From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- .../PlatformIO/variants/MARLIN_F103Zx/variant.h | 232 +++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_F103Zx/variant.h (limited to 'buildroot/share/PlatformIO/variants/MARLIN_F103Zx/variant.h') diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/variant.h new file mode 100644 index 0000000..fb878f8 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103Zx/variant.h @@ -0,0 +1,232 @@ +/* + ******************************************************************************* + * Copyright (c) 2019, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ +#define PA0 0 +#define PA1 1 +#define PA2 2 +#define PA3 3 +#define PA4 4 +#define PA5 5 +#define PA6 6 +#define PA7 7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 + +#define PB0 16 +#define PB1 17 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 + +#define PC0 32 +#define PC1 33 +#define PC2 34 +#define PC3 35 +#define PC4 36 +#define PC5 37 +#define PC6 38 +#define PC7 39 +#define PC8 40 +#define PC9 41 +#define PC10 42 +#define PC11 43 +#define PC12 44 +#define PC13 45 +#define PC14 46 +#define PC15 47 + +#define PD0 48 +#define PD1 49 +#define PD2 50 +#define PD3 51 +#define PD4 52 +#define PD5 53 +#define PD6 54 +#define PD7 55 +#define PD8 56 +#define PD9 57 +#define PD10 58 +#define PD11 59 +#define PD12 60 +#define PD13 61 +#define PD14 62 +#define PD15 63 + +#define PE0 64 +#define PE1 65 +#define PE2 66 +#define PE3 67 +#define PE4 68 +#define PE5 69 +#define PE6 70 +#define PE7 71 +#define PE8 72 +#define PE9 73 +#define PE10 74 +#define PE11 75 +#define PE12 76 +#define PE13 77 +#define PE14 78 +#define PE15 79 + +#define PF0 80 +#define PF1 81 +#define PF2 82 +#define PF3 83 +#define PF4 84 +#define PF5 85 +#define PF6 86 +#define PF7 87 +#define PF8 88 +#define PF9 89 +#define PF10 90 +#define PF11 91 +#define PF12 92 +#define PF13 93 +#define PF14 94 +#define PF15 95 + +#define PG0 96 +#define PG1 97 +#define PG2 98 +#define PG3 99 +#define PG4 100 +#define PG5 101 +#define PG6 102 +#define PG7 103 +#define PG8 104 +#define PG9 105 +#define PG10 106 +#define PG11 107 +#define PG12 108 +#define PG13 109 +#define PG14 110 +#define PG15 111 + +// This must be a literal +#define NUM_DIGITAL_PINS 112 +#define NUM_ANALOG_INPUTS 21 + +// On-board LED pin number +#ifdef ARDUINO_VCCGND_F103ZET6_MINI +#define LED_BUILTIN PG15 +#elif defined(ARDUINO_VCCGND_F103ZET6) +#define LED_BUILTIN PC13 +#elif !defined(LED_BUILTIN) +#define LED_BUILTIN PC13 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PB1 +#endif + +// SPI Definitions +#ifdef ARDUINO_VCCGND_F103ZET6 +#define PIN_SPI_SS PA15 +#define PIN_SPI_MOSI PB5 +#define PIN_SPI_MISO PB4 +#define PIN_SPI_SCK PB3 +#else +#define PIN_SPI_SS PC4 +#define PIN_SPI_MOSI PA7 +#define PIN_SPI_MISO PA6 +#define PIN_SPI_SCK PA5 +#endif + +// I2C Definitions +#define PIN_WIRE_SDA PB7 +#define PIN_WIRE_SCL PB6 + +// Timer Definitions (optional) +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#define TIMER_TONE TIM6 +#define TIMER_SERVO TIM7 + +// UART Definitions +// Define here Serial instance number to map on Serial generic name +#define SERIAL_UART_INSTANCE 1 + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#define PIN_SERIAL_RX PA10 +#define PIN_SERIAL_TX PA9 + +// Default pin used for 'Serial2' instance +#define PIN_SERIAL2_RX PA3 +#define PIN_SERIAL2_TX PA2 + +// Default pin used for 'Serial3' instance +#define PIN_SERIAL3_RX PB11 +#define PIN_SERIAL3_TX PB10 + +/* Extra HAL modules */ +#define HAL_DAC_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial1 +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ -- cgit v1.2.3