From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 Marlin/src/pins/mega/pins_MEGACONTROLLER.h | 167 +++++++++++++++++++++++++++++
 1 file changed, 167 insertions(+)
 create mode 100644 Marlin/src/pins/mega/pins_MEGACONTROLLER.h

(limited to 'Marlin/src/pins/mega/pins_MEGACONTROLLER.h')

diff --git a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h
new file mode 100644
index 0000000..938ad82
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h
@@ -0,0 +1,167 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Mega controller pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#elif HOTENDS > 2 || E_STEPPERS > 2
+  #error "Mega Controller supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME "Mega Controller"
+
+//
+// Servos
+//
+#define SERVO0_PIN                            30
+#define SERVO1_PIN                            31
+#define SERVO2_PIN                            32
+#define SERVO3_PIN                            33
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             43
+#define X_MAX_PIN                             42
+#define Y_MIN_PIN                             38
+#define Y_MAX_PIN                             41
+#define Z_MIN_PIN                             40
+#define Z_MAX_PIN                             37
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     37
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            62  // A8
+#define X_DIR_PIN                             63  // A9
+#define X_ENABLE_PIN                          61  // A7
+
+#define Y_STEP_PIN                            65  // A11
+#define Y_DIR_PIN                             66  // A12
+#define Y_ENABLE_PIN                          64  // A10
+
+#define Z_STEP_PIN                            68  // A14
+#define Z_DIR_PIN                             69  // A15
+#define Z_ENABLE_PIN                          67  // A13
+
+#define E0_STEP_PIN                           23
+#define E0_DIR_PIN                            24
+#define E0_ENABLE_PIN                         22
+
+#define E1_STEP_PIN                           26
+#define E1_DIR_PIN                            27
+#define E1_ENABLE_PIN                         25
+
+//
+// Temperature Sensors
+//
+#if TEMP_SENSOR_0 == -1
+  #define TEMP_0_PIN                           4  // Analog Input
+#else
+  #define TEMP_0_PIN                           0  // Analog Input
+#endif
+
+#if TEMP_SENSOR_1 == -1
+  #define TEMP_1_PIN                           5  // Analog Input
+#else
+  #define TEMP_1_PIN                           2  // Analog Input
+#endif
+
+#define TEMP_2_PIN                             3  // Analog Input
+
+#if TEMP_SENSOR_BED == -1
+  #define TEMP_BED_PIN                         6  // Analog Input
+#else
+  #define TEMP_BED_PIN                         1  // Analog Input
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          29
+#define HEATER_1_PIN                          34
+#define HEATER_BED_PIN                        28
+
+#ifndef FAN_PIN
+  #define FAN_PIN                             39
+#endif
+#define FAN1_PIN                              35
+#define FAN2_PIN                              36
+
+#ifndef CONTROLLER_FAN_PIN
+  #define CONTROLLER_FAN_PIN            FAN2_PIN
+#endif
+
+#define FAN_SOFT_PWM
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+
+#ifndef CASE_LIGHT_PIN
+  #define CASE_LIGHT_PIN                       2
+#endif
+
+//
+// LCD / Controller
+//
+#if ENABLED(MINIPANEL)
+
+  #define BEEPER_PIN                          46
+  // Pins for DOGM SPI LCD Support
+  #define DOGLCD_A0                           47
+  #define DOGLCD_CS                           45
+  #define LCD_BACKLIGHT_PIN                   44  // backlight LED on PA3
+
+  #define KILL_PIN                            12
+  // GLCD features
+  // Uncomment screen orientation
+  //#define LCD_SCREEN_ROT_90
+  //#define LCD_SCREEN_ROT_180
+  //#define LCD_SCREEN_ROT_270
+
+  #define BTN_EN1                             48
+  #define BTN_EN2                             11
+  #define BTN_ENC                             10
+
+  #define SD_DETECT_PIN                       49
+
+#endif // MINIPANEL
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#define SPINDLE_LASER_PWM_PIN                  6  // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN                  7  // Pullup!
+#define SPINDLE_DIR_PIN                        8
-- 
cgit v1.2.3