From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h | 90 ++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h (limited to 'Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h') diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h new file mode 100644 index 0000000..4dce7b7 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h @@ -0,0 +1,90 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Pin assignments for the MKS RUMBA32 + * + * https://github.com/makerbase-mks/MKS-RUMBA32 + * + * The MKS and Aus3D versions have the same pinout but the MKS version + * has some added resistors and LEDs. The resistors needed for the + * TMC2208/9 UART interface are among the additions. Also added were + * connectors and resistors dedicated to the TMC2130 sensorless homing + * interface. + */ + +#define BOARD_INFO_NAME "MKS RUMBA32" + +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +#if ENABLED(FLASH_EEPROM_EMULATION) + // Decrease delays and flash wear by spreading writes across the + // 128 kB sector allocated for EEPROM emulation. + #define FLASH_EEPROM_LEVELING +#endif + +#include "pins_RUMBA32_common.h" + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN PA3 + #define X_SERIAL_RX_PIN PC14 + + #define Y_SERIAL_TX_PIN PA4 + #define Y_SERIAL_RX_PIN PE4 + + #define Z_SERIAL_TX_PIN PD13 + #define Z_SERIAL_RX_PIN PE0 + + #define E0_SERIAL_TX_PIN PD14 + #define E0_SERIAL_RX_PIN PC13 + + #define E1_SERIAL_TX_PIN PD15 + #define E1_SERIAL_RX_PIN PD5 + + #define E2_SERIAL_TX_PIN PD12 + #define E2_SERIAL_RX_PIN PD1 +#endif -- cgit v1.2.3