From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 Marlin/src/pins/mega/pins_LEAPFROG.h | 92 ++++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 Marlin/src/pins/mega/pins_LEAPFROG.h

(limited to 'Marlin/src/pins/mega/pins_LEAPFROG.h')

diff --git a/Marlin/src/pins/mega/pins_LEAPFROG.h b/Marlin/src/pins/mega/pins_LEAPFROG.h
new file mode 100644
index 0000000..9e6802b
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_LEAPFROG.h
@@ -0,0 +1,92 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Leapfrog Driver board pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+  #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Leapfrog"
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             47
+#define X_MAX_PIN                              2
+#define Y_MIN_PIN                             48
+#define Y_MAX_PIN                             15
+#define Z_MIN_PIN                             49
+#define Z_MAX_PIN                             -1
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            28
+#define X_DIR_PIN                             63
+#define X_ENABLE_PIN                          29
+
+#define Y_STEP_PIN                            14  // A6
+#define Y_DIR_PIN                             15  // A0
+#define Y_ENABLE_PIN                          39
+
+#define Z_STEP_PIN                            31  // A2
+#define Z_DIR_PIN                             32  // A6
+#define Z_ENABLE_PIN                          30  // A1
+
+#define E0_STEP_PIN                           34  // 34
+#define E0_DIR_PIN                            35  // 35
+#define E0_ENABLE_PIN                         33  // 33
+
+#define E1_STEP_PIN                           37  // 37
+#define E1_DIR_PIN                            40  // 40
+#define E1_ENABLE_PIN                         36  // 36
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            13  // Analog Input (D27)
+#define TEMP_1_PIN                            15  // Analog Input (1)
+#define TEMP_BED_PIN                          14  // Analog Input (1,2 or I2C)
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           9
+#define HEATER_1_PIN                           8  // 12
+#define HEATER_2_PIN                          11  // 13
+#define HEATER_BED_PIN                        10  // 14/15
+
+#define FAN_PIN                                7
+
+//
+// Misc. Functions
+//
+#define SDSS                                  11
+#define LED_PIN                               13
+#define SOL1_PIN                              16
+#define SOL2_PIN                              17
+
+/*  Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31)  */
-- 
cgit v1.2.3