From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- .../variants/BIGTREE_BTT002/PeripheralPins.c | 347 +++++++++++++++++++++ .../variants/BIGTREE_BTT002/PinNamesVar.h | 50 +++ .../variants/BIGTREE_BTT002/hal_conf_extra.h | 52 +++ .../PlatformIO/variants/BIGTREE_BTT002/ldscript.ld | 204 ++++++++++++ .../PlatformIO/variants/BIGTREE_BTT002/variant.cpp | 260 +++++++++++++++ .../PlatformIO/variants/BIGTREE_BTT002/variant.h | 292 +++++++++++++++++ 6 files changed, 1205 insertions(+) create mode 100644 buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c create mode 100644 buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PinNamesVar.h create mode 100644 buildroot/share/PlatformIO/variants/BIGTREE_BTT002/hal_conf_extra.h create mode 100644 buildroot/share/PlatformIO/variants/BIGTREE_BTT002/ldscript.ld create mode 100644 buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.cpp create mode 100644 buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.h (limited to 'buildroot/share/PlatformIO/variants/BIGTREE_BTT002') diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c new file mode 100644 index 0000000..bee09b1 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c @@ -0,0 +1,347 @@ +/* + ******************************************************************************* + * Copyright (c) 2019, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + * Automatically generated from STM32F407Z(E-G)Tx.xml + */ +#include +#include + +/* ===== + * Note: Commented lines are alternative possibilities which are not used by default. + * If you change them, you should know what you're doing first. + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 E0_DIR + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 BLTOUCH_2 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 BLTOUCH_4 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 E1_EN + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 TF_SS + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 TF_SCLK + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 TF_MISO + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 LED + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 HEATER2 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 HEATER0 + {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 Z_EN + {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 EXP_14 + {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 Z_DIR + {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 E0_EN + {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 EXP_8 + {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 EXP_7 + + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio, 24 ADC + {PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 TH_0 + {PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 TH_1 + {PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 TH_2 + {PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 TH_3 + {PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 EXP_13 + {PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 EXP_3 + {PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 EXP_6 + {PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 EXP_5 + #endif + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + #endif + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +const PinMap PinMap_I2C_SCL[] = { + {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + #endif + {NC, NP, 0} +}; +#endif + +//*** PWM *** + +#ifdef HAL_TIM_MODULE_ENABLED +const PinMap PinMap_PWM[] = { + {PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 BED + {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 HEATER0 + {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 FAN0 + {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 FAN1 + + /** + * Unused by specifications on BTT002. (PLEASE CONFIRM) + * Uncomment the corresponding line if you want to have HardwarePWM on some pins. + * WARNING: check timers' usage first to avoid conflicts. + * If you don't know what you're doing leave things as they are or you WILL break something (including hardware) + * If you alter this section DO NOT report bugs to Marlin team since they are most likely caused by you. Thank you. + */ + //{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + //{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 + //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 + //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 + //{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 + //{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + //{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 + //{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 + //{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + //{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N + //{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 + //{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + //{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + //{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N + //{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 + //{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + //{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + //{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + //{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + //{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + //{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + //{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + //{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + //{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + //{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + //{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + //{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + //{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + //{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + //{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + //{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 + //{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + //{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + //{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + //{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + //{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + //{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + //{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 + //{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + //{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + //{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 + //{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 + //{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + //{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 + //{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + //{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 + //{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + //{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 + //{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + //{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 + //{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + //{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + //{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + //{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + //{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + //{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + //{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + //{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + //{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + //{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 + //{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 + //{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 + //{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 + #endif + {NC, NP, 0} +}; +#endif + +//*** SERIAL *** + +#ifdef HAL_UART_MODULE_ENABLED +const PinMap PinMap_UART_TX[] = { + {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, + {PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + {PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + #endif + {NC, NP, 0} +}; + +const PinMap PinMap_UART_RX[] = { + {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, + {PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + {PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + #endif + {NC, NP, 0} +}; + +const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + {PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + #endif + {NC, NP, 0} +}; + +const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + {PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + #endif + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NP, 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NP, 0} +}; + +const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NP, 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NP, 0} +}; +#endif + +//*** CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +#error "CAN bus isn't available on this board. Driver should be disabled." +#endif + +//*** ETHERNET *** +#ifdef HAL_ETH_MODULE_ENABLED +#error "Ethernet port isn't available on this board. Driver should be disabled." +#endif + +//*** No QUADSPI *** + +//*** USB *** +#ifdef HAL_PCD_MODULE_ENABLED +const PinMap PinMap_USB_OTG_FS[] = { + //{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF used by LCD + //{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS available on wifi port, if empty + //{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID available on UART1_RX if not used + {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM + {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP + {NC, NP, 0} +}; + +const PinMap PinMap_USB_OTG_HS[] = { /* + #ifdef USE_USB_HS_IN_FS + {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID + {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS + {PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM + {PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP + #else + #error "USB in HS mode isn't supported by the board" + {PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0 + {PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1 + {PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2 + {PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7 + {PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3 + {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5 + {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6 + {PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP + {PC_2, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_DIR + {PC_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_NXT + #endif // USE_USB_HS_IN_FS + */ + {NC, NP, 0} +}; +#endif diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PinNamesVar.h b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PinNamesVar.h new file mode 100644 index 0000000..b4bb9d4 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PinNamesVar.h @@ -0,0 +1,50 @@ +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = NC, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = NC, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = NC, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = NC, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif +/* USB */ +#ifdef USBCON + USB_OTG_FS_SOF = PA_8, + USB_OTG_FS_VBUS = PA_9, + USB_OTG_FS_ID = PA_10, + USB_OTG_FS_DM = PA_11, + USB_OTG_FS_DP = PA_12, + USB_OTG_HS_ULPI_D0 = PA_3, + USB_OTG_HS_SOF = PA_4, + USB_OTG_HS_ULPI_CK = PA_5, + USB_OTG_HS_ULPI_D1 = PB_0, + USB_OTG_HS_ULPI_D2 = PB_1, + USB_OTG_HS_ULPI_D7 = PB_5, + USB_OTG_HS_ULPI_D3 = PB_10, + USB_OTG_HS_ULPI_D4 = PB_11, + USB_OTG_HS_ID = PB_12, + USB_OTG_HS_ULPI_D5 = PB_12, + USB_OTG_HS_ULPI_D6 = PB_13, + USB_OTG_HS_VBUS = PB_13, + USB_OTG_HS_DM = PB_14, + USB_OTG_HS_DP = PB_15, + USB_OTG_HS_ULPI_STP = PC_0, + USB_OTG_HS_ULPI_DIR = PC_2, + USB_OTG_HS_ULPI_NXT = PC_3, +#endif diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/hal_conf_extra.h new file mode 100644 index 0000000..e0e8239 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/hal_conf_extra.h @@ -0,0 +1,52 @@ +#pragma once + +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it? +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +//#define HAL_UART_MODULE_ENABLED // by default +//#define HAL_PCD_MODULE_ENABLED // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE) + +#undef HAL_SD_MODULE_ENABLED +#undef HAL_DAC_MODULE_ENABLED +#undef HAL_FLASH_MODULE_ENABLED +#undef HAL_CAN_MODULE_ENABLED +#undef HAL_CAN_LEGACY_MODULE_ENABLED +#undef HAL_CEC_MODULE_ENABLED +#undef HAL_CRYP_MODULE_ENABLED +#undef HAL_DCMI_MODULE_ENABLED +#undef HAL_DMA2D_MODULE_ENABLED +#undef HAL_ETH_MODULE_ENABLED +#undef HAL_NAND_MODULE_ENABLED +#undef HAL_NOR_MODULE_ENABLED +#undef HAL_PCCARD_MODULE_ENABLED +#undef HAL_SRAM_MODULE_ENABLED +#undef HAL_SDRAM_MODULE_ENABLED +#undef HAL_HASH_MODULE_ENABLED +#undef HAL_EXTI_MODULE_ENABLED +#undef HAL_SMBUS_MODULE_ENABLED +#undef HAL_I2S_MODULE_ENABLED +#undef HAL_IWDG_MODULE_ENABLED +#undef HAL_LTDC_MODULE_ENABLED +#undef HAL_DSI_MODULE_ENABLED +#undef HAL_QSPI_MODULE_ENABLED +#undef HAL_RNG_MODULE_ENABLED +#undef HAL_SAI_MODULE_ENABLED +#undef HAL_IRDA_MODULE_ENABLED +#undef HAL_SMARTCARD_MODULE_ENABLED +#undef HAL_WWDG_MODULE_ENABLED +#undef HAL_HCD_MODULE_ENABLED +#undef HAL_FMPI2C_MODULE_ENABLED +#undef HAL_SPDIFRX_MODULE_ENABLED +#undef HAL_DFSDM_MODULE_ENABLED +#undef HAL_LPTIM_MODULE_ENABLED +#undef HAL_MMC_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/ldscript.ld b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/ldscript.ld new file mode 100644 index 0000000..0c060d1 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/ldscript.ld @@ -0,0 +1,204 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F407ZGTx Device with +** 1024KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© COPYRIGHT(c) 2014 Ac6

+** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200;; /* required amount of heap */ +_Min_Stack_Size = 0x400;; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8008000, LENGTH = 1024K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text ALIGN(4): + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata ALIGN(4): + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.cpp b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.cpp new file mode 100644 index 0000000..1486b21 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.cpp @@ -0,0 +1,260 @@ +/* + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Pin number +// This array allows to wrap Arduino pin number(Dx or x) +// to STM32 PinName (PX_n) +const PinName digitalPin[] = { +#if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio + PC_13, //D0 + PC_14, //D1 - OSC32_IN + PC_15, //D2 - OSC32_OUT + PH_0, //D3 - OSC_IN + PH_1, //D4 - OSC_OUT + PB_2, //D5 - BOOT1 + PB_10, //D6 - 1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3 + PB_11, //D7 - 1:I2C2_SDA / USART3_RX / TIM2_CH4 + PB_12, //D8 - 1:SPI2_NSS / OTG_HS_ID + PB_13, //D9 - 1:SPI2_SCK 2:OTG_HS_VBUS + PB_14, //D10 - 1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM + PB_15, //D11 - SPI2_MOSI / TIM12_CH2 / OTG_HS_DP + PC_6, //D12 - 1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1 + PC_7, //D13 - 1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2 + PC_8, //D14 - 1:TIM8_CH3 / SDIO_D0 / TIM3_CH3 + PC_9, //D15 - 1:TIM8_CH4 / SDIO_D1 / TIM3_CH4 + PA_8, //D16 - 1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF + PA_9, //D17 - 1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS + PA_10, //D18 - 1:USART1_RX / TIM1_CH3 / OTG_FS_ID + PA_11, //D19 - 1:TIM1_CH4 / OTG_FS_DM + PA_12, //D20 - 1:OTG_FS_DP + PA_13, //D21 - 0:JTMS-SWDIO + PA_14, //D22 - 0:JTCK-SWCLK + PA_15, //D23 - 0:JTDI 1:SPI3_NSS / SPI1_NSS + PC_10, //D24 - 1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX + PC_11, //D25 - 1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX + PC_12, //D26 - 1:UART5_TX / SPI3_MOSI / SDIO_CK + PD_2, //D27 - 1:UART5_RX / SDIO_CMD + PB_3, //D28 - 0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK + PB_4, //D29 - 0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO + PB_5, //D30 - 1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI + PB_6, //D31 - 1:I2C1_SCL / TIM4_CH1 / USART1_TX + PB_7, //D32 - 1:I2C1_SDA / TIM4_CH2 / USART1_RX + PB_8, //D33 - 1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1 + PB_9, //D34 - 1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS + PA_0, //D35/A0 - 1:UART4_TX / TIM5_CH1 2:ADC123_IN0 + PA_1, //D36/A1 - 1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1 + PA_2, //D37/A2 - 1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2 + PA_3, //D38/A3 - 1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3 + PA_4, //D39/A4 - NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1 + PA_5, //D40/A5 - NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2 + PA_6, //D41/A6 - 1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6 + PA_7, //D42/A7 - 1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7 + PB_0, //D43/A8 - 1:TIM3_CH3 2:ADC12_IN8 + PB_1, //D44/A9 - 1:TIM3_CH4 2:ADC12_IN9 + PC_0, //D45/A10 - 1: 2:ADC123_IN10 + PC_1, //D46/A11 - 1: 2:ADC123_IN11 + PC_2, //D47/A12 - 1:SPI2_MISO 2:ADC123_IN12 + PC_3, //D48/A13 - 1:SPI2_MOSI 2:ADC123_IN13 + PC_4, //D49/A14 - 1: 2:ADC12_IN14 + PC_5, //D50/A15 - 1: 2:ADC12_IN15 + #if STM32F4X_PIN_NUM >= 144 + PF_3, //D51/A16 - 1:FSMC_A3 2:ADC3_IN9 + PF_4, //D52/A17 - 1:FSMC_A4 2:ADC3_IN14 + PF_5, //D53/A18 - 1:FSMC_A5 2:ADC3_IN15 + PF_6, //D54/A19 - 1:TIM10_CH1 2:ADC3_IN4 + PF_7, //D55/A20 - 1:TIM11_CH1 2:ADC3_IN5 + PF_8, //D56/A21 - 1:TIM13_CH1 2:ADC3_IN6 + PF_9, //D57/A22 - 1;TIM14_CH1 2:ADC3_IN7 + PF_10, //D58/A23 - 2:ADC3_IN8 + #endif +#endif +#if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio + PE_2, //D59 - 1:FSMC_A23 + PE_3, //D60 - 1:FSMC_A19 + PE_4, //D61 - 1:FSMC_A20 + PE_5, //D62 - 1:FSMC_A21 + PE_6, //D63 - 1:FSMC_A22 + PE_7, //D64 - 1:FSMC_D4 + PE_8, //D65 - 1:FSMC_D5 + PE_9, //D66 - 1:FSMC_D6 / TIM1_CH1 + PE_10, //D67 - 1:FSMC_D7 + PE_11, //D68 - 1:FSMC_D8 / TIM1_CH2 + PE_12, //D69 - 1:FSMC_D9 + PE_13, //D70 - 1:FSMC_D10 / TIM1_CH3 + PE_14, //D71 - 1:FSMC_D11 / TIM1_CH4 + PE_15, //D72 - 1:FSMC_D12 + PD_8, //D73 - 1:FSMC_D13 / USART3_TX + PD_9, //D74 - 1:FSMC_D14 / USART3_RX + PD_10, //D75 - 1:FSMC_D15 + PD_11, //D76 - 1:FSMC_A16 + PD_12, //D77 - 1:FSMC_A17 / TIM4_CH1 + PD_13, //D78 - 1:FSMC_A18 / TIM4_CH2 + PD_14, //D79 - 1:FSMC_D0 / TIM4_CH3 + PD_15, //D80 - 1:FSMC_D1 / TIM4_CH4 + PD_0, //D81 - 1:FSMC_D2 + PD_1, //D82 - 1:FSMC_D3 + PD_3, //D83 - 1:FSMC_CLK + PD_4, //D84 - 1:FSMC_NOE + PD_5, //D85 - 1:USART2_TX + PD_6, //D86 - 1:USART2_RX + PD_7, //D87 + PE_0, //D88 + PE_1, //D89 +#endif +#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + PF_0, //D90 - 1:FSMC_A0 / I2C2_SDA + PF_1, //D91 - 1:FSMC_A1 / I2C2_SCL + PF_2, //D92 - 1:FSMC_A2 + PF_11, //D93 + PF_12, //D94 - 1:FSMC_A6 + PF_13, //D95 - 1:FSMC_A7 + PF_14, //D96 - 1:FSMC_A8 + PF_15, //D97 - 1:FSMC_A9 + PG_0, //D98 - 1:FSMC_A10 + PG_1, //D99 - 1:FSMC_A11 + PG_2, //D100 - 1:FSMC_A12 + PG_3, //D101 - 1:FSMC_A13 + PG_4, //D102 - 1:FSMC_A14 + PG_5, //D103 - 1:FSMC_A15 + PG_6, //D104 + PG_7, //D105 + PG_8, //D106 + PG_9, //D107 - 1:USART6_RX + PG_10, //D108 - 1:FSMC_NE3 + PG_11, //D109 + PG_12, //D110 - 1:FSMC_NE4 + PG_13, //D111 - 1:FSMC_A24 + PG_14, //D112 - 1:FSMC_A25 / USART6_TX + PG_15, //D113 +#endif +#if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio + PI_8, //D114 + PI_9, //D115 + PI_10, //D116 + PI_11, //D117 + PH_2, //D118 + PH_3, //D119 + PH_4, //D120 - 1:I2C2_SCL + PH_5, //D121 - 1:I2C2_SDA + PH_6, //D122 - 1:TIM12_CH1 + PH_7, //D123 - 1:I2C3_SCL + PH_8, //D124 - 1:I2C3_SDA + PH_9, //D125 - 1:TIM12_CH2 + PH_10, //D126 - 1:TIM5_CH1 + PH_11, //D127 - 1:TIM5_CH2 + PH_12, //D128 - 1:TIM5_CH3 + PH_13, //D129 + PH_14, //D130 + PH_15, //D131 + PI_0, //D132 - 1:TIM5_CH4 / SPI2_NSS + PI_1, //D133 - 1:SPI2_SCK + PI_2, //D134 - 1:TIM8_CH4 /SPI2_MISO + PI_3, //D135 - 1:SPI2_MOS + PI_4, //D136 + PI_5, //D137 - 1:TIM8_CH1 + PI_6, //D138 - 1:TIM8_CH2 + PI_7, //D139 - 1:TIM8_CH3 +#endif +}; + +#ifdef __cplusplus +} +#endif + +// ------------------------ + +#ifdef __cplusplus +extern "C" { +#endif + + /** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config() { + + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + + /**Configure the main internal regulator output voltage + */ + __HAL_RCC_PWR_CLK_ENABLE(); + + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 8; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + _Error_Handler(__FILE__, __LINE__); + } + + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) { + _Error_Handler(__FILE__, __LINE__); + } + + /**Configure the Systick interrupt time + */ + HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000); + + /**Configure the Systick + */ + HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); + + /* SysTick_IRQn interrupt configuration */ + HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); +} + +#ifdef __cplusplus +} +#endif diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.h b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.h new file mode 100644 index 0000000..ecc319f --- /dev/null +++ b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/variant.h @@ -0,0 +1,292 @@ +/* + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +#ifdef STM32F405RX + #define STM32F4X_PIN_NUM 64 //64 pins mcu, 51 gpio + #define STM32F4X_GPIO_NUM 51 + #define STM32F4X_ADC_NUM 16 +#elif defined(STM32F407_5VX) + #define STM32F4X_PIN_NUM 100 //100 pins mcu, 82 gpio + #define STM32F4X_GPIO_NUM 82 + #define STM32F4X_ADC_NUM 16 +#elif defined(STM32F407_5ZX) + #define STM32F4X_PIN_NUM 144 //144 pins mcu, 114 gpio + #define STM32F4X_GPIO_NUM 114 + #define STM32F4X_ADC_NUM 24 +#elif defined(STM32F407IX) + #define STM32F4X_PIN_NUM 176 //176 pins mcu, 140 gpio + #define STM32F4X_GPIO_NUM 140 + #define STM32F4X_ADC_NUM 24 +#else + #error "no match MCU defined" +#endif + +#if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio + #define PC13 0 + #define PC14 1 //OSC32_IN + #define PC15 2 //OSC32_OUT + #define PH0 3 //OSC_IN + #define PH1 4 //OSC_OUT + #define PB2 5 //BOOT1 + #define PB10 6 //1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3 + #define PB11 7 //1:I2C2_SDA / USART3_RX / TIM2_CH4 + #define PB12 8 //1:SPI2_NSS / OTG_HS_ID + #define PB13 9 //1:SPI2_SCK 2:OTG_HS_VBUS + #define PB14 10 //1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM + #define PB15 11 //SPI2_MOSI / TIM12_CH2 / OTG_HS_DP + #define PC6 12 //1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1 + #define PC7 13 //1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2 + #define PC8 14 //1:TIM8_CH3 / SDIO_D0 / TIM3_CH3 + #define PC9 15 //1:TIM8_CH4 / SDIO_D1 / TIM3_CH4 + #define PA8 16 //1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF + #define PA9 17 //1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS + #define PA10 18 //1:USART1_RX / TIM1_CH3 / OTG_FS_ID + #define PA11 19 //1:TIM1_CH4 / OTG_FS_DM + #define PA12 20 //1:OTG_FS_DP + #define PA13 21 //0:JTMS-SWDIO + #define PA14 22 //0:JTCK-SWCLK + #define PA15 23 //0:JTDI 1:SPI3_NSS / SPI1_NSS + #define PC10 24 //1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX + #define PC11 25 //1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX + #define PC12 26 //1:UART5_TX / SPI3_MOSI / SDIO_CK + #define PD2 27 //1:UART5_RX / SDIO_CMD + #define PB3 28 //0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK + #define PB4 29 //0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO + #define PB5 30 //1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI + #define PB6 31 //1:I2C1_SCL / TIM4_CH1 / USART1_TX + #define PB7 32 //1:I2C1_SDA / TIM4_CH2 / USART1_RX + #define PB8 33 //1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1 + #define PB9 34 //1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS + #define PA0 35 //1:UART4_TX / TIM5_CH1 2:ADC123_IN0 + #define PA1 36 //1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1 + #define PA2 37 //1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2 + #define PA3 38 //1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3 + #define PA4 39 //NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1 + #define PA5 40 //NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2 + #define PA6 41 //1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6 + #define PA7 42 //1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7 + #define PB0 43 //1:TIM3_CH3 2:ADC12_IN8 + #define PB1 44 //1:TIM3_CH4 2:ADC12_IN9 + #define PC0 45 //1: 2:ADC123_IN10 + #define PC1 46 //1: 2:ADC123_IN11 + #define PC2 47 //1:SPI2_MISO 2:ADC123_IN12 + #define PC3 48 //1:SPI2_MOSI 2:ADC123_IN13 + #define PC4 49 //1: 2:ADC12_IN14 + #define PC5 50 //1: 2:ADC12_IN15 + #if STM32F4X_PIN_NUM >= 144 + #define PF3 51 //1:FSMC_A3 2:ADC3_IN9 + #define PF4 52 //1:FSMC_A4 2:ADC3_IN14 + #define PF5 53 //1:FSMC_A5 2:ADC3_IN15 + #define PF6 54 //1:TIM10_CH1 2:ADC3_IN4 + #define PF7 55 //1:TIM11_CH1 2:ADC3_IN5 + #define PF8 56 //1:TIM13_CH1 2:ADC3_IN6 + #define PF9 57 //1;TIM14_CH1 2:ADC3_IN7 + #define PF10 58 //2:ADC3_IN8 + #endif +#endif +#if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio + #define PE2 (35+STM32F4X_ADC_NUM) //1:FSMC_A23 + #define PE3 (36+STM32F4X_ADC_NUM) //1:FSMC_A19 + #define PE4 (37+STM32F4X_ADC_NUM) //1:FSMC_A20 + #define PE5 (38+STM32F4X_ADC_NUM) //1:FSMC_A21 + #define PE6 (39+STM32F4X_ADC_NUM) //1:FSMC_A22 + #define PE7 (40+STM32F4X_ADC_NUM) //1:FSMC_D4 + #define PE8 (41+STM32F4X_ADC_NUM) //1:FSMC_D5 + #define PE9 (42+STM32F4X_ADC_NUM) //1:FSMC_D6 / TIM1_CH1 + #define PE10 (43+STM32F4X_ADC_NUM) //1:FSMC_D7 + #define PE11 (44+STM32F4X_ADC_NUM) //1:FSMC_D8 / TIM1_CH2 + #define PE12 (45+STM32F4X_ADC_NUM) //1:FSMC_D9 + #define PE13 (46+STM32F4X_ADC_NUM) //1:FSMC_D10 / TIM1_CH3 + #define PE14 (47+STM32F4X_ADC_NUM) //1:FSMC_D11 / TIM1_CH4 + #define PE15 (48+STM32F4X_ADC_NUM) //1:FSMC_D12 + #define PD8 (49+STM32F4X_ADC_NUM) //1:FSMC_D13 / USART3_TX + #define PD9 (50+STM32F4X_ADC_NUM) //1:FSMC_D14 / USART3_RX + #define PD10 (51+STM32F4X_ADC_NUM) //1:FSMC_D15 + #define PD11 (52+STM32F4X_ADC_NUM) //1:FSMC_A16 + #define PD12 (53+STM32F4X_ADC_NUM) //1:FSMC_A17 / TIM4_CH1 + #define PD13 (54+STM32F4X_ADC_NUM) //1:FSMC_A18 / TIM4_CH2 + #define PD14 (55+STM32F4X_ADC_NUM) //1:FSMC_D0 / TIM4_CH3 + #define PD15 (56+STM32F4X_ADC_NUM) //1:FSMC_D1 / TIM4_CH4 + #define PD0 (57+STM32F4X_ADC_NUM) //1:FSMC_D2 + #define PD1 (58+STM32F4X_ADC_NUM) //1:FSMC_D3 + #define PD3 (59+STM32F4X_ADC_NUM) //1:FSMC_CLK + #define PD4 (60+STM32F4X_ADC_NUM) //1:FSMC_NOE + #define PD5 (61+STM32F4X_ADC_NUM) //1:USART2_TX + #define PD6 (62+STM32F4X_ADC_NUM) //1:USART2_RX + #define PD7 (63+STM32F4X_ADC_NUM) + #define PE0 (64+STM32F4X_ADC_NUM) + #define PE1 (65+STM32F4X_ADC_NUM) +#endif +#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio + #define PF0 (66+STM32F4X_ADC_NUM) //1:FSMC_A0 / I2C2_SDA + #define PF1 (67+STM32F4X_ADC_NUM) //1:FSMC_A1 / I2C2_SCL + #define PF2 (68+STM32F4X_ADC_NUM) //1:FSMC_A2 + #define PF11 (69+STM32F4X_ADC_NUM) + #define PF12 (70+STM32F4X_ADC_NUM) //1:FSMC_A6 + #define PF13 (71+STM32F4X_ADC_NUM) //1:FSMC_A7 + #define PF14 (72+STM32F4X_ADC_NUM) //1:FSMC_A8 + #define PF15 (73+STM32F4X_ADC_NUM) //1:FSMC_A9 + #define PG0 (74+STM32F4X_ADC_NUM) //1:FSMC_A10 + #define PG1 (75+STM32F4X_ADC_NUM) //1:FSMC_A11 + #define PG2 (76+STM32F4X_ADC_NUM) //1:FSMC_A12 + #define PG3 (77+STM32F4X_ADC_NUM) //1:FSMC_A13 + #define PG4 (78+STM32F4X_ADC_NUM) //1:FSMC_A14 + #define PG5 (79+STM32F4X_ADC_NUM) //1:FSMC_A15 + #define PG6 (80+STM32F4X_ADC_NUM) + #define PG7 (81+STM32F4X_ADC_NUM) + #define PG8 (82+STM32F4X_ADC_NUM) + #define PG9 (83+STM32F4X_ADC_NUM) //1:USART6_RX + #define PG10 (84+STM32F4X_ADC_NUM) //1:FSMC_NE3 + #define PG11 (85+STM32F4X_ADC_NUM) + #define PG12 (86+STM32F4X_ADC_NUM) //1:FSMC_NE4 + #define PG13 (87+STM32F4X_ADC_NUM) //1:FSMC_A24 + #define PG14 (88+STM32F4X_ADC_NUM) //1:FSMC_A25 / USART6_TX + #define PG15 (89+STM32F4X_ADC_NUM) +#endif +#if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio + #define PI8 (90+STM32F4X_ADC_NUM) + #define PI9 (91+STM32F4X_ADC_NUM) + #define PI10 (92+STM32F4X_ADC_NUM) + #define PI11 (93+STM32F4X_ADC_NUM) + #define PH2 (94+STM32F4X_ADC_NUM) + #define PH3 (95+STM32F4X_ADC_NUM) + #define PH4 (96+STM32F4X_ADC_NUM) //1:I2C2_SCL + #define PH5 (97+STM32F4X_ADC_NUM) //1:I2C2_SDA + #define PH6 (98+STM32F4X_ADC_NUM) //1:TIM12_CH1 + #define PH7 (99+STM32F4X_ADC_NUM) //1:I2C3_SCL + #define PH8 (100+STM32F4X_ADC_NUM) //1:I2C3_SDA + #define PH9 (101+STM32F4X_ADC_NUM) //1:TIM12_CH2 + #define PH10 (102+STM32F4X_ADC_NUM) //1:TIM5_CH1 + #define PH11 (103+STM32F4X_ADC_NUM) //1:TIM5_CH2 + #define PH12 (104+STM32F4X_ADC_NUM) //1:TIM5_CH3 + #define PH13 (105+STM32F4X_ADC_NUM) + #define PH14 (106+STM32F4X_ADC_NUM) + #define PH15 (107+STM32F4X_ADC_NUM) + #define PI0 (108+STM32F4X_ADC_NUM) //1:TIM5_CH4 / SPI2_NSS + #define PI1 (109+STM32F4X_ADC_NUM) //1:SPI2_SCK + #define PI2 (110+STM32F4X_ADC_NUM) //1:TIM8_CH4 /SPI2_MISO + #define PI3 (111+STM32F4X_ADC_NUM) //1:SPI2_MOS + #define PI4 (112+STM32F4X_ADC_NUM) + #define PI5 (113+STM32F4X_ADC_NUM) //1:TIM8_CH1 + #define PI6 (114+STM32F4X_ADC_NUM) //1:TIM8_CH2 + #define PI7 (115+STM32F4X_ADC_NUM) //1:TIM8_CH3 +#endif + +// This must be a literal +#define NUM_DIGITAL_PINS (STM32F4X_GPIO_NUM) +// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS +#define NUM_ANALOG_INPUTS (STM32F4X_ADC_NUM) +#define NUM_ANALOG_FIRST 35 + +// Below ADC, DAC and PWM definitions already done in the core +// Could be redefined here if needed +// ADC resolution is 12bits +//#define ADC_RESOLUTION 12 +//#define DACC_RESOLUTION 12 + +// PWM resolution +/* + * BEWARE: + * Changing this value from the default (1000) will affect the PWM output value of analogWrite (to a PWM pin) + * Since the pin is toggled on capture, if you change the frequency of the timer you have to adapt the compare value (analogWrite thinks you did) + */ +//#define PWM_FREQUENCY 20000 +//The bottom values are the default and don't need to be redefined +//#define PWM_RESOLUTION 8 +//#define PWM_MAX_DUTY_CYCLE 255 + +// Below SPI and I2C definitions already done in the core +// Could be redefined here if differs from the default one +// SPI Definitions +#define PIN_SPI_MOSI PB15 +#define PIN_SPI_MISO PB14 +#define PIN_SPI_SCK PB13 +#define PIN_SPI_SS PB12 + +// I2C Definitions +#define PIN_WIRE_SDA PB7 +#define PIN_WIRE_SCL PB6 + +// Timer Definitions +//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c +#define TIMER_TONE TIM7 +#define TIMER_SERVO TIM5 +#define TIMER_SERIAL TIM2 + +// UART Definitions +// Define here Serial instance number to map on Serial generic name +#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2) +// DEBUG_UART could be redefined to print on another instance than 'Serial' +//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3 +// DEBUG_UART baudrate, default: 9600 if not defined +//#define DEBUG_UART_BAUDRATE x +// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART +//#define DEBUG_PINNAME_TX PX_n // PinName used for TX + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#define PIN_SERIAL_RX PA10 +#define PIN_SERIAL_TX PA9 + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial1 +#endif -- cgit v1.2.3