From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/stm32f1/pins_CHITU3D.h | 290 +++++++++++++++++++++++++++++++++ 1 file changed, 290 insertions(+) create mode 100644 Marlin/src/pins/stm32f1/pins_CHITU3D.h (limited to 'Marlin/src/pins/stm32f1/pins_CHITU3D.h') diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h new file mode 100644 index 0000000..bb6f571 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -0,0 +1,290 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 2017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Chitu3D" +#define DEFAULT_MACHINE_NAME "STM32F103RET6" + +#define BOARD_NO_NATIVE_USB + +// Enable I2C_EEPROM for testing +//#define I2C_EEPROM + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Steppers +// +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 +#define X_ENABLE_PIN PC13 +#define X_MIN_PIN PG10 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 +#define Y_ENABLE_PIN PE4 +#define Y_MIN_PIN PA12 +#define Y_MAX_PIN + +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 +#define Z_ENABLE_PIN PE1 +#define Z_MIN_PIN PA14 +#define Z_MAX_PIN -1 + +#define Y2_STEP_PIN -1 +#define Y2_DIR_PIN -1 +#define Y2_ENABLE_PIN -1 + +#define Z2_STEP_PIN -1 +#define Z2_DIR_PIN -1 +#define Z2_ENABLE_PIN -1 + +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 +#define E0_ENABLE_PIN PB8 + +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 + +#define E2_STEP_PIN -1 +#define E2_DIR_PIN -1 +#define E2_ENABLE_PIN -1 + +// +// Misc. Functions +// +#define SDSS -1 +#define LED_PIN -1 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN PA8 // 8 +#endif + +#define PS_ON_PIN -1 +#define KILL_PIN PD6 // LED strip 24v + +// +// Heaters / Fans +// +#define HEATER_0_PIN PD12 // HOT-END +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 + +#define HEATER_BED_PIN PG11 // HOT-BED +#define HEATER_BED2_PIN -1 // BED2 +#define HEATER_BED3_PIN -1 // BED3 + +#ifndef FAN_PIN + #define FAN_PIN PG14 // MAIN BOARD FAN +#endif + +#define FAN_SOFT_PWM + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN -1 // Analog Input +#define TEMP_2_PIN -1 // Analog Input + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI) + #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock + #elif BOTH(IS_NEWPANEL, PANEL_ONE) + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #else + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #if !IS_NEWPANEL + #define BEEPER_PIN PC1 // 33 + // Buttons attached to a shift register + // Not wired yet + //#define SHIFT_CLK_PIN PC6 // 38 + //#define SHIFT_LD_PIN PC10 // 42 + //#define SHIFT_OUT_PIN PC8 // 40 + //#define SHIFT_EN_PIN PA1 // 17 + #endif + #endif + + #if IS_NEWPANEL + + #if IS_RRD_SC + + #define BEEPER_PIN PC5 + + #define BTN_EN1 PB15 // 31 + #define BTN_EN2 PC1 // 33 + #define BTN_ENC PC3 // 35 + + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 + + #if ENABLED(BQ_LCD_SMART_CONTROLLER) + #define LCD_BACKLIGHT_PIN PC7 // 39 + #endif + + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SD_DETECT_PIN PC10 // 42 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 PC15 // 47 + #define BTN_EN2 PC11 // 43 + #define BTN_ENC PC0 // 32 + #define LCD_SDSS PD5 // 53 + #define SD_DETECT_PIN -1 + #define KILL_PIN PC9 // 41 + + #elif ENABLED(LCD_I2C_VIKI) + + #define BTN_EN1 PB6 // 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + + #define BTN_ENC -1 + #define LCD_SDSS PD5 // 53 + #define SD_DETECT_PIN PD1 // 49 + + #elif ANY(VIKI2, miniVIKI) + + #define BEEPER_PIN PC1 // 33 + + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PC13 // 45 + #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 PB6 // 22 + #define BTN_EN2 PA7 // 7 + #define BTN_ENC PC7 // 39 + + #define SDSS PD5 // 53 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + + #define KILL_PIN PB15 // 31 + + #define STAT_LED_RED_PIN PC0 // 32 + #define STAT_LED_BLUE_PIN PC3 // 35 + + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #define BTN_EN1 PC3 // 35 + #define BTN_EN2 PC5 // 37 + #define BTN_ENC PB15 // 31 + #define SD_DETECT_PIN PD1 // 49 + #define LCD_SDSS PD5 // 53 + #define KILL_PIN PC9 // 41 + #define BEEPER_PIN PB7 // 23 + #define DOGLCD_CS PB13 // 29 + #define DOGLCD_A0 PB11 // 27 + #define LCD_BACKLIGHT_PIN PC1 // 33 + + #elif ENABLED(MINIPANEL) + + #define BEEPER_PIN PC10 // 42 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PE2 // 66 + #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65 + #define SDSS PD5 // 53 + + #define KILL_PIN PE0 // 64 + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + // The encoder and click button + #define BTN_EN1 PC8 // 40 + #define BTN_EN2 PD15 // 63 + #define BTN_ENC PD11 // 59 + // not connected to a pin + #define SD_DETECT_PIN PD1 // 49 + + #else + + // Beeper on AUX-4 + #define BEEPER_PIN PC1 // 33 + + // Buttons directly attached to AUX-2 + #if IS_RRW_KEYPAD + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SHIFT_OUT_PIN PC8 // 40 + #define SHIFT_CLK_PIN PC12 // 44 + #define SHIFT_LD_PIN PC10 // 42 + #elif ENABLED(PANEL_ONE) + #define BTN_EN1 PD11 // 59 // AUX2 PIN 3 + #define BTN_EN2 PD15 // 63 // AUX2 PIN 4 + #define BTN_ENC PD1 // 49 // AUX3 PIN 7 + #else + #define BTN_EN1 PC5 // 37 + #define BTN_EN2 PC3 // 35 + #define BTN_ENC PB15 // 31 + #endif + + #if ENABLED(G3D_PANEL) + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 + #else + //#define SD_DETECT_PIN -1 // Ramps doesn't use this + #endif + + #endif + #endif // IS_NEWPANEL + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD -- cgit v1.2.3