From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 buildroot/tests/BIGTREE_GTR_V1_0-tests | 60 ++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 buildroot/tests/BIGTREE_GTR_V1_0-tests

(limited to 'buildroot/tests/BIGTREE_GTR_V1_0-tests')

diff --git a/buildroot/tests/BIGTREE_GTR_V1_0-tests b/buildroot/tests/BIGTREE_GTR_V1_0-tests
new file mode 100644
index 0000000..adc850d
--- /dev/null
+++ b/buildroot/tests/BIGTREE_GTR_V1_0-tests
@@ -0,0 +1,60 @@
+#!/usr/bin/env bash
+#
+# Build tests for BigTreeTech GTR 1.0
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
+opt_set SERIAL_PORT -1
+opt_set EXTRUDERS 8
+opt_set TEMP_SENSOR_1 1
+opt_set TEMP_SENSOR_2 1
+opt_set TEMP_SENSOR_3 1
+opt_set TEMP_SENSOR_4 1
+opt_set TEMP_SENSOR_5 1
+opt_set TEMP_SENSOR_6 1
+opt_set TEMP_SENSOR_7 1
+# Not necessary to enable auto-fan for all extruders to hit problematic code paths
+opt_set E0_AUTO_FAN_PIN PC10
+opt_set E1_AUTO_FAN_PIN PC11
+opt_set E2_AUTO_FAN_PIN PC12
+opt_set X_DRIVER_TYPE TMC2208
+opt_set Y_DRIVER_TYPE TMC2130
+opt_set NEOPIXEL_PIN PF13
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING
+opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
+opt_set FIL_RUNOUT_PIN 3
+opt_set FIL_RUNOUT2_PIN 4
+opt_set FIL_RUNOUT3_PIN 5
+opt_set FIL_RUNOUT4_PIN 6
+opt_set FIL_RUNOUT5_PIN 7
+opt_set FIL_RUNOUT6_PIN 8
+opt_set FIL_RUNOUT7_PIN 9
+opt_set FIL_RUNOUT8_PIN 10
+opt_set FIL_RUNOUT4_STATE HIGH
+opt_enable FIL_RUNOUT4_PULLUP
+opt_set FIL_RUNOUT8_STATE HIGH
+opt_enable FIL_RUNOUT8_PULLUP
+exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
+opt_set SERIAL_PORT -1
+opt_set EXTRUDERS 6
+opt_set TEMP_SENSOR_1 1
+opt_set TEMP_SENSOR_2 1
+opt_set TEMP_SENSOR_3 1
+opt_set TEMP_SENSOR_4 1
+opt_set TEMP_SENSOR_5 1
+opt_set NUM_Z_STEPPER_DRIVERS 3
+opt_set DEFAULT_Kp_LIST "{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }"
+opt_set DEFAULT_Ki_LIST "{ 1.08 }"
+opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }"
+opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND
+exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" "$3"
+
+# clean up
+restore_configs
-- 
cgit v1.2.3