From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/sanguino/pins_GEN7_13.h | 54 +++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Marlin/src/pins/sanguino/pins_GEN7_13.h (limited to 'Marlin/src/pins/sanguino/pins_GEN7_13.h') diff --git a/Marlin/src/pins/sanguino/pins_GEN7_13.h b/Marlin/src/pins/sanguino/pins_GEN7_13.h new file mode 100644 index 0000000..55881aa --- /dev/null +++ b/Marlin/src/pins/sanguino/pins_GEN7_13.h @@ -0,0 +1,54 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Gen7 v1.3 pin assignments + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + */ + +#define BOARD_INFO_NAME "Gen7 v1.3" + +#define GEN7_VERSION 13 // v1.3 +#include "pins_GEN7_12.h" -- cgit v1.2.3