From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 Marlin/src/pins/stm32f1/pins_STM32F1R.h | 140 ++++++++++++++++++++++++++++++++
 1 file changed, 140 insertions(+)
 create mode 100644 Marlin/src/pins/stm32f1/pins_STM32F1R.h

(limited to 'Marlin/src/pins/stm32f1/pins_STM32F1R.h')

diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h
new file mode 100644
index 0000000..d666755
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h
@@ -0,0 +1,140 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+/**
+ * 21017 Victor Perez Marlin for stm32f1 test
+ */
+
+#define BOARD_INFO_NAME      "Misc. STM32F1R"
+#define DEFAULT_MACHINE_NAME "STM32F103RET6"
+
+// Ignore temp readings during development.
+//#define BOGUS_TEMPERATURE_GRACE_PERIOD    2000
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                          PB3
+#define Y_STOP_PIN                          PB4
+#define Z_STOP_PIN                          PB5
+
+//
+// Steppers
+//
+#define X_STEP_PIN                          PC0
+#define X_DIR_PIN                           PC1
+#define X_ENABLE_PIN                        PA8
+
+#define Y_STEP_PIN                          PC2
+#define Y_DIR_PIN                           PC3
+#define Y_ENABLE_PIN                        PA8
+
+#define Z_STEP_PIN                          PC4
+#define Z_DIR_PIN                           PC5
+#define Z_ENABLE_PIN                        PA8
+
+#define E0_STEP_PIN                         PC6
+#define E0_DIR_PIN                          PC7
+#define E0_ENABLE_PIN                       PA8
+
+/**
+ * TODO: Currently using same Enable pin to all steppers.
+ */
+
+#define E1_STEP_PIN                         PC8
+#define E1_DIR_PIN                          PC9
+#define E1_ENABLE_PIN                       PA8
+
+#define E2_STEP_PIN                         PC10
+#define E2_DIR_PIN                          PC11
+#define E2_ENABLE_PIN                       PA8
+
+//
+// Misc. Functions
+//
+#define SDSS                                PA4
+#define LED_PIN                             PD2
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PB0   // EXTRUDER 1
+#define HEATER_1_PIN                        PB1
+
+#define HEATER_BED_PIN                      PA3   // BED
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN                        PA0   // Analog Input
+#define TEMP_0_PIN                          PA1   // Analog Input
+#define TEMP_1_PIN                          PA2   // Analog Input
+
+//
+// LCD Pins
+//
+#if HAS_WIRED_LCD
+
+  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+    #error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
+  #else
+    #define LCD_PINS_RS                     PB8
+    #define LCD_PINS_ENABLE                 PD2
+    #define LCD_PINS_D4                     PB12
+    #define LCD_PINS_D5                     PB13
+    #define LCD_PINS_D6                     PB14
+    #define LCD_PINS_D7                     PB15
+    #if !IS_NEWPANEL
+      #error "Non-NEWPANEL LCD is not supported."
+    #endif
+  #endif
+
+  #if IS_NEWPANEL
+    #if IS_RRD_SC
+      #error "RRD Smart Controller is not supported."
+    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+      #error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
+    #elif ENABLED(LCD_I2C_PANELOLU2)
+      #error "LCD_I2C_PANELOLU2 is not supported."
+    #elif ENABLED(LCD_I2C_VIKI)
+      #error "LCD_I2C_VIKI is not supported."
+    #elif ANY(VIKI2, miniVIKI)
+      #error "VIKI2 / miniVIKI is not supported."
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+      #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported."
+    #elif ENABLED(MINIPANEL)
+      #error "MINIPANEL is not supported."
+    #else
+      #error "Other generic NEWPANEL LCD is not supported."
+    #endif
+  #endif
+
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+    #define BTN_ENC_EN               LCD_PINS_D7  // Detect the presence of the encoder
+  #endif
+
+#endif // HAS_WIRED_LCD
-- 
cgit v1.2.3