From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h | 197 ++++++++++++++++++++++++++++ 1 file changed, 197 insertions(+) create mode 100644 Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h (limited to 'Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h') diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h new file mode 100644 index 0000000..5b72478 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h @@ -0,0 +1,197 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Formbot Raptor pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 3 || E_STEPPERS > 3 + #error "Formbot supports up to 3 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Formbot Raptor" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME +#endif + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#ifndef X_MAX_PIN + #define X_MAX_PIN 2 +#endif +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card +#else + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) +#endif + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HAS_MULTI_HOTEND + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 8 + +#ifndef FAN_PIN + #define FAN_PIN 9 +#endif + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 57 +#endif + +#if !HAS_FILAMENT_SENSOR + #define FAN1_PIN 4 +#endif + +// +// Misc. Functions +// +#ifndef SDSS + #define SDSS 53 +#endif +#define LED_PIN 13 +#define LED4_PIN 5 + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +#define FILWIDTH_PIN 5 // Analog Input + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 5 +#endif + +// +// LCD / Controller +// +// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER +// +#if IS_RRD_SC + #define BEEPER_PIN 37 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 +#endif -- cgit v1.2.3