From e8701195e66f2d27ffe17fb514eae8173795aaf7 Mon Sep 17 00:00:00 2001
From: Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com>
Date: Thu, 4 Mar 2021 22:54:23 +0500
Subject: Initial commit

---
 buildroot/tests/LPC1768-tests | 55 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 buildroot/tests/LPC1768-tests

(limited to 'buildroot/tests/LPC1768-tests')

diff --git a/buildroot/tests/LPC1768-tests b/buildroot/tests/LPC1768-tests
new file mode 100644
index 0000000..27d2fbf
--- /dev/null
+++ b/buildroot/tests/LPC1768-tests
@@ -0,0 +1,55 @@
+#!/usr/bin/env bash
+#
+# Build tests for LPC1768 (NXP ARM Cortex-M3)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+#restore_configs
+#opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
+#exec_test $1 $2 "Default Configuration" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
+opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED
+opt_set NEOPIXEL_PIN P1_16
+exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
+
+#restore_configs
+#use_example_configs Mks/Sbase
+#exec_test $1 $2 "MKS SBASE Example Config" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_MKS_SBASE
+opt_set EXTRUDERS 2
+opt_set TEMP_SENSOR_1 1
+opt_set NUM_SERVOS 2
+opt_set SERVO_DELAY "{ 300, 300 }"
+opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER
+exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB
+opt_set EXTRUDERS 2
+opt_set TEMP_SENSOR_1 -1
+opt_set TEMP_SENSOR_BED 5
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
+           FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \
+           NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
+           PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
+           HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT \
+           LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
+           SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER
+opt_set GRID_MAX_POINTS_X 16
+opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
+opt_set NOZZLE_CLEAN_MIN_TEMP 170
+exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
+
+# clean up
+restore_configs
-- 
cgit v1.2.3