From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001 From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> Date: Thu, 4 Mar 2021 22:54:23 +0500 Subject: Initial commit --- .../PlatformIO/variants/STEVAL_F401VE/variant.h | 327 +++++++++++++++++++++ 1 file changed, 327 insertions(+) create mode 100644 buildroot/share/PlatformIO/variants/STEVAL_F401VE/variant.h (limited to 'buildroot/share/PlatformIO/variants/STEVAL_F401VE/variant.h') diff --git a/buildroot/share/PlatformIO/variants/STEVAL_F401VE/variant.h b/buildroot/share/PlatformIO/variants/STEVAL_F401VE/variant.h new file mode 100644 index 0000000..df7295a --- /dev/null +++ b/buildroot/share/PlatformIO/variants/STEVAL_F401VE/variant.h @@ -0,0 +1,327 @@ +/* + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ +#ifdef ARDUINO_STEVAL + + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ +// USART1_MAIN +#define PA9 0 //TX +#define PA10 1 //RX + +// WIFI (USART2) +#define PD3 2 // CTS +#define PD4 3 // RTS +#define PD5 4 // TX +#define PD6 5 // RX +#define PB5 6 // WIFI_WAKEUP +#define PE11 7 // WIFI_RESET +#define PE12 8 // WIFI_BOOT + +// STATUS_LED +#define PE1 9 // STATUS_LED + +// SPI USER +#define PB12 10 // SPI_CS +#define PB15 11 // SPI_MOSI +#define PB14 12 // SPI_MISO +#define PB13 13 // SPI_SCK + +// I2C USER +#define PB7 14 // SDA +#define PB6 15 // SCL + +// SPI +#define PA4 16 // SPI_CS +#define PA5 17 // SPI_SCK +#define PA6 18 // SPI_MISO +#define PA7 19 // SPI_MOSI + +// JTAG +#define PA13 20 // JTAG_TMS/SWDIO +#define PA14 21 // JTAG_TCK/SWCLK +#define PB3 22 // JTAG_TDO/SWO + +// SDCARD +#define PC8 23 // SDIO_D0 +#define PC9 24 // SDIO_D1 +#define PA15 25 // SD_CARD_DETECT +#define PC10 26 // SDIO_D2 +#define PC11 27 // SDIO_D3 +#define PC12 28 // SDIO_CK +#define PD2 29 // SDIO_CMD + +// OTG +#define PA11 30 //OTG_DM +#define PA12 31 //OTG_DP + +// IR/PROBE +#define PD1 32 //IR_OUT +#define PC1 33 //IR_ON + +// USER_PINS +#define PD7 34 // USER3 +#define PB9 35 // USER1 +#define PE0 36 // USER2 +#define PB4 37 // USER4 + +// USERKET +#define PE7 38 // USER_BUTTON + +// ENDSTOPS +#define PD8 39 // X_STOP +#define PD9 40 // Y_STOP +#define PD10 41 // Z_STOP +#define PD11 42 // U_STOP +#define PA8 43 // V_STOP +#define PD0 44 // W_STOP + +// HEATERS +#define PD13 45 // BED_HEAT_2 +#define PD14 46 // BED_HEAT_1 +#define PD15 47 // BED_HEAT_3 +#define PC7 48 // E1_HEAT_PWM +#define PB0 49 // E2_HEAT_PWM +#define PB1 50 // E3_HEAT_PWM + +// THERMISTOR +#define PC2 51 // BED_THERMISTOR_1 +#define PC3 52 // BED_THERMISTOR_2 +#define PA3 53 // BED_THERMISTOR_3 +#define PA0 54 // E1_THERMISTOR +#define PA1 55 // E2_THERMISTOR +#define PA2 56 // E3_THERMISTOR + +// FANS +#define PC4 57 // E1_FAN +#define PC5 58 // E2_FAN +#define PE8 59 // E3_FAN + +// X_MOTOR +#define PE13 60 // X_RESET +#define PE14 61 // X_PWM +#define PE15 62 // X_DIR + +// Y_MOTOR +#define PE10 63 // Y_RESET +#define PB10 64 // Y_PWM +#define PE9 65 // Y_DIR + +// Z_MOTOR +#define PC15 66 // Z_RESET +#define PC6 67 // Z_PWM +#define PC0 68 // Z_DIR + +// E1_MOTOR +#define PC14 69 // E1_RESET +#define PC13 70 // E1_DIR +#define PD12 71 // E1_PWM + +// E2_MOTOR +#define PE4 72 // E2_RESET +#define PE5 73 // E2_PWM +#define PE6 74 // E2_DIR + +// E3_MOTOR +#define PE3 75 // E3_RESET +#define PE2 76 // E3_DIR +#define PB8 77 // E3_PWM + +// This must be a literal +#define NUM_DIGITAL_PINS 78 +// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS +#define NUM_ANALOG_INPUTS 6 +#define NUM_ANALOG_FIRST 51 + +// On-board LED pin number +#define LED_BUILTIN PE1 +#define LED_GREEN LED_BUILTIN + +// On-board user button +#define USER_BTN PE7 + +// UART Definitions +#define SERIAL_UART_INSTANCE 1 // Connected to ST-Link +//#define SERIAL_UART_INSTANCE 2 // Connected to WIFI + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#if SERIAL_UART_INSTANCE == 1 // ST-Link & J23 + #define PIN_SERIAL_RX PA10 + #define PIN_SERIAL_TX PA9 +#elif SERIAL_UART_INSTANCE == 2 // WIFI interface + #define PIN_SERIAL2_RX PD6 + #define PIN_SERIAL2_TX PD5 +#else + #error "Invalid setting for SERIAL_UART_INSTANCE." +#endif + +// Timer Definitions +#define TIMER_SERVO TIM4 // TIMER_SERVO must be defined in this file +#define TIMER_TONE TIM5 // TIMER_TONE must be defined in this file + +/* SD detect signal */ +/* + * By default, R67 is not provided, so SD card detect is not used. + * Note: SD CD (pin 16 of expansion connector J23) can be connected + * to GND in order to be able to use SD_DETECT_PIN + */ +/*#define SD_DETECT_PIN PA15*/ + +/* HAL configuration */ +#define HSE_VALUE 25000000U + +/* Extra HAL modules */ +#define HAL_SD_MODULE_ENABLED + +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial1 +#endif + +#endif // _VARIANT_ARDUINO_STM32_ + +// PA0 54 // E1_THERMISTOR +// PA1 55 // E2_THERMISTOR +// PA2 56 // E3_THERMISTOR +// PA3 53 // BED_THERMISTOR_3 +// PA4 16 // SPI_CS +// PA5 17 // SPI_SCK +// PA6 18 // SPI_MISO +// PA7 19 // SPI_MOSI +// PA8 43 // V_STOP +// PA9 0 //TX +// PA10 1 //RX +// PA11 30 //OTG_DM +// PA12 31 //OTG_DP +// PA13 20 // JTAG_TMS/SWDIO +// PA14 21 // JTAG_TCK/SWCLK +// PA15 25 // SD_CARD_DETECT +// PB0 49 // E2_HEAT_PWM +// PB1 50 // E3_HEAT_PWM +// PB3 22 // JTAG_TDO/SWO +// PB4 37 // USER4 +// PB5 6 // WIFI_WAKEUP +// PB6 15 // SCL +// PB7 14 // SDA +// PB8 77 // E3_PWM +// PB9 35 // USER1 +// PB10 64 // Y_PWM +// PB12 10 // SPI_CS +// PB13 13 // SPI_SCK +// PB14 12 // SPI_MISO +// PB15 11 // SPI_MOSI +// PC0 68 // Z_DIR +// PC1 33 //IR_ON +// PC2 51 // BED_THERMISTOR_1 +// PC3 52 // BED_THERMISTOR_2 +// PC4 57 // E1_FAN +// PC5 58 // E2_FAN +// PC6 67 // Z_PWM +// PC7 48 // E1_HEAT_PWM +// PC8 23 // SDIO_D0 +// PC9 24 // SDIO_D1 +// PC10 26 // SDIO_D2 +// PC11 27 // SDIO_D3 +// PC12 28 // SDIO_CK +// PC13 70 // E1_DIR +// PC14 69 // E1_RESET +// PC15 66 // Z_RESET +// PD0 44 // W_STOP +// PD1 32 //IR_OUT +// PD2 29 // SDIO_CMD +// PD3 2 // CTS +// PD4 3 // RTS +// PD5 4 // TX +// PD6 5 // RX +// PD7 34 // USER3 +// PD8 39 // X_STOP +// PD9 40 // Y_STOP +// PD10 41 // Z_STOP +// PD11 42 // U_STOP +// PD12 71 // E1_PWM +// PD13 45 // BED_HEAT_2 +// PD14 46 // BED_HEAT_1 +// PD15 47 // BED_HEAT_3 +// PE0 36 // USER2 +// PE1 9 // STATUS_LED +// PE2 76 // E3_DIR +// PE3 75 // E3_RESET +// PE4 72 // E2_RESET +// PE5 73 // E2_PWM +// PE6 74 // E2_DIR +// PE7 38 // USER_BUTTON +// PE8 59 // E3_FAN +// PE9 65 // Y_DIR +// PE10 63 // Y_RESET +// PE11 7 // WIFI_RESET +// PE12 8 // WIFI_BOOT +// PE13 60 // X_RESET +// PE14 61 // X_PWM +// PE15 62 // X_DIR -- cgit v1.2.3