From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit
---
Marlin/src/pins/rambo/pins_EINSY_RAMBO.h | 196 +++++++++++++++++++++++
Marlin/src/pins/rambo/pins_EINSY_RETRO.h | 203 ++++++++++++++++++++++++
Marlin/src/pins/rambo/pins_MINIRAMBO.h | 196 +++++++++++++++++++++++
Marlin/src/pins/rambo/pins_RAMBO.h | 256 +++++++++++++++++++++++++++++++
Marlin/src/pins/rambo/pins_SCOOVO_X9H.h | 159 +++++++++++++++++++
5 files changed, 1010 insertions(+)
create mode 100644 Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
create mode 100644 Marlin/src/pins/rambo/pins_EINSY_RETRO.h
create mode 100644 Marlin/src/pins/rambo/pins_MINIRAMBO.h
create mode 100644 Marlin/src/pins/rambo/pins_RAMBO.h
create mode 100644 Marlin/src/pins/rambo/pins_SCOOVO_X9H.h
(limited to 'Marlin/src/pins/rambo')
diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
new file mode 100644
index 0000000..2ca2cc9
--- /dev/null
+++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
@@ -0,0 +1,196 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Einsy-Rambo pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+ #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Einsy Rambo"
+
+//
+// TMC2130 Configuration_adv defaults for EinsyRambo
+//
+#if !AXIS_DRIVER_TYPE_X(TMC2130) || !AXIS_DRIVER_TYPE_Y(TMC2130) || !AXIS_DRIVER_TYPE_Z(TMC2130) || !AXIS_DRIVER_TYPE_E0(TMC2130)
+ #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRambo."
+#endif
+
+// TMC2130 Diag Pins (currently just for reference)
+#define X_DIAG_PIN 64
+#define Y_DIAG_PIN 69
+#define Z_DIAG_PIN 68
+#define E0_DIAG_PIN 65
+
+//
+// Limit Switches
+//
+// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers.
+// Otherwise use a physical endstop based configuration.
+//
+// SERVO0_PIN and Z_MIN_PIN configuration for BLTOUCH sensor when combined with SENSORLESS_HOMING.
+//
+
+#if DISABLED(SENSORLESS_HOMING)
+
+ #define X_STOP_PIN 12
+ #define Y_STOP_PIN 11
+ #define Z_STOP_PIN 10
+
+#else
+
+ #define X_STOP_PIN X_DIAG_PIN
+ #define Y_STOP_PIN Y_DIAG_PIN
+
+ #if ENABLED(BLTOUCH)
+ #define Z_STOP_PIN 11 // Y-MIN
+ #define SERVO0_PIN 10 // Z-MIN
+ #else
+ #define Z_STOP_PIN 10
+ #endif
+
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN 10
+#endif
+
+//
+// Filament Runout Sensor
+//
+#ifndef FIL_RUNOUT_PIN
+ #define FIL_RUNOUT_PIN 62
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN 37
+#define X_DIR_PIN 49
+#define X_ENABLE_PIN 29
+#define X_CS_PIN 41
+
+#define Y_STEP_PIN 36
+#define Y_DIR_PIN 48
+#define Y_ENABLE_PIN 28
+#define Y_CS_PIN 39
+
+#define Z_STEP_PIN 35
+#define Z_DIR_PIN 47
+#define Z_ENABLE_PIN 27
+#define Z_CS_PIN 67
+
+#define E0_STEP_PIN 34
+#define E0_DIR_PIN 43
+#define E0_ENABLE_PIN 26
+#define E0_CS_PIN 66
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 0 // Analog Input
+#define TEMP_1_PIN 1 // Analog Input
+#define TEMP_BED_PIN 2 // Analog Input
+#define TEMP_PROBE_PIN 3 // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN 3
+#define HEATER_BED_PIN 4
+
+#ifndef FAN_PIN
+ #define FAN_PIN 8
+#endif
+
+#ifndef FAN1_PIN
+ #define FAN1_PIN 6
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS 77
+#define LED_PIN 13
+
+#ifndef CASE_LIGHT_PIN
+ #define CASE_LIGHT_PIN 9
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+// use P1 connector for spindle pins
+#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN 18 // Pullup!
+#define SPINDLE_DIR_PIN 19
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#define E_MUX0_PIN 17
+#define E_MUX1_PIN 16
+#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78
+
+//
+// LCD / Controller
+//
+#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
+
+ #define KILL_PIN 32
+
+ #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+ #define LCD_PINS_RS 85
+ #define LCD_PINS_ENABLE 71
+ #define LCD_PINS_D4 70
+ #define BTN_EN1 61
+ #define BTN_EN2 59
+ #else
+ #define LCD_PINS_RS 82
+ #define LCD_PINS_ENABLE 61
+ #define LCD_PINS_D4 59
+ #define LCD_PINS_D5 70
+ #define LCD_PINS_D6 85
+ #define LCD_PINS_D7 71
+ #define BTN_EN1 14
+ #define BTN_EN2 72
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #endif
+
+ #define BTN_ENC 9 // AUX-2
+ #define BEEPER_PIN 84 // AUX-4
+ #define SD_DETECT_PIN 15
+
+ #endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
+#endif // HAS_WIRED_LCD
diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h
new file mode 100644
index 0000000..a6a4b65
--- /dev/null
+++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h
@@ -0,0 +1,203 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Einsy-Retro pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+ #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Einsy Retro"
+
+//
+// TMC2130 Configuration_adv defaults for EinsyRetro
+//
+#if !AXIS_DRIVER_TYPE_X(TMC2130) || !AXIS_DRIVER_TYPE_Y(TMC2130) || !AXIS_DRIVER_TYPE_Z(TMC2130) || !AXIS_DRIVER_TYPE_E0(TMC2130)
+ #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRetro."
+#endif
+
+// TMC2130 Diag Pins
+#define X_DIAG_PIN 64
+#define Y_DIAG_PIN 69
+#define Z_DIAG_PIN 68
+#define E0_DIAG_PIN 65
+
+//
+// Limit Switches
+//
+// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers.
+// Otherwise use a physical endstop based configuration.
+//
+// SERVO0_PIN and Z_MIN_PIN configuration for BLTOUCH sensor when combined with SENSORLESS_HOMING.
+//
+
+#if DISABLED(SENSORLESS_HOMING)
+
+ #define X_MIN_PIN 12 // X-
+ #define Y_MIN_PIN 11 // Y-
+ #define Z_MIN_PIN 10 // Z-
+ #define X_MAX_PIN 81 // X+
+ #define Y_MAX_PIN 57 // Y+
+
+#else
+
+ #if X_HOME_DIR < 0
+ #define X_MIN_PIN X_DIAG_PIN
+ #define X_MAX_PIN 81 // X+
+ #else
+ #define X_MIN_PIN 12 // X-
+ #define X_MAX_PIN X_DIAG_PIN
+ #endif
+
+ #if Y_HOME_DIR < 0
+ #define Y_MIN_PIN Y_DIAG_PIN
+ #define Y_MAX_PIN 57 // Y+
+ #else
+ #define Y_MIN_PIN 11 // Y-
+ #define Y_MAX_PIN Y_DIAG_PIN
+ #endif
+
+ #if ENABLED(BLTOUCH)
+ #define Z_MIN_PIN 11 // Y-MIN
+ #define SERVO0_PIN 10 // Z-MIN
+ #else
+ #define Z_MIN_PIN 10
+ #endif
+
+#endif
+
+#define Z_MAX_PIN 7
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN 10
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN 37
+#define X_DIR_PIN 49
+#define X_ENABLE_PIN 29
+#define X_CS_PIN 41
+
+#define Y_STEP_PIN 36
+#define Y_DIR_PIN 48
+#define Y_ENABLE_PIN 28
+#define Y_CS_PIN 39
+
+#define Z_STEP_PIN 35
+#define Z_DIR_PIN 47
+#define Z_ENABLE_PIN 27
+#define Z_CS_PIN 67
+
+#define E0_STEP_PIN 34
+#define E0_DIR_PIN 43
+#define E0_ENABLE_PIN 26
+#define E0_CS_PIN 66
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 0 // Analog Input
+#define TEMP_1_PIN 1 // Analog Input
+#define TEMP_BED_PIN 2 // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN 3
+#define HEATER_BED_PIN 4
+
+#ifndef FAN_PIN
+ #define FAN_PIN 8
+#endif
+#define FAN1_PIN 6
+
+//
+// Misc. Functions
+//
+#define SDSS 53
+#define LED_PIN 13
+
+#ifndef CASE_LIGHT_PIN
+ #define CASE_LIGHT_PIN 9
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+// use P1 connector for spindle pins
+#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN 18 // Pullup!
+#define SPINDLE_DIR_PIN 19
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#define E_MUX0_PIN 17
+#define E_MUX1_PIN 16
+#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78
+
+//
+// LCD / Controller
+//
+#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
+
+ #define KILL_PIN 32
+
+ #if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+ #define LCD_PINS_RS 85
+ #define LCD_PINS_ENABLE 71
+ #define LCD_PINS_D4 70
+ #define BTN_EN1 18
+ #define BTN_EN2 19
+ #else
+ #define LCD_PINS_RS 82
+ #define LCD_PINS_ENABLE 18 // On 0.6b, use 61
+ #define LCD_PINS_D4 19 // On 0.6b, use 59
+ #define LCD_PINS_D5 70
+ #define LCD_PINS_D6 85
+ #define LCD_PINS_D7 71
+ #define BTN_EN1 14
+ #define BTN_EN2 72
+ #endif
+
+ #define BTN_ENC 9 // AUX-2
+ #define BEEPER_PIN 84 // AUX-4
+
+ #define SD_DETECT_PIN 15
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
+
+#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE
diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h
new file mode 100644
index 0000000..4dcf358
--- /dev/null
+++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h
@@ -0,0 +1,196 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Mini-RAMBo pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+ #error "Oops! Select 'RAMBo' in 'Tools > Board' or the Mega2560 environment in PlatformIO."
+#endif
+
+#if MB(MINIRAMBO_10A)
+ #define BOARD_INFO_NAME "Mini RAMBo 1.0a"
+#else
+ #define BOARD_INFO_NAME "Mini RAMBo"
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN 12
+#define X_MAX_PIN 30
+#define Y_MIN_PIN 11
+#define Y_MAX_PIN 24
+#define Z_MIN_PIN 10
+#define Z_MAX_PIN 23
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN 23
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN 37
+#define X_DIR_PIN 48
+#define X_ENABLE_PIN 29
+
+#define Y_STEP_PIN 36
+#define Y_DIR_PIN 49
+#define Y_ENABLE_PIN 28
+
+#define Z_STEP_PIN 35
+#define Z_DIR_PIN 47
+#define Z_ENABLE_PIN 27
+
+#define E0_STEP_PIN 34
+#define E0_DIR_PIN 43
+#define E0_ENABLE_PIN 26
+
+// Microstepping pins - Mapping not from fastio.h (?)
+#define X_MS1_PIN 40
+#define X_MS2_PIN 41
+#define Y_MS1_PIN 69
+#define Y_MS2_PIN 39
+#define Z_MS1_PIN 68
+#define Z_MS2_PIN 67
+#define E0_MS1_PIN 65
+#define E0_MS2_PIN 66
+
+#define MOTOR_CURRENT_PWM_XY_PIN 46
+#define MOTOR_CURRENT_PWM_Z_PIN 45
+#define MOTOR_CURRENT_PWM_E_PIN 44
+// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
+#ifndef MOTOR_CURRENT_PWM_RANGE
+ #define MOTOR_CURRENT_PWM_RANGE 2000
+#endif
+#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 0 // Analog Input
+#define TEMP_1_PIN 1 // Analog Input
+#define TEMP_BED_PIN 2 // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN 3
+#define HEATER_1_PIN 7
+#if !MB(MINIRAMBO_10A)
+ #define HEATER_2_PIN 6
+#endif
+#define HEATER_BED_PIN 4
+
+#ifndef FAN_PIN
+ #define FAN_PIN 8
+#endif
+#define FAN1_PIN 6
+
+//
+// Misc. Functions
+//
+#define SDSS 53
+#define LED_PIN 13
+#if !MB(MINIRAMBO_10A)
+ #define CASE_LIGHT_PIN 9
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+// use P1 connector for spindle pins
+#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN 18 // Pullup!
+#define SPINDLE_DIR_PIN 19
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#define E_MUX0_PIN 17
+#define E_MUX1_PIN 16
+#if !MB(MINIRAMBO_10A)
+ #define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78
+#endif
+
+//
+// LCD / Controller
+//
+#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
+
+ #if !MB(MINIRAMBO_10A)
+ #define KILL_PIN 32
+ #endif
+
+ #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
+
+ #if MB(MINIRAMBO_10A)
+
+ #define BEEPER_PIN 78
+
+ #define BTN_EN1 80
+ #define BTN_EN2 73
+ #define BTN_ENC 21
+
+ #define LCD_PINS_RS 38
+ #define LCD_PINS_ENABLE 5
+ #define LCD_PINS_D4 14
+ #define LCD_PINS_D5 15
+ #define LCD_PINS_D6 32
+ #define LCD_PINS_D7 31
+
+ #define SD_DETECT_PIN 72
+
+ #else // !MINIRAMBO_10A
+
+ // AUX-4
+ #define BEEPER_PIN 84
+
+ // AUX-2
+ #define BTN_EN1 14
+ #define BTN_EN2 72
+ #define BTN_ENC 9
+
+ #define LCD_PINS_RS 82
+ #define LCD_PINS_ENABLE 18
+ #define LCD_PINS_D4 19
+ #define LCD_PINS_D5 70
+ #define LCD_PINS_D6 85
+ #define LCD_PINS_D7 71
+
+ #define SD_DETECT_PIN 15
+
+ #endif // !MINIRAMBO_10A
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
+
+#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h
new file mode 100644
index 0000000..be2317b
--- /dev/null
+++ b/Marlin/src/pins/rambo/pins_RAMBO.h
@@ -0,0 +1,256 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * IMPORTANT NOTE:
+ * Rambo users should be sure to compile Marlin using either the RAMBo
+ * board type if using the Arduino IDE - available via the link below - or
+ * the 'rambo' environment if using platformio, by specifying '-e rambo' on
+ * the command line or by changing the value of the 'env_default' variable to
+ * 'rambo' in the supplied platformio.ini.
+ *
+ * If you don't compile using the proper board type, the RAMBo's extended
+ * pins will likely be unavailable and accessories/addons may not work.
+ *
+ * Instructions for installing the Arduino RAMBo board type for the
+ * Arduino IDE are available at:
+ * https://reprap.org/wiki/Rambo_firmware
+ */
+
+/**
+ * Rambo pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Rambo"
+
+//
+// Servos
+//
+#define SERVO0_PIN 22 // Motor header MX1
+#define SERVO1_PIN 23 // Motor header MX2
+#define SERVO2_PIN 24 // Motor header MX3
+#define SERVO3_PIN 5 // PWM header pin 5
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN 12
+#define X_MAX_PIN 24
+#define Y_MIN_PIN 11
+#define Y_MAX_PIN 23
+#define Z_MIN_PIN 10
+#define Z_MAX_PIN 30
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN 30
+#endif
+
+#ifndef FIL_RUNOUT_PIN
+ #define FIL_RUNOUT_PIN 5
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN 37
+#define X_DIR_PIN 48
+#define X_ENABLE_PIN 29
+
+#define Y_STEP_PIN 36
+#define Y_DIR_PIN 49
+#define Y_ENABLE_PIN 28
+
+#define Z_STEP_PIN 35
+#define Z_DIR_PIN 47
+#define Z_ENABLE_PIN 27
+
+#define E0_STEP_PIN 34
+#define E0_DIR_PIN 43
+#define E0_ENABLE_PIN 26
+
+#define E1_STEP_PIN 33
+#define E1_DIR_PIN 42
+#define E1_ENABLE_PIN 25
+
+// Microstepping pins - Mapping not from fastio.h (?)
+#define X_MS1_PIN 40
+#define X_MS2_PIN 41
+#define Y_MS1_PIN 69
+#define Y_MS2_PIN 39
+#define Z_MS1_PIN 68
+#define Z_MS2_PIN 67
+#define E0_MS1_PIN 65
+#define E0_MS2_PIN 66
+#define E1_MS1_PIN 63
+#define E1_MS2_PIN 64
+
+#define DIGIPOTSS_PIN 38
+#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } // X Y Z E0 E1 digipot channels to stepper driver mapping
+#ifndef DIGIPOT_MOTOR_CURRENT
+ #define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 0 // Analog Input
+#define TEMP_1_PIN 1 // Analog Input
+#define TEMP_BED_PIN 2 // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN 9
+#define HEATER_1_PIN 7
+#define HEATER_2_PIN 6
+#define HEATER_BED_PIN 3
+
+#ifndef FAN_PIN
+ #define FAN_PIN 8
+#endif
+#define FAN1_PIN 6
+#define FAN2_PIN 2
+
+//
+// Misc. Functions
+//
+#define SDSS 53
+#define LED_PIN 13
+#define PS_ON_PIN 4
+
+#ifndef CASE_LIGHT_PIN
+ #define CASE_LIGHT_PIN 46
+#endif
+
+#ifndef FILWIDTH_PIN
+ #define FILWIDTH_PIN 3 // Analog Input
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN 31 // Pullup!
+#define SPINDLE_DIR_PIN 32
+
+//
+// SPI for Max6675 or Max31855 Thermocouple
+//
+#ifndef MAX6675_SS_PIN
+ #define MAX6675_SS_PIN 32 // SPINDLE_DIR_PIN / STAT_LED_BLUE_PIN
+#endif
+
+//
+// M7/M8/M9 - Coolant Control
+//
+#define COOLANT_MIST_PIN 22
+#define COOLANT_FLOOD_PIN 44
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#define E_MUX0_PIN 17
+#define E_MUX1_PIN 16
+#define E_MUX2_PIN 84 // 84 in MK2 Firmware
+
+//
+// LCD / Controller
+//
+#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL
+
+ #define KILL_PIN 80
+
+ #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL
+
+ #define LCD_PINS_RS 70
+ #define LCD_PINS_ENABLE 71
+ #define LCD_PINS_D4 72
+ #define LCD_PINS_D5 73
+ #define LCD_PINS_D6 74
+ #define LCD_PINS_D7 75
+
+ #if ANY(VIKI2, miniVIKI)
+ #define BEEPER_PIN 44
+ // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the
+ // beeper/buzzer is connected to pin 33; however, the pin used in the
+ // diagram is actually pin 44, so this is correct.
+
+ #define DOGLCD_A0 70
+ #define DOGLCD_CS 71
+ #define LCD_SCREEN_ROT_180
+
+ #define BTN_EN1 85
+ #define BTN_EN2 84
+ #define BTN_ENC 83
+
+ #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
+
+ #define STAT_LED_RED_PIN 22
+ #define STAT_LED_BLUE_PIN 32
+
+ #else // !VIKI2 && !miniVIKI
+
+ #define BEEPER_PIN 79 // AUX-4
+
+ // AUX-2
+ #define BTN_EN1 76
+ #define BTN_EN2 77
+ #define BTN_ENC 78
+
+ #define SD_DETECT_PIN 81
+
+ #endif // !VIKI2 && !miniVIKI
+
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+
+ #else // !IS_NEWPANEL - old style panel with shift register
+
+ // No Beeper added
+ #define BEEPER_PIN 33
+
+ // Buttons attached to a shift register
+ // Not wired yet
+ //#define SHIFT_CLK_PIN 38
+ //#define SHIFT_LD_PIN 42
+ //#define SHIFT_OUT_PIN 40
+ //#define SHIFT_EN_PIN 17
+
+ #define LCD_PINS_RS 75
+ #define LCD_PINS_ENABLE 17
+ #define LCD_PINS_D4 23
+ #define LCD_PINS_D5 25
+ #define LCD_PINS_D6 27
+ #define LCD_PINS_D7 29
+
+ #endif // !IS_NEWPANEL
+
+#endif // HAS_WIRED_LCD
diff --git a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h
new file mode 100644
index 0000000..5680b00
--- /dev/null
+++ b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h
@@ -0,0 +1,159 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/************************************************
+ * Rambo pin assignments MODIFIED FOR Scoovo X9H
+ ************************************************/
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Scoovo X9H"
+
+//
+// Servos
+//
+#define SERVO0_PIN 22 // Motor header MX1
+#define SERVO1_PIN 23 // Motor header MX2
+#define SERVO2_PIN 24 // Motor header MX3
+#define SERVO3_PIN 5 // PWM header pin 5
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN 12
+#define X_MAX_PIN 24
+#define Y_MIN_PIN 11
+#define Y_MAX_PIN 23
+#define Z_MIN_PIN 10
+#define Z_MAX_PIN 30
+
+//
+// Z Probe (when not Z_MIN_IN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN 30
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN 37
+#define X_DIR_PIN 48
+#define X_ENABLE_PIN 29
+
+#define Y_STEP_PIN 36
+#define Y_DIR_PIN 49
+#define Y_ENABLE_PIN 28
+
+#define Z_STEP_PIN 35
+#define Z_DIR_PIN 47
+#define Z_ENABLE_PIN 27
+
+#define E0_STEP_PIN 34
+#define E0_DIR_PIN 43
+#define E0_ENABLE_PIN 26
+
+#define E1_STEP_PIN 33
+#define E1_DIR_PIN 42
+#define E1_ENABLE_PIN 25
+
+// Microstepping pins - Mapping not from fastio.h (?)
+#define X_MS1_PIN 40
+#define X_MS2_PIN 41
+#define Y_MS1_PIN 69
+#define Y_MS2_PIN 39
+#define Z_MS1_PIN 68
+#define Z_MS2_PIN 67
+#define E0_MS1_PIN 65
+#define E0_MS2_PIN 66
+#define E1_MS1_PIN 63
+#define E1_MS2_PIN 64
+
+#define DIGIPOTSS_PIN 38
+#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } // X Y Z E0 E1 digipot channels to stepper driver mapping
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 0 // Analog Input
+#define TEMP_BED_PIN 7 // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN 9
+#define HEATER_1_PIN 7
+#define HEATER_BED_PIN 3
+
+#ifndef FAN_PIN
+ #define FAN_PIN 8
+#endif
+#define FAN1_PIN 6
+#define FAN2_PIN 2
+
+//
+// Misc. Functions
+//
+#define SDSS 53
+#define LED_PIN 13
+#define PS_ON_PIN 4
+
+#ifndef FILWIDTH_PIN
+ #define FILWIDTH_PIN 3 // Analog Input
+#endif
+
+//
+// LCD / Controller
+//
+#define LCD_PINS_RS 70 // Ext2_5
+#define LCD_PINS_ENABLE 71 // Ext2_7
+#define LCD_PINS_D4 72 // Ext2_9 ?
+#define LCD_PINS_D5 73 // Ext2_11 ?
+#define LCD_PINS_D6 74 // Ext2_13
+#define LCD_PINS_D7 75 // Ext2_15 ?
+#define BEEPER_PIN -1
+
+#define BTN_HOME 80 // Ext_16
+#define BTN_CENTER 81 // Ext_14
+#define BTN_ENC BTN_CENTER
+#define BTN_RIGHT 82 // Ext_12
+#define BTN_LEFT 83 // Ext_10
+#define BTN_UP 84 // Ext2_8
+#define BTN_DOWN 85 // Ext2_6
+
+#define HOME_PIN BTN_HOME
+
+#if ANY(VIKI2, miniVIKI)
+ #define BEEPER_PIN 44
+ // Pins for DOGM SPI LCD Support
+ #define DOGLCD_A0 70
+ #define DOGLCD_CS 71
+ #define LCD_SCREEN_ROT_180
+
+ #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
+
+ #define STAT_LED_RED_PIN 22
+ #define STAT_LED_BLUE_PIN 32
+#endif // VIKI2/miniVIKI
--
cgit v1.2.3