From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/mega/pins_CNCONTROLS_15.h | 127 ++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Marlin/src/pins/mega/pins_CNCONTROLS_15.h (limited to 'Marlin/src/pins/mega/pins_CNCONTROLS_15.h') diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h new file mode 100644 index 0000000..8bafbdf --- /dev/null +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h @@ -0,0 +1,127 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * CNControls V15 for HMS434 pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "CN Controls V15" + +// +// Servos +// +#define SERVO0_PIN 6 + +// +// Limit Switches +// +#define X_STOP_PIN 34 +#define Y_STOP_PIN 39 +#define Z_STOP_PIN 62 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 49 +#endif + +// +// Steppers +// +#define X_STEP_PIN 14 +#define X_DIR_PIN 25 +#define X_ENABLE_PIN 26 + +#define Y_STEP_PIN 11 +#define Y_DIR_PIN 12 +#define Y_ENABLE_PIN 15 + +#define Z_STEP_PIN 24 +#define Z_DIR_PIN 27 +#define Z_ENABLE_PIN 28 + +#define E0_STEP_PIN 64 +#define E0_DIR_PIN 65 +#define E0_ENABLE_PIN 63 + +// +// Temperature Sensors +// Analog Inputs +// +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 4 // Analog Input + +#ifndef TEMP_CHAMBER_PIN + #define TEMP_CHAMBER_PIN 5 // Analog Input +#endif + +// +// Heaters +// +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 32 +#define HEATER_CHAMBER_PIN 33 + +// +// Fans +// +#define FAN_PIN 8 + +// +// Auto fans +// +#define AUTO_FAN_PIN 30 +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef CHAMBER_AUTO_FAN_PIN + //#define CHAMBER_AUTO_FAN_PIN 10 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 40 + +// Common I/O + +#define FIL_RUNOUT_PIN 9 +//#define FIL_RUNOUT_PIN 29 // encoder sensor +//#define PWM_1_PIN 12 +//#define PWM_2_PIN 13 +//#define SPARE_IO 17 +#define BEEPER_PIN 13 +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 10 // 31 -- cgit v1.2.3