD, SD_DET)
+
+ #if ENABLED(TFTGLCD_PANEL_SPI)
+ #define TFTGLCD_CS P3_26 // EXP2 Pin 3
+ #endif
+
+ #else
+ #error "Marlin's Smoothieboard support cannot drive your LCD."
+ #endif
+
+#endif
+
+/**
+ * I2C Digipots - MCP4451
+ * Address 58 (2C << 1)
+ * Set from 0 - 127 with stop bit.
+ * (Ex. 3F << 1 | 1)
+ */
+#define DIGIPOTS_I2C_SCL P0_00
+#define DIGIPOTS_I2C_SDA_X P0_04
+#define DIGIPOTS_I2C_SDA_Y P0_10
+#define DIGIPOTS_I2C_SDA_Z P0_19
+#define DIGIPOTS_I2C_SDA_E0 P0_21
+#define DIGIPOTS_I2C_SDA_E1 P4_29
+
+#ifndef DIGIPOT_I2C_ADDRESS_A
+ #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address (58 <- 2C << 1)
+#endif
diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
new file mode 100644
index 0000000..d4f3e5b
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
@@ -0,0 +1,182 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * TH3D EZBoard pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "TH3D EZBoard"
+#define BOARD_WEBSITE_URL "th3dstudio.com"
+
+//
+// Servos
+//
+#define SERVO0_PIN P2_04
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN P1_24
+#define Y_STOP_PIN P1_25
+#define Z_STOP_PIN P1_26
+
+//
+// Filament Runout Sensor
+//
+#ifndef FIL_RUNOUT_PIN
+ #define FIL_RUNOUT_PIN P1_27
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_00
+#define X_DIR_PIN P1_16
+#define X_ENABLE_PIN P1_17
+
+#define Y_STEP_PIN P2_01
+#define Y_DIR_PIN P1_10
+#define Y_ENABLE_PIN P1_09
+
+#define Z_STEP_PIN P2_02
+#define Z_DIR_PIN P1_15
+#define Z_ENABLE_PIN P1_14
+
+#define E0_STEP_PIN P2_03
+#define E0_DIR_PIN P1_04
+#define E0_ENABLE_PIN P1_08
+
+#define E1_STEP_PIN P2_08
+#define E1_DIR_PIN P2_13
+#define E1_ENABLE_PIN P4_29
+
+#if HAS_TMC_UART
+ //
+ // TMC220x stepper drivers
+ // Software serial
+ //
+ #define X_SERIAL_TX_PIN P0_04
+ #define X_SERIAL_RX_PIN P0_05
+ #define Y_SERIAL_TX_PIN P0_10
+ #define Y_SERIAL_RX_PIN P0_11
+ #define Z_SERIAL_TX_PIN P0_19
+ #define Z_SERIAL_RX_PIN P0_20
+ #define E0_SERIAL_TX_PIN P0_22
+ #define E0_SERIAL_RX_PIN P0_21
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+//
+// Temp Sensors
+// 3.3V max when defined as an Analog Input!
+//
+#if TEMP_SENSOR_0 == 20 // PT100 Adapter
+ #define TEMP_0_PIN P0_02_A7 // Analog Input
+#else
+ #define TEMP_0_PIN P0_23_A0 // Analog Input P0_23
+#endif
+
+#define TEMP_BED_PIN P0_24_A1 // Analog Input P0_24
+#define TEMP_1_PIN P0_25_A2 // Analog Input P0_25
+
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+ #define FILWIDTH_PIN P0_26_A3 // Analog Input P0_26
+#else
+ #define TEMP_2_PIN P0_26_A3 // Analog Input P0_26
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN P2_05
+#define HEATER_0_PIN P2_07
+#ifndef FAN_PIN
+ #define FAN_PIN P2_06
+#endif
+#define FAN1_PIN P1_22
+
+//
+// Auto fans
+//
+#define AUTO_FAN_PIN P1_22 // FET 3
+#ifndef E0_AUTO_FAN_PIN
+ #define E0_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+#ifndef E1_AUTO_FAN_PIN
+ #define E1_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+#ifndef E2_AUTO_FAN_PIN
+ #define E2_AUTO_FAN_PIN AUTO_FAN_PIN
+#endif
+
+//
+// SD Card
+//
+
+#define SDCARD_CONNECTION ONBOARD
+
+#define SD_SCK_PIN P0_07
+#define SD_MISO_PIN P0_08
+#define SD_MOSI_PIN P0_09
+#define ONBOARD_SD_CS_PIN P0_06
+#define SD_SS_PIN ONBOARD_SD_CS_PIN
+
+//
+// LCD / Controller
+//
+
+/**
+ * _____
+ * 5V | · · | GND
+ * (LCD_EN) P0_18 | · · | P0_16 (LCD_RS)
+ * (LCD_D4) P0_15 | · · P3_25 (BTN_EN2)
+ * (RESET) P2_11 | · · | P3_26 (BTN_EN1)
+ * (BTN_ENC) P1_30 | · · | P1_31 (BEEPER)
+ * -----
+ * EXP1
+ *
+ * LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
+ * defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
+ *
+ * A remote SD card is currently not supported because the pins routed to the EXP2
+ * connector are shared with the onboard SD card.
+ */
+
+#if ENABLED(CR10_STOCKDISPLAY)
+ #define BEEPER_PIN P1_31
+ #define BTN_EN1 P3_26
+ #define BTN_EN2 P3_25
+ #define BTN_ENC P1_30
+ #define LCD_PINS_RS P0_16
+ #define LCD_PINS_ENABLE P0_18
+ #define LCD_PINS_D4 P0_15
+ #define KILL_PIN P2_11
+#elif HAS_WIRED_LCD
+ #error "Only the CR10_STOCKDISPLAY is supported with TH3D EZBoard."
+#endif
--
cgit v1.2.3