From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/samd/pins_RAMPS_144.h | 615 ++++++++++++++++++++++++++++++++++ 1 file changed, 615 insertions(+) create mode 100644 Marlin/src/pins/samd/pins_RAMPS_144.h (limited to 'Marlin/src/pins/samd') diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h new file mode 100644 index 0000000..7a72ef6 --- /dev/null +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -0,0 +1,615 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * AGCM4 with RAMPS v1.4.4 pin assignments + */ + +#if NOT_TARGET(ARDUINO_GRAND_CENTRAL_M4) + #error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'" +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "AGCM4 RAMPS 1.4.4" +#endif + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 +#define SERVO3_PIN 4 + +// +// EEPROM +// +//#define QSPI_EEPROM // Use AGCM4 onboard QSPI EEPROM (Uses 4K of RAM) +#define I2C_EEPROM // EEPROM on I2C-0 +#define MARLIN_EEPROM_SIZE 0x8000 // 32K (24lc256) + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 18 +#endif + +// +// Steppers +// +#define X_STEP_PIN 67 // Mega/Due:54 - AGCM4:67 +#define X_DIR_PIN 68 // Mega/Due:55 - AGCM4:68 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 47 +#endif + +#define Y_STEP_PIN 73 // Mega/Due:60 - AGCM4:73 +#define Y_DIR_PIN 74 // Mega/Due:61 - AGCM4:74 +#define Y_ENABLE_PIN 69 // Mega/Due:56 - AGCM4:69 +#ifndef Y_CS_PIN + #define Y_CS_PIN 45 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 54 // Mega/Due:62 - AGCM4:54 +#ifndef Z_CS_PIN + #define Z_CS_PIN 32 +#endif + +#define Z2_STEP_PIN 36 +#define Z2_DIR_PIN 34 +#define Z2_ENABLE_PIN 30 +#ifndef Z2_CS_PIN + #define Z2_CS_PIN 22 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 43 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 +#define TEMP_BED_PIN 14 +#define TEMP_CHAMBER_PIN 15 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_BED_PIN 8 +#define FAN_PIN 9 +#define FAN1_PIN 7 +#define FAN2_PIN 12 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 5 // Analog Input on AUX2 +#endif + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 70 +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 39 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) + #if !NUM_SERVOS // Use servo connector if possible + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #else + #error "No auto-assignable Spindle/Laser pins available." + #endif +#endif + +// +// TMC software SPI +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI 58 // Mega/Due:66 - AGCM4:58 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO 44 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK 56 // Mega/Due:64 - AGCM4:56 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN 47 + #endif + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN 47 + #endif + #ifndef X2_SERIAL_TX_PIN + #define X2_SERIAL_TX_PIN -1 + #endif + #ifndef X2_SERIAL_RX_PIN + #define X2_SERIAL_RX_PIN -1 + #endif + + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN 45 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN 45 + #endif + #ifndef Y2_SERIAL_TX_PIN + #define Y2_SERIAL_TX_PIN -1 + #endif + #ifndef Y2_SERIAL_RX_PIN + #define Y2_SERIAL_RX_PIN -1 + #endif + + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN 32 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN 32 + #endif + #ifndef Z2_SERIAL_TX_PIN + #define Z2_SERIAL_TX_PIN 22 + #endif + #ifndef Z2_SERIAL_RX_PIN + #define Z2_SERIAL_RX_PIN 22 + #endif + + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN 43 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN 43 + #endif + #ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN -1 + #endif + #ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN -1 + #endif + #ifndef E2_SERIAL_TX_PIN + #define E2_SERIAL_TX_PIN -1 + #endif + #ifndef E2_SERIAL_RX_PIN + #define E2_SERIAL_RX_PIN -1 + #endif + #ifndef E3_SERIAL_TX_PIN + #define E3_SERIAL_TX_PIN -1 + #endif + #ifndef E3_SERIAL_RX_PIN + #define E3_SERIAL_RX_PIN -1 + #endif + #ifndef E4_SERIAL_TX_PIN + #define E4_SERIAL_TX_PIN -1 + #endif + #ifndef E4_SERIAL_RX_PIN + #define E4_SERIAL_RX_PIN -1 + #endif + #ifndef E5_SERIAL_TX_PIN + #define E5_SERIAL_TX_PIN -1 + #endif + #ifndef E5_SERIAL_RX_PIN + #define E5_SERIAL_RX_PIN -1 + #endif + #ifndef E6_SERIAL_TX_PIN + #define E6_SERIAL_TX_PIN -1 + #endif + #ifndef E6_SERIAL_RX_PIN + #define E6_SERIAL_RX_PIN -1 + #endif + #ifndef E7_SERIAL_TX_PIN + #define E7_SERIAL_TX_PIN -1 + #endif + #ifndef E7_SERIAL_RX_PIN + #define E7_SERIAL_RX_PIN -1 + #endif +#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// + +#if HAS_WIRED_LCD + + // + // LCD Display output pins + // + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + // TO TEST + //#define LCD_PINS_RS 49 // CS chip select /SS chip slave select + //#define LCD_PINS_ENABLE 51 // SID (MOSI) + //#define LCD_PINS_D4 52 // SCK (CLK) clock + + #elif BOTH(IS_NEWPANEL, PANEL_ONE) + + // TO TEST + //#define LCD_PINS_RS 40 + //#define LCD_PINS_ENABLE 42 + //#define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57 + //#define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58 + //#define LCD_PINS_D6 44 + //#define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56 + + #else + + #if ENABLED(CR10_STOCKDISPLAY) + + // TO TEST + //#define LCD_PINS_RS 27 + //#define LCD_PINS_ENABLE 29 + //#define LCD_PINS_D4 25 + + #if !IS_NEWPANEL + // TO TEST + //#define BEEPER_PIN 37 + #endif + + #elif ENABLED(ZONESTAR_LCD) + + // TO TEST + //#define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56 + //#define LCD_PINS_ENABLE 44 + //#define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55 + //#define LCD_PINS_D5 40 + //#define LCD_PINS_D6 42 + //#define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57 + + #else + + #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) + // TO TEST + //#define LCD_PINS_DC 25 // Set as output on init + //#define LCD_PINS_RS 27 // Pull low for 1s to init + // DOGM SPI LCD Support + //#define DOGLCD_CS 16 + //#define DOGLCD_MOSI 17 + //#define DOGLCD_SCK 23 + //#define DOGLCD_A0 LCD_PINS_DC + #else + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #endif + + #define LCD_PINS_D7 29 + + #if !IS_NEWPANEL + #define BEEPER_PIN 33 + #endif + + #endif + + #if !IS_NEWPANEL + // Buttons attached to a shift register + // Not wired yet + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 + #endif + + #endif + + // + // LCD Display input pins + // + #if IS_NEWPANEL + + #if IS_RRD_SC + + #define BEEPER_PIN 37 + + #if ENABLED(CR10_STOCKDISPLAY) + // TO TEST + //#define BTN_EN1 17 + //#define BTN_EN2 23 + #else + #define BTN_EN1 31 + #define BTN_EN2 33 + #endif + + #define BTN_ENC 35 + #ifndef SD_DETECT_PIN + #define SD_DETECT_PIN 49 + #endif + #define KILL_PIN 41 + + #if ENABLED(BQ_LCD_SMART_CONTROLLER) + // TO TEST + //#define LCD_BACKLIGHT_PIN 39 + #endif + + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + // TO TEST + //#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56 + //#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72 + //#define BTN_ENC 55 + //#define SD_DETECT_PIN 42 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + // TO TEST + //#define BTN_EN1 47 + //#define BTN_EN2 43 + //#define BTN_ENC 32 + //#define LCD_SDSS SDSS + //#define KILL_PIN 41 + + #elif ENABLED(LCD_I2C_VIKI) + + // TO TEST + //#define BTN_EN1 40 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + //#define BTN_EN2 42 + //#define BTN_ENC -1 + + //#define LCD_SDSS SDSS + //#define SD_DETECT_PIN 49 + + #elif ANY(VIKI2, miniVIKI) + + // TO TEST + //#define DOGLCD_CS 45 + //#define DOGLCD_A0 44 + //#define LCD_SCREEN_ROT_180 + + //#define BEEPER_PIN 33 + //#define STAT_LED_RED_PIN 32 + //#define STAT_LED_BLUE_PIN 35 + + //#define BTN_EN1 22 + //#define BTN_EN2 7 + //#define BTN_ENC 39 + + //#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board + //#define KILL_PIN 31 + + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + + // TO TEST + //#define DOGLCD_CS 29 + //#define DOGLCD_A0 27 + + //#define BEEPER_PIN 23 + //#define LCD_BACKLIGHT_PIN 33 + + //#define BTN_EN1 35 + //#define BTN_EN2 37 + //#define BTN_ENC 31 + + //#define LCD_SDSS SDSS + //#define SD_DETECT_PIN 49 + //#define KILL_PIN 41 + + #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) + + // TO TEST + //#define BEEPER_PIN 37 + //#define BTN_ENC 35 + //#define SD_DETECT_PIN 49 + + //#ifndef KILL_PIN + // #define KILL_PIN 41 + //#endif + + #if ENABLED(MKS_MINI_12864) + + // TO TEST + //#define DOGLCD_A0 27 + //#define DOGLCD_CS 25 + + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + // not connected to a pin + //#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57) + + //#define BTN_EN1 31 + //#define BTN_EN2 33 + + #elif ENABLED(FYSETC_MINI_12864) + + // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 + + // TO TEST + //#define DOGLCD_A0 16 + //#define DOGLCD_CS 17 + + //#define BTN_EN1 33 + //#define BTN_EN2 31 + + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + //#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + // TO TEST + //#define RGB_LED_R_PIN 25 + #endif + #ifndef RGB_LED_G_PIN + // TO TEST + //#define RGB_LED_G_PIN 27 + #endif + #ifndef RGB_LED_B_PIN + // TO TEST + //#define RGB_LED_B_PIN 29 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + // TO TEST + //#define NEOPIXEL_PIN 25 + #endif + + #endif + + #elif ENABLED(MINIPANEL) + + // TO TEST + //#define BEEPER_PIN 42 + // not connected to a pin + //#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57) + + //#define DOGLCD_A0 44 + //#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58 + + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + //#define BTN_EN1 40 + //#define BTN_EN2 55 // Mega/Due:63 - AGCM4:55 + //#define BTN_ENC 72 // Mega/Due:59 - AGCM4:72 + + //#define SD_DETECT_PIN 49 + //#define KILL_PIN 56 // Mega/Due:64 - AGCM4:56 + + #elif ENABLED(ZONESTAR_LCD) + + // TO TEST + //#define ADC_KEYPAD_PIN 12 + + #elif ENABLED(AZSMZ_12864) + + // TO TEST + + #else + + // Beeper on AUX-4 + //#define BEEPER_PIN 33 + + // Buttons are directly attached to AUX-2 + #if IS_RRW_KEYPAD + // TO TEST + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_CLK_PIN 44 + //#define SHIFT_LD_PIN 42 + //#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56 + //#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72 + //#define BTN_ENC 55 // Mega/Due:63 - AGCM4:55 + #elif ENABLED(PANEL_ONE) + // TO TEST + //#define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72) + //#define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55) + //#define BTN_ENC 49 // AUX3 PIN 7 + #else + // TO TEST + //#define BTN_EN1 37 + //#define BTN_EN2 35 + //#define BTN_ENC 31 + #endif + + #if ENABLED(G3D_PANEL) + // TO TEST + //#define SD_DETECT_PIN 49 + //#define KILL_PIN 41 + #endif + + #endif + #endif // IS_NEWPANEL + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD + +// +// SD Support +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + #undef SDSS + #define SDSS 83 + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 95 +#endif -- cgit v1.2.3