From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/rambo/pins_MINIRAMBO.h | 196 +++++++++++++++++++++++++++++++++ 1 file changed, 196 insertions(+) create mode 100644 Marlin/src/pins/rambo/pins_MINIRAMBO.h (limited to 'Marlin/src/pins/rambo/pins_MINIRAMBO.h') diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h new file mode 100644 index 0000000..4dcf358 --- /dev/null +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -0,0 +1,196 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Mini-RAMBo pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'RAMBo' in 'Tools > Board' or the Mega2560 environment in PlatformIO." +#endif + +#if MB(MINIRAMBO_10A) + #define BOARD_INFO_NAME "Mini RAMBo 1.0a" +#else + #define BOARD_INFO_NAME "Mini RAMBo" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 12 +#define X_MAX_PIN 30 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 24 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 23 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 23 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 + +// Microstepping pins - Mapping not from fastio.h (?) +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 + +#define MOTOR_CURRENT_PWM_XY_PIN 46 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 44 +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 +#define HEATER_1_PIN 7 +#if !MB(MINIRAMBO_10A) + #define HEATER_2_PIN 6 +#endif +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 8 +#endif +#define FAN1_PIN 6 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#if !MB(MINIRAMBO_10A) + #define CASE_LIGHT_PIN 9 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +// use P1 connector for spindle pins +#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 18 // Pullup! +#define SPINDLE_DIR_PIN 19 + +// +// Průša i3 MK2 Multiplexer Support +// +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#if !MB(MINIRAMBO_10A) + #define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 +#endif + +// +// LCD / Controller +// +#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL + + #if !MB(MINIRAMBO_10A) + #define KILL_PIN 32 + #endif + + #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL + + #if MB(MINIRAMBO_10A) + + #define BEEPER_PIN 78 + + #define BTN_EN1 80 + #define BTN_EN2 73 + #define BTN_ENC 21 + + #define LCD_PINS_RS 38 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 14 + #define LCD_PINS_D5 15 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 31 + + #define SD_DETECT_PIN 72 + + #else // !MINIRAMBO_10A + + // AUX-4 + #define BEEPER_PIN 84 + + // AUX-2 + #define BTN_EN1 14 + #define BTN_EN2 72 + #define BTN_ENC 9 + + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 18 + #define LCD_PINS_D4 19 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + + #define SD_DETECT_PIN 15 + + #endif // !MINIRAMBO_10A + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL + +#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL -- cgit v1.2.3