From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/ramps/pins_RL200.h | 52 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Marlin/src/pins/ramps/pins_RL200.h (limited to 'Marlin/src/pins/ramps/pins_RL200.h') diff --git a/Marlin/src/pins/ramps/pins_RL200.h b/Marlin/src/pins/ramps/pins_RL200.h new file mode 100644 index 0000000..047ad16 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RL200.h @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Rapide Lite 200 v1 (RUMBA clone) pin assignments. Has slightly different assignment for + * extruder motors due to dual Z motors. Pinout therefore based on pins_RUMBA.h. + */ + +#define BOARD_INFO_NAME "RL200" +#define DEFAULT_MACHINE_NAME "Rapide Lite 200" + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "RL200v1 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#elif NUM_Z_STEPPER_DRIVERS != 2 + #error "RL200 uses dual Z stepper motors. Set NUM_Z_STEPPER_DRIVERS to 2 or comment out this line to continue." +#elif !(AXIS_DRIVER_TYPE_X(DRV8825) && AXIS_DRIVER_TYPE_Y(DRV8825) && AXIS_DRIVER_TYPE_Z(DRV8825) && AXIS_DRIVER_TYPE_Z2(DRV8825) && AXIS_DRIVER_TYPE_E0(DRV8825)) + #error "You must set ([XYZ]|Z2|E0)_DRIVER_TYPE to DRV8825 in Configuration.h for RL200." +#endif + +#define E0_STEP_PIN 26 // (RUMBA E1 pins) +#define E0_DIR_PIN 25 +#define E0_ENABLE_PIN 27 + +#define E1_STEP_PIN 29 // (RUMBA E2 pins) +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 39 + +#define Z2_STEP_PIN 23 // (RUMBA E0 pins) +#define Z2_DIR_PIN 22 +#define Z2_ENABLE_PIN 24 + +#include "pins_RUMBA.h" -- cgit v1.2.3