/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * G29.cpp - Auto Bed Leveling */ #include "../../../inc/MarlinConfig.h" #if HAS_ABL_NOT_UBL #include "../../gcode.h" #include "../../../feature/bedlevel/bedlevel.h" #include "../../../module/motion.h" #include "../../../module/planner.h" #include "../../../module/stepper.h" #include "../../../module/probe.h" #include "../../queue.h" #if ENABLED(PROBE_TEMP_COMPENSATION) #include "../../../feature/probe_temp_comp.h" #include "../../../module/temperature.h" #endif #if HAS_DISPLAY #include "../../../lcd/marlinui.h" #endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) #include "../../../libs/least_squares_fit.h" #endif #if ABL_PLANAR #include "../../../libs/vector_3.h" #endif #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) #include "../../../core/debug_out.h" #if ENABLED(EXTENSIBLE_UI) #include "../../../lcd/extui/ui_api.h" #endif #if ENABLED(DWIN_CREALITY_LCD) #include "../../../lcd/dwin/e3v2/dwin.h" #endif #if HAS_MULTI_HOTEND #include "../../../module/tool_change.h" #endif #if ABL_GRID #if ENABLED(PROBE_Y_FIRST) #define PR_OUTER_VAR meshCount.x #define PR_OUTER_END abl_grid_points.x #define PR_INNER_VAR meshCount.y #define PR_INNER_END abl_grid_points.y #else #define PR_OUTER_VAR meshCount.y #define PR_OUTER_END abl_grid_points.y #define PR_INNER_VAR meshCount.x #define PR_INNER_END abl_grid_points.x #endif #endif #define G29_RETURN(b) return TERN_(G29_RETRY_AND_RECOVER, b) /** * G29: Detailed Z probe, probes the bed at 3 or more points. * Will fail if the printer has not been homed with G28. * * Enhanced G29 Auto Bed Leveling Probe Routine * * O Auto-level only if needed * * D Dry-Run mode. Just evaluate the bed Topology - Don't apply * or alter the bed level data. Useful to check the topology * after a first run of G29. * * J Jettison current bed leveling data * * V Set the verbose level (0-4). Example: "G29 V3" * * Parameters With LINEAR leveling only: * * P Set the size of the grid that will be probed (P x P points). * Example: "G29 P4" * * X Set the X size of the grid that will be probed (X x Y points). * Example: "G29 X7 Y5" * * Y Set the Y size of the grid that will be probed (X x Y points). * * T Generate a Bed Topology Report. Example: "G29 P5 T" for a detailed report. * This is useful for manual bed leveling and finding flaws in the bed (to * assist with part placement). * Not supported by non-linear delta printer bed leveling. * * Parameters With LINEAR and BILINEAR leveling only: * * S Set the XY travel speed between probe points (in units/min) * * H Set bounds to a centered square H x H units in size * * -or- * * F Set the Front limit of the probing grid * B Set the Back limit of the probing grid * L Set the Left limit of the probing grid * R Set the Right limit of the probing grid * * Parameters with DEBUG_LEVELING_FEATURE only: * * C Make a totally fake grid with no actual probing. * For use in testing when no probing is possible. * * Parameters with BILINEAR leveling only: * * Z Supply an additional Z probe offset * * Extra parameters with PROBE_MANUALLY: * * To do manual probing simply repeat G29 until the procedure is complete. * The first G29 accepts parameters. 'G29 Q' for status, 'G29 A' to abort. * * Q Query leveling and G29 state * * A Abort current leveling procedure * * Extra parameters with BILINEAR only: * * W Write a mesh point. (If G29 is idle.) * I X index for mesh point * J Y index for mesh point * X X for mesh point, overrides I * Y Y for mesh point, overrides J * Z Z for mesh point. Otherwise, raw current Z. * * Without PROBE_MANUALLY: * * E By default G29 will engage the Z probe, test the bed, then disengage. * Include "E" to engage/disengage the Z probe for each sample. * There's no extra effect if you have a fixed Z probe. */ G29_TYPE GcodeSuite::G29() { reset_stepper_timeout(); const bool seenQ = EITHER(DEBUG_LEVELING_FEATURE, PROBE_MANUALLY) && parser.seen('Q'); // G29 Q is also available if debugging #if ENABLED(DEBUG_LEVELING_FEATURE) const uint8_t old_debug_flags = marlin_debug_flags; if (seenQ) marlin_debug_flags |= MARLIN_DEBUG_LEVELING; DEBUG_SECTION(log_G29, "G29", DEBUGGING(LEVELING)); if (DEBUGGING(LEVELING)) log_machine_info(); marlin_debug_flags = old_debug_flags; if (DISABLED(PROBE_MANUALLY) && seenQ) G29_RETURN(false); #endif const bool seenA = TERN0(PROBE_MANUALLY, parser.seen('A')), no_action = seenA || seenQ, faux = ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(PROBE_MANUALLY) ? parser.boolval('C') : no_action; if (!no_action && planner.leveling_active && parser.boolval('O')) { // Auto-level only if needed if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Auto-level not needed, skip"); G29_RETURN(false); } // Send 'N' to force homing before G29 (internal only) if (parser.seen('N')) process_subcommands_now_P(TERN(G28_L0_ENSURES_LEVELING_OFF, PSTR("G28L0"), G28_STR)); // Don't allow auto-leveling without homing first if (homing_needed_error()) G29_RETURN(false); // Define local vars 'static' for manual probing, 'auto' otherwise #define ABL_VAR TERN_(PROBE_MANUALLY, static) ABL_VAR int verbose_level; ABL_VAR xy_pos_t probePos; ABL_VAR float measured_z; ABL_VAR bool dryrun, abl_should_enable; #if EITHER(PROBE_MANUALLY, AUTO_BED_LEVELING_LINEAR) ABL_VAR int abl_probe_index; #endif #if ABL_GRID #if ENABLED(PROBE_MANUALLY) ABL_VAR xy_int8_t meshCount; #endif ABL_VAR xy_pos_t probe_position_lf, probe_position_rb; ABL_VAR xy_float_t gridSpacing = { 0, 0 }; #if ENABLED(AUTO_BED_LEVELING_LINEAR) ABL_VAR bool do_topography_map; ABL_VAR xy_uint8_t abl_grid_points; #else // Bilinear constexpr xy_uint8_t abl_grid_points = { GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y }; #endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) ABL_VAR int abl_points; #else int constexpr abl_points = GRID_MAX_POINTS; #endif #if ENABLED(AUTO_BED_LEVELING_BILINEAR) ABL_VAR float zoffset; #elif ENABLED(AUTO_BED_LEVELING_LINEAR) ABL_VAR int indexIntoAB[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; ABL_VAR float eqnAMatrix[(GRID_MAX_POINTS) * 3], // "A" matrix of the linear system of equations eqnBVector[GRID_MAX_POINTS], // "B" vector of Z points mean; #endif #elif ENABLED(AUTO_BED_LEVELING_3POINT) #if ENABLED(PROBE_MANUALLY) int constexpr abl_points = 3; // used to show total points #endif vector_3 points[3]; probe.get_three_points(points); #endif // AUTO_BED_LEVELING_3POINT #if ENABLED(AUTO_BED_LEVELING_LINEAR) struct linear_fit_data lsf_results; #endif /** * On the initial G29 fetch command parameters. */ if (!g29_in_progress) { TERN_(HAS_MULTI_HOTEND, if (active_extruder) tool_change(0)); #if EITHER(PROBE_MANUALLY, AUTO_BED_LEVELING_LINEAR) abl_probe_index = -1; #endif abl_should_enable = planner.leveling_active; #if ENABLED(AUTO_BED_LEVELING_BILINEAR) const bool seen_w = parser.seen('W'); if (seen_w) { if (!leveling_is_valid()) { SERIAL_ERROR_MSG("No bilinear grid"); G29_RETURN(false); } const float rz = parser.seenval('Z') ? RAW_Z_POSITION(parser.value_linear_units()) : current_position.z; if (!WITHIN(rz, -10, 10)) { SERIAL_ERROR_MSG("Bad Z value"); G29_RETURN(false); } const float rx = RAW_X_POSITION(parser.linearval('X', NAN)), ry = RAW_Y_POSITION(parser.linearval('Y', NAN)); int8_t i = parser.byteval('I', -1), j = parser.byteval('J', -1); if (!isnan(rx) && !isnan(ry)) { // Get nearest i / j from rx / ry i = (rx - bilinear_start.x + 0.5 * gridSpacing.x) / gridSpacing.x; j = (ry - bilinear_start.y + 0.5 * gridSpacing.y) / gridSpacing.y; LIMIT(i, 0, GRID_MAX_POINTS_X - 1); LIMIT(j, 0, GRID_MAX_POINTS_Y - 1); } if (WITHIN(i, 0, GRID_MAX_POINTS_X - 1) && WITHIN(j, 0, GRID_MAX_POINTS_Y)) { set_bed_leveling_enabled(false); z_values[i][j] = rz; TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate()); TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(i, j, rz)); set_bed_leveling_enabled(abl_should_enable); if (abl_should_enable) report_current_position(); } G29_RETURN(false); } // parser.seen('W') #else constexpr bool seen_w = false; #endif // Jettison bed leveling data if (!seen_w && parser.seen('J')) { reset_bed_level(); G29_RETURN(false); } verbose_level = parser.intval('V'); if (!WITHIN(verbose_level, 0, 4)) { SERIAL_ECHOLNPGM("?(V)erbose level implausible (0-4)."); G29_RETURN(false); } dryrun = parser.boolval('D') || TERN0(PROBE_MANUALLY, no_action); #if ENABLED(AUTO_BED_LEVELING_LINEAR) incremental_LSF_reset(&lsf_results); do_topography_map = verbose_level > 2 || parser.boolval('T'); // X and Y specify points in each direction, overriding the default // These values may be saved with the completed mesh abl_grid_points.set( parser.byteval('X', GRID_MAX_POINTS_X), parser.byteval('Y', GRID_MAX_POINTS_Y) ); if (parser.seenval('P')) abl_grid_points.x = abl_grid_points.y = parser.value_int(); if (!WITHIN(abl_grid_points.x, 2, GRID_MAX_POINTS_X)) { SERIAL_ECHOLNPGM("?Probe points (X) implausible (2-" STRINGIFY(GRID_MAX_POINTS_X) ")."); G29_RETURN(false); } if (!WITHIN(abl_grid_points.y, 2, GRID_MAX_POINTS_Y)) { SERIAL_ECHOLNPGM("?Probe points (Y) implausible (2-" STRINGIFY(GRID_MAX_POINTS_Y) ")."); G29_RETURN(false); } abl_points = abl_grid_points.x * abl_grid_points.y; mean = 0; #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) zoffset = parser.linearval('Z'); #endif #if ABL_GRID xy_probe_feedrate_mm_s = MMM_TO_MMS(parser.linearval('S', XY_PROBE_SPEED)); const float x_min = probe.min_x(), x_max = probe.max_x(), y_min = probe.min_y(), y_max = probe.max_y(); if (parser.seen('H')) { const int16_t size = (int16_t)parser.value_linear_units(); probe_position_lf.set(_MAX((X_CENTER) - size / 2, x_min), _MAX((Y_CENTER) - size / 2, y_min)); probe_position_rb.set(_MIN(probe_position_lf.x + size, x_max), _MIN(probe_position_lf.y + size, y_max)); } else { probe_position_lf.set(parser.linearval('L', x_min), parser.linearval('F', y_min)); probe_position_rb.set(parser.linearval('R', x_max), parser.linearval('B', y_max)); } if (!probe.good_bounds(probe_position_lf, probe_position_rb)) { if (DEBUGGING(LEVELING)) { DEBUG_ECHOLNPAIR("G29 L", probe_position_lf.x, " R", probe_position_rb.x, " F", probe_position_lf.y, " B", probe_position_rb.y); } SERIAL_ECHOLNPGM("? (L,R,F,B) out of bounds."); G29_RETURN(false); } // Probe at the points of a lattice grid gridSpacing.set((probe_position_rb.x - probe_position_lf.x) / (abl_grid_points.x - 1), (probe_position_rb.y - probe_position_lf.y) / (abl_grid_points.y - 1)); #endif // ABL_GRID if (verbose_level > 0) { SERIAL_ECHOPGM("G29 Auto Bed Leveling"); if (dryrun) SERIAL_ECHOPGM(" (DRYRUN)"); SERIAL_EOL(); } planner.synchronize(); #if ENABLED(AUTO_BED_LEVELING_3POINT) if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> 3-point Leveling"); points[0].z = points[1].z = points[2].z = 0; // Probe at 3 arbitrary points #endif #if BOTH(AUTO_BED_LEVELING_BILINEAR, EXTENSIBLE_UI) ExtUI::onMeshLevelingStart(); #endif if (!faux) { remember_feedrate_scaling_off(); #if ENABLED(PREHEAT_BEFORE_LEVELING) if (!dryrun) probe.preheat_for_probing(LEVELING_NOZZLE_TEMP, LEVELING_BED_TEMP); #endif } // Disable auto bed leveling during G29. // Be formal so G29 can be done successively without G28. if (!no_action) set_bed_leveling_enabled(false); // Deploy certain probes before starting probing #if HAS_BED_PROBE if (ENABLED(BLTOUCH)) do_z_clearance(Z_CLEARANCE_DEPLOY_PROBE); else if (probe.deploy()) { set_bed_leveling_enabled(abl_should_enable); G29_RETURN(false); } #endif #if ENABLED(AUTO_BED_LEVELING_BILINEAR) if (TERN1(PROBE_MANUALLY, !no_action) && (gridSpacing != bilinear_grid_spacing || probe_position_lf != bilinear_start) ) { // Reset grid to 0.0 or "not probed". (Also disables ABL) reset_bed_level(); // Initialize a grid with the given dimensions bilinear_grid_spacing = gridSpacing; bilinear_start = probe_position_lf; // Can't re-enable (on error) until the new grid is written abl_should_enable = false; } #endif // AUTO_BED_LEVELING_BILINEAR } // !g29_in_progress #if ENABLED(PROBE_MANUALLY) // For manual probing, get the next index to probe now. // On the first probe this will be incremented to 0. if (!no_action) { ++abl_probe_index; g29_in_progress = true; } // Abort current G29 procedure, go back to idle state if (seenA && g29_in_progress) { SERIAL_ECHOLNPGM("Manual G29 aborted"); SET_SOFT_ENDSTOP_LOOSE(false); set_bed_leveling_enabled(abl_should_enable); g29_in_progress = false; TERN_(LCD_BED_LEVELING, ui.wait_for_move = false); } // Query G29 status if (verbose_level || seenQ) { SERIAL_ECHOPGM("Manual G29 "); if (g29_in_progress) { SERIAL_ECHOPAIR("point ", _MIN(abl_probe_index + 1, abl_points)); SERIAL_ECHOLNPAIR(" of ", abl_points); } else SERIAL_ECHOLNPGM("idle"); } if (no_action) G29_RETURN(false); if (abl_probe_index == 0) { // For the initial G29 S2 save software endstop state SET_SOFT_ENDSTOP_LOOSE(true); // Move close to the bed before the first point do_blocking_move_to_z(0); } else { #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT) const uint16_t index = abl_probe_index - 1; #endif // For G29 after adjusting Z. // Save the previous Z before going to the next point measured_z = current_position.z; #if ENABLED(AUTO_BED_LEVELING_LINEAR) mean += measured_z; eqnBVector[index] = measured_z; eqnAMatrix[index + 0 * abl_points] = probePos.x; eqnAMatrix[index + 1 * abl_points] = probePos.y; eqnAMatrix[index + 2 * abl_points] = 1; incremental_LSF(&lsf_results, probePos, measured_z); #elif ENABLED(AUTO_BED_LEVELING_3POINT) points[index].z = measured_z; #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) const float newz = measured_z + zoffset; z_values[meshCount.x][meshCount.y] = newz; TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(meshCount, newz)); if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR_P(PSTR("Save X"), meshCount.x, SP_Y_STR, meshCount.y, SP_Z_STR, measured_z + zoffset); #endif } // // If there's another point to sample, move there with optional lift. // #if ABL_GRID // Skip any unreachable points while (abl_probe_index < abl_points) { // Set meshCount.x, meshCount.y based on abl_probe_index, with zig-zag PR_OUTER_VAR = abl_probe_index / PR_INNER_END; PR_INNER_VAR = abl_probe_index - (PR_OUTER_VAR * PR_INNER_END); // Probe in reverse order for every other row/column const bool zig = (PR_OUTER_VAR & 1); // != ((PR_OUTER_END) & 1); if (zig) PR_INNER_VAR = (PR_INNER_END - 1) - PR_INNER_VAR; probePos = probe_position_lf + gridSpacing * meshCount.asFloat(); TERN_(AUTO_BED_LEVELING_LINEAR, indexIntoAB[meshCount.x][meshCount.y] = abl_probe_index); // Keep looping till a reachable point is found if (position_is_reachable(probePos)) break; ++abl_probe_index; } // Is there a next point to move to? if (abl_probe_index < abl_points) { _manual_goto_xy(probePos); // Can be used here too! // Disable software endstops to allow manual adjustment // If G29 is not completed, they will not be re-enabled SET_SOFT_ENDSTOP_LOOSE(true); G29_RETURN(false); } else { // Leveling done! Fall through to G29 finishing code below SERIAL_ECHOLNPGM("Grid probing done."); // Re-enable software endstops, if needed SET_SOFT_ENDSTOP_LOOSE(false); } #elif ENABLED(AUTO_BED_LEVELING_3POINT) // Probe at 3 arbitrary points if (abl_probe_index < abl_points) { probePos = points[abl_probe_index]; _manual_goto_xy(probePos); // Disable software endstops to allow manual adjustment // If G29 is not completed, they will not be re-enabled SET_SOFT_ENDSTOP_LOOSE(true); G29_RETURN(false); } else { SERIAL_ECHOLNPGM("3-point probing done."); // Re-enable software endstops, if needed SET_SOFT_ENDSTOP_LOOSE(false); if (!dryrun) { vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal(); if (planeNormal.z < 0) planeNormal *= -1; planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal); // Can't re-enable (on error) until the new grid is written abl_should_enable = false; } } #endif // AUTO_BED_LEVELING_3POINT #else // !PROBE_MANUALLY { const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE; measured_z = 0; #if ABL_GRID bool zig = PR_OUTER_END & 1; // Always end at RIGHT and BACK_PROBE_BED_POSITION measured_z = 0; xy_int8_t meshCount; // Outer loop is X with PROBE_Y_FIRST enabled // Outer loop is Y with PROBE_Y_FIRST disabled for (PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_END && !isnan(measured_z); PR_OUTER_VAR++) { int8_t inStart, inStop, inInc; if (zig) { // Zig away from origin inStart = 0; // Left or front inStop = PR_INNER_END; // Right or back inInc = 1; // Zig right } else { // Zag towards origin inStart = PR_INNER_END - 1; // Right or back inStop = -1; // Left or front inInc = -1; // Zag left } zig ^= true; // zag // An index to print current state uint8_t pt_index = (PR_OUTER_VAR) * (PR_INNER_END) + 1; // Inner loop is Y with PROBE_Y_FIRST enabled // Inner loop is X with PROBE_Y_FIRST disabled for (PR_INNER_VAR = inStart; PR_INNER_VAR != inStop; pt_index++, PR_INNER_VAR += inInc) { probePos = probe_position_lf + gridSpacing * meshCount.asFloat(); TERN_(AUTO_BED_LEVELING_LINEAR, indexIntoAB[meshCount.x][meshCount.y] = ++abl_probe_index); // 0... // Avoid probing outside the round or hexagonal area if (TERN0(IS_KINEMATIC, !probe.can_reach(probePos))) continue; if (verbose_level) SERIAL_ECHOLNPAIR("Probing mesh point ", int(pt_index), "/", abl_points, "."); TERN_(HAS_DISPLAY, ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_PROBING_MESH), int(pt_index), int(abl_points))); measured_z = faux ? 0.001f * random(-100, 101) : probe.probe_at_point(probePos, raise_after, verbose_level); if (isnan(measured_z)) { set_bed_leveling_enabled(abl_should_enable); break; // Breaks out of both loops } #if ENABLED(PROBE_TEMP_COMPENSATION) temp_comp.compensate_measurement(TSI_BED, thermalManager.degBed(), measured_z); temp_comp.compensate_measurement(TSI_PROBE, thermalManager.degProbe(), measured_z); TERN_(USE_TEMP_EXT_COMPENSATION, temp_comp.compensate_measurement(TSI_EXT, thermalManager.degHotend(), measured_z)); #endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) mean += measured_z; eqnBVector[abl_probe_index] = measured_z; eqnAMatrix[abl_probe_index + 0 * abl_points] = probePos.x; eqnAMatrix[abl_probe_index + 1 * abl_points] = probePos.y; eqnAMatrix[abl_probe_index + 2 * abl_points] = 1; incremental_LSF(&lsf_results, probePos, measured_z); #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) const float z = measured_z + zoffset; z_values[meshCount.x][meshCount.y] = z; TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(meshCount, z)); #endif abl_should_enable = false; idle_no_sleep(); } // inner } // outer #elif ENABLED(AUTO_BED_LEVELING_3POINT) // Probe at 3 arbitrary points LOOP_L_N(i, 3) { if (verbose_level) SERIAL_ECHOLNPAIR("Probing point ", int(i + 1), "/3."); TERN_(HAS_DISPLAY, ui.status_printf_P(0, PSTR(S_FMT " %i/3"), GET_TEXT(MSG_PROBING_MESH), int(i + 1))); // Retain the last probe position probePos = points[i]; measured_z = faux ? 0.001 * random(-100, 101) : probe.probe_at_point(probePos, raise_after, verbose_level); if (isnan(measured_z)) { set_bed_leveling_enabled(abl_should_enable); break; } points[i].z = measured_z; } if (!dryrun && !isnan(measured_z)) { vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal(); if (planeNormal.z < 0) planeNormal *= -1; planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal); // Can't re-enable (on error) until the new grid is written abl_should_enable = false; } #endif // AUTO_BED_LEVELING_3POINT TERN_(HAS_DISPLAY, ui.reset_status()); // Stow the probe. No raise for FIX_MOUNTED_PROBE. if (probe.stow()) { set_bed_leveling_enabled(abl_should_enable); measured_z = NAN; } } #endif // !PROBE_MANUALLY // // G29 Finishing Code // // Unless this is a dry run, auto bed leveling will // definitely be enabled after this point. // // If code above wants to continue leveling, it should // return or loop before this point. // if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position); #if ENABLED(PROBE_MANUALLY) g29_in_progress = false; TERN_(LCD_BED_LEVELING, ui.wait_for_move = false); #endif // Calculate leveling, print reports, correct the position if (!isnan(measured_z)) { #if ENABLED(AUTO_BED_LEVELING_BILINEAR) if (!dryrun) extrapolate_unprobed_bed_level(); print_bilinear_leveling_grid(); refresh_bed_level(); TERN_(ABL_BILINEAR_SUBDIVISION, print_bilinear_leveling_grid_virt()); #elif ENABLED(AUTO_BED_LEVELING_LINEAR) // For LINEAR leveling calculate matrix, print reports, correct the position /** * solve the plane equation ax + by + d = z * A is the matrix with rows [x y 1] for all the probed points * B is the vector of the Z positions * the normal vector to the plane is formed by the coefficients of the * plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0 * so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z */ struct { float a, b, d; } plane_equation_coefficients; finish_incremental_LSF(&lsf_results); plane_equation_coefficients.a = -lsf_results.A; // We should be able to eliminate the '-' on these three lines and down below plane_equation_coefficients.b = -lsf_results.B; // but that is not yet tested. plane_equation_coefficients.d = -lsf_results.D; mean /= abl_points; if (verbose_level) { SERIAL_ECHOPAIR_F("Eqn coefficients: a: ", plane_equation_coefficients.a, 8); SERIAL_ECHOPAIR_F(" b: ", plane_equation_coefficients.b, 8); SERIAL_ECHOPAIR_F(" d: ", plane_equation_coefficients.d, 8); if (verbose_level > 2) SERIAL_ECHOPAIR_F("\nMean of sampled points: ", mean, 8); SERIAL_EOL(); } // Create the matrix but don't correct the position yet if (!dryrun) planner.bed_level_matrix = matrix_3x3::create_look_at( vector_3(-plane_equation_coefficients.a, -plane_equation_coefficients.b, 1) // We can eliminate the '-' here and up above ); // Show the Topography map if enabled if (do_topography_map) { float min_diff = 999; auto print_topo_map = [&](PGM_P const title, const bool get_min) { serialprintPGM(title); for (int8_t yy = abl_grid_points.y - 1; yy >= 0; yy--) { LOOP_L_N(xx, abl_grid_points.x) { const int ind = indexIntoAB[xx][yy]; xyz_float_t tmp = { eqnAMatrix[ind + 0 * abl_points], eqnAMatrix[ind + 1 * abl_points], 0 }; apply_rotation_xyz(planner.bed_level_matrix, tmp); if (get_min) NOMORE(min_diff, eqnBVector[ind] - tmp.z); const float subval = get_min ? mean : tmp.z + min_diff, diff = eqnBVector[ind] - subval; SERIAL_CHAR(' '); if (diff >= 0.0) SERIAL_CHAR('+'); // Include + for column alignment SERIAL_ECHO_F(diff, 5); } // xx SERIAL_EOL(); } // yy SERIAL_EOL(); }; print_topo_map(PSTR("\nBed Height Topography:\n" " +--- BACK --+\n" " | |\n" " L | (+) | R\n" " E | | I\n" " F | (-) N (+) | G\n" " T | | H\n" " | (-) | T\n" " | |\n" " O-- FRONT --+\n" " (0,0)\n"), true); if (verbose_level > 3) print_topo_map(PSTR("\nCorrected Bed Height vs. Bed Topology:\n"), false); } //do_topography_map #endif // AUTO_BED_LEVELING_LINEAR #if ABL_PLANAR // For LINEAR and 3POINT leveling correct the current position if (verbose_level > 0) planner.bed_level_matrix.debug(PSTR("\n\nBed Level Correction Matrix:")); if (!dryrun) { // // Correct the current XYZ position based on the tilted plane. // if (DEBUGGING(LEVELING)) DEBUG_POS("G29 uncorrected XYZ", current_position); xyze_pos_t converted = current_position; planner.force_unapply_leveling(converted); // use conversion machinery // Use the last measured distance to the bed, if possible if ( NEAR(current_position.x, probePos.x - probe.offset_xy.x) && NEAR(current_position.y, probePos.y - probe.offset_xy.y) ) { const float simple_z = current_position.z - measured_z; if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Probed Z", simple_z, " Matrix Z", converted.z, " Discrepancy ", simple_z - converted.z); converted.z = simple_z; } // The rotated XY and corrected Z are now current_position current_position = converted; if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position); } #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) if (!dryrun) { if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("G29 uncorrected Z:", current_position.z); // Unapply the offset because it is going to be immediately applied // and cause compensation movement in Z const float fade_scaling_factor = TERN(ENABLE_LEVELING_FADE_HEIGHT, planner.fade_scaling_factor_for_z(current_position.z), 1); current_position.z -= fade_scaling_factor * bilinear_z_offset(current_position); if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR(" corrected Z:", current_position.z); } #endif // ABL_PLANAR // Auto Bed Leveling is complete! Enable if possible. planner.leveling_active = dryrun ? abl_should_enable : true; } // !isnan(measured_z) // Restore state after probing if (!faux) restore_feedrate_and_scaling(); // Sync the planner from the current_position if (planner.leveling_active) sync_plan_position(); #if HAS_BED_PROBE probe.move_z_after_probing(); #endif #ifdef Z_PROBE_END_SCRIPT if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT); planner.synchronize(); process_subcommands_now_P(PSTR(Z_PROBE_END_SCRIPT)); #endif #if ENABLED(DWIN_CREALITY_LCD) DWIN_CompletedLeveling(); #endif report_current_position(); G29_RETURN(isnan(measured_z)); } #endif // HAS_ABL_NOT_UBL