From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/sam/pins_RADDS.h | 298 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 298 insertions(+) create mode 100644 Marlin/src/pins/sam/pins_RADDS.h (limited to 'Marlin/src/pins/sam/pins_RADDS.h') diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h new file mode 100644 index 0000000..7b9c7f1 --- /dev/null +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -0,0 +1,298 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * RADDS + */ + +#if NOT_TARGET(__SAM3X8E__) + #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "RADDS" + +// +// EEPROM +// +#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM) + #define I2C_EEPROM + #define MARLIN_EEPROM_SIZE 0x2000 // 8KB +#endif + +// +// Servos +// +#if !HAS_CUTTER + #define SERVO0_PIN 5 +#endif +#define SERVO1_PIN 6 +#define SERVO2_PIN 39 +#define SERVO3_PIN 40 + +// +// Limit Switches +// +#define X_MIN_PIN 28 +#define X_MAX_PIN 34 +#define Y_MIN_PIN 30 +#define Y_MAX_PIN 36 +#define Z_MIN_PIN 32 +#define Z_MAX_PIN 38 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 38 +#endif + +// +// Steppers +// +#define X_STEP_PIN 24 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 26 +#ifndef X_CS_PIN + #define X_CS_PIN 25 +#endif + +#define Y_STEP_PIN 17 +#define Y_DIR_PIN 16 +#define Y_ENABLE_PIN 22 +#ifndef Y_CS_PIN + #define Y_CS_PIN 27 +#endif + +#define Z_STEP_PIN 2 +#define Z_DIR_PIN 3 +#define Z_ENABLE_PIN 15 +#ifndef Z_CS_PIN + #define Z_CS_PIN 29 +#endif + +#define E0_STEP_PIN 61 +#define E0_DIR_PIN 60 +#define E0_ENABLE_PIN 62 +#ifndef E0_CS_PIN + #define E0_CS_PIN 31 +#endif + +#define E1_STEP_PIN 64 +#define E1_DIR_PIN 63 +#define E1_ENABLE_PIN 65 +#ifndef E1_CS_PIN + #define E1_CS_PIN 33 +#endif + +#define E2_STEP_PIN 51 +#define E2_DIR_PIN 53 +#define E2_ENABLE_PIN 49 +#ifndef E2_CS_PIN + #define E2_CS_PIN 35 +#endif + +/** + * RADDS Extension Board V2 / V3 + * http://doku.radds.org/dokumentation/extension-board + */ +//#define RADDS_EXTENSION 2 +#if RADDS_EXTENSION >= 2 + #define E3_DIR_PIN 33 + #define E3_STEP_PIN 35 + #define E3_ENABLE_PIN 37 + #ifndef E3_CS_PIN + #define E3_CS_PIN 6 + #endif + + #if RADDS_EXTENSION == 3 + + #define E4_DIR_PIN 27 + #define E4_STEP_PIN 29 + #define E4_ENABLE_PIN 31 + #ifndef E4_CS_PIN + #define E4_CS_PIN 39 + #endif + + #define E5_DIR_PIN 66 + #define E5_STEP_PIN 67 + #define E5_ENABLE_PIN 68 + #ifndef E5_CS_PIN + #define E5_CS_PIN 6 + #endif + + #define RADDS_EXT_MSI_PIN 69 + + #define BOARD_INIT() OUT_WRITE(RADDS_EXT_VDD_PIN, HIGH) + + #else + + #define E4_DIR_PIN 27 + #define E4_STEP_PIN 29 + #define E4_ENABLE_PIN 31 + #ifndef E4_CS_PIN + #define E4_CS_PIN 39 + #endif + + // E3 and E4 share the same MSx pins + #define E3_MS1_PIN 67 + #define E4_MS1_PIN 67 + #define E3_MS2_PIN 68 + #define E4_MS2_PIN 68 + #define E3_MS3_PIN 69 + #define E4_MS3_PIN 69 + + #define RADDS_EXT_VDD2_PIN 66 + + #define BOARD_INIT() do{ OUT_WRITE(RADDS_EXT_VDD_PIN, HIGH); OUT_WRITE(RADDS_EXT_VDD2_PIN, HIGH); }while(0) + + #endif + + #define RADDS_EXT_VDD_PIN 25 + +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_2_PIN 2 // Analog Input +#define TEMP_3_PIN 3 // Analog Input +#define TEMP_4_PIN 5 // dummy so will compile when PINS_DEBUGGING is enabled +#define TEMP_BED_PIN 4 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 53 +#else + #define MAX6675_SS_PIN 49 +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 13 +#define HEATER_1_PIN 12 +#define HEATER_2_PIN 11 +#if !HAS_CUTTER + #define HEATER_BED_PIN 7 // BED +#endif + +#ifndef FAN_PIN + #define FAN_PIN 9 +#endif +#define FAN1_PIN 8 + +// +// Misc. Functions +// +#define SD_DETECT_PIN 14 +#define PS_ON_PIN 40 // SERVO3_PIN + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 39 // SERVO2_PIN +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER + #if !NUM_SERVOS + #define SPINDLE_LASER_PWM_PIN 5 // SERVO0_PIN + #endif + #define SPINDLE_LASER_ENA_PIN 7 // HEATER_BED_PIN - Pullup/down! +#endif + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #if ENABLED(RADDS_DISPLAY) + + #define LCD_PINS_RS 42 + #define LCD_PINS_ENABLE 43 + #define LCD_PINS_D4 44 + #define LCD_PINS_D5 45 + #define LCD_PINS_D6 46 + #define LCD_PINS_D7 47 + + #define BEEPER_PIN 41 + + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + + #define BTN_BACK 71 + + #define SDSS 10 + #define SD_DETECT_PIN 14 + + #elif IS_RRD_FG_SC + + // The REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER requires + // an adapter such as https://www.thingiverse.com/thing:1740725 + + #define LCD_PINS_RS 42 + #define LCD_PINS_ENABLE 43 + #define LCD_PINS_D4 44 + + #define BEEPER_PIN 41 + + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + + #define SDSS 10 + #define SD_DETECT_PIN 14 + + #elif HAS_U8GLIB_I2C_OLED + + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + #define BEEPER_PIN 41 + #define LCD_SDSS 10 + #define SD_DETECT_PIN 14 + + #elif ENABLED(SPARK_FULL_GRAPHICS) + + #define LCD_PINS_D4 29 + #define LCD_PINS_ENABLE 27 + #define LCD_PINS_RS 25 + + #define BTN_EN1 35 + #define BTN_EN2 33 + #define BTN_ENC 37 + + #endif // SPARK_FULL_GRAPHICS + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD + +#ifndef SDSS + #define SDSS 4 +#endif -- cgit v1.2.3