From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit
---
Marlin/src/pins/mega/pins_GT2560_REV_A.h | 169 +++++++++++++++++++++++++++++++
1 file changed, 169 insertions(+)
create mode 100644 Marlin/src/pins/mega/pins_GT2560_REV_A.h
(limited to 'Marlin/src/pins/mega/pins_GT2560_REV_A.h')
diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h
new file mode 100644
index 0000000..dcd829f
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h
@@ -0,0 +1,169 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Geeetech GT2560 Revision A board pin assignments, based on the work of
+ * George Robles (https://georges3dprinters.com) and
+ * Richard Smith
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#ifndef BOARD_INFO_NAME
+ #define BOARD_INFO_NAME "GT2560 Rev.A"
+#endif
+#define DEFAULT_MACHINE_NAME "Prusa i3 Pro B"
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN 22
+#define X_MAX_PIN 24
+#define Y_MIN_PIN 26
+#define Y_MAX_PIN 28
+#define Z_MIN_PIN 30
+
+#if ENABLED(BLTOUCH)
+ #if MB(GT2560_REV_A_PLUS)
+ #define SERVO0_PIN 11
+ #else
+ #define SERVO0_PIN 32
+ #endif
+ #define Z_MAX_PIN -1
+#else
+ #define Z_MAX_PIN 32
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN 25
+#define X_DIR_PIN 23
+#define X_ENABLE_PIN 27
+
+#define Y_STEP_PIN 31
+#define Y_DIR_PIN 33
+#define Y_ENABLE_PIN 29
+
+#define Z_STEP_PIN 37
+#define Z_DIR_PIN 39
+#define Z_ENABLE_PIN 35
+
+#define E0_STEP_PIN 43
+#define E0_DIR_PIN 45
+#define E0_ENABLE_PIN 41
+
+#define E1_STEP_PIN 49
+#define E1_DIR_PIN 47
+#define E1_ENABLE_PIN 48
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 8
+#define TEMP_1_PIN 9
+#define TEMP_BED_PIN 10
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN 2
+#define HEATER_1_PIN 3
+#define HEATER_BED_PIN 4
+#ifndef FAN_PIN
+ #define FAN_PIN 7
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS 53
+#define LED_PIN 13
+#define PS_ON_PIN 12
+#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
+#define KILL_PIN -1
+
+#if HAS_WIRED_LCD
+
+ #define BEEPER_PIN 18
+
+ #if IS_NEWPANEL
+
+ #if ENABLED(MKS_MINI_12864)
+ #define DOGLCD_A0 5
+ #define DOGLCD_CS 21
+ #define BTN_EN1 40
+ #define BTN_EN2 42
+ #elif ENABLED(FYSETC_MINI_12864)
+ // Disconnect EXP2-1 and EXP2-2, otherwise future firmware upload won't work.
+ #define DOGLCD_A0 20
+ #define DOGLCD_CS 17
+
+ #define NEOPIXEL_PIN 21
+ #define BTN_EN1 42
+ #define BTN_EN2 40
+
+ #define LCD_RESET_PIN 16
+
+ #define DEFAULT_LCD_CONTRAST 220
+
+ #define LCD_BACKLIGHT_PIN -1
+ #else
+ #define LCD_PINS_RS 20
+ #define LCD_PINS_ENABLE 17
+ #define LCD_PINS_D4 16
+ #define LCD_PINS_D5 21
+ #define LCD_PINS_D6 5
+ #define LCD_PINS_D7 6
+ #define BTN_EN1 42
+ #define BTN_EN2 40
+ #endif
+
+ #define BTN_ENC 19
+ #define SD_DETECT_PIN 38
+
+ #else // !IS_NEWPANEL
+
+ #define SHIFT_CLK_PIN 38
+ #define SHIFT_LD_PIN 42
+ #define SHIFT_OUT_PIN 40
+ #define SHIFT_EN_PIN 17
+
+ #define LCD_PINS_RS 16
+ #define LCD_PINS_ENABLE 5
+ #define LCD_PINS_D4 6
+ #define LCD_PINS_D5 21
+ #define LCD_PINS_D6 20
+ #define LCD_PINS_D7 19
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #define SD_DETECT_PIN -1
+
+ #endif // !IS_NEWPANEL
+
+#endif // HAS_WIRED_LCD
--
cgit v1.2.3