From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/ramps/pins_RAMPS.h | 781 +++++++++++++++++++++++++++++++++++++ 1 file changed, 781 insertions(+) create mode 100644 Marlin/src/pins/ramps/pins_RAMPS.h (limited to 'Marlin/src/pins/ramps/pins_RAMPS.h') diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h new file mode 100644 index 0000000..5bcd877 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -0,0 +1,781 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments + * + * Applies to the following boards: + * + * RAMPS_14_EFB (Hotend, Fan, Bed) + * RAMPS_14_EEB (Hotend0, Hotend1, Bed) + * RAMPS_14_EFF (Hotend, Fan0, Fan1) + * RAMPS_14_EEF (Hotend0, Hotend1, Fan) + * RAMPS_14_SF (Spindle, Controller Fan) + * + * RAMPS_13_EFB (Hotend, Fan, Bed) + * RAMPS_13_EEB (Hotend0, Hotend1, Bed) + * RAMPS_13_EFF (Hotend, Fan0, Fan1) + * RAMPS_13_EEF (Hotend0, Hotend1, Fan) + * RAMPS_13_SF (Spindle, Controller Fan) + * + * Other pins_MYBOARD.h files may override these defaults + * + * Differences between + * RAMPS_13 | RAMPS_14 + * 7 | 11 + */ + +#ifdef TARGET_LPC1768 + #error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768." +#elif defined(__STM32F1__) + #error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1." +#endif + +#if NOT_TARGET(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768, __AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' (or other appropriate target) in 'Tools > Board.'" +#endif + +// Custom flags and defines for the build +//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS 1.4" +#endif + +// +// Servos +// +#ifndef SERVO0_PIN + #ifdef IS_RAMPS_13 + #define SERVO0_PIN 7 + #else + #define SERVO0_PIN 11 + #endif +#endif +#ifndef SERVO1_PIN + #define SERVO1_PIN 6 +#endif +#ifndef SERVO2_PIN + #define SERVO2_PIN 5 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 4 +#endif + +// +// Limit Switches +// +#ifndef X_STOP_PIN + #ifndef X_MIN_PIN + #define X_MIN_PIN 3 + #endif + #ifndef X_MAX_PIN + #define X_MAX_PIN 2 + #endif +#endif +#ifndef Y_STOP_PIN + #ifndef Y_MIN_PIN + #define Y_MIN_PIN 14 + #endif + #ifndef Y_MAX_PIN + #define Y_MAX_PIN 15 + #endif +#endif +#ifndef Z_STOP_PIN + #ifndef Z_MIN_PIN + #define Z_MIN_PIN 18 + #endif + #ifndef Z_MAX_PIN + #define Z_MAX_PIN 19 + #endif +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#ifndef Z_STEP_PIN + #define Z_STEP_PIN 46 +#endif +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +// +// Temperature Sensors +// +#ifndef TEMP_0_PIN + #define TEMP_0_PIN 13 // Analog Input +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN 15 // Analog Input +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN 14 // Analog Input +#endif + +// +// SPI for Max6675 or Max31855 Thermocouple +// +#ifndef MAX6675_SS_PIN + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN) +#endif + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HAS_MULTI_HOTEND + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#ifndef MOSFET_D_PIN + #define MOSFET_D_PIN -1 +#endif +#ifndef RAMPS_D8_PIN + #define RAMPS_D8_PIN 8 +#endif +#ifndef RAMPS_D9_PIN + #define RAMPS_D9_PIN 9 +#endif +#ifndef RAMPS_D10_PIN + #define RAMPS_D10_PIN 10 +#endif + +#define HEATER_0_PIN RAMPS_D10_PIN + +#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN RAMPS_D9_PIN +#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN RAMPS_D8_PIN +#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN RAMPS_D8_PIN + #if HOTENDS == 1 + #define FAN1_PIN MOSFET_D_PIN + #else + #define HEATER_1_PIN MOSFET_D_PIN + #endif +#endif + +#ifndef FAN_PIN + #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN RAMPS_D9_PIN + #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN RAMPS_D8_PIN + #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define FAN_PIN 4 // IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN + #endif +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 5 // Analog Input on AUX2 +#endif + +// RAMPS 1.4 DIO 4 on the servos connector +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 4 +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif HAS_FREE_AUX2_PINS + #define CASE_LIGHT_PIN 44 // Hardware PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) + #if !NUM_SERVOS // Use servo connector if possible + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif HAS_FREE_AUX2_PINS + #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 + #else + #error "No auto-assignable Spindle/Laser pins available." + #endif +#endif + +// +// TMC software SPI +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI 66 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO 44 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK 64 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN 40 + #endif + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN 63 + #endif + #ifndef X2_SERIAL_TX_PIN + #define X2_SERIAL_TX_PIN -1 + #endif + #ifndef X2_SERIAL_RX_PIN + #define X2_SERIAL_RX_PIN -1 + #endif + + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN 59 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN 64 + #endif + #ifndef Y2_SERIAL_TX_PIN + #define Y2_SERIAL_TX_PIN -1 + #endif + #ifndef Y2_SERIAL_RX_PIN + #define Y2_SERIAL_RX_PIN -1 + #endif + + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN 42 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN 65 + #endif + #ifndef Z2_SERIAL_TX_PIN + #define Z2_SERIAL_TX_PIN -1 + #endif + #ifndef Z2_SERIAL_RX_PIN + #define Z2_SERIAL_RX_PIN -1 + #endif + + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN 44 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN 66 + #endif + #ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN -1 + #endif + #ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN -1 + #endif + #ifndef E2_SERIAL_TX_PIN + #define E2_SERIAL_TX_PIN -1 + #endif + #ifndef E2_SERIAL_RX_PIN + #define E2_SERIAL_RX_PIN -1 + #endif + #ifndef E3_SERIAL_TX_PIN + #define E3_SERIAL_TX_PIN -1 + #endif + #ifndef E3_SERIAL_RX_PIN + #define E3_SERIAL_RX_PIN -1 + #endif + #ifndef E4_SERIAL_TX_PIN + #define E4_SERIAL_TX_PIN -1 + #endif + #ifndef E4_SERIAL_RX_PIN + #define E4_SERIAL_RX_PIN -1 + #endif + #ifndef E5_SERIAL_TX_PIN + #define E5_SERIAL_TX_PIN -1 + #endif + #ifndef E5_SERIAL_RX_PIN + #define E5_SERIAL_RX_PIN -1 + #endif + #ifndef E6_SERIAL_TX_PIN + #define E6_SERIAL_TX_PIN -1 + #endif + #ifndef E6_SERIAL_RX_PIN + #define E6_SERIAL_RX_PIN -1 + #endif + #ifndef E7_SERIAL_TX_PIN + #define E7_SERIAL_TX_PIN -1 + #endif + #ifndef E7_SERIAL_RX_PIN + #define E7_SERIAL_RX_PIN -1 + #endif +#endif + +// +// Průša i3 MK2 Multiplexer Support +// +#ifndef E_MUX0_PIN + #define E_MUX0_PIN 40 // Z_CS_PIN +#endif +#ifndef E_MUX1_PIN + #define E_MUX1_PIN 42 // E0_CS_PIN +#endif +#ifndef E_MUX2_PIN + #define E_MUX2_PIN 44 // E1_CS_PIN +#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// + +#if HAS_WIRED_LCD + + // + // LCD Display output pins + // + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock + + #elif BOTH(IS_NEWPANEL, PANEL_ONE) + + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 65 + #define LCD_PINS_D5 66 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 64 + + #elif ENABLED(TFTGLCD_PANEL_SPI) + + #define TFTGLCD_CS 33 + + #else + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 + + #if !IS_NEWPANEL + #define BEEPER_PIN 37 + #endif + + #elif ENABLED(ZONESTAR_LCD) + + #error "CAUTION! ZONESTAR_LCD on RAMPS requires wiring modifications. It plugs into AUX2 but GND and 5V need to be swapped. Comment out this line to continue." + #define LCD_PINS_RS 64 + #define LCD_PINS_ENABLE 44 + #define LCD_PINS_D4 63 + #define LCD_PINS_D5 40 + #define LCD_PINS_D6 42 + #define LCD_PINS_D7 65 + + #else + + #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #else + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #endif + + #define LCD_PINS_D7 29 + + #if !IS_NEWPANEL + #define BEEPER_PIN 33 + #endif + + #endif + + #if !IS_NEWPANEL + // Buttons attached to a shift register + // Not wired yet + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 + #endif + + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + // + // LCD Display input pins + // + #if IS_NEWPANEL + + #if IS_RRD_SC + + #define BEEPER_PIN 37 + + #if ENABLED(CR10_STOCKDISPLAY) + #define BTN_EN1 17 + #define BTN_EN2 23 + #else + #define BTN_EN1 31 + #define BTN_EN2 33 + #endif + + #define BTN_ENC 35 + #ifndef SD_DETECT_PIN + #define SD_DETECT_PIN 49 + #endif + #ifndef KILL_PIN + #define KILL_PIN 41 + #endif + + #if ENABLED(BQ_LCD_SMART_CONTROLLER) + #define LCD_BACKLIGHT_PIN 39 + #endif + + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS SDSS + #define KILL_PIN 41 + + #elif ENABLED(LCD_I2C_VIKI) + + #define BTN_EN1 40 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 42 + #define BTN_ENC -1 + + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + + #elif ANY(VIKI2, miniVIKI) + + #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define LCD_SCREEN_ROT_180 + + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 + + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 + + #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board + #define KILL_PIN 31 + + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 + + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + + #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) + + #define BEEPER_PIN 37 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + + #ifndef KILL_PIN + #define KILL_PIN 41 + #endif + + #if ENABLED(MKS_MINI_12864) + + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 + + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + // not connected to a pin + #define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!) + + #define BTN_EN1 31 + #define BTN_EN2 33 + + #elif ENABLED(FYSETC_MINI_12864) + + // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 + + #define DOGLCD_A0 16 + #define DOGLCD_CS 17 + + #define BTN_EN1 33 + #define BTN_EN2 31 + + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 25 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 27 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 29 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN 25 + #endif + + #endif + + #elif ENABLED(MINIPANEL) + + #define BEEPER_PIN 42 + // not connected to a pin + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 + + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 + + #elif ENABLED(ZONESTAR_LCD) + + #define ADC_KEYPAD_PIN 12 + + #elif ENABLED(AZSMZ_12864) + + // Pins only defined for RAMPS_SMART currently + #error "No pins defined for RAMPS with AZSMZ_12864." + + #elif IS_TFTGLCD_PANEL + + #define SD_DETECT_PIN 49 + + #else + + // Beeper on AUX-4 + #define BEEPER_PIN 33 + + // Buttons are directly attached to AUX-2 + #if ENABLED(PANEL_ONE) + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 + #else + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 + #endif + + #if ENABLED(G3D_PANEL) + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + #endif + + #endif + #endif // IS_NEWPANEL + +#endif // HAS_WIRED_LCD + +#if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 + #ifndef BTN_EN1 + #define BTN_EN1 64 + #endif + #ifndef BTN_EN2 + #define BTN_EN2 59 + #endif + #ifndef BTN_ENC + #define BTN_ENC 63 + #endif +#endif + +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + + #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue." + + /** FYSETC TFT TFT81050 display pinout + * + * Board Display + * _____ _____ + * (SCK) D52 | 1 2 | D50 (MISO) MISO | 1 2 | SCK + * (SD_CS) D53 | 3 4 | D33 (BNT_EN2) (BNT_EN2) MOD_RESET | 3 4 | SD_CS + * (MOSI) D51 | 5 6 D31 (BNT_EN1) (BNT_EN1) LCD_CS | 5 6 MOSI + * RESET | 7 8 | D49 (SD_DET) SD_DET | 7 8 | RESET + * NC | 9 10| GND GND | 9 10| 5V + * ----- ----- + * EXP2 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP2-1 ----------- EXP1-10 + * EXP2-2 ----------- EXP1-9 + * EXP2-4 ----------- EXP1-8 + * EXP2-4 ----------- EXP1-7 + * EXP2-3 ----------- EXP1-6 + * EXP2-6 ----------- EXP1-5 + * EXP2-7 ----------- EXP1-4 + * EXP2-8 ----------- EXP1-3 + * EXP2-1 ----------- EXP1-2 + * EXP1-10 ----------- EXP1-1 + * + * NOTE: The MISO pin should not get a 5V signal. + * To fix, insert a 1N4148 diode in the MISO line. + */ + + #define BEEPER_PIN 37 + + #define SD_DETECT_PIN 49 + + #define CLCD_MOD_RESET 31 + #define CLCD_SPI_CS 33 +#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 -- cgit v1.2.3