From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/sam/pins_RAMPS4DUE.h | 57 ++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Marlin/src/pins/sam/pins_RAMPS4DUE.h (limited to 'Marlin/src/pins/sam/pins_RAMPS4DUE.h') diff --git a/Marlin/src/pins/sam/pins_RAMPS4DUE.h b/Marlin/src/pins/sam/pins_RAMPS4DUE.h new file mode 100644 index 0000000..5454833 --- /dev/null +++ b/Marlin/src/pins/sam/pins_RAMPS4DUE.h @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Arduino Mega or Due with RAMPS4DUE pin assignments + * + * Applies to the following boards: + * + * RAMPS4DUE_EFB (Hotend, Fan, Bed) + * RAMPS4DUE_EEB (Hotend0, Hotend1, Bed) + * RAMPS4DUE_EFF (Hotend, Fan0, Fan1) + * RAMPS4DUE_EEF (Hotend0, Hotend1, Fan) + * RAMPS4DUE_SF (Spindle, Controller Fan) + * + * Differences between + * RAMPS_14 | RAMPS4DUE + * A13 | A9/D63 (shares the same pin with AUX2_4PIN) + * A14 | A10/D64 (shares the same pin with AUX2_5PIN) + * A15 | NC + */ + +#if NOT_TARGET(__SAM3X8E__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "RAMPS4DUE" + +#define IS_RAMPS4DUE + +// +// Temperature Sensors +// +#define TEMP_0_PIN 9 // Analog Input +#define TEMP_1_PIN -1 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +#include "../ramps/pins_RAMPS.h" -- cgit v1.2.3