From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 Marlin/src/pins/sanguino/pins_GEN3_PLUS.h | 99 +++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)
 create mode 100644 Marlin/src/pins/sanguino/pins_GEN3_PLUS.h

(limited to 'Marlin/src/pins/sanguino/pins_GEN3_PLUS.h')

diff --git a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
new file mode 100644
index 0000000..33fc233
--- /dev/null
+++ b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
@@ -0,0 +1,99 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Gen3+ pin assignments
+ */
+
+/**
+ * Rev B    26 DEC 2016
+ *
+ * added pointer to a current Arduino IDE extension
+ */
+
+/**
+ * A useable Arduino IDE extension (board manager) can be found at
+ * https://github.com/Lauszus/Sanguino
+ *
+ * This extension has been tested on Arduino 1.6.12 & 1.8.0
+ *
+ * Here's the JSON path:
+ * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
+ *
+ * When installing select 1.0.2
+ *
+ * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use the above JSON URL instead of Sparkfun's JSON.
+ *
+ * Once installed select the SANGUINO board and then select the CPU.
+ */
+
+#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__)
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'"
+#endif
+
+#define BOARD_INFO_NAME "Gen3+"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            20
+#define Y_STOP_PIN                            25
+#define Z_STOP_PIN                            30
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            15
+#define X_DIR_PIN                             18
+#define X_ENABLE_PIN                          19
+
+#define Y_STEP_PIN                            23
+#define Y_DIR_PIN                             22
+#define Y_ENABLE_PIN                          24
+
+#define Z_STEP_PIN                            27
+#define Z_DIR_PIN                             28
+#define Z_ENABLE_PIN                          29
+
+#define E0_STEP_PIN                           17
+#define E0_DIR_PIN                            21
+#define E0_ENABLE_PIN                         13
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             0  // Analog Input (pin 33 extruder)
+#define TEMP_BED_PIN                           5  // Analog Input (pin 34 bed)
+
+//
+// Heaters
+//
+#define HEATER_0_PIN                          12
+#define HEATER_BED_PIN                        16
+
+//
+// Misc. Functions
+//
+#define SDSS                                   4
+#define PS_ON_PIN                             14
-- 
cgit v1.2.3