From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- .../variants/CHITU_F103/wirish/boards.cpp | 225 +++++++++++++++++++++ .../variants/CHITU_F103/wirish/boards_setup.cpp | 128 ++++++++++++ .../variants/CHITU_F103/wirish/start_c.c | 144 +++++++++++++ .../variants/CHITU_F103/wirish/syscalls.c | 176 ++++++++++++++++ 4 files changed, 673 insertions(+) create mode 100644 buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards.cpp create mode 100644 buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards_setup.cpp create mode 100644 buildroot/share/PlatformIO/variants/CHITU_F103/wirish/start_c.c create mode 100644 buildroot/share/PlatformIO/variants/CHITU_F103/wirish/syscalls.c (limited to 'buildroot/share/PlatformIO/variants/CHITU_F103/wirish') diff --git a/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards.cpp b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards.cpp new file mode 100644 index 0000000..2210e98 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards.cpp @@ -0,0 +1,225 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011, 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file wirish/boards.cpp + * @brief init() and board routines. + * + * This file is mostly interesting for the init() function, which + * configures Flash, the core clocks, and a variety of other available + * peripherals on the board so the rest of Wirish doesn't have to turn + * things on before using them. + * + * Prior to returning, init() calls boardInit(), which allows boards + * to perform any initialization they need to. This file includes a + * weak no-op definition of boardInit(), so boards that don't need any + * special initialization don't have to define their own. + * + * How init() works is chip-specific. See the boards_setup.cpp files + * under e.g. wirish/stm32f1/, wirish/stmf32f2 for the details, but be + * advised: their contents are unstable, and can/will change without + * notice. + */ + +#include +#include +#include +#include +#include +#include "boards_private.h" + +static void setup_flash(void); +static void setup_clocks(void); +static void setup_nvic(void); +static void setup_adcs(void); +static void setup_timers(void); + +/* + * Exported functions + */ + +void init(void) { + setup_flash(); + setup_clocks(); + setup_nvic(); + systick_init(SYSTICK_RELOAD_VAL); + wirish::priv::board_setup_gpio(); + setup_adcs(); + setup_timers(); + wirish::priv::board_setup_usb(); + wirish::priv::series_init(); + boardInit(); +} + +/* Provide a default no-op boardInit(). */ +__weak void boardInit(void) { +} + +/* You could farm this out to the files in boards/ if e.g. it takes + * too long to test on boards with lots of pins. */ +bool boardUsesPin(uint8 pin) { + for (int i = 0; i < BOARD_NR_USED_PINS; i++) { + if (pin == boardUsedPins[i]) { + return true; + } + } + return false; +} + +/* + * Auxiliary routines + */ + +static void setup_flash(void) { + // Turn on as many Flash "go faster" features as + // possible. flash_enable_features() just ignores any flags it + // can't support. + flash_enable_features(FLASH_PREFETCH | FLASH_ICACHE | FLASH_DCACHE); + // Configure the wait states, assuming we're operating at "close + // enough" to 3.3V. + flash_set_latency(FLASH_SAFE_WAIT_STATES); +} + +static void setup_clocks(void) { + // Turn on HSI. We'll switch to and run off of this while we're + // setting up the main PLL. + rcc_turn_on_clk(RCC_CLK_HSI); + + // Turn off and reset the clock subsystems we'll be using, as well + // as the clock security subsystem (CSS). Note that resetting CFGR + // to its default value of 0 implies a switch to HSI for SYSCLK. + RCC_BASE->CFGR = 0x00000000; + rcc_disable_css(); + rcc_turn_off_clk(RCC_CLK_PLL); + rcc_turn_off_clk(RCC_CLK_HSE); + wirish::priv::board_reset_pll(); + // Clear clock readiness interrupt flags and turn off clock + // readiness interrupts. + RCC_BASE->CIR = 0x00000000; +#if !USE_HSI_CLOCK + // Enable HSE, and wait until it's ready. + rcc_turn_on_clk(RCC_CLK_HSE); + while(!rcc_is_clk_ready(RCC_CLK_HSE)) + ; +#endif + // Configure AHBx, APBx, etc. prescalers and the main PLL. + wirish::priv::board_setup_clock_prescalers(); + rcc_configure_pll(&wirish::priv::w_board_pll_cfg); + + // Enable the PLL, and wait until it's ready. + rcc_turn_on_clk(RCC_CLK_PLL); + while(!rcc_is_clk_ready(RCC_CLK_PLL)) + ; + + // Finally, switch to the now-ready PLL as the main clock source. + rcc_switch_sysclk(RCC_CLKSRC_PLL); +} + +/* + * These addresses are where usercode starts when a bootloader is + * present. If no bootloader is present, the user NVIC usually starts + * at the Flash base address, 0x08000000. + */ +#if defined(BOOTLOADER_maple) + #define USER_ADDR_ROM 0x08005000 +#else + #define USER_ADDR_ROM 0x08000000 +#endif +#define USER_ADDR_RAM 0x20000C00 +extern char __text_start__; + +static void setup_nvic(void) { + +nvic_init((uint32)VECT_TAB_ADDR, 0); + +/* Roger Clark. We now control nvic vector table in boards.txt using the build.vect paramater +#ifdef VECT_TAB_FLASH + nvic_init(USER_ADDR_ROM, 0); +#elif defined VECT_TAB_RAM + nvic_init(USER_ADDR_RAM, 0); +#elif defined VECT_TAB_BASE + nvic_init((uint32)0x08000000, 0); +#elif defined VECT_TAB_ADDR + // A numerically supplied value + nvic_init((uint32)VECT_TAB_ADDR, 0); +#else + // Use the __text_start__ value from the linker script; this + // should be the start of the vector table. + nvic_init((uint32)&__text_start__, 0); +#endif + +*/ +} + +static void adc_default_config(adc_dev *dev) { + adc_enable_single_swstart(dev); + adc_set_sample_rate(dev, wirish::priv::w_adc_smp); +} + +static void setup_adcs(void) { + adc_set_prescaler(wirish::priv::w_adc_pre); + adc_foreach(adc_default_config); +} + +static void timer_default_config(timer_dev *dev) { + timer_adv_reg_map *regs = (dev->regs).adv; + const uint16 full_overflow = 0xFFFF; + const uint16 half_duty = 0x8FFF; + + timer_init(dev); + timer_pause(dev); + + regs->CR1 = TIMER_CR1_ARPE; + regs->PSC = 1; + regs->SR = 0; + regs->DIER = 0; + regs->EGR = TIMER_EGR_UG; + switch (dev->type) { + case TIMER_ADVANCED: + regs->BDTR = TIMER_BDTR_MOE | TIMER_BDTR_LOCK_OFF; + // fall-through + case TIMER_GENERAL: + timer_set_reload(dev, full_overflow); + for (uint8 channel = 1; channel <= 4; channel++) { + if (timer_has_cc_channel(dev, channel)) { + timer_set_compare(dev, channel, half_duty); + timer_oc_set_mode(dev, channel, TIMER_OC_MODE_PWM_1, + TIMER_OC_PE); + } + } + // fall-through + case TIMER_BASIC: + break; + } + + timer_generate_update(dev); + timer_resume(dev); +} + +static void setup_timers(void) { + timer_foreach(timer_default_config); +} diff --git a/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards_setup.cpp b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards_setup.cpp new file mode 100644 index 0000000..c3f5247 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards_setup.cpp @@ -0,0 +1,128 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. +*****************************************************************************/ + +/** + * @file wirish/stm32f1/boards_setup.cpp + * @author Marti Bolivar + * @brief STM32F1 chip setup. + * + * This file controls how init() behaves on the STM32F1. Be very + * careful when changing anything here. Many of these values depend + * upon each other. + */ + +#include "boards_private.h" + +#include +#include + +#include +#include + +// Allow boards to provide a PLL multiplier. This is useful for +// e.g. STM32F100 value line MCUs, which use slower multipliers. +// (We're leaving the default to RCC_PLLMUL_9 for now, since that +// works for F103 performance line MCUs, which is all that LeafLabs +// currently officially supports). +#ifndef BOARD_RCC_PLLMUL + #if !USE_HSI_CLOCK + #if F_CPU==128000000 + #define BOARD_RCC_PLLMUL RCC_PLLMUL_16 + #elif F_CPU==72000000 + #define BOARD_RCC_PLLMUL RCC_PLLMUL_9 + #elif F_CPU==48000000 + #define BOARD_RCC_PLLMUL RCC_PLLMUL_6 + #elif F_CPU==16000000 + #define BOARD_RCC_PLLMUL RCC_PLLMUL_2 + #endif + #else + #define BOARD_RCC_PLLMUL RCC_PLLMUL_16 + #endif +#endif + +namespace wirish { + namespace priv { + + static stm32f1_rcc_pll_data pll_data = {BOARD_RCC_PLLMUL}; +#if !USE_HSI_CLOCK + __weak rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSE, &pll_data}; +#else + __weak rcc_pll_cfg w_board_pll_cfg = {RCC_PLLSRC_HSI_DIV_2, &pll_data}; +#endif + __weak adc_prescaler w_adc_pre = ADC_PRE_PCLK2_DIV_6; + __weak adc_smp_rate w_adc_smp = ADC_SMPR_55_5; + + __weak void board_reset_pll(void) { + // TODO + } + + __weak void board_setup_clock_prescalers(void) { + rcc_set_prescaler(RCC_PRESCALER_AHB, RCC_AHB_SYSCLK_DIV_1); + rcc_set_prescaler(RCC_PRESCALER_APB1, RCC_APB1_HCLK_DIV_2); + rcc_set_prescaler(RCC_PRESCALER_APB2, RCC_APB2_HCLK_DIV_1); + rcc_clk_disable(RCC_USB); +#if F_CPU == 72000000 + rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1_5); +#elif F_CPU == 48000000 + rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1); +#endif + } + + __weak void board_setup_gpio(void) { + /** + * PA14 is a pull up pin. But, some V5 boards it start with LOW state! And just behave properly when the Z- PROBE is actived at least once. + * So, if the sensor isnt actived, the PA14 pin will be forever in LOW state, telling Marlin the probe IS ALWAYS ACTIVE, that isnt the case! + * Chitu original firmware seems to start with every pullup PIN with HIGH to workaround this. + * So we are doing the same here. + * This hack only works if applied *before* the GPIO Init, it's the reason I did it here. + */ + #ifdef CHITU_V5_Z_MIN_BUGFIX + GPIOA->regs->BSRR = (1U << PA14); + #endif + gpio_init_all(); + } + + __weak void board_setup_usb(void) { +#ifdef SERIAL_USB +#ifdef GENERIC_BOOTLOADER + // Reset the USB interface on generic boards - developed by Victor PV + gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_OUTPUT_PP); + gpio_write_bit(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit,0); + + for (volatile unsigned int i = 0; i < 512; i++); // Only small delay seems to be needed, and USB pins will get configured in Serial.begin + gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_INPUT_FLOATING); +#endif + Serial.begin(); // Roger Clark. Changed SerialUSB to Serial for Arduino sketch compatibility +#endif + } + + __weak void series_init(void) { + // Initialize AFIO here, too, so peripheral remaps and external + // interrupts work out of the box. + afio_init(); + } + } +} diff --git a/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/start_c.c b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/start_c.c new file mode 100644 index 0000000..d305e6d --- /dev/null +++ b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/start_c.c @@ -0,0 +1,144 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/* + * This file is a modified version of a file obtained from + * CodeSourcery Inc. (now part of Mentor Graphics Corp.), in which the + * following text appeared: + * + * Copyright (c) 2006, 2007 CodeSourcery Inc + * + * The authors hereby grant permission to use, copy, modify, distribute, + * and license this software and its documentation for any purpose, provided + * that existing copyright notices are retained in all copies and that this + * notice is included verbatim in any distributions. No written agreement, + * license, or royalty fee is required for any of the authorized uses. + * Modifications to this software may be copyrighted by their authors + * and need not follow the licensing terms described here, provided that + * the new terms are clearly indicated on the first page of each file where + * they apply. + */ + +#include + +#include +#include +#include + +#include "rcc_private.h" + +#include +#include +#include "usart_private.h" + +#include +#include + +extern void __libc_init_array(void); + +extern int main(int, char**, char**); + +extern void exit(int) __attribute__((noreturn, weak)); + +/* The linker must ensure that these are at least 4-byte aligned. */ +extern char __data_start__, __data_end__; +extern char __bss_start__, __bss_end__; + +struct rom_img_cfg { + int *img_start; +}; + +extern char _lm_rom_img_cfgp; +extern void __lm_error(); +extern void timer_disable_all(); + + /* Turn off ADC */ +extern void adc_disable_all(); + + /* Turn off all USARTs */ +extern void usart_disable_all(); +extern void DisableEverything(); + +void __attribute__((noreturn)) start_c(void) { + struct rom_img_cfg *img_cfg = (struct rom_img_cfg*)&_lm_rom_img_cfgp; + int *src = img_cfg->img_start; + int *dst = (int*)&__data_start__; + int exit_code; + + asm("CPSID I"); + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC_BASE->CR |= 0x00000001U; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ + RCC_BASE->CFGR &= 0xF0FF0000U; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC_BASE->CR &= 0xFEF6FFFFU; + + /* Reset HSEBYP bit */ + RCC_BASE->CR &= 0xFFFBFFFFU; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC_BASE->CFGR &= 0xFF80FFFFU; + + /* Disable all interrupts and clear pending bits */ + RCC_BASE->CIR = 0x009F0000U; + + USART1_BASE->CR1 = 0; + USART1_BASE->CR2 = 0; + USART1_BASE->CR3 = 0; + + memset(SDIO_BASE, 0, sizeof(sdio_reg_map)); + asm("CPSIE I"); + + /* Initialize .data, if necessary. */ + if (src != dst) { + int *end = (int*)&__data_end__; + while (dst < end) { + *dst++ = *src++; + } + } + + /* Zero .bss. */ + dst = (int*)&__bss_start__; + while (dst < (int*)&__bss_end__) { + *dst++ = 0; + } + + /* Run initializers. */ + __libc_init_array(); + + /* Jump to main. */ + exit_code = main(0, 0, 0); + if (exit) { + exit(exit_code); + } + + /* If exit is NULL, make sure we don't return. */ + for (;;) + continue; +} diff --git a/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/syscalls.c b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/syscalls.c new file mode 100644 index 0000000..ec1c34d --- /dev/null +++ b/buildroot/share/PlatformIO/variants/CHITU_F103/wirish/syscalls.c @@ -0,0 +1,176 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * Copyright (c) 2011, 2012 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file wirish/syscalls.c + * @brief newlib stubs + * + * Low level system routines used by newlib for basic I/O and memory + * allocation. You can override most of these. + */ + +#include + +#include +#include +#include + +/* If CONFIG_HEAP_START (or CONFIG_HEAP_END) isn't defined, then + * assume _lm_heap_start (resp. _lm_heap_end) is appropriately set by + * the linker */ +#ifndef CONFIG_HEAP_START +extern char _lm_heap_start; +#define CONFIG_HEAP_START ((void *)&_lm_heap_start) +#endif +#ifndef CONFIG_HEAP_END +extern char _lm_heap_end; +#define CONFIG_HEAP_END ((void *)&_lm_heap_end) +#endif + +/* + * _sbrk -- Increment the program break. + * + * Get incr bytes more RAM (for use by the heap). malloc() and + * friends call this function behind the scenes. + */ +void *_sbrk(int incr) { + static void * pbreak = NULL; /* current program break */ + void * ret; + + if (pbreak == NULL) { + pbreak = CONFIG_HEAP_START; + } + + if ((CONFIG_HEAP_END - pbreak < incr) || + (pbreak - CONFIG_HEAP_START < -incr)) { + errno = ENOMEM; + return (void *)-1; + } + + ret = pbreak; + pbreak += incr; + return ret; +} + +__weak int _open(const char *path __attribute__((unused)), int flags __attribute__((unused)), ...) { + return 1; +} + +__weak int _close(int fd __attribute__((unused))) { + return 0; +} + +__weak int _fstat(int fd __attribute__((unused)), struct stat *st) { + st->st_mode = S_IFCHR; + return 0; +} + +__weak int _isatty(int fd __attribute__((unused))) { + return 1; +} + +__weak int isatty(int fd __attribute__((unused))) { + return 1; +} + +__weak int _lseek(int fd __attribute__((unused)), off_t pos __attribute__((unused)), int whence __attribute__((unused))) { + return -1; +} + +__weak unsigned char getch(void) { + return 0; +} + + +__weak int _read(int fd __attribute__((unused)), char *buf, size_t cnt __attribute__((unused))) { + *buf = getch(); + + return 1; +} + +__weak void putch(unsigned char c __attribute__((unused))) { +} + +__weak void cgets(char *s, int bufsize) { + char *p; + int c; + int i; + + for (i = 0; i < bufsize; i++) { + *(s+i) = 0; + } +// memset(s, 0, bufsize); + + p = s; + + for (p = s; p < s + bufsize-1;) { + c = getch(); + switch (c) { + case '\r' : + case '\n' : + putch('\r'); + putch('\n'); + *p = '\n'; + return; + + case '\b' : + if (p > s) { + *p-- = 0; + putch('\b'); + putch(' '); + putch('\b'); + } + break; + + default : + putch(c); + *p++ = c; + break; + } + } + return; +} + +__weak int _write(int fd __attribute__((unused)), const char *buf, size_t cnt) { + int i; + + for (i = 0; i < cnt; i++) + putch(buf[i]); + + return cnt; +} + +/* Override fgets() in newlib with a version that does line editing */ +__weak char *fgets(char *s, int bufsize, void *f __attribute__((unused))) { + cgets(s, bufsize); + return s; +} + +__weak void _exit(int exitcode __attribute__((unused))) { + while (1) + ; +} -- cgit v1.2.3