From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- Marlin/src/pins/teensy3/pins_TEENSY35_36.h | 152 +++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 Marlin/src/pins/teensy3/pins_TEENSY35_36.h (limited to 'Marlin/src/pins/teensy3/pins_TEENSY35_36.h') diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h new file mode 100644 index 0000000..71c3485 --- /dev/null +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -0,0 +1,152 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/**************************************************************************************** +* Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments +* Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE! +* https://www.pjrc.com/teensy/teensyduino.html +****************************************************************************************/ + +#if NOT_TARGET(IS_TEENSY_35_36) + #error "Oops! Select 'Teensy 3.5' or 'Teensy 3.6' in 'Tools > Board.'" +#endif + +#if IS_TEENSY35 + #define BOARD_INFO_NAME "Teensy3.5" +#elif IS_TEENSY36 + #define BOARD_INFO_NAME "Teensy3.6" +#endif + +/** + * Plan for Teensy 3.5 and Teensy 3.6: + * USB + * GND |-----#####-----| VIN 5V + * X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND + * X_DIR_PIN MISO1 TX1 1 | | 3.3V + * Y_STEP_PIN PWM 2 | *NC AREF* | 23 A9 PWM + * Y_DIR_PIN SCL2 CAN0TX PWM 3 | *A26 A10* | 22 A8 PWM + * Z_STEP_PIN SDA2 CAN0RX PWM 4 | *A25 A11* | 21 A7 PWM CS0 MOSI1 RX1 + * Z_DIR_PIN MISO1 TX1 PWM 5 | *GND * * 57 | 20 A6 PWM CS0 SCK1 FILWIDTH_PIN + * X_ENABLE_PIN PWM 6 | *GND * * 56 | 19 A5 SCL0 E0_STEP_PIN + * Y_ENABLE_PIN SCL0 MOSI0 RX3 PWM 7 | * * 55 | 18 A4 SDA0 E0_DIR_PIN + * Z_ENABLE_PIN SDA0 MISO0 TX3 PWM 8 | * * 54 | 17 A3 SDA0 E0_ENABLE_PIN + * CS0 RX2 PWM 9 | | 16 A2 SCL0 TEMP_0_PIN + * CS0 TX2 PWM 10 | | 15 A1 CS0 TEMP_BED_PIN + * X_STOP_PIN MOSI0 11 | | 14 A0 PWM CS0 TEMP_1_PIN + * Y_STOP_PIN MISO0 12 | | 13 LED SCK0 LED_PIN + * 3.3V | | GND + * Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1 + * AUX2 25 | 41 * * 52 | A21 DAC0 + * AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS + * AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1 + * AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1 + * D10 CONTROLLER_FAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM + * D9 HEATER_0_PIN CAN0RX PWM 30 | 45 * * 48 | 35 A16 PWM E1_ENABLE_PIN + * D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM SDA0 RX5 E1_DIR_PIN + * SCK1 TX4 A13 32 |__GND_*_*_3.3V_| 33 A14 PWM SCL0 TX5 E1_STEP_PIN + * + * Interior pins: + * LCD_PINS_RS 40 * * 53 SCK2 + * LCD_PINS_ENABLE 41 * * 52 MOSI2 + * LCD_PINS_D4 42 * * 51 MISO2 + * LCD_PINS_D5 CS2 43 * * 50 A24 + * LCD_PINS_D6 MOSI2 44 * * 49 A23 + * LCD_PINS_D7 MISO2 45 * * 48 TX6 SDA0 BTN_ENC + * BTN_EN1 SCK2 46 * * 47 RX6 SCL0 BTN_EN2 + * GND * * 3.3V + */ + +// +// Limit Switches +// +#define X_STOP_PIN 24 +#define Y_STOP_PIN 26 +#define Z_STOP_PIN 28 + +// +// Steppers +// +#define X_STEP_PIN 22 +#define X_DIR_PIN 21 +#define X_ENABLE_PIN 39 + +#define Y_STEP_PIN 19 +#define Y_DIR_PIN 18 +#define Y_ENABLE_PIN 20 + +#define Z_STEP_PIN 38 +#define Z_DIR_PIN 37 +#define Z_ENABLE_PIN 17 + +#define E0_STEP_PIN 31 +#define E0_DIR_PIN 30 +#define E0_ENABLE_PIN 32 + +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 35 + +#define HEATER_0_PIN 30 +#define HEATER_1_PIN 36 +#define HEATER_BED_PIN 31 +#ifndef FAN_PIN + #define FAN_PIN 2 +#endif + +#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 +#define TEMP_1_PIN 0 +#define TEMP_BED_PIN 1 // Bed / Analog pin numbering + +// +// Misc. Functions +// +#define LED_PIN 13 +#define PS_ON_PIN 1 +#define FILWIDTH_PIN 6 +#define SOL1_PIN 28 + +// +// SD Card +// +#define SDSS 39 // 8 + +#if HAS_WIRED_LCD + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 41 + #define LCD_PINS_D4 42 + #define LCD_PINS_D5 43 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 45 +#endif + +#if IS_NEWPANEL + #define BTN_EN1 46 + #define BTN_EN2 47 + #define BTN_ENC 48 +#endif + +#if IS_RRW_KEYPAD + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 +#endif -- cgit v1.2.3